Toyota

Product Overview

Replacement rear right / passenger side bumper bracket for 2020-2026 Toyota Corolla Sedan models, including LE, SE, XLE, XSE, and Hybrid configurations. Installed at the rear passenger-side bumper corner, this retainer helps hold the bumper cover in place where it meets the fender-side mounting area. It uses the specified corner swivel-joint guide design for the 12th Gen TNGA Corolla platform. Ideal for replacing an original bracket that is cracked, loose, broken, or missing.

Sold individually — Rear Right / Passenger Side (RH), 1 Piece.

Part Number References

Package Includes

1x Rear Bumper Right Passenger Side Support Retainer Bracket

Rear Right / Passenger Side / RH — 1 Piece

Key Features

• Rear right / passenger side replacement

• Corner swivel-joint retainer guide design

• Helps keep the rear bumper corner securely positioned

• Designed for the specified 12th Gen Corolla sedan platform

• Compatible with the listed gasoline and Hybrid configurations

• Suitable for replacing a worn, cracked, damaged, or missing bracket

Installation Notice

Professional installation is recommended. Before installation, compare the replacement bracket with the original part and confirm that the mounting holes, guide tabs, bracket shape, and RH orientation line up correctly. The bracket should fit naturally at the mounting points. Do not force installation if the shape or attachment points are different.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd. 

Product Overview

Replacement rear left / driver side bumper bracket for 2020-2026 Toyota Corolla Sedan models, including LE, SE, XLE, XSE, and Hybrid configurations. This bracket fits at the rear driver-side bumper corner and uses the specified corner swivel-joint retainer guide design. It helps keep the bumper side edge properly supported and seated where it meets the rear fender area. A good replacement when the original bracket is cracked, loose, damaged, or missing.

Sold individually — Rear Left / Driver Side (LH), 1 Piece.

Part Number References

Package Includes

1x Rear Bumper Left Driver Side Support Retainer Bracket

Rear Left / Driver Side / LH — 1 Piece

Key Features

• Rear left / driver side replacement

• Corner swivel-joint retainer guide design

• Helps support the rear bumper corner at the side mounting area

• Designed for the specified 12th Gen Corolla sedan platform

• Covers the listed gasoline and Hybrid configurations

• Suitable for replacing a cracked, loose, broken, or missing bracket

Installation Notice

Professional installation is recommended. Compare the replacement bracket with the original part before installation. Make sure the mounting holes, guide tabs, bracket contour, and LH orientation line up correctly. Do not force installation if the shape or mounting points are different.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd. 

Product Overview

Replacement front right / passenger side bumper bracket for 2020-2026 Toyota Corolla Sedan models, including L, LE, SE, XLE, XSE, and Hybrid configurations. This retainer mounts along the passenger-side bumper-to-fender edge and helps keep the bumper cover properly supported at the outer side mounting area. It uses the specified fender-edge guide support retainer design for the 12th Gen TNGA Corolla platform. A practical replacement for an original bracket that is cracked, loose, broken, or missing.

Sold individually — Front Right / Passenger Side (RH), 1 Piece.

Part Number References

Package Includes

1x Front Bumper Right Passenger Side Support Retainer Bracket

Front Right / Passenger Side / RH — 1 Piece

Key Features

• Front right / passenger side replacement

• Fender-edge guide support retainer design

• Designed for the specified 12th Gen Corolla sedan platform

• Covers the listed gasoline and Hybrid configurations

• Helps keep the bumper side properly seated and supported

• Suitable for replacing a damaged, cracked, loose, or missing bracket

Installation Notice

Professional installation is recommended. Compare the replacement part with the original bracket before installation. Make sure the mounting holes, retaining tabs, overall contour, and RH orientation line up correctly. Do not force installation if the bracket shape or mounting points do not match.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd. 

Product Overview

Replacement front left / driver side bumper bracket for 2020-2026 Toyota Corolla Sedan models, including L, LE, SE, XLE, XSE, and Hybrid configurations. This bracket mounts along the driver-side bumper-to-fender edge and works as the side guide support for the front bumper cover. Its shape is designed for the specified 12th Gen TNGA Corolla platform, helping keep the bumper side properly seated when the original retainer is cracked, loose, broken, or missing.

Sold individually — Front Left / Driver Side (LH), 1 Piece.

Part Number References

Package Includes

1x Front Bumper Left Driver Side Support Retainer Bracket

Front Left / Driver Side / LH — 1 Piece

Key Features

• Front left / driver side replacement

• Fender-edge guide support retainer design

• Made for the specified 12th Gen Corolla sedan platform

• Covers the listed gasoline and Hybrid configurations

• Helps keep the bumper cover secure along the side mounting edge

• Suitable for replacing a cracked, loose, damaged, or missing original bracket

Installation Notice

Professional installation is recommended. Compare the new bracket with the original part before installation. Check the mounting holes, tabs, bracket contour, and LH orientation to make sure they line up correctly. Do not force installation if the mounting pattern or bracket shape is different.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd. 

Product Overview

Replacement front right / passenger side bumper bracket for 2017-2019 Toyota Corolla Sedan models, including L, LE, SE, XLE, and XSE trims. Mounted along the passenger-side bumper-to-fender edge, this retainer helps keep the bumper cover properly supported at the outer side mounting point. It uses the specified fender-edge guide support design and is a practical replacement when the original bracket is cracked, loose, broken, or missing.

Sold individually — Front Right / Passenger Side (RH), 1 Piece.

Part Number References

Package Includes

1x Front Bumper Right Passenger Side Support Retainer Bracket

Front Right / Passenger Side / RH — 1 Piece

Key Features

• Front right / passenger side replacement

• Fender-edge guide support retainer design

• Helps keep the bumper side securely positioned

• Made for the specified 2017-2019 Corolla sedan application

• Suitable for replacing a damaged, cracked, loose, or missing bracket

Installation Notice

Professional installation is recommended. Compare the replacement bracket with the original part before installation. Make sure the mounting holes, tabs, overall shape, and RH orientation line up correctly. Do not force installation if the mounting pattern does not match.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd. 

Product Overview

Replacement front left / driver side bumper bracket for 2017-2019 Toyota Corolla Sedan models, including L, LE, SE, XLE, and XSE trims. This bracket installs along the driver-side bumper-to-fender edge and works as the guide support for the bumper cover at that mounting point. It helps keep the bumper side properly seated and is a practical replacement when the original retainer is cracked, loose, broken, or missing.

Sold individually — Front Left / Driver Side (LH), 1 Piece.

Part Number References

Package Includes

1x Front Bumper Left Driver Side Support Retainer Bracket

Front Left / Driver Side / LH — 1 Piece

Key Features

• Front left / driver side replacement

• Fender-edge guide support retainer design

• Helps keep the bumper cover secure along the side mounting edge

• Designed for the specified 2017-2019 Corolla sedan application

• Suitable for replacing a cracked, loose, damaged, or missing bracket

Installation Notice

Professional installation is recommended. Compare the replacement bracket with the original part before installation. Make sure the mounting holes, tabs, bracket shape, and LH orientation line up correctly. Do not force installation if the mounting pattern does not match.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd. 

Product Overview

Replacement rear right / passenger side bumper bracket for 2014-2019 Toyota Corolla Sedan models, including L, LE, S, SE, XLE, and XSE trims. This retainer sits along the rear passenger-side bumper-to-fender edge and uses a flush-style side guide design to help keep the bumper corner seated and supported. It is a practical replacement when the original bracket has become cracked, loose, broken, or missing.

Sold individually — Rear Right / Passenger Side (RH), 1 Piece.

Part Number References

Package Includes

1x Rear Bumper Right Passenger Side Support Retainer Bracket

Rear Right / Passenger Side / RH — 1 Piece

Key Features

• Rear right / passenger side replacement

• Flush-style rear fender-edge retainer guide design

• Helps support the rear bumper corner at the side mounting point

• Designed for the specified Corolla sedan application

• Suitable for replacing a damaged, cracked, loose, or missing bracket

Installation Notice

Professional installation is recommended. Compare the replacement bracket with the original part before installation. Make sure the mounting holes, tabs, bracket shape, and RH orientation line up correctly. Do not force installation if the mounting pattern does not match.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd. 

Product Overview

Replacement rear left / driver side bumper bracket for 2014-2019 Toyota Corolla Sedan models, including L, LE, S, SE, XLE, and XSE trims. This retainer is installed along the rear bumper-to-fender edge and uses a flush-style side guide design to help keep the bumper corner properly supported and seated. It is a practical replacement when the original bracket becomes cracked, loose, broken, or missing.

Sold individually — Rear Left / Driver Side (LH), 1 Piece.

Part Number References

Package Includes

1x Rear Bumper Left Driver Side Support Retainer Bracket

Rear Left / Driver Side / LH — 1 Piece

Key Features

• Rear left / driver side replacement

• Flush-style rear fender-edge retainer guide design

• Helps keep the rear bumper corner properly supported

• Designed for the specified Corolla sedan application

• Suitable for replacing a cracked, loose, damaged, or missing bracket

Installation Notice

Professional installation is recommended. Compare the replacement bracket with the original part before installation. Make sure the mounting holes, retaining tabs, bracket shape, and LH orientation line up correctly. Do not force installation if the mounting pattern does not match.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd. 

Product Overview

Replacement front right / passenger side bumper bracket for 2014-2016 Toyota Corolla S and Special Edition Sedan models. This bracket installs at the passenger-side bumper-to-fender edge and uses the specified extended-ear support guide design. It helps keep the bumper cover properly supported along the side mounting area when the original bracket is cracked, loose, broken, or missing.

Sold individually — Right / Passenger Side (RH), 1 Piece.

Part Number References

Package Includes

1x Front Bumper Right Passenger Side Support Retainer Bracket

Right / Passenger Side / RH — 1 Piece

Key Features

• Front right / passenger side replacement

• Extended-ear fender-edge support guide design

• Helps support the bumper cover at the side mounting point

• Designed for the specified Corolla S and Special Edition sedan application

• Suitable for replacing a cracked, loose, damaged, or missing bracket

Installation Notice

Professional installation is recommended. Compare the replacement bracket with the original part before installation. Make sure the mounting holes, tabs, bracket shape, and RH orientation line up correctly. Do not force installation if the mounting pattern is different.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd. 

Product Overview

Replacement front left / driver side bumper bracket for 2014-2016 Toyota Corolla S and Special Edition Sedan models. This bracket mounts along the driver-side bumper-to-fender edge and uses the specified extended-ear support guide design. It helps keep the bumper cover properly supported at the side mounting point and is a practical replacement for a bracket that is cracked, broken, loose, or missing.

Sold individually — Left / Driver Side (LH), 1 Piece.

Part Number References

Package Includes

1x Front Bumper Left Driver Side Support Retainer Bracket

Key Features

• Front left / driver side replacement

• Extended-ear fender-edge support guide design

• Helps keep the bumper cover secure at the side mounting area

• Designed for the specified S and Special Edition sedan application

• Suitable for replacing a damaged, cracked, loose, or missing bracket

Installation Notice

Professional installation is recommended. Compare the replacement bracket with the original part before installation. Check that the mounting holes, retaining tabs, bracket shape, and LH orientation line up correctly. Do not force installation if the mounting pattern does not match.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd. 

Product Overview

Replacement front right / passenger side bumper bracket for 2014-2016 Toyota Corolla L, LE, and XLE Sedan models. This retainer sits along the passenger-side bumper-to-fender edge and helps hold the bumper cover in its proper position. It uses the specified short flat support guide design for this application. Suitable for replacing an original bracket that is cracked, broken, loose, or missing.

Sold individually — Right / Passenger Side (RH), 1 Piece.

Part Number References

Package Includes

1x Front Bumper Right Passenger Side Support Retainer Bracket

Key Features

• Front right / passenger side replacement

• Short flat fender-edge support guide design

• Helps keep the bumper cover securely positioned at the side edge

• Designed for the specified Corolla sedan application

• Suitable for replacing a damaged, cracked, loose, or missing bracket

Installation Notice

Professional installation is recommended. Before installation, compare the replacement with the original bracket to make sure the mounting holes, tabs, overall shape, and RH orientation line up correctly. Do not force installation if the mounting points do not match.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd. 

Product Overview

Replacement front left / driver side bumper bracket for 2014-2016 Toyota Corolla L, LE, and XLE Sedan models. This bracket mounts at the bumper-to-fender edge and helps keep the front bumper cover properly supported and aligned. It uses the specified short flat guide retainer design for this application. A practical replacement when the original bracket is cracked, broken, loose, or missing.

Sold individually — Left / Driver Side (LH), 1 Piece.

Part Number References

Package Includes

1x Front Bumper Left Driver Side Support Retainer Bracket

Key Features

• Front left / driver side replacement

• Short flat fender-edge retainer design

• Helps support the bumper cover along the side edge

• Designed for the specified Corolla sedan application

• Suitable for replacing a cracked, loose, broken, or missing bracket

Installation Notice

Professional installation is recommended. Compare the replacement bracket with the original part before installation. The mounting holes, retaining tabs, and overall shape should line up correctly. Do not force the bracket into place if the mounting pattern does not match.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd. 

Product Overview

This Rear Bumper Right Passenger Side Support Retainer Bracket is designed for 2018-2024 Toyota Camry Sedan models built on the TNGA XV70 platform, including the specified LE, SE, XSE, XLE, and Hybrid configurations. Located at the rear passenger-side bumper corner, this retainer helps secure the bumper cover where it meets the fender-side mounting area. Its corner swivel-joint guide configuration is designed to support proper bumper corner positioning and provide a stable replacement point when the original bracket is damaged, loose, cracked, or missing.

Sold individually — ONE Rear Right / Passenger Side (RH) bracket.

Fitment & Retainer Configuration Check

This bracket is designed specifically for the Rear Right / Passenger Side (RH) mounting position. Because rear bumper corner retainers depend on precise guide and tab placement, compare the replacement component with the original bracket before installation.

Check the following:

• Right / Passenger Side orientation

• Overall bracket contour

• Corner swivel-joint guide configuration

• Mounting-hole alignment

• Retaining-tab positions

• Part number match

Proper bracket geometry helps the bumper cover sit securely along the rear passenger-side corner.

Part Number References

Package Includes

1x Rear Bumper Right Passenger Side Support Retainer Mounting Bracket

Rear Right / Passenger Side / RH — 1 Piece

Key Features

• Rear passenger-side bumper retainer replacement

• Corner swivel-joint guide configuration

• Designed around the specified XV70 rear mounting layout

• Helps maintain secure bumper corner retention

• Supports proper bumper-to-fender side positioning

• Suitable for replacing a cracked, loose, broken, or missing original bracket

Installation Notice

Professional installation is recommended. Before final installation, compare the new bracket with the original component and verify the mounting holes, guide points, retaining tabs, overall contour, and RH orientation. The bracket should align naturally with the mounting area. Do not force installation if the mounting pattern or profile does not match.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd. 

Product Overview

This Rear Bumper Left Driver Side Support Retainer Bracket is designed for 2018-2024 Toyota Camry Sedan models on the TNGA XV70 platform, including the specified LE, SE, XSE, XLE, and Hybrid configurations. Positioned at the rear left bumper-to-fender side mounting area, this bracket uses a corner swivel-joint style retainer guide configuration to support the bumper cover at the outer rear corner and help keep the side edge properly secured.

Sold individually — ONE Rear Left / Driver Side (LH) bracket.

Fitment & Mounting Verification

This component is specifically intended for the Rear Left / Driver Side (LH) mounting position and should match the original rear corner retainer layout. Before installation, compare the replacement bracket with the original part and confirm:

• LH / Driver Side orientation

• Overall bracket shape

• Corner swivel-joint guide layout

• Mounting-hole positions

• Retaining tabs and contact points

• Part number match

A correct match is important for stable bumper corner retention and proper side-edge positioning.

Part Number References

Package Includes

1x Rear Bumper Left Driver Side Support Retainer Mounting Bracket

Rear Left / Driver Side / LH — 1 Piece

Key Features

• Rear Left / Driver Side specific replacement

• Rear fender-side retainer guide design

• Corner swivel-joint mounting configuration

• Helps stabilize the outer rear bumper corner

• Supports proper bumper side-edge retention

• Suitable for replacing a cracked, broken, loose, or missing original bracket

Installation Notice

Professional installation is recommended. Check the replacement bracket against the original component before securing it in place, with particular attention to the corner guide shape, mounting holes, retaining tabs, and LH orientation. The bracket should align naturally with the factory-style mounting points. Do not force installation if the profile or mounting locations do not correspond.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd. 

Product Overview

This Front Bumper Right Passenger Side Support Retainer Bracket is made for 2018-2024 Toyota Camry Sedan models on the TNGA XV70 platform, covering the specified LE, SE, XSE, XLE, TRD, and Hybrid configurations. Located at the front passenger-side bumper corner, the bracket works as the outer guide and support point between the bumper cover and fender-edge mounting area. It is intended to restore stable bumper retention when the original bracket is worn, cracked, broken, or no longer holding the bumper edge correctly.

Sold as ONE Front Right / Passenger Side (RH) bracket.

Fitment & Mounting Verification

This component is side-specific and intended for the Front Right / Passenger Side (RH) mounting position. For accurate fitment, compare the new bracket with the original retainer before installation, especially the:

• RH / Passenger Side orientation

• Bracket length and outer profile

• Mounting-hole pattern

• Guide-tab positions

• Retaining-point layout

• Part number reference

A correct match helps ensure the bumper cover seats properly along the passenger-side fender edge.

Part Number References

Package Includes

1x Front Bumper Right Passenger Side Support Retainer Mounting Bracket

Front Right / Passenger Side / RH — 1 Piece

Key Features

• Passenger-side front bumper support retainer

• Fender-edge support guide configuration

• Designed around the specified XV70 mounting layout

• Helps keep the bumper cover securely positioned at the side edge

• Suitable across the listed LE, SE, XSE, XLE, TRD, and Hybrid applications

• Ideal replacement for a loose, cracked, broken, or missing original bracket

Installation Notice

Professional installation is recommended. Before securing the bracket, make sure the mounting holes, guide tabs, bracket contour, and passenger-side orientation correspond with the original component. The bracket should align naturally with the mounting points. Do not force fitment if the profile or retaining points are different.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd. 

Product Overview

This Front Bumper Left Driver Side Support Retainer Bracket is designed for 2018-2024 Toyota Camry Sedan models across the specified TNGA XV70 platform, including LE, SE, XSE, XLE, TRD, and Hybrid configurations. Mounted along the front left bumper-to-fender edge, this retainer helps secure the bumper cover at its side mounting point and maintain proper panel positioning. Its vehicle-specific guide profile makes it a suitable replacement for a cracked, broken, weakened, or missing original bracket.

Sold individually — ONE Front Left / Driver Side (LH) bracket.

Fitment & Configuration Check

This bracket is intended for the specified 2018-2024 XV70 Camry sedan application and must match the original left-side mounting layout. Before purchase or installation, compare the replacement bracket with the original component and confirm:

• Left / Driver Side orientation

• Overall bracket profile

• Mounting-hole alignment

• Guide-tab and retaining-point layout

• Part number match

Correct mounting geometry is important for secure bumper-edge retention.

Part Number References

Package Includes

1x Front Bumper Left Driver Side Support Retainer Mounting Bracket

Key Features

• Vehicle-specific front left bumper retainer

• Fender-edge support guide configuration

• Helps secure the bumper cover along the side mounting edge

• Supports proper bumper-to-fender positioning

• Suitable for replacing a cracked, broken, loose, or missing original bracket

• Designed for the specified XV70 Camry sedan application

Installation Notice

Professional installation is recommended. Compare the replacement bracket with the original part before final installation, paying close attention to the mounting holes, guide tabs, bracket contour, and LH orientation. Do not force installation if the bracket shape or mounting points do not align correctly.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd. 

Product Overview

This Front Bumper Right Passenger Side Support Retainer Bracket is designed for 2015-2017 Toyota Camry LE, SE, XSE, and XLE Sedan models. Installed at the front right bumper-to-fender edge area, this bracket uses the specified fender-edge support guide retainer configuration to help maintain proper bumper side positioning and secure mounting.

This listing is for ONE Front Right / Passenger Side (RH) bracket only.

Critical Fitment & Hardware Configuration Notice

This bracket is specifically configured for the Front Right / Passenger Side (RH) on the specified 2015-2017 post-facelift sedan application. Bracket design may vary by model year, mounting layout, and installation side.

Before purchase, compare the replacement bracket with the original part and confirm:

• Front Right / Passenger Side mounting position

• Overall bracket shape

• Mounting-hole locations

• Retaining tabs and guide points

• Part number match

Please verify the installation side, bracket configuration, and part number before ordering.

Part Number References

Package Includes

1x Front Bumper Right Passenger Side Support Retainer Mounting Bracket

Key Features

• Front Right / Passenger Side specific replacement

• Fender-edge support guide retainer design

• Compatible with LE, SE, XSE, and XLE sedan configurations

• Helps restore secure front bumper side mounting

• Vehicle-specific mounting design

• Suitable for replacing a cracked, broken, damaged, or missing original bracket

Installation & Fitment Notice

Professional installation is recommended. Before installation, compare the replacement bracket with the original component to confirm the mounting pattern, bracket profile, retaining-tab locations, installation side, and part number. Do not force installation if the bracket configuration does not match the original component.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd. 

Product Overview

This Front Bumper Left Driver Side Support Retainer Bracket is designed for 2015-2017 Toyota Camry LE, SE, XSE, and XLE Sedan models. Installed at the front left bumper-to-fender edge area, this bracket uses the specified fender-edge guide support retainer configuration to help maintain proper bumper side positioning and secure mounting.

This listing is for ONE Front Left / Driver Side (LH) bracket only.

Critical Fitment & Hardware Configuration Notice

This bracket is specifically configured for the Front Left / Driver Side (LH) on the specified 2015-2017 post-facelift sedan application. Bracket design may vary by model year, mounting layout, and installation side. Before purchase, compare the replacement bracket with the original part and confirm:

• Front Left / Driver Side mounting position

• Overall bracket shape

• Mounting-hole locations

• Retaining tabs and guide points

• Part number match

Please verify the installation side, bracket configuration, and part number before ordering.

Part Number References

Package Includes

1x Front Bumper Left Driver Side Support Retainer Mounting Bracket

Key Features

• Front Left / Driver Side specific replacement

• Fender-edge guide support retainer design

• Compatible with LE, SE, XSE, and XLE sedan configurations

• Helps restore secure front bumper side mounting

• Vehicle-specific mounting design

• Suitable for replacing a cracked, broken, damaged, or missing original bracket

Installation & Fitment Notice

Professional installation is recommended. Before installation, compare the replacement bracket with the original component to confirm the mounting pattern, bracket profile, retaining-tab locations, installation side, and part number. Do not force installation if the bracket configuration does not match the original component.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd. 

Product Overview

This Rear Bumper Right Passenger Side Support Retainer Bracket is designed for 2012-2017 Toyota Camry SE, SE Sport, and XSE Sedan models. Installed at the rear right bumper-to-fender edge area, this bracket uses the Legacy Sport-spec side retainer guide configuration to help maintain proper bumper side positioning and secure mounting.

This listing is for ONE Rear Right / Passenger Side (RH) bracket only.

Critical Fitment & Hardware Configuration Notice

This bracket is specifically configured for the Rear Right / Passenger Side (RH) and uses the Legacy Sport-spec rear fender-edge retainer guide layout. Bracket design may vary by trim level, mounting configuration, and installation side. Before purchase, compare the replacement bracket with the original part and confirm:

• Rear Right / Passenger Side mounting position

• Overall bracket shape

• Legacy Sport-spec configuration

• Mounting-hole locations

• Retaining tabs and guide points

• Part number match

Part Number References

Package Includes

1x Rear Bumper Right Passenger Side Support Retainer Mounting Bracket

Key Features

• Rear Right / Passenger Side specific replacement

• Legacy Sport-spec retainer guide configuration

• Vehicle-specific mounting design

• Helps restore secure rear bumper side mounting

• Suitable for replacing a cracked, broken, damaged, or missing original bracket

Installation & Fitment Notice

Professional installation is recommended. Before installation, compare the replacement bracket with the original component to confirm the mounting pattern, bracket profile, retaining-tab locations, installation side, and part number. Do not force installation if the bracket configuration does not match the original component.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd. 

Product Overview

This Rear Bumper Left Driver Side Support Retainer Bracket is designed for 2012-2017 Toyota Camry SE, SE Sport, and XSE Sedan models. Mounted at the rear left bumper-to-fender edge area, this bracket features the Legacy Sport-spec side retainer guide configuration, helping support proper rear bumper side positioning and alignment.

This listing is for ONE Rear Left / Driver Side (LH) bracket only.

Critical Fitment & Hardware Configuration Notice

This bracket is specifically configured for the Rear Left / Driver Side (LH) and uses the rear fender-edge side retainer guide Legacy Sport-spec layout. Bracket design may vary by trim level, mounting layout, and installation side.

Before purchase, compare the replacement bracket with the original part and confirm:

• Rear Left / Driver Side mounting position

• Overall bracket shape

• Legacy Sport-spec configuration

• Mounting-hole locations

• Retaining tabs and guide points

• Part number match

Part Number References

Package Includes

1x Rear Bumper Left Driver Side Support Retainer Mounting Bracket

Key Features

• Rear Left / Driver Side specific replacement

• Legacy Sport-spec rear fender-edge retainer guide configuration

• Helps maintain proper rear bumper side support and alignment

• Designed for the specified vehicle and mounting position

• Suitable for replacing a cracked, broken, damaged, or missing original bracket

Installation & Fitment Notice

Professional installation is recommended. Before installation, compare the replacement bracket with the original component to confirm the mounting pattern, bracket profile, retaining-tab locations, installation side, and part number. Do not force installation if the bracket configuration does not match the original component.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd. 

Product Overview

This Front Bumper Right Passenger Side Support Retainer Bracket is designed for 2012-2014 Toyota Camry SE and SE Sport Sedan models. Mounted at the front right bumper-to-fender edge area, it features an extended-ear guide retainer configuration that helps support proper bumper side positioning and alignment.

This listing is for ONE Front Right / Passenger Side (RH) bracket only.

Critical Fitment & Hardware Configuration Notice

This bracket is specifically configured for the Front Right / Passenger Side (RH) and uses an extended-ear fender edge guide retainer layout.  Bracket design may vary by trim level, mounting layout, and installation side. Before purchase, compare the replacement bracket with the original part and confirm:

• Front Right / Passenger Side mounting position

• Overall bracket shape

• Extended-ear design

• Mounting-hole locations

• Retaining tabs and guide points

• Part number match

Please verify the installation side, bracket configuration, and part number before ordering

Part Number References

Package Includes

1x Front Bumper Right Passenger Side Support Retainer Mounting Bracket

Key Features

• Front Right / Passenger Side specific replacement

• Extended-ear guide retainer configuration

• Helps maintain proper front bumper side support and alignment

• Designed for the specified vehicle and mounting position

• Suitable for replacing a cracked, broken, damaged, or missing original bracket

Installation & Fitment Notice

Professional installation is recommended. Before installation, compare the replacement bracket with the original component to confirm the mounting pattern, bracket profile, retaining-tab locations, installation side, and part number. Do not force installation if the bracket configuration does not match the original component.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd. 

Product Overview

This Front Bumper Left Driver Side Support Retainer Bracket is designed as a vehicle-specific replacement for 2012-2014 Toyota Camry SE and SE Sport Sedan models. Mounted at the front left bumper-to-fender edge area, this bracket features the extended-ear guide retainer configuration required for the specified application, helping restore proper bumper side support and alignment.

This listing is for ONE Front Left / Driver Side (LH) bracket only.

Critical Fitment & Hardware Configuration Notice

This bracket is specifically configured for the Front Left / Driver Side (LH) and uses an extended-ear fender edge guide retainer layout. Front bumper retainers may differ by trim level, mounting layout, and installation side. Before purchase, compare the replacement bracket with the original part and confirm:

• Front Left / Driver Side mounting position

• Overall bracket shape

• Extended-ear design

• Mounting-hole locations

• Retaining tabs and guide points

• Part number match

Please verify the installation side, bracket configuration, and part number before ordering.

Part Number References

Package Includes

1x Front Bumper Left Driver Side Support Retainer Mounting Bracket

Front Left / Driver Side / LH — 1 Piece

Key Features

• Front Left / Driver Side specific replacement

• Extended-ear guide retainer configuration

• Helps support proper front bumper side alignment

• Vehicle-specific mounting design

• Suitable for replacing a cracked, broken, damaged, or missing original bracket

• Designed for direct replacement on the specified application

Installation & Fitment Notice

Professional installation is recommended. Before installation, compare the replacement bracket with the original component to confirm the mounting pattern, bracket profile, retaining-tab locations, installation side, and part number. Do not force installation if the bracket configuration does not match the original component.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd. 

Product Overview

This Rear Bumper Right Passenger Side Support Retainer Bracket is designed as a vehicle-specific replacement for the specified 2012-2017 Toyota Camry LE and XLE Sedan configuration. Mounted at the rear right bumper-to-fender edge area, this bracket uses a flush-spec rear fender-edge side retainer guide design to help support the bumper side edge and maintain proper alignment.

This listing is for ONE Rear Right / Passenger Side (RH) bracket only.

Critical Fitment & Hardware Configuration Notice

This bracket is specifically configured for the Rear Right / Passenger Side (RH) and uses the rear fender-edge side retainer guide flush-spec layout. Rear bumper brackets may vary by trim level, mounting layout, and installation side. Before purchase, compare the replacement bracket with the original part and confirm:

• Rear Right / Passenger Side mounting position

• Overall bracket shape

• Mounting-hole locations

• Retaining tabs and guide points

• Part number match

Please verify the installation side, bracket shape, and part number before ordering.

Part Number References

Package Includes

1x Rear Bumper Right Passenger Side Support Retainer Mounting Bracket

Rear Right / Passenger Side / RH — 1 Piece

Key Features

• Rear Right / Passenger Side specific replacement

• Flush-spec rear fender-edge side retainer guide design

• Helps support proper rear bumper side positioning

• Vehicle-specific mounting configuration

• Suitable for replacing a cracked, broken, damaged, or missing original bracket

• Designed for direct replacement on the specified application

Installation & Fitment Notice

Professional installation is recommended. Before installation, compare the replacement bracket with the original component to confirm the mounting pattern, bracket profile, retaining-tab locations, installation side, and part number. Do not force installation if the bracket configuration does not match the original component.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd. 

Product Overview

This Rear Bumper Left Driver Side Support Retainer Bracket is designed as a vehicle-specific replacement for the specified 2012-2017 Toyota Camry LE and XLE Sedan configuration. It mounts at the rear left bumper-to-fender edge area and uses the flush-spec rear fender-edge side retainer guide design, helping restore proper bumper side support and alignment when the original bracket is cracked, broken, damaged, or missing.

This listing is for ONE Rear Left / Driver Side (LH) bracket only.

Critical Fitment & Hardware Configuration Notice

This bracket is specifically configured for the Rear Left / Driver Side (LH) and uses the rear fender-edge side retainer guide flush-spec layout. Rear bumper brackets may differ by trim level, mounting layout, and installation side。 Before purchase, compare the replacement bracket with the original part and confirm:

• Rear Left / Driver Side mounting position

• Overall bracket shape

• Mounting-hole locations

• Retaining tabs and guide points

• Part number references

Please verify the installation side, bracket shape, and part number before ordering.

Part Number References

Package Includes

1x Rear Bumper Left Driver Side Support Retainer Mounting Bracket

Rear Left / Driver Side / LH — 1 Piece

Key Features

• Rear Left / Driver Side specific replacement

• Flush-spec rear fender-edge side retainer guide design

• Helps restore secure bumper side mounting

• Supports proper bumper-to-body alignment

• Vehicle-specific replacement design

• Suitable for replacing a damaged, cracked, broken, or missing original bracket

Installation & Fitment Notice

Professional installation is recommended. Before installation, compare the replacement bracket with the original component to confirm the mounting pattern, bracket profile, retaining-tab locations, installation side, and part number references. Do not force installation if the bracket configuration does not match the original component.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd. 

Product Overview

This Front Bumper Right Passenger Side Support Retainer Bracket is designed as a vehicle-specific replacement for the specified 2012-2014 Toyota Camry LE and XLE Sedan configuration. Installed at the front right bumper-to-fender mounting area, this bracket helps support the bumper cover edge, maintain proper positioning, and restore a secure mounting point when the original retainer is cracked, broken, damaged, or missing.

This listing is for ONE Right / Passenger Side (RH) bracket only.

Critical Fitment & Hardware Configuration Notice

This bracket is specifically configured for the Right / Passenger Side (RH) and uses the short-spec fender edge support guide retainer design. Bumper support retainers may vary by trim level, mounting-point layout, production configuration, and installation side. Before purchase, compare the replacement bracket with the original part and confirm:

• Right / Passenger Side mounting position

• Overall bracket shape

• Mounting-hole locations

• Retaining tabs and guide points

• Part number references

Part Number References

Package Includes

1x Front Bumper Right Passenger Side Support Retainer Mounting Bracket

Right / Passenger Side / RH — 1 Piece

Key Features

• Designed for the front right / passenger-side bumper mounting position

• Helps restore proper bumper edge support and positioning

• Short-spec fender edge support guide retainer configuration

• Vehicle-specific replacement design

• Suitable for replacing a cracked, broken, damaged, or missing original retainer

• Designed to match the specified mounting configuration

Installation & Fitment Notice

Professional installation is recommended. Before installation, compare the replacement bracket directly with the original component to confirm the mounting pattern, bracket profile, retaining-tab locations, installation side, and part number references. Do not force installation if the bracket configuration does not match the original component.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd. 

Product Overview

This Front Bumper Left Driver Side Support Retainer Bracket is designed as a vehicle-specific replacement for the specified 2012-2014 Toyota Camry LE and XLE Sedan configuration. Installed at the front left bumper-to-fender mounting area, this bracket helps support the bumper cover edge, maintain proper positioning, and restore a secure mounting point when the original retainer is cracked, broken, damaged, or missing.

This listing is for ONE Left / Driver Side (LH) bracket only.

Critical Fitment & Hardware Configuration Notice

PLEASE VERIFY THE ORIGINAL BRACKET BEFORE ORDERING.

This bracket is specifically configured for the Left / Driver Side (LH) and uses the short-spec fender edge support guide retainer design. Bumper support retainers may vary by trim level, mounting-point layout, production configuration, and installation side. Before purchase, compare the replacement bracket with the original part and confirm:

• Left / Driver Side mounting position

• Overall bracket shape

• Mounting-hole locations

• Retaining tabs and guide points

• Part number references

Part Number References

Package Includes

1x Front Bumper Left Driver Side Support Retainer Mounting Bracket

Left / Driver Side / LH — 1 Piece

Key Features：

• Designed for the front left / driver-side bumper mounting position

• Helps restore proper bumper edge support and positioning

• Short-spec fender edge support guide retainer configuration

• Vehicle-specific replacement design

• Suitable for replacing a cracked, broken, damaged, or missing original retainer

• Designed to match the specified mounting configuration

Installation & Fitment Notice

Professional installation is recommended. Before installation, compare the replacement bracket directly with the original component to confirm the mounting pattern, bracket profile, retaining-tab locations, installation side, and part number references. Do not force installation if the bracket configuration does not match the original component.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd. 

Product Overview

Designed for 2022–2025 Toyota RAV4 Limited post-facelift models, this aftermarket rear bumper cover features four pre-molded backup radar sensor holes to match the corresponding flagship rear fascia configuration. Manufactured from durable automotive-grade impact-resistant plastic, the bumper cover is supplied in a black finish and provides a direct replacement solution for rear fascia panels affected by collision damage, cracks, deep scrapes, deformation, or previous repair work.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

Sensor & Application Verification

This bumper cover is intended specifically for 2022–2025 Toyota RAV4 Limited post-facelift configurations with four pre-molded rear backup radar sensor holes. Before ordering, compare the sensor-hole count and placement, reflector areas, lower bumper profile, mounting locations, and reference numbers with your original part. Non-sensor versions or other trim configurations may use a different rear fascia.

Components Not Included

This listing includes the rear bumper cover fascia shell only. Backup radar sensors, sensor brackets or retainers, reflectors, lower valance or garnish components, reinforcement parts, mounting hardware, and other surrounding rear bumper accessories are not included unless specifically stated in the package contents.

Finish & Installation

The bumper cover is supplied in a black exterior finish. The surface should be inspected before final installation to determine whether additional preparation or refinishing is required. Test-fit the bumper before final installation to verify sensor-hole positioning, reflector alignment, surrounding panel fitment, and mounting locations. Professional installation is recommended for the best finished result.

Packaging & Shape Recovery

Rear bumper covers are large, flexible exterior panels and may experience minor temporary flexing during packaging or transportation. After unpacking, allow the bumper cover to rest at room temperature and return to its natural contour before test-fitting or refinishing.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and RAV4® are registered trademarks of Toyota Motor Corporation. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, sensor configuration, and existing components before purchase.

Product Overview

Built for 2022–2025 Toyota RAV4 Limited post-facelift models, this aftermarket front bumper cover features two pre-molded front parking radar sensor holes to match the corresponding premium-trim fascia configuration. The shell is formed from durable automotive-grade impact-resistant plastic and supplied in a primed black finish for professional prep and refinishing. Its sensor-ready layout makes it a practical replacement for front bumpers affected by collision damage, cracks, heavy scrapes, deformation, or prior repair work.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

Radar & Fitment Check

This bumper cover is intended specifically for 2022–2025 Toyota RAV4 Limited post-facelift configurations with two pre-molded front parking radar sensor holes. Before ordering, compare the sensor-hole count and placement, grille openings, lower fascia profile, side openings, mounting locations, and reference numbers with your original bumper. Non-sensor or other trim-specific front fascia layouts may require a different cover.

Components Sold Separately

This listing includes the front bumper cover fascia shell only. Parking radar sensors, sensor brackets or retainers, grille components, side bezels or inserts, reinforcement parts, lighting components, emblems, mounting hardware, and other surrounding bumper accessories are not included unless specifically stated in the package contents.

Paint & Installation

The bumper cover is supplied in a primed black, unpainted finish and requires final surface preparation, color matching, and professional painting before installation. Test-fit the fascia before paintwork to verify sensor-hole positioning, grille alignment, and mounting-point fitment. Professional refinishing and installation are recommended for the best final result.

Packaging & Handling

Because front bumper covers are large, flexible exterior panels, minor temporary flexing may occur during packaging or transportation. After unpacking, allow the bumper cover to rest at room temperature and recover its natural contour before test-fitting, preparation, or painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and RAV4® are registered trademarks of Toyota Motor Corporation. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, radar configuration, and existing components before purchase.

Product Overview

This rear bumper cover is designed for 2022–2025 Toyota RAV4 LE & XLE post-facelift models without factory sensor holes, matching the standard rear fascia configuration used on these trims. Manufactured from durable automotive-grade impact-resistant plastic, the cover is supplied in a primed black finish for professional surface preparation and repainting. It provides a clean replacement solution for rear bumpers affected by cracks, scrapes, deformation, collision damage, or previous repair work.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

Fitment Confirmation

This bumper cover is intended specifically for 2022–2025 Toyota RAV4 LE & XLE post-facelift configurations without parking sensor holes. Before ordering, compare the rear bumper profile, reflector locations, lower contour, mounting areas, sensor-hole layout, and reference numbers with your original part. Sensor-equipped versions or other trim configurations may use a different rear fascia.

Parts Not Included

This listing includes the rear bumper cover fascia shell only. Reflectors, lower garnish or valance components, parking sensors, sensor brackets, retainers, reinforcement components, mounting hardware, and other surrounding rear bumper parts are not included unless specifically stated in the package contents.

Paint & Installation

The bumper cover is supplied in a primed black, unpainted finish and requires final surface preparation, color matching, and professional painting before installation. Test-fitting before paintwork is strongly recommended to confirm alignment with the quarter panels, reflector areas, and mounting points. Professional installation is recommended, especially when the vehicle has previous rear collision damage.

Packaging & Shape Recovery

Large bumper fascia panels are flexible by design and may show minor temporary movement in shape while packaged or transported. After unpacking, allow the bumper cover to rest at room temperature and return to its natural contour before test-fitting, preparation, or painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and RAV4® are registered trademarks of Toyota Motor Corporation. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, sensor configuration, and existing components before purchase.

Product Overview

Designed for the updated 2022–2025 Toyota RAV4 LE & XLE post-facelift front-end configuration, this aftermarket bumper cover offers a clean replacement solution for damaged, cracked, scraped, or previously repaired factory fascia panels. The cover is molded from durable automotive-grade impact-resistant plastic and supplied in a primed black finish for professional prep and refinishing. Its standard-trim profile is intended to match the LE/XLE bumper layout while providing a solid foundation for collision repair or cosmetic restoration.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

Fitment Verification

This bumper cover is intended for 2022–2025 Toyota RAV4 LE & XLE post-facelift models using the corresponding standard front bumper configuration. Before ordering, compare the bumper contour, grille openings, side insert areas, mounting locations, and reference numbers with the original part on your vehicle. Other trims may use a different fascia layout.

Components Sold Separately

This listing includes the front bumper cover fascia shell only. Grille assemblies, side bezels or inserts, brackets, retainers, reinforcement components, lighting parts, sensors, emblems, mounting hardware, and other surrounding bumper components are not included unless specifically listed in the package contents.

Paint Preparation & Installation

The supplied primed black finish is intended for professional refinishing and is not the vehicle’s final exterior color. Test-fit the bumper before painting to confirm alignment with the surrounding body panels, grille openings, and mounting points. Proper surface preparation, color matching, painting, and professional installation are recommended.

Packaging & Handling

Automotive bumper covers are flexible exterior panels and may experience minor temporary flexing during packaging or transportation. After unpacking, allow the bumper cover to rest at room temperature and recover its natural contour before test-fitting or beginning refinishing work.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and RAV4® are registered trademarks of Toyota Motor Corporation. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, and existing components before purchase.