Honda

Product Overview

Restore proper front bumper positioning with this complete left and right side retainer bracket set for the 2018–2022 Honda Accord. These brackets install behind the outer corners of the front bumper cover and help secure the bumper cover to the vehicle body. They are designed to replace cracked, broken, worn, or missing factory-style retainers that may cause loose bumper corners, uneven panel gaps, sagging edges, or poor alignment.

Package Includes

1x Complete Front Bumper Side Retainer Bracket Pair:

• 1x Left Driver-Side Bracket

• 1x Right Passenger-Side Bracket

Both left and right brackets are included together in one package.

This listing includes the two side retainer brackets only. The front bumper cover, screws, push clips, and other mounting hardware are not included unless specifically shown in the product images.

Reference Part Numbers

North American Interchange Numbers

• HO1142120 — Left Driver Side

• HO1143120 — Right Passenger Side

OEM Cross-Reference Numbers

• 71198-TVA-A01 — Left Driver Side

• 71193-TVA-A01 — Right Passenger Side

Reference numbers are provided for product identification and compatibility comparison purposes only.

Installation Notes

Installs at the factory mounting locations behind the left and right outer corners of the front bumper cover. Existing screws and push clips may be reused only if they remain undamaged and in serviceable condition. Replace any worn, broken, or missing mounting hardware before installation. Professional installation is recommended to ensure proper positioning, panel alignment, and secure attachment.

Important Fitment Notice

Designed for North American-specification 2018–2022 Honda Accord models. Before ordering, compare the listed reference numbers, bracket shape, mounting points, side orientation, and product photos with the original parts on your vehicle. Additional verification is recommended for vehicles with previous collision repairs, aftermarket bumper covers, modified body components, or missing original parts.

Compatibility Disclaimer

This is an aftermarket replacement product and is not an original equipment manufacturer part. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, or endorsed by Honda Motor Co., Ltd. Vehicle names, model years, trim names, OEM reference numbers, and interchange numbers are used solely for product identification and compatibility reference purposes.

Replace or upgrade the exterior trim along the outer upper-grille area near the headlights with a complete left and right garnish pair. Designed to follow the original front-end contours, these pieces help restore a clean factory-inspired appearance or create a darker Sport-style look.

Option 1: Factory-Style Edition

Factory-style extension garnishes designed to restore the original upper-grille appearance.

Option 2: Sport Blackout Edition

Glossy-black extension garnishes designed for a darker Sport-inspired front-end appearance.

Material and Installation

Injection-molded from automotive-grade ABS plastic for exterior durability and impact resistance. Designed for OE-style mounting using the vehicle’s matching attachment locations. Compare all tabs, contours and mounting points, and test-fit both sides before permanent installation. Professional installation is recommended.

Before Ordering - Designed for matching North American-specification 2016–2021 Honda Civic Sedan and Coupe configurations, including select LX, EX, EX-L, Sport and Touring models. Fitment may vary by model year, body style, trim level, production specification and original grille design. Compare the product photos, finish, dimensions, mounting tabs and original part numbers before ordering. Does not fit Civic Hatchback or Type R models.

Items Not Included

This listing includes the left and right garnish pair only. The center grille emblem, main grille assembly, bumper cover, reinforcement beam, headlights, clips and additional mounting hardware are not included unless specifically shown and stated.

Compatibility Disclaimer

This product is an aftermarket replacement and appearance-upgrade set and is not manufactured or supplied by Honda Motor Co., Ltd. OEM reference numbers, North American interchange numbers, vehicle names, trim names and body-style descriptions are provided solely for product identification and compatibility verification. Their use does not indicate that these products are genuine Honda OEM parts. Honda®, Civic® and related trademarks are the property of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, endorsed by or authorized by Honda Motor Co., Ltd.

Product Description

Choose the bundle that matches the vehicle’s original rear bumper, trunk garnish and tail-light configuration.

Option 1: Factory Chrome Edition

Rear bumper restoration package without tail-light assemblies.

Tail-light assemblies are not included with this bundle.

Option 2: Premium Blackout Upgrade 

Complete blackout-style package with outer and trunk-mounted LED tail-light assemblies.

Before Ordering - Compare the selected bundle with the vehicle’s original bumper shape, lower valance, trunk garnish, mounting points and lighting connectors. The LED tail lights included with the Premium Blackout Upgrade may require wiring adapters, resistors or installation adjustments depending on the vehicle’s original equipment. Verify connector and wiring compatibility before installation.

Finish and Installation

The bumper cover is supplied in a primed finish and requires preparation and painting. Glossy-black and textured-black components are supplied in their listed finishes. Test-fit all bumper and lighting components before painting or permanent installation. Professional body-shop and automotive electrical installation are recommended.

Items Not Included

Unless specifically listed under the selected bundle, parking sensors, exhaust trim, wiring adapters, load resistors, control modules, emblems, mounting hardware and paint materials are not included.

Compatibility Disclaimer

This product is an aftermarket replacement and restoration package and is not manufactured or supplied by Honda Motor Co., Ltd. OEM reference numbers, North American interchange numbers, vehicle names, trim names and body-style descriptions are provided solely for product identification and compatibility verification. Their use does not indicate that these products are genuine Honda OEM parts. Lighting installation requirements may vary depending on the vehicle’s original wiring, connectors and equipment configuration. Honda®, Civic® and related trademarks are the property of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, endorsed by or authorized by Honda Motor Co., Ltd.

Product Description

Choose the bundle that matches your vehicle’s original grille, bumper trim, sensor and headlight configuration.

Option 1: 10-Piece Structural Shield Bundle

Includes the primary bumper, reinforcement, lower grille, underbody shield, mounting supports and low-spec bumper trim components.

Option 2: 11-Piece Headlights Restoration Master Bundle

Adds a high-gloss piano-black upper grille and a left and right halogen headlight pair for a more complete front-end restoration.

Before Ordering - Compare the selected bundle with the vehicle’s original grille design, bumper openings, side trim, sensor equipment, headlight type and mounting points. The halogen headlights included with the 11-piece bundle may not replace every factory halogen or LED configuration used on 2019–2021 Civic Sedan and Coupe models. Verify the original housings, connectors, mounting tabs and reference numbers before ordering. The included radar sensor cover does not include the radar sensor, control module or mounting hardware.

Finish and Installation

The bumper cover is supplied in a primed finish and requires preparation and painting before installation. Gloss-black and textured-black components are supplied in their listed finishes. Test-fit all components before painting or permanent installation. Professional body-shop painting and installation are recommended.

Items Not Included

Unless specifically listed under the selected bundle, fog lights, bulbs, wiring harnesses, radar sensors, parking sensors, driver-assistance modules, grille emblems, LED modules, mounting hardware and paint materials are not included.

Compatibility Disclaimer

This is an aftermarket replacement and restoration package and is not manufactured or supplied by Honda Motor Co., Ltd. OEM reference numbers, North American interchange numbers, vehicle names, trim names and body-style descriptions are provided solely for identification and compatibility reference. Their use does not indicate that these products are genuine Honda OEM parts. Sensor, radar and lighting installation requirements may vary depending on the vehicle’s original wiring and equipment configuration. Buyers should verify compatibility before installation. Honda®, Civic® and related trademarks are the property of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, endorsed by or authorized by Honda Motor Co., Ltd.

Product Description

Choose between two front bumper restoration packages designed for different factory-style grille finishes and front-end configurations. Review the package contents, product photos and reference numbers before selecting an option.

Option 1: LX/EX Base Bundle — 10-Piece Package

Chrome-accent upper grille configuration. Headlight assemblies and upper grille side extension garnishes are not included.

Option 2: Sport/Si/Touring Spec — 12-Piece Package

Glossy piano-black upper grille configuration. Includes left and right halogen headlight assemblies and upper grille side extension garnishes.

Before Ordering - Select the package that matches the vehicle’s original grille finish, bumper openings, headlight type and mounting configuration. Compare the product photos and listed reference numbers with the original components before purchase. The halogen headlights included with the Sport/Si/Touring Spec package are not intended to replace factory LED headlights unless the housings, connectors and mounting points match.

Finish and Installation

The bumper cover is supplied in a primed finish and requires surface preparation and painting before installation. Chrome, glossy-black and textured-black components are supplied in their listed finishes. Test-fit all components before painting or permanent installation. Professional body-shop painting and installation are recommended.

Items Not Included

Unless specifically listed under the selected package, fog lights, wiring harnesses, parking sensors, radar components, driver-assistance equipment, grille emblems, LED modules, general mounting hardware and paint materials are not included.

Compatibility Disclaimer

This product is an aftermarket replacement and restoration package and is not manufactured or supplied by Honda Motor Co., Ltd. OEM reference numbers, North American interchange numbers, vehicle names, trim names and body-style descriptions are provided solely for product identification and compatibility verification. Their use does not indicate that this product is a genuine Honda OEM part. Lighting installation requirements may vary depending on the vehicle’s original wiring, connectors and equipment configuration. Buyers should verify compatibility before installation. Honda®, Civic® and related trademarks are the property of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, endorsed by or authorized by Honda Motor Co., Ltd.

Product Overview

Restore damaged, missing, or worn rear exterior components with this multi-piece Rear Bumper Restoration Kit, designed for compatible North American 2016–2018 Honda Civic Sedan pre-facelift models.

Two package options are available:

Select the package that matches your repair needs and review the complete contents below before ordering.

Option 1: Base Sedan Style - Tail Lights Not Included

Important: Outer rear tail lights, inner trunk-lid tail lights, tail-light wiring components, and the glossy piano-black trunk garnish are not included with the Base Sedan Style.

Option 2: 10-Piece Master Bundle - Outer and Inner LED Tail Lights Included

Important: The 10-Piece Master Bundle includes the glossy piano-black trunk garnish instead of the chrome garnish. Both garnish finishes are not included together.

Important Fitment Notice

Designed for compatible North American 2016–2018 Honda Civic Sedan pre-facelift models using the matching rear bumper, trunk-garnish, and lighting configuration.

Sedan models only. Does not fit Coupe or Hatchback models.

Verify the original bumper design, body style, trim configuration, electrical connectors, OEM reference numbers, and listed North American interchange numbers before ordering. Refer to the external vehicle fitment chart for complete compatibility details. The upgraded LED tail lights included with the 10-Piece Master Bundle may require wiring adjustments, adapters, resistors, or professional electrical installation depending on the vehicle’s original equipment.

Finish & Installation

The rear bumper cover is supplied in a primed finish and requires surface preparation, color matching, and painting before installation. The lower valance and related textured components are supplied in their stated finishes. Chrome, glossy-black, reflector, and lighting components should be protected during paint preparation. Test-fit all panels, brackets, trim pieces, reflectors, garnish panels, and lighting assemblies before painting, wiring, drilling, cutting, or making permanent modifications. Minor body-shop adjustment may be required for proper alignment and consistent panel gaps. Professional body-shop and automotive electrical installation are recommended. Painted, installed, wired, drilled, cut, damaged, or permanently modified components may not qualify for return under the VELNOX Auto Return Policy.

Folded Packaging Notice

The flexible rear bumper cover may be folded and securely wrapped for transportation to help reduce oversized shipping charges. Temporary bends, waves, or packaging impressions may be visible after unpacking. Place the bumper cover in a warm, clean area and allow it to recover its original shape before test-fitting and painting. Controlled warmth may be used when necessary. Do not apply excessive direct heat, as overheating may permanently deform or damage the plastic. Lighting assemblies and other delicate components are separately protected when included with the selected package.

FAQS

1. Are tail lights included with the Base Sedan Style?

No. Outer and inner tail-light assemblies are included only with the 10-Piece Master Bundle.

2. Is the rear bumper cover already painted?

No. The bumper cover is supplied in a primed finish and requires surface preparation, color matching, and painting before installation.

3. Does this kit fit Civic Coupe or Hatchback models?

No. Both package options are designed for compatible 2016–2018 Honda Civic Sedan pre-facelift models only.

Compatibility Disclaimer

This product is an aftermarket replacement and restoration package and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, trim names, and body-style descriptions are provided solely for product identification and compatibility verification. Custom lighting installation requirements may vary depending on the vehicle’s original wiring and equipment configuration. Honda® and Civic® are registered trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Product Overview

Refresh the exterior appearance of your 2021–2022 Honda Accord with this OE-style aftermarket trim restoration package for compatible North American facelift models.

Two appearance options are available:

• Chrome Luxury Spec

• Dark-Chrome Night Sport Spec

Each option includes the matching front grille trim, front bumper trim, headlight eyebrow moldings, and rear lower-valance components for its intended appearance configuration. This listing includes exterior trim, garnish, molding, mesh, and support components only. Front and rear bumper covers, complete grilles, headlights, fog lights, and other major body parts are not included.

Choose Your Package

Chrome Luxury Spec

• Mirror-chrome headlight eyebrow trim

• Matching facelift front bumper side trim

Dark-Chrome Night Sport Spec

• Dark smoked black-chrome headlight eyebrow trim

• Matching Night Sport front bumper side trim

Shared Trim & Support Components

Included with Both Package Options

Chrome Luxury Spec Components

Dark-Chrome Night Sport Spec Components

Important Information

This listing includes only the components shown under the selected package option.

The following items are not included:

• Front bumper cover

• Rear bumper cover

• Complete front grille assembly

• Headlight assemblies

• Fog lights

• Emblems

• Sensors or wiring

• Mounting hardware

• Clips and retainers

• Any component not specifically listed

Compatible original clips, brackets, fasteners, retainers, adhesive materials, or mounting hardware may need to be transferred from the vehicle or purchased separately. Finish varies by component and selected package, including chrome, dark chrome, gloss black, and textured black.

Fitment & Installation

Designed for compatible North American 2021–2022 Honda Accord facelift models using the matching Sport, Touring, or Hybrid exterior trim configuration. Do not select a package by trim name alone. Compare the original front bumper side strips, headlight eyebrow moldings, rear lower-valance trim, mounting points, finish, and listed reference numbers before ordering. Test-fit all components before permanent installation. Original clips, brackets, retainers, adhesive materials, or fasteners may need to be reused or replaced. Professional installation is recommended for proper alignment and secure attachment. Products that have been installed, damaged, modified, or permanently attached may not qualify for return under the VELNOX Auto Return Policy.

FAQS

1. Does this package include the bumper covers, complete grille, or headlights?

No. This listing includes selected exterior trim and garnish components only. The front and rear bumper covers, complete grille assembly, and headlight assemblies are not included.

2. Are mounting clips and hardware included?

No. Compatible original clips, retainers, brackets, adhesive materials, or fasteners may need to be transferred from the vehicle or purchased separately.

3. How should compatibility be confirmed?

Compare the original trim shape, finish, mounting configuration, OEM reference numbers, and North American interchange numbers with the selected package before ordering.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Product Overview

This Front Bumper Restoration Kit is designed for compatible North American 2021–2022 Honda Accord facelift models. It combines the main exterior bumper components needed to replace a damaged or incomplete front-end setup while maintaining the updated mid-cycle body lines and factory-style appearance.

Two package options are available:

• LX/EX-L Style

• Sport/Touring Spec

Each option includes the shared bumper cover, grille component, lower center mesh grille, spoiler lip, and engine splash shield listed below, together with the matching side-trim configuration for the selected package. This kit is designed for the 2021–2022 facelift bumper layout and does not fit 2018–2020 pre-facelift models.

Shared Components Included with Both Package Options

LX/EX-L Style-Specific Components

Designed for compatible Accord models using the matching LX/EX-L-style side mesh bumper trim configuration.

Sport/Touring Spec-Specific Components

Designed for compatible Accord models using the matching ACC-opening grille and chrome-accented fog-light cover configuration.

Sport/Touring Configuration Note

The grille configuration is designed around the applicable ACC radar opening. The radar sensor, radar bracket, control module, wiring, and calibration service are not included. The side pieces included with this package are fog-light covers only. Fog-light lamps, bulbs, switches, wiring harnesses, and related electrical components are not included.

Important Information

This listing includes only the components shown under the selected package option. The following items are not included:

• Fog-light lamps or wiring

• ACC radar sensor or bracket

• Honda emblem

• Parking sensors

• Reinforcement bar

• Impact absorber

• Mounting brackets

• Clips, retainers, and hardware

• Any component not specifically listed

Compatible original components may need to be transferred from the existing bumper assembly or purchased separately. The bumper cover is supplied in a primed finish. Primer color may vary, and professional surface preparation and painting are required before installation.

Fitment & Installation

Designed for compatible North American 2021–2022 Honda Accord facelift models when the selected package, original bumper configuration, OEM reference numbers, and North American interchange numbers match the vehicle. Do not select a package by trim name alone. Compare the original grille design, side bumper trim, radar configuration, mounting points, and listed reference numbers before ordering. Test-fit all components before painting or permanent installation. Original clips, retainers, brackets, or hardware may need to be reused or replaced.

Professional preparation, paint matching, and installation are recommended for proper alignment and secure attachment. Products that have been painted, installed, drilled, cut, damaged, or permanently modified may not qualify for return under the VELNOX Auto Return Policy.

FAQS

1. Is the front bumper cover already painted?

No. It is supplied in a primed finish and must be prepared and painted to match the vehicle before installation.

2. Will this kit fit a 2018–2020 Honda Accord?

No. This kit is designed only for the 2021–2022 facelift bumper configuration.

3. How should compatibility be confirmed?

Compare the original bumper layout, grille design, side-trim style, mounting points, OEM reference numbers, and North American interchange numbers with the selected package before ordering.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Product Overview

Restore the exterior trim appearance of your 2018–2020 Honda Accord with this OE-style aftermarket replacement package for compatible North American models.

Two package options are available:

• Gasoline LX/EX Style

• Sport/Touring Spec

Each option combines the matching front grille trim, front bumper trim, support components, and rear exterior moldings for its intended configuration. This listing includes trim, garnish, molding, and support components only. Front and rear bumper covers, complete grille assemblies, headlights, and other major body panels are not included.

Choose Your Package

Gasoline LX/EX Style Includes:

• Front grille upper chrome wing garnish

• Front bumper upper retainer/deflector panel

• Front grille lower support bracket

• Front bumper side lower protective strips

• Rear bumper center lower protection strip

Sport/Touring Spec Includes:

• Front grille upper chrome wing garnish

• Front bumper upper retainer/deflector panel

• Front grille lower support bracket

• Front bumper side lower protective strips

• Front headlight eyebrow garnish moldings

• Rear bumper chrome trim strips

Shared Front-End Trim & Support Components - Included with Both Package Options

Gasoline LX/EX Style-Specific Component

Designed for compatible Accord models using the matching LX/EX-style rear bumper center trim configuration.

Sport/Touring Spec-Specific Components

Designed for compatible Accord models using the matching headlight eyebrow and rear chrome trim configuration.

Important Information

This listing includes only the components shown under the selected package option.

The following items are not included:

• Front bumper cover

• Rear bumper cover

• Complete front grille

• Headlight assemblies

• Fog lights

• Emblems

• Sensors or wiring

• Mounting hardware

• Clips and retainers

• Any component not specifically listed

Compatible original clips, brackets, retainers, fasteners, or mounting hardware may need to be transferred from the vehicle or purchased separately.

Fitment & Installation

Designed for compatible North American 2018–2020 Honda Accord models when the selected package, original trim configuration, OEM reference numbers, and North American interchange numbers match the vehicle. Do not select a package by trim name alone. Compare the original trim design, finish, mounting points, and listed reference numbers before ordering. Test-fit all components before permanent installation. Original clips, retainers, adhesive materials, brackets, or hardware may need to be transferred or replaced. Professional installation is recommended for proper alignment and secure attachment. Products that have been installed, damaged, modified, or permanently attached may not qualify for return under the VELNOX Auto Return Policy.

FAQS

1. Does this listing include the front or rear bumper cover?

No. This package includes selected exterior trim, garnish, molding, and support components only. The main bumper cover panels are not included.

2. Are the complete front grille and headlights included?

No. The package includes specific grille trim, support parts, and - on the Sport/Touring option - headlight eyebrow moldings. The complete grille and headlight assemblies are not included.

3. Are installation clips and hardware included?

No. Compatible original clips, retainers, fasteners, brackets, or mounting hardware may need to be transferred from the vehicle or purchased separately.

4. How should compatibility be confirmed?

Compare the original trim shape, finish, mounting configuration, OEM reference numbers, and North American interchange numbers with the selected package before ordering.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Product Overview

This Rear Bumper Restoration Kit is designed for compatible 2018–2020 Honda Accord models sold in North America. It combines the major exterior, mounting, and structural components needed to replace a damaged or incomplete rear bumper setup while helping restore the vehicle’s original rear-end appearance and alignment.

Two package configurations are available:

• Gasoline LX/EX Style — Single Hidden Exhaust Configuration

• Sport/Touring Spec — Dual Exposed Exhaust Configuration

Both options include a primed rear bumper cover, steel reinforcement bar, side retainer brackets, license-plate garnish, and rear reflector lamps. The Sport/Touring package also includes the textured lower diffuser and dual chrome exhaust-outlet trim used with the exposed dual-exhaust design. The bumper cover is supplied in a primed finish and requires preparation and painting before installation.

Compare Package Options

Shared Components

Included with Both Package Options

Gasoline LX/EX Style Components

Designed for compatible Accord models using the original single hidden-exhaust rear bumper configuration.

Sport/Touring Spec Components

Designed for compatible Accord models using the original dual exposed-exhaust rear bumper configuration.

Important Information

This listing includes only the components shown under the selected package option. The impact absorber, parking sensors, exhaust pipes, mufflers, wiring, emblems, mounting hardware, clips, retainers, and any components not specifically listed are not included. The chrome exhaust pieces included with the Sport/Touring package are decorative rear bumper outlet trim covers. They are not replacement exhaust pipes, mufflers, or functional tailpipes. Compatible original hardware and vehicle-specific components may need to be transferred from the existing bumper assembly or purchased separately.

Fitment & Installation

Designed for compatible North American 2018–2020 Honda Accord models when the selected package, original rear bumper configuration, OEM reference numbers, and North American interchange numbers match the vehicle. The Gasoline LX/EX Style option is intended for the single hidden-exhaust layout with the textured-black license-plate garnish.

The Sport/Touring Spec option is intended for the dual exposed-exhaust layout with the lower diffuser, premium tailgate garnish, and chrome exhaust-outlet trim shown above. Before ordering, verify:

• Rear bumper and exhaust configuration

• Lower valance or diffuser design

• License-plate garnish style

• Reflector openings

• Parking-sensor provisions

• OEM and North American interchange numbers

The rear bumper cover is supplied in a primed finish and may require sanding, cleaning, sealing, paint preparation, and professional color matching before installation. Test-fit all components before painting or making permanent modifications. Confirm mounting points, panel gaps, diffuser alignment, reflector placement, garnish fitment, and exhaust-trim positioning.

Professional installation is recommended, especially when transferring the reinforcement bar or aligning the Sport/Touring diffuser and exhaust-outlet trim. Products that have been painted, installed, drilled, cut, damaged, or permanently modified may not qualify for return under the VELNOX Auto Return Policy.

FAQS

1. Is the rear bumper cover already painted?

No. The rear bumper cover is supplied in a primed finish and must be prepared and painted to match the vehicle before installation.

2. Does the Gasoline LX/EX package include the lower diffuser or chrome exhaust trim?

No. Those components are included only with the Sport/Touring Spec package.

3. Are the chrome exhaust pieces functional exhaust tips?

No. They are decorative bumper outlet trim covers. Exhaust pipes, mufflers, and other functional exhaust components are not included.

4. Are parking sensors included?

No. Parking sensors, wiring, and related electronic components are not included. Verify the bumper’s sensor configuration before ordering.

5. How should compatibility be confirmed?

Compare the vehicle’s original bumper design, exhaust layout, diffuser, license-plate garnish, reflector openings, and sensor provisions with the selected package. Confirm all listed OEM and North American interchange numbers before purchase.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Product Overview

Restore the exterior trim appearance of your 2020–2022 Honda CR-V with this OE-style aftermarket replacement package for compatible North American models.

Two package options are available:

• Gasoline LX/EX Style

• Touring Luxury Spec

Each package includes the matching front bumper accent trim, rear bumper accent trim, and headlight eyelid moldings for its intended exterior configuration. The Touring Luxury Spec also includes a rear tailgate chrome garnish. This listing is for exterior trim and garnish components only. The front and rear bumper cover panels are not included.

Choose Your Package

Gasoline LX/EX Style Includes:

• Front center accent strip

• Front corner trim pair

• Rear center accent strip

• Rear side trim pair

• Headlight eyelid molding pair with support brackets

Touring Luxury Spec Includes:

• Premium front center chrome accent strip

• Touring front corner trim pair

• Premium rear center accent strip

• Premium rear side molding pair

• Rear tailgate center chrome garnish

• Headlight eyelid molding pair with support brackets

Gasoline LX/EX Style Components

Designed for compatible 2020–2022 Honda CR-V gasoline LX/EX configurations using the matching standard exterior trim design.

Front Bumper Trim

Rear Bumper Trim

Headlight Trim

Touring Luxury Spec Components

Designed for compatible Touring, Sport, and Hybrid configurations that use the same premium exterior trim design and matching reference numbers.

Front Bumper Trim

Rear Bumper and Tailgate Trim

Headlight Trim

Important Information

This listing includes only the exterior trim and garnish components listed under the selected package option. Front and rear bumper covers, grilles, headlights, fog lights, emblems, sensors, wiring, mounting hardware, clips, retainers, and any components not specifically listed are not included. Compatible original clips, brackets, retainers, or mounting hardware may need to be transferred from the vehicle or purchased separately. Finish and appearance vary by component and package. The Gasoline LX/EX option uses standard silver-tone accents, while the Touring Luxury Spec uses premium chrome and darker high-spec rear accents.

Fitment & Installation

Fitment is guaranteed when the selected package, original exterior trim design, OEM reference numbers, and North American interchange numbers match the vehicle.

Do not select a package by trim name alone. Before ordering, compare the vehicle’s original:

• Front center accent strip

• Front corner trim design

• Rear center accent strip

• Rear side moldings

• Tailgate garnish configuration

• Headlight eyelid molding shape

• OEM and North American interchange numbers

The Touring Luxury Spec is intended only for Touring, Sport, or Hybrid configurations using the same premium trim layout shown in the component tables. Test-fit all components before permanent installation. Professional installation is recommended to ensure proper alignment and secure attachment. Products that have been installed, damaged, modified, or permanently attached may not qualify for return under the VELNOX Auto Return Policy.

FAQS

1. Does the Gasoline LX/EX package include the tailgate garnish?

No. The rear tailgate chrome garnish is included only with the Touring Luxury Spec package.

2. Are mounting clips and installation hardware included?

No. Original clips, retainers, brackets, or mounting hardware may need to be transferred from the vehicle or purchased separately.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda® and CR-V® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Product Overview

This Front Bumper Restoration Kit is designed for compatible 2018-2020 Honda Accord models sold in North America. It combines the major exterior bumper components needed to replace a damaged or incomplete front-end setup while helping restore the vehicle’s original body lines and factory-style appearance.

Two package options are available:

• LX Base Style — Non-Radar

• Sport/Touring-Style — ACC Grille with LED Fog Lights

Both options include the shared bumper components listed below. The grille, side-trim, and fog-light configuration vary according to the selected package.

Compare Package Options

Shared Components

Included with Both Package Options

LX Base Style-Specific Components

Designed for compatible Accord models equipped with the original LX-style non-radar front bumper configuration.

LX Package Note

For the LX Base Style package, the lower center mesh grille, reference 71122-TVA-A10 / HO1200233, is normally supplied pre-assembled inside the main grille package associated with 71111-TVE-H01. It may not be packed as a separate loose component.

Sport/Touring-Style Specific Components

Designed for compatible Accord models equipped with the original ACC-opening grille and slim LED fog-light configuration.

Sport/Touring Package Notes

The grille includes an opening for the applicable ACC radar configuration. The radar sensor, radar bracket, control module, calibration service, and related driver-assistance components are not included. The included wiring harness is designed to support the supplied LED fog lights. Connector compatibility, wire routing, switch placement, and installation requirements may vary depending on the vehicle’s original electrical configuration.

Important Information

This listing includes only the components shown under the selected package option. The bumper reinforcement bar, impact absorber, ACC radar sensor and bracket, Honda emblem, mounting hardware, clips, retainers, screws, and any parts not specifically listed are not included. Compatible original hardware and factory components may need to be transferred from the existing bumper assembly or purchased separately.

Fitment & Installation

Fitment is guaranteed when the selected package, original bumper configuration, OEM reference numbers, and North American interchange numbers match the vehicle. The LX Base Style option is intended for the non-radar LX-style setup. The Sport/Touring-Style option is intended for vehicles using the ACC-opening grille and slim LED fog-light setup.

Before ordering, verify the vehicle year, trim level, grille design, radar configuration, fog-light setup, and original bumper layout. The front bumper cover is supplied in a primed finish and may require sanding, cleaning, sealing, paint preparation, and professional color matching before installation. Test-fit all components before painting, wiring, or making permanent modifications. Confirm mounting points, grille alignment, trim placement, fog-light positioning, splash-shield alignment, and panel gaps.

Vehicles equipped with ACC radar or other driver-assistance systems may require transfer of the original equipment and professional recalibration after installation. Products that have been painted, installed, drilled, cut, wired, damaged, or permanently modified may not qualify for return under the VELNOX Auto Return Policy.

FAQS

1. Does the LX package include LED fog lights?

No. The LX package includes side mesh bumper trim covers and does not include fog lights, fog-light covers, or fog-light wiring.

2. Is the ACC radar sensor included with the Sport/Touring package?

No. The grille includes the applicable ACC opening, but the radar sensor, mounting bracket, control equipment, and calibration service are not included.

3. Is the front bumper cover already painted?

No. The front bumper cover is supplied in a primed finish and must be prepared and painted to match the vehicle before final installation.

4. How should compatibility be verified before ordering?

Verify the vehicle year, trim, grille style, radar configuration, fog-light setup, and original bumper layout. Then compare the listed OEM reference numbers and North American interchange numbers with the original components.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda®, Accord®, LX®, Sport®, Touring®, and related names are registered trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.