2017-2019 Honda CR-V Part

Product Description

Replace a damaged passenger-side bumper retainer with this premium aftermarket front bumper support bracket for the right side of the 2017-2019 Honda CR-V.

Installed near the right headlight and fender edge, the bracket provides an attachment point for the side of the front bumper cover. It helps support the bumper corner, maintain consistent bumper-to-fender spacing, and reduce movement caused by damaged or missing original mounting tabs.

Constructed from rigid automotive-grade polymer, this replacement bracket is formed with application-specific mounting holes, locating points, and retaining features. The unpainted textured-black finish matches the functional appearance of the original concealed structural component.

This listing includes the right passenger-side bracket only. The opposite-side bracket and installation hardware are not included.

Reference Part Numbers

Package Includes

• 1 × Front right passenger-side bumper support bracket

The left driver-side bracket, mounting clips, bolts, screws, and nuts are not included.

Installation

Professional installation is recommended because bumper cover access may require removal of additional clips or fasteners.

Align the replacement bracket with all factories mounting locations before tightening the hardware. Broken bumper tabs, damaged fender edges, or distorted body panels should be repaired before final installation.

Compatibility Disclaimer

Fitment should be verified using the vehicle year, installation side, original bracket shape, mounting locations, and reference numbers. The bracket may not correct alignment problems caused by a deformed bumper cover or previous structural damage.

This product is an aftermarket replacement component and is not a genuine Honda OEM product. References to Honda, CR-V, OEM numbers, Partslink numbers, and Hollander numbers are provided solely to identify compatibility. Honda® and CR-V® are trademarks of their respective owner. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Product Description

Restore secure bumper-to-fender alignment with this premium aftermarket front bumper side support bracket for the left driver side of the 2017-2019 Honda CR-V.

Positioned near the left headlight and front fender edge, this structural retainer supports the side of the bumper cover and helps maintain an even panel gap between the bumper, fender, and surrounding front-end components. It is a suitable replacement for an original bracket with broken tabs, cracked mounting points, collision damage, or deformation.

The bracket is manufactured from rigid, impact-resistant automotive-grade polymer and features molded mounting holes, guide points, and retaining locations designed to correspond with the original bumper configuration. Its unpainted textured-black surface is intended for concealed structural installation and does not require painting.

This listing includes the left driver-side bracket only. Mounting clips, screws, bolts, nuts, the right-side bracket, and other bumper components are not included.

Reference Part Numbers

Package Includes

• 1 × Front left driver-side bumper support bracket

The right passenger-side bracket and all mounting hardware are sold separately.

Installation

Professional installation is recommended. Partial removal or loosening of the front bumper cover may be required to access the bracket.

Before securing the replacement, check the surrounding bumper cover, fender mounting edge, and attachment points for collision damage. Reuse the original hardware only if it remains complete and undamaged.

Compatibility Disclaimer

Verify the vehicle year, installation side, bracket shape, mounting-hole pattern, and reference numbers before purchase. Previous collision repairs or replacement bumper covers may affect alignment.

This product is an aftermarket replacement component and is not a genuine Honda OEM product. References to Honda, CR-V, OEM numbers, Partslink numbers, and Hollander numbers are provided solely to identify compatibility. Honda® and CR-V® are trademarks of their respective owner. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Product Description

Replace a damaged or missing lower bumper accent with this premium aftermarket lower grille molding for the right passenger side of the 2017-2019 Honda CR-V.

This application-specific garnish fits along the passenger-side outer border of the lower grille opening. Its curved profile and integrated mounting tabs are designed to follow the corresponding bumper surface, helping restore proper trim alignment and the original finished appearance of the front fascia.

Manufactured from durable automotive-grade ABS plastic, the molding features a smooth painted piano-black finish. The high-gloss surface complements CR-V bumper configurations originally equipped with matching glossy-black lower grille accents.

Only the right passenger-side molding is included with this listing. It is not sold as a left-and-right pair.

Reference Part Numbers

Package Includes

• 1 × Right passenger-side lower grille molding trim

The left-side molding, separate hardware, grille assembly, and surrounding bumper panels are not included.

Installation

Carefully remove the original molding without damaging the bumper attachment slots. Align the replacement molding’s integrated tabs with the corresponding mounting locations before pressing it into position.

Professional installation is recommended, especially if the bumper or nearby mounting points were previously damaged in a collision.

Compatibility Disclaimer

Confirm the year, side, original finish, molding profile, retaining-tab positions, and reference numbers before ordering. This painted trim is different from unpainted or textured matte-black molding configurations.

This product is an aftermarket replacement component and is not a genuine Honda OEM product. References to Honda, CR-V, OEM numbers, Partslink numbers, and Hollander numbers are provided solely to identify compatibility. Honda® and CR-V® are trademarks of their respective owner. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Product Description

Restore the finished appearance of your CR-V’s front bumper with this premium aftermarket lower grille molding trim for the left driver side.

Designed for the lower outer edge of the front grille opening, this single-side garnish follows the original bumper contours and uses molded retaining tabs for factory-style positioning. It replaces a scratched, cracked, faded, loose, or missing original trim strip while restoring a clean transition between the lower grille and surrounding bumper surfaces.

The molding is manufactured from impact-resistant automotive-grade ABS plastic and finished with a painted glossy piano-black surface. Its polished black appearance is intended for CR-V models equipped with the matching factory glossy-black lower grille trim package.

This listing includes the left driver-side molding only. The right passenger-side molding is sold separately.

Reference Part Numbers

Package Includes

• 1 × Left driver-side lower grille molding trim

The right-side molding, mounting clips, screws, and additional bumper components are not included.

Installation

The molding installs using the integrated retaining tabs and the vehicle’s corresponding bumper mounting locations. Remove any broken pieces or damaged clips from the original molding before positioning the replacement.

Professional installation is recommended to prevent damage to the painted surface or retaining tabs. Do not force the molding into place if the mounting points do not align.

Compatibility Disclaimer

Please verify the vehicle year, molding shape, mounting-tab arrangement, finish, and reference numbers before purchase. Paint appearance may vary slightly according to lighting, viewing angle, and the condition of surrounding factory trim.

This product is an aftermarket replacement component and is not a genuine Honda OEM product. References to Honda, CR-V, OEM numbers, Partslink numbers, and Hollander numbers are provided solely to identify compatibility. Honda® and CR-V® are trademarks of their respective owner. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Product Description

Restore the lower front-end protection and factory appearance of your Honda CR-V with this premium aftermarket front bumper lower valance panel.

Designed for 2017-2019 Honda CR-V pre-facelift models, this center lower panel mounts along the lowest edge of the front bumper. Its vehicle-specific contours and molded mounting locations are designed to align with the factory bumper structure for a secure, factory-style fit.

Constructed from flexible, impact-resistant automotive-grade polypropylene composite, the valance helps shield the lower bumper and underbody area from water, mud, gravel, and everyday road debris. The textured matte-black finish matches the original lower exterior trim and does not require painting.

This replacement is ideal for a factory valance that has become cracked, scraped, loose, deformed, or damaged by road impact.

Reference Part Numbers

Package Includes

• 1 × Complete front bumper lower valance panel assembly

Mounting clips, screws, retainers, brackets, and installation instructions are not included. The valance may consist of multiple interlocking molded sections, as shown in the product photos, and assembly may be required before installation.

Installation

Professional installation is recommended. Remove the damaged original valance and inspect all factory mounting points before installing the replacement.

Align all sections and mounting holes before fully securing the panel. Existing hardware may be reused if it remains undamaged; however, broken or missing clips and screws should be replaced to maintain proper alignment.

Compatibility Disclaimer

Vehicle equipment and bumper configurations may vary according to trim level, production date, and previous collision repairs. Verify the Partslink number, OEM reference number, overall panel shape, and mounting locations before purchase.

This product is an aftermarket replacement component and is not a genuine Honda OEM product. References to Honda, CR-V, OEM numbers, Partslink numbers, and Hollander numbers are provided solely to identify compatibility. Honda® and CR-V® are trademarks of their respective owner. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.