New Arrivals

Product Overview
Restore the front end of your Toyota RAV4 with this aftermarket front bumper cover fascia. Designed for 2022-2025 LE and XLE models, it is supplied in a primed black finish and requires professional preparation and painting.

This listing includes the front bumper cover bare shell only.

Part Number References

• OEM Reference: 52119-0R920
• Partslink: TO1000450

Package Includes

• 1 × Front Bumper Cover Fascia Bare Shell (Primed)

Important Note
Fits 2022-2025 Toyota RAV4 LE and XLE models. Confirm the original bumper shape, grille openings, and sensor layout before ordering. Limited or Adventure models may use a different configuration. Grilles, fog light bezels, sensors, and hardware are not included.

Paint and Installation Notice
The bumper cover is supplied primed and requires professional surface preparation and paint matching. Test-fit before painting. Professional installation is recommended.

Compatibility Disclaimer
This product is an aftermarket replacement component and is not a genuine Toyota OEM product. OEM reference numbers, vehicle names, and model names are provided solely for product identification and compatibility-reference purposes. Toyota® and RAV4® are registered trademarks of Toyota Motor Corporation. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Toyota Motor Corporation.

Replace a damaged or missing front engine under cover with this full-size splash shield assembly designed for the lower front underbody area of 2016-2021 Honda Civic models. The panel helps reduce direct exposure to water, mud, gravel, and road debris while providing broad coverage beneath the engine bay.

Constructed with a durable molded plastic body and an integrated metal reinforcement section, the assembly follows the original underbody layout for a direct replacement fit. The combination design provides added rigidity and protection across the center underside area while maintaining the factory-style mounting configuration.

Package Includes

• 1 × Front Engine Splash Shield / Under Cover Panel

Interchange Part Numbers

• OEM Reference: 74110-TBA-A00

Important Note This listing includes the front lower engine splash shield only. Mounting clips, screws, retainers, brackets, lower bumper panels, and other underbody components are not included unless otherwise stated. Before purchase, compare the original shield shape, mounting points, and underbody layout.

Compatibility Disclaimer This product is an aftermarket replacement component and is not a genuine Honda OEM product. OEM reference numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. Honda® and Civic® are trademarks of Honda Motor Co., Ltd. Vehicle, trim, body-style, engine, and configuration names are used only to identify applicable vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Buyers should verify the original underbody panel, body style, engine configuration, mounting points, and lower-body layout before purchase.

This Front Bumper Cover Fascia Bare Shell is designed as a replacement for the 2019-2021 Honda Civic Sedan and Coupe.

Constructed from flexible automotive-grade plastic, the panel follows the original-style front body contour and mounting layout. It is supplied in a primed, unpainted finish for professional paint preparation and color matching.

Package Includes

• 1 × Front Bumper Cover Fascia Bare Shell (primed)

Reference Numbers

• Partslink: HO1000322
• OEM Reference: 04711-TBA-A50ZZ

Vehicle Fitment Fits 2019-2021 Honda Civic Sedan and Coupe models (North America built, except Si). Confirm the original bumper design and mounting points before ordering. Does not fit Hatchback unless verified.

Not Included Upper grille, fog light bezels, lower inserts, emblem, brackets, retainers, clips, and mounting hardware are not included. Compatible original components may be transferred.

Paint and Installation Notice The bumper cover arrives primed and requires professional preparation and paint matching. Test-fit the part before painting. Professional installation is recommended.

Folded Shipping Notice The bumper may be folded for shipping. Temporary bends may appear after unpacking. Place it in a warm area and allow it to recover its shape before paint preparation. Use low, controlled heat only if necessary.

Compatibility Disclaimer Aftermarket replacement component. Not a genuine Honda OEM product. Honda® and Civic® are registered trademarks of Honda Motor Co., Ltd. Velnox Auto is not affiliated with Honda.

Product Overview
This front bumper cover fascia is designed for 2020-2022 Toyota Corolla SE and XSE models. It is a primed bare shell suitable for replacing a cracked, dented, or collision-damaged original bumper cover.

This listing includes the front bumper cover bare shell only.

Part Number References

• OEM Reference: 52119-F2922
• Partslink: TO1000460

Package Includes

• 1 × Front Bumper Cover Fascia Bare Shell (Primed)

Important Note
This version is for SE / XSE front bumper configurations. It does not fit L, LE, or XLE models. Confirm the original bumper shape and grille openings before ordering. Grilles, fog light bezels, and mounting hardware are not included.

Compatibility Disclaimer
This product is an aftermarket replacement component and is not a genuine Toyota OEM product. OEM reference numbers, vehicle names, and model names are provided solely for product identification and compatibility-reference purposes. Toyota® and Corolla® are registered trademarks of Toyota Motor Corporation. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Toyota Motor Corporation.

Replace worn or missing parking sensor covers with these durable black ABS covers. Designed for front and rear bumpers, they protect sensors from dirt, moisture, and road debris while restoring a clean factory appearance.

The snap-in design installs quickly on original mounting points without tools. Made from automotive-grade ABS for resistance to cracking, fading, and weather.

Key Features

• Durable black ABS construction
• Snap-in design for secure fit
• Protects sensors from dirt, dust, and debris
• Suitable for front and rear bumper applications
• Tool-free installation

Confirm the size and style match your original sensor covers before ordering.

Bring back the clean factory-style front end of your 2019-2021 Honda Civic with this replacement Front Upper Grille Assembly. This complete assembly features a black plastic grille base with a bright chrome horizontal center molding and a center Honda emblem, matching the refreshed appearance of the 2019-2021 Civic as shown in the product images.

The factory-style shape and mounting points allow the assembly to align properly with the original front bumper and surrounding components. It is designed to replace a damaged, cracked, faded, or missing original grille.

Reference Part Numbers

• OEM: 71121-TBA-A51
• Partslink: HO1200241

Package Includes
1 × Front Upper Grille Assembly (includes bright chrome center molding and center emblem as pictured)

Important Note
This listing includes the front upper grille assembly with chrome molding and emblem only. Front bumper cover, additional clips, bolts, and installation tools are not included. Compare all product photos, grille shape, chrome finish, and mounting points with your original part before ordering. Grille designs vary by body style, trim, and production location.

Vehicle Fitment
Fits 2019-2021 Honda Civic Sedan and Coupe (North American market). Suitable for non-Sport and non-Si models. Does not fit Sport or Si trims. Confirm original grille shape, trim level, and VIN before purchase.

Compatibility Disclaimer
This product is a replacement component and is not a genuine Honda OEM product. Vehicle names, model names, and other identifiers are provided solely for product identification and compatibility-reference purposes. Honda® and Civic® are trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.
Buyers should verify the original grille configuration, trim, and mounting points before purchase.

Bring back the clean factory-style front end of your 2016-2021 Honda Civic with this replacement Front Upper Radiator Support Cover (Sight Shield).This panel mounts above the radiator support and behind the front grille, helping conceal and protect upper radiator components while restoring a tidy engine-bay appearance.

Made from durable black polypropylene plastic and designed as a direct replacement for the original cover. Suitable for replacing a cracked, broken, faded, or missing original sight shield.

Reference Part Numbers

• OEM: 74127-TBA-A00
• Partslink: HO1224123

Package Includes
1 × Front Upper Radiator Support Cover / Sight Shield

Important Note
This listing includes the center radiator support access cover only. Mounting clips, bolts, grille, hood latch, and metal radiator support assembly are not included. Compare the original part shape and mounting points before ordering.

Vehicle Fitment
Fits 2016-2021 Honda Civic Sedan and 2016-2020 Civic Coupe (North American / US-Canada built). Suitable for most 1.5L and 2.0L configurations, including Si models.
Does not fit Civic Hatchback.
Does not fit 2022 or newer Civic models.
Japan-built Sedan models may require a different cover. Confirm original part, body style, and production location before purchase.

Compatibility Disclaimer
This product is an aftermarket replacement component and is not a genuine Honda OEM product. Vehicle names, model names, and other identifiers are provided solely for product identification and compatibility-reference purposes. Honda® and Civic® are trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.
Buyers should verify the original part, body style, and vehicle configuration before purchase.

Product Overview
Restore the lower front bumper appearance of your 2019-2021 Honda Civic with this aftermarket Front Bumper Lower Grille. Featuring a black finish and molded mounting points, this replacement grille helps maintain proper airflow through the lower bumper opening while restoring the original front-end look.

Designed for select 2019-2021 Civic Sedan and Coupe models equipped with the 1.5L turbocharged engine (non-Si). Suitable for replacing a cracked, damaged, or missing original lower grille.

Package Includes

• 1 × Front Bumper Lower Grille

Not Included
Front bumper cover, upper grille, fog light covers, emblems, and mounting hardware are not included.

Reference Numbers

• OEM Reference Number: 71115-TBC-A60
• Partslink Number: HO1036135

Important Note
Please compare the original part shape, mounting points, and lower bumper opening before purchasing. Fitment may vary by trim and body style.

Compatibility Disclaimer
This product is an aftermarket replacement component and is not a genuine Honda OEM product. OEM reference numbers, vehicle names, and model names are provided solely for product identification and compatibility-reference purposes. Honda® and Civic® are registered trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with Honda.

Product Overview
Restore the upper section of your front bumper with this aftermarket Front Bumper Upper Cover for 2021-2022 Honda Accord. Designed to replace a cracked, damaged, or missing original upper cover, this black molded plastic panel follows the factory contour and mounting layout.

The cover features multiple mounting holes and attachment points for proper alignment with the front bumper assembly. It is suitable for front-end repairs and helps restore the original upper bumper appearance without replacing the complete bumper cover.

Package Includes

• 1 × Front Bumper Upper Cover

Not Included
Bumper cover, grille, mounting hardware, and other components are not included.

Reference Numbers

• OEM Reference Number: 71105-TVA-F00ZZ

Important Note
Please compare the product images and mounting points with your original part before purchasing.

Compatibility Disclaimer
This product is an aftermarket replacement component and is not a genuine Honda OEM product. OEM reference numbers, vehicle names, and model names are provided solely for product identification and compatibility-reference purposes. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with Honda.

Product Overview
Restore proper grille support on your 2021-2022 Honda Accord with this aftermarket Front Grille Support Base. Designed as a replacement for a cracked, broken, or missing original support structure, this black plastic base helps secure the front grille assembly and maintain correct alignment with surrounding bumper components.

The molded support features multiple mounting points, reinforced sections, and a contoured shape that follows the factory layout. It is intended for use during front-end repairs or grille replacement and provides a practical alternative to replacing the complete grille assembly.

Package Includes

• 1 × Front Grille Support Base

Not Included
Grille assembly, emblem, trim pieces, and mounting hardware are not included.

Reference Numbers

• OEM Reference Number: 71112-TVA-F00

Important Note
This listing includes the grille support base only. Please compare the product images, mounting points, and original support shape before purchasing.

Compatibility Disclaimer
This product is an aftermarket replacement component and is not a genuine Honda OEM product. OEM reference numbers, vehicle names, and model names are provided solely for product identification and compatibility-reference purposes. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with Honda.

Refresh the front-end appearance of your Honda Accord with this aftermarket Front Upper Grille Molding in bright chrome.

Positioned across the upper front grille, this trim piece features a polished chrome-plated finish and a factory-style curved profile. It includes an integrated center opening for the Honda emblem and molded attachment points for proper alignment with the grille assembly.

Ideal for replacing a scratched, faded, cracked, or damaged original molding without replacing the complete grille.

Package Includes
1× Front Upper Grille Molding – Bright Chrome

Not Included
Honda emblem, complete grille assembly, surrounding trim, and separate installation hardware are not included.

Reference Numbers

• OEM: 71122-TVA-F00
• Partslink: HO1210177

Vehicle Fitment
Fits 2021-2022 Honda Accord sedan models. Confirm the original chrome finish and mounting configuration before ordering.

Installation
Professional installation is recommended. Transfer the original emblem if reusable. Test-fit before final installation.

Compatibility Disclaimer
This product is an aftermarket replacement component and is not a genuine Honda OEM product. Vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. Honda® and Accord® are trademarks of Honda Motor Co., Ltd. Vehicle, trim, body-style, and configuration names are used only to identify applicable vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.
Buyers should verify the original molding design, chrome finish, and mounting points before purchase.

Bring back the clean factory-style front end of your 2021-2022 Honda Accord with this Front Bumper Lower Cover Cap.

This replacement cover cap is designed to cover the designated section on the front bumper lower area. It helps restore the original appearance and protects the corresponding position from debris and minor impacts. Made from durable black molded plastic with factory-style mounting points.

Compare the original cover shape and attachment points before ordering.

Package Includes
1 × Front Bumper Lower Cover Cap

Not Included
Mounting clips, screws, and other hardware are not included.

Vehicle Fitment
Fits 2021-2022 Honda Accord. Confirm original cover configuration before purchase.

Compatibility Disclaimer
This is a replacement component and is not a genuine Honda OEM product. Honda® and Accord® are trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with Honda. Verify original part and configuration before ordering.

Restore your Honda Accord front bumper assembly with this aftermarket front bumper side air duct for the right passenger side.

Constructed from durable black plastic, this duct features a molded air-channel structure, reinforced sections, and integrated mounting tabs. It is designed to replace a cracked, broken, or missing original duct and restore the proper air-guiding arrangement within the front bumper.

Package Includes
1× Front Bumper Side Air Duct – Right Passenger Side

Not Included
Left side duct, mounting clips, screws, and other installation hardware.

Reference Number
OEM: 71312-TVA-F00

Vehicle Fitment
Fits 2021-2022 Honda Accord. Confirm original duct shape and mounting points before ordering. The right passenger side is determined from the driver’s seated position.

Installation
Professional installation is recommended. Test-fit before final installation.

Compatibility Disclaimer
This product is an aftermarket replacement component and is not a genuine Honda OEM product. Vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. Honda® and Accord® are trademarks of Honda Motor Co., Ltd. Vehicle, trim, body-style, and configuration names are used only to identify applicable vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.
Buyers should verify the original duct finish, trim configuration, body style, mounting points, and bumper design before purchase.

Restore your Honda Accord front bumper assembly with this aftermarket front bumper side air duct for the left driver side.

Constructed from durable black plastic, this duct features a molded air-channel structure, reinforced sections, and integrated mounting tabs. It is designed to replace a cracked, broken, or missing original duct and restore the proper air-guiding arrangement within the front bumper.

Package Includes
1× Front Bumper Side Air Duct – Left Driver Side

Not Included
Right side duct, mounting clips, screws, and other installation hardware.

Reference Number
OEM: 71317-TVA-F00

Vehicle Fitment
Fits 2021-2022 Honda Accord. Confirm original duct shape and mounting points before ordering. The left driver side is determined from the driver’s seated position.

Installation
Professional installation is recommended. Test-fit before final installation.

Compatibility Disclaimer
This product is an aftermarket replacement component and is not a genuine Honda OEM product. Vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. Honda® and Accord® are trademarks of Honda Motor Co., Ltd. Vehicle, trim, body-style, and configuration names are used only to identify applicable vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.
Buyers should verify the original duct finish, trim configuration, body style, mounting points, and bumper design before purchase.

Restore the clean, factory-style appearance of your Honda Accord rear bumper with this aftermarket lower garnish trim for the right passenger side.

Featuring a matte black finish and honeycomb-style mesh pattern, this replacement trim helps restore the finished look of the rear bumper. It is designed to replace a cracked, damaged, or missing original garnish without replacing the entire bumper assembly.

Package Includes
1× Rear Bumper Lower Garnish – Right Passenger Side

Not Included
Mounting clips, screws, and other installation hardware.

Reference Number
OEM: 71514-TVA-A10

Vehicle Fitment
Fits 2018-2022 Honda Accord. Confirm original garnish shape and mounting points before ordering. The right passenger side is determined from the driver’s seated position.

Installation
Professional installation is recommended. Test-fit before final installation.

Compatibility Disclaimer
This product is an aftermarket replacement component and is not a genuine Honda OEM product. Vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. Honda® and Accord® are trademarks of Honda Motor Co., Ltd. Vehicle, trim, body-style, and configuration names are used only to identify applicable vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.
Buyers should verify the original garnish finish, trim configuration, body style, mounting points, and bumper design before purchase.

Restore the clean, factory-style appearance of your Honda Accord rear bumper with this aftermarket lower garnish trim for the left driver side.

Featuring a matte black finish and honeycomb-style mesh pattern, this replacement trim helps restore the finished look of the rear bumper. It is designed to replace a cracked, damaged, or missing original garnish without replacing the entire bumper assembly.

Package Includes
1× Rear Bumper Lower Garnish – Left Driver Side

Not Included
Mounting clips, screws, and other installation hardware.

Reference Number
OEM: 71519-TVA-A10

Vehicle Fitment
Fits 2018-2022 Honda Accord. Confirm original garnish shape and mounting points before ordering. The left driver side is determined from the driver’s seated position.

Installation
Professional installation is recommended. Test-fit before final installation.

Compatibility Disclaimer
This product is an aftermarket replacement component and is not a genuine Honda OEM product. Vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. Honda® and Accord® are trademarks of Honda Motor Co., Ltd. Vehicle, trim, body-style, and configuration names are used only to identify applicable vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.
Buyers should verify the original garnish finish, trim configuration, body style, mounting points, and bumper design before purchase.

Premium aftermarket front fog light housing assembly for the left driver side of select 2016-2021 Honda Civic models equipped with factory-style H8 halogen fog lights.

The assembly features a clear glass lens, reflective inner housing, black outer housing, factory-style mounting tabs, and an adjustable aiming mechanism. It is designed to replace a cracked, cloudy, moisture-damaged, or missing driver-side fog lamp while retaining the vehicle’s original H8 bulb configuration.

Package Includes
1× Front left driver-side fog light housing

Not Included
H8 bulb, wiring harness, fog light bezel, mounting screws, and other hardware.

Reference Part Numbers

• PartsLink: HO2592143
• OEM: 33950-TBA-A01
• Replacement OEM: 33950-T5R-A01

Reference numbers are provided for comparison only. This product is an aftermarket replacement and is not manufactured or endorsed by Honda.

Installation Notes
Professional installation is recommended. Reuse the original H8 bulb and factory hardware if they remain serviceable. Check the mounting points, bulb socket, and original fog lamp configuration before installation.

Premium aftermarket front fog light housing assembly for the right passenger side of select 2016-2021 Honda Civic models equipped with factory-style H8 halogen fog lights.

The assembly features a clear glass lens, reflective inner housing, black outer housing, factory-style mounting tabs, and an adjustable aiming mechanism. It is designed to replace a cracked, cloudy, moisture-damaged, or missing passenger-side fog lamp while retaining the vehicle’s original H8 bulb configuration.

Package Includes
1× Front right passenger-side fog light housing

Not Included
H8 bulb, wiring harness, fog light bezel, mounting screws, and other hardware.

Reference Part Numbers

• PartsLink: HO2593143
• OEM: 33900-TBA-A01
• Replacement OEM: 33900-T5R-A01

Reference numbers are provided for comparison only. This product is an aftermarket replacement and is not manufactured or endorsed by Honda.

Installation Notes
Professional installation is recommended. Reuse the original H8 bulb and factory hardware if they remain serviceable. Check the mounting points, bulb socket, and original fog lamp configuration before installation.

Product Overview
Restore the rear end of your Toyota RAV4 with this aftermarket rear bumper cover fascia. Designed for 2013-2015 Limited models with parking sensor holes, it is supplied in a primed black finish and requires professional preparation and painting.

This listing includes the rear bumper cover bare shell only.

Part Number References

• OEM Reference: 52150-0R120
• Partslink: TO1100308

Package Includes

• 1 × Rear Bumper Cover Fascia Bare Shell (Primed, with Sensor Holes)

Important Note
Fits 2013-2015 Toyota RAV4 Limited models with factory parking sensor holes. Confirm the original bumper has sensor openings before ordering. Does not fit LE or XLE models without sensors. Reflectors, lower valance, sensors, and hardware are not included.

Paint and Installation Notice
The bumper cover is supplied primed and requires professional surface preparation and paint matching. Test-fit before painting. Professional installation is recommended. Sensors may require transfer.

Compatibility Disclaimer
This product is an aftermarket replacement component and is not a genuine Toyota OEM product. OEM reference numbers, vehicle names, and model names are provided solely for product identification and compatibility-reference purposes. Toyota® and RAV4® are registered trademarks of Toyota Motor Corporation. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Toyota Motor Corporation.

Replace a scratched or missing passenger-side grille molding with this chrome trim for 2017-2019 Honda CR-V.

Positioned below the right headlight, it follows the original grille contour.

Package Includes

• 1× Right Passenger-Side Chrome Grille Molding
• Partslink: HO1213121
• OEM Reference: 71123-TLA-A00

Not Included Left-side molding, center grille, clips, and hardware.

Important Note Right side only. Confirm mounting points before ordering.

Compatibility Disclaimer Aftermarket replacement. Not genuine Honda OEM. Honda® and CR-V® are trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with Honda.

Replace a cracked, broken, or missing driver-side front bumper support bracket with this aftermarket retainer. Designed for 2017-2022 Honda CR-V models, it helps secure and position the front bumper cover along the left fender edge.

Package Includes

• 1× Front Bumper Left Driver Side Support Bracket

Not Included Right-side bracket, bumper cover, clips, and mounting hardware.

Important Note Fits 2017-2022 Honda CR-V. Confirm the installation side and original bracket shape before ordering. This is a single left-side component only.

Compatibility Disclaimer Aftermarket replacement part. Not a genuine Honda OEM product. Honda® and CR-V® are trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with Honda.

This Front Headlight Bracket Right Passenger Side is designed for 2018-2020 Honda Accord and installs beneath the right headlamp assembly.

The reinforced molded construction supports the lower section of the passenger-side headlight and helps maintain proper alignment with the bumper and fender. It replaces a cracked, broken, or missing original bracket.

This listing includes one right passenger-side bracket only. The headlight assembly, bulbs, bumper cover, mounting hardware, and left-side bracket are not included.

Reference Numbers OEM Reference Number: 71140-TVA-A00

Package Includes

• 1 × Right Passenger-Side Headlight Support Bracket

Vehicle Fitment Fits 2018-2020 Honda Accord sedan models. Confirm the installation side and original bracket shape before ordering.

Installation Professional installation is recommended. Partial removal of the front bumper cover may be required. Original clips and fasteners may need to be reused.

Compatibility Disclaimer Aftermarket replacement part. Not a genuine Honda OEM product. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Velnox Auto is not affiliated with Honda.

Secure the driver-side fog light with this internal lower bumper support bracket for 2020-2022 Honda CR-V. It mounts behind the bumper and holds the fog lamp housing in the correct position.

Package Includes

• 1× Left Driver-Side Fog Light Support Bracket
• OEM Reference: 71166-TLA-A51 (non-Hybrid)

Important Note Left driver-side only. This is an internal mounting bracket, not the exterior fog light bezel. Fog light assembly, bezel, wiring, and hardware are not included. Please compare the original bracket shape and mounting points before ordering. Does not fit 2017-2019 pre-facelift models. Hybrid models may use a different OEM number.

Not Included Fog light assembly, exterior bezel, wiring, bulb, and mounting hardware.

Compatibility Disclaimer Aftermarket replacement component. Not a genuine Honda OEM product. Honda® and CR-V® are trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with Honda.

Replace a cracked or missing driver-side forward rear wheel arch molding with this piece for 2017-2022 Honda CR-V.

It mounts on the left rear door and protects the lower door edge.

Package Includes

• 1× Rear Left Driver-Side Forward Wheel Arch Molding
• Partslink: HO1790108
• OEM Reference: 75395-TLA-A01

Not Included Right-side molding and installation hardware.

Important Note This part mounts on the rear door, not the quarter panel. Confirm mounting points before ordering.

Compatibility Disclaimer Aftermarket replacement. Not genuine Honda OEM. Honda® and CR-V® are trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with Honda.

Secure the passenger-side fog light with this internal lower bumper support bracket for 2020-2022 Honda CR-V. It mounts behind the bumper and holds the fog lamp housing in the correct position.

Package Includes

• 1× Right Passenger-Side Fog Light Support Bracket
• OEM Reference: 71116-TLA-A51 (non-Hybrid)

Important Note Right passenger-side only. This is an internal mounting bracket, not the exterior fog light bezel. Fog light assembly, bezel, wiring, and hardware are not included. Please compare the original bracket shape and mounting points before ordering. Does not fit 2017-2019 pre-facelift models. Hybrid models may use a different OEM number.

Not Included Fog light assembly, exterior bezel, wiring, bulb, and mounting hardware.

Compatibility Disclaimer Aftermarket replacement component. Not a genuine Honda OEM product. Honda® and CR-V® are trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with Honda.