Car Replacement Parts: Fasteners & Clips

	__ __
Description	Description - __
Vendor	Vendor - __
	View full details

2017–2022 Honda CR-V Rear Bumper Retainer Brackets

$34.97 $69.97

-50%

Product Overview

Restore proper rear bumper alignment with this complete left and right side retainer bracket set for the 2017–2022 Honda CR-V. These brackets install behind the outer corners of the rear bumper cover and help secure the bumper cover to the vehicle body. They are designed to replace cracked, broken, worn, or missing retainers that may cause loose bumper corners, sagging edges, uneven panel gaps, or poor alignment. Each bracket features vehicle-specific contours, molded retaining tabs, and factory-style mounting points for direct replacement.

Package Includes

1x Complete Rear Bumper Side Retainer Bracket Pair:

1x Left Driver-Side Rear Bumper Bracket
1x Right Passenger-Side Rear Bumper Bracket

Both left and right brackets are included together in one package. This listing includes the two rear bumper side retainer brackets only. The rear bumper cover, screws, push clips, and additional mounting hardware are not included unless specifically shown in the product images.

Reference Part Numbers

North American Interchange Numbers

HO1142115 — Left Driver Side
HO1143115 — Right Passenger Side

OEM Cross-Reference Numbers

71598-TLA-A01 — Left Driver Side
71593-TLA-A01 — Right Passenger Side

Reference numbers are provided solely for product identification and compatibility comparison purposes.

Installation Notes

Installs at the factory mounting locations behind the left and right outer corners of the rear bumper cover. The left and right brackets are side-specific and are not interchangeable. Existing screws and push clips may be reused only if they remain undamaged and in serviceable condition. Replace any worn, broken, or missing mounting hardware before installation. Professional installation is recommended to ensure proper bumper positioning, panel alignment, and secure attachment.

Important Fitment Notice

Designed for North American-specification:

2017–2022 Honda CR-V gasoline models
2020–2022 Honda CR-V Hybrid models

Compatible with applicable 2WD and AWD 5-door SUV configurations. Before ordering, compare the listed reference numbers, bracket shape, mounting points, side orientation, and product photos with the original parts on your vehicle. Additional verification is recommended for vehicles with previous collision repairs, aftermarket bumper covers, modified body components, body conversions, or missing original parts.

Compatibility Disclaimer

This is an aftermarket replacement product and is not an original equipment manufacturer part. Honda® and CR-V® are registered trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, or endorsed by Honda Motor Co., Ltd. Vehicle names, model years, trim names, OEM reference numbers, and interchange numbers are used solely for product identification and compatibility reference purposes.

Low in stock

2017–2022 Honda CR-V Front Bumper Retainer Brackets

$34.97 $69.97

-50%

Product Overview

Restore proper front bumper positioning with this complete left and right side retainer bracket set for the 2017–2022 Honda CR-V. These brackets install behind the outer corners of the front bumper cover and help secure the bumper cover to the vehicle body. They are designed to replace cracked, broken, worn, or missing side retainers that may cause loose bumper corners, sagging edges, uneven panel gaps, or poor alignment. Each bracket features vehicle-specific mounting points and molded retaining tabs for direct replacement at the original factory locations.

Package Includes

1x Complete Front Bumper Side Retainer Bracket Pair:

1x Left Driver-Side Front Bumper Bracket
1x Right Passenger-Side Front Bumper Bracket

Both left and right brackets are included together in one package.

This listing includes the two front bumper side retainer brackets only. The front bumper cover, screws, push clips, and additional mounting hardware are not included unless specifically shown in the product images.

Reference Part Numbers

North American Interchange Numbers

HO1042136 — Left Driver Side
HO1043136 — Right Passenger Side

Current OEM Cross-Reference Numbers

71198-TME-T01 — Left Driver Side
71193-TME-T01 — Right Passenger Side

Previous / Superseded OEM Reference Numbers

71198-TLA-A01 — Left Driver Side
71193-TLA-A01 — Right Passenger Side

Reference numbers are provided solely for product identification and compatibility comparison purposes.

Installation Notes

Installs at the factory mounting locations behind the left and right outer corners of the front bumper cover. The brackets are side-specific and are not interchangeable. Existing screws and push clips may be reused only if they remain undamaged and in serviceable condition. Replace any worn, broken, or missing mounting hardware before installation. Professional installation is recommended to ensure proper bumper positioning, panel alignment, and secure attachment.

Important Fitment Notice

Designed for North American-specification 2017–2022 Honda CR-V 5-door SUV models, including applicable gasoline and 2020–2022 Hybrid configurations. Before ordering, compare the listed reference numbers, bracket shape, mounting points, side orientation, and product photos with the original parts on your vehicle. Additional verification is recommended for vehicles with previous collision repairs, aftermarket bumper covers, modified body components, body conversions, or missing original parts.

Compatibility Disclaimer

This is an aftermarket replacement product and is not an original equipment manufacturer part. Honda® and CR-V® are registered trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, or endorsed by Honda Motor Co., Ltd. Vehicle names, model years, trim names, OEM reference numbers, and interchange numbers are used solely for product identification and compatibility reference purposes.

Low in stock

2016–2021 Honda Civic Front Bumper Retainer Brackets

$34.97 $69.97

-50%

Product Overview

Restore proper front bumper positioning with this complete left and right side retainer bracket set for the 2016–2021 Honda Civic Sedan and Coupe. These brackets install behind the outer corners of the front bumper cover and help secure the bumper cover to the vehicle body. They are designed to replace cracked, broken, worn, or missing side retainers that may cause loose bumper corners, sagging edges, uneven panel gaps, or poor alignment. Manufactured from durable automotive-grade PP plastic, each bracket features vehicle-specific mounting points and molded retaining tabs for direct replacement at the factory locations.

Package Includes

1x Complete Front Bumper Side Retainer Bracket Pair:

1x Left Driver-Side Front Bumper Bracket
1x Right Passenger-Side Front Bumper Bracket

Both left and right brackets are included together in one package. This listing includes the two front bumper side retainer brackets only. The front bumper cover, screws, push clips, and additional mounting hardware are not included unless specifically shown in the product images.

Reference Part Numbers

North American Interchange Numbers

HO1032109 — Left Driver Side
HO1033109 — Right Passenger Side

OEM Cross-Reference Numbers

71198-TBA-A00 — Left Driver Side
71193-TBA-A00 — Right Passenger Side

Reference numbers are provided solely for product identification and compatibility comparison purposes.

Installation Notes

Installs at the factory mounting locations behind the left and right outer corners of the front bumper cover. The brackets are side-specific and are not interchangeable. Existing screws and push clips may be reused only if they remain undamaged and in serviceable condition. Replace any worn, broken, or missing mounting hardware before installation. Professional installation is recommended to ensure proper bumper positioning, panel alignment, and secure attachment.

Important Fitment Notice

Designed for applicable North American-specification 2016–2021 Honda Civic Sedan and Coupe models. Does not fit Honda Civic Hatchback models. Before ordering, compare the listed reference numbers, bracket shape, mounting points, side orientation, and product photos with the original parts on your vehicle. Additional verification is recommended for vehicles with previous collision repairs, aftermarket bumper covers, body-style conversions, modified body components, or missing original parts.

Compatibility Disclaimer

This is an aftermarket replacement product and is not an original equipment manufacturer part. Honda® and Civic® are registered trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, or endorsed by Honda Motor Co., Ltd. Vehicle names, model years, body styles, trim names, OEM reference numbers, and interchange numbers are used solely for product identification and compatibility reference purposes.

Low in stock

2018–2022 Honda Accord Rear Bumper Side Retainer Brackets Pair

2018–2022 Honda Accord Rear Bumper Side Retainer Brackets Pair

$34.97 $69.97

-50%

Product Overview

Restore proper rear bumper positioning with this complete left and right side retainer bracket set for the 2018–2022 Honda Accord. These brackets install behind the outer corners of the rear bumper cover and help secure it to the vehicle body. They are designed to replace cracked, broken, worn, or missing retainers that may cause loose bumper corners, sagging edges, uneven panel gaps, or poor alignment.

Package Includes

1x Complete Rear Bumper Side Retainer Bracket Pair:

1x Left Driver-Side Rear Bumper Bracket
1x Right Passenger-Side Rear Bumper Bracket

Both left and right brackets are included together in one package.

This listing includes the two rear bumper side retainer brackets only. The rear bumper cover, screws, push clips, and additional mounting hardware are not included unless specifically shown in the product images.

Reference Part Numbers

North American Interchange Numbers

HO1142114 — Left Driver Side
HO1143114 — Right Passenger Side

OEM Cross-Reference Numbers

71598-TVA-A01 — Left Driver Side
71593-TVA-A01 — Right Passenger Side

Reference numbers are provided solely for product identification and compatibility comparison purposes.

Installation Notes

Installs at the factory mounting locations behind the left and right outer corners of the rear bumper cover. The brackets are side-specific and are not interchangeable. Existing screws and push clips may be reused only if they remain undamaged and in serviceable condition. Replace any worn, broken, or missing mounting hardware before installation. Professional installation is recommended to ensure proper bumper positioning, panel alignment, and secure attachment.

Important Fitment Notice

Designed for North American-specification 2018–2022 Honda Accord Sedan and Accord Hybrid models. Before ordering, compare the listed reference numbers, bracket shape, mounting points, side orientation, and product photos with the original parts on your vehicle. Additional verification is recommended for vehicles with previous collision repairs, aftermarket bumper covers, modified body components, or missing original parts.

Compatibility Disclaimer

This is an aftermarket replacement product and is not an original equipment manufacturer part. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, or endorsed by Honda Motor Co., Ltd. Vehicle names, model years, trim names, OEM reference numbers, and interchange numbers are used solely for product identification and compatibility reference purposes.

Low in stock

2019–2021 Honda Civic Gloss Black Lower Valance Garnish

$49.97 $99.97

-50%

Upgrade or replace the lower front bumper accent on your 2019–2021 Honda Civic Sedan or Coupe with this high-gloss piano-black lower lip trim. Designed to follow the original bumper contours, it restores a clean Sport-inspired appearance without replacing the complete bumper assembly.

Package Includes

Qty.	Included Component	Finish / Configuration	OEM Reference No.	North American Interchange No.
1	Front Bumper Lower Lip Valance Garnish	High-gloss piano-black Sport-style finish	71112-TBA-A60 V	HO1012115 V

Material and Installation

Manufactured from impact-resistant automotive-grade ABS plastic with a finished glossy piano-black surface. Designed as an OE-style replacement using matching factory attachment locations. Compare the shape, dimensions, mounting tabs and attachment points with the original part before ordering. Test-fit before permanent installation. Professional installation is recommended.

Before Ordering

Designed for matching North American-specification 2019–2021 Honda Civic Sedan and Coupe front bumper configurations. Fitment may vary by trim level and original bumper design. Compare the product photos and original component before purchase.

Does not fit Civic Hatchback or Type R models.

Items Not Included

This listing includes the lower lip garnish only. The front bumper cover, lower grille, side trim, fog lights, sensors, clips and mounting hardware are not included unless specifically shown and stated.

Compatibility Disclaimer

This product is an aftermarket replacement and appearance-upgrade component and is not manufactured or supplied by Honda Motor Co., Ltd. OEM reference numbers, North American interchange numbers, vehicle names, trim names and body-style descriptions are provided solely for identification and compatibility verification. Their use does not indicate that this product is a genuine Honda OEM part. Honda®, Civic® and related trademarks are the property of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, endorsed by or authorized by Honda Motor Co., Ltd.

Low in stock

2019–2021 Honda Civic Sedan Rear Bumper Kit

From $499.97 $749.97

-33%

Product Description

Choose the bundle that matches the vehicle’s original rear bumper, trunk garnish and tail-light configuration.

Option 1: Factory Chrome Edition

Rear bumper restoration package without tail-light assemblies.

No.	Included Component	Finish / Configuration	OEM Reference No.	North American Interchange No.
1	Rear Bumper Cover Bare Shell Panel	Primed matte-black finish; painting required	04715-TBA-A60ZZ / 04715-TBA-A00ZZ V	HO1100318 / HO1100311 V
2	Trunk Lid License Plate Garnish Panel	Glossy piano-black Sport-style finish	74890-TBA-A11 V	HO1068112 / HO1068112-Black V
3	Rear Bumper Impact Reinforcement Beam	Heavy-duty steel construction	71530-TBA-A00 V	HO1106222 V
4	Rear Bumper Lower Valance Panel	Textured matte-black finish; facelift configuration	71502-TBA-A60 V	HO1112105 V
5	Rear Bumper Side Retainer Bracket Pair	Left and right mounting supports	71598-TBA-A01 / 71593-TBA-A01 V	HO1147100 / HO1146100 V
6	Rear Bumper Reflector Pair	Factory-style red reflectors; left and right pair	33555-TD4-A01 / 33505-TD4-A01 V	HO1182103 / HO1183103 V

Tail-light assemblies are not included with this bundle.

Option 2: Premium Blackout Upgrade

Complete blackout-style package with outer and trunk-mounted LED tail-light assemblies.

No.	Included Component	Finish / Configuration	OEM Reference No.	North American Interchange No.
1	Rear Bumper Cover Bare Shell Panel	Primed matte-black finish; painting required	04715-TBA-A60ZZ / 04715-TBA-A00ZZ V	HO1100318 / HO1100311 V
2	Trunk Lid License Plate Garnish Panel	Glossy piano-black Sport-style finish	74890-TBA-A11 V	HO1068112 / HO1068112-Black V
3	Rear Bumper Impact Reinforcement Beam	Heavy-duty steel construction	71530-TBA-A00 V	HO1106222 V
4	Rear Bumper Lower Valance Panel	Textured matte-black finish; facelift configuration	71502-TBA-A60 V	HO1112105 V
5	Rear Bumper Side Retainer Bracket Pair	Left and right mounting supports	71598-TBA-A01 / 71593-TBA-A01 V	HO1147100 / HO1146100 V
6	Rear Bumper Reflector Pair	Factory-style red reflectors; left and right pair	33555-TD4-A01 / 33505-TD4-A01 V	HO1182103 / HO1183103 V
7	Smoked Outer LED Tail-Light Assembly Pair	Dark smoked lenses; C-shaped LED design; sequential amber turn signals	33550-TBA-A01 / 33500-TBA-A01 V	HO2882102 / HO2883102 V
8	Inner Trunk-Mounted LED Tail-Light Pair	Full LED configuration; left and right pair	34155-TBA-A01 / 34150-TBA-A01 V	HO2882103 / HO2883103 V

Before Ordering - Compare the selected bundle with the vehicle’s original bumper shape, lower valance, trunk garnish, mounting points and lighting connectors. The LED tail lights included with the Premium Blackout Upgrade may require wiring adapters, resistors or installation adjustments depending on the vehicle’s original equipment. Verify connector and wiring compatibility before installation.

Finish and Installation

The bumper cover is supplied in a primed finish and requires preparation and painting. Glossy-black and textured-black components are supplied in their listed finishes. Test-fit all bumper and lighting components before painting or permanent installation. Professional body-shop and automotive electrical installation are recommended.

Items Not Included

Unless specifically listed under the selected bundle, parking sensors, exhaust trim, wiring adapters, load resistors, control modules, emblems, mounting hardware and paint materials are not included.

Compatibility Disclaimer

This product is an aftermarket replacement and restoration package and is not manufactured or supplied by Honda Motor Co., Ltd. OEM reference numbers, North American interchange numbers, vehicle names, trim names and body-style descriptions are provided solely for product identification and compatibility verification. Their use does not indicate that these products are genuine Honda OEM parts. Lighting installation requirements may vary depending on the vehicle’s original wiring, connectors and equipment configuration. Honda®, Civic® and related trademarks are the property of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, endorsed by or authorized by Honda Motor Co., Ltd.

Low in stock

2019-2021 Honda Civic Front Bumper Kit

From $549.97 $799.97

-31%

Product Description

Choose the bundle that matches your vehicle’s original grille, bumper trim, sensor and headlight configuration.

Option 1: 10-Piece Structural Shield Bundle

Includes the primary bumper, reinforcement, lower grille, underbody shield, mounting supports and low-spec bumper trim components.

No.	Included Component	Finish / Configuration	OEM Reference No.	North American Interchange No.
1	Front Bumper Cover Bare Shell Panel	Primed finish; painting required; facelift specification	04711-TBA-A60ZZ V	HO1000314 V
2	Front Bumper Impact Reinforcement Beam	Heavy-duty steel construction	71130-TBA-A00 / 71130-TBA-A20 / 71130-TBA-A50 V	HO1106121 V
3	Front Bumper Center Lower Honeycomb Mesh Grille	Textured black; low-spec configuration	71112-TBA-A11 V	HO1200259 V
4	Front Bumper Lower Spoiler Lip / Chin Protector	Textured matte-black finish	71112-TBA-A60 V	HO1012115 V
5	Front Lower Engine Splash Shield Panel	Molded black plastic	74111-TBA-A00 V	HO1228135 V
6	Front Bumper Side Retainer Bracket Pair	Left and right mounting supports	71198-TBA-A01 / 71193-TBA-A01 V	HO1142104 / HO1143104 V
7	Front License Plate Mounting Bracket	North American-style molded plastic bracket	71145-TBA-A00 V	HO1068112 V
8	Front Bumper Round-Opening Side Bezel Pair	Textured black; left and right low-spec trim pieces	71103-TBA-A60 / 71108-TBA-A60 V	HO1038150 / HO1039150 V
9	Front Bumper Lower Outer Mesh Grille Panel	Textured black; facelift configuration	71102-TBA-A50 / 71102-TBC-A50 V	HO1200272 V
10	Front Bumper Right-Side Radar Sensor Cover	Passenger-side single component only	71109-TBA-A00 V	HO1039152 V

Option 2: 11-Piece Headlights Restoration Master Bundle

Adds a high-gloss piano-black upper grille and a left and right halogen headlight pair for a more complete front-end restoration.

No.	Included Component	Finish / Configuration	OEM Reference No.	North American Interchange No.
1	Front Bumper Cover Bare Shell Panel	Primed finish; painting required; facelift specification	04711-TBA-A60ZZ V	HO1000314 V
2	Front Bumper Impact Reinforcement Beam	Heavy-duty steel construction	71130-TBA-A00 V	HO1106121 V
3	Upper Front Grille Mask Assembly	High-gloss piano-black Sport-style finish	71121-TBA-A61 / 71121-TBA-A11 V	HO1200259-Black V
4	Front Bumper Lower Spoiler Lip / Chin Protector	Textured matte-black finish	71112-TBA-A60 V	HO1012115 V
5	Front Lower Engine Splash Shield Panel	Molded black plastic	74111-TBA-A00 V	HO1228135 V
6	Front Bumper Side Retainer Bracket Pair	Left and right mounting supports	71198-TBA-A01 / 71193-TBA-A01 V	HO1142104 / HO1143104 V
7	Front License Plate Mounting Bracket	North American-style molded plastic bracket	71145-TBA-A00 V	HO1068112 V
8	Front Bumper Sport-Style Side Trim Pair	Glossy piano black; left and right interlocking trim pieces	71108-TBA-A60 / 71103-TBA-A60 V	HO1038150 / HO1039150 / HO1046101 / HO1047101 V
9	Front Bumper Lower Outer Mesh Grille Panel	Textured black; facelift configuration	71102-TBA-A50 / 71102-TBC-A50 V	HO1200272 V
10	Front Bumper Right-Side Radar Sensor Cover	Passenger-side single component only	71109-TBA-A00 V	HO1039152 V
11	Halogen Headlight Assembly Pair	Clear-lens halogen configuration; left and right complete pair	33150-TBA-A01 / 33100-TBA-A01 V	HO2502163 / HO2503163 V

Before Ordering - Compare the selected bundle with the vehicle’s original grille design, bumper openings, side trim, sensor equipment, headlight type and mounting points. The halogen headlights included with the 11-piece bundle may not replace every factory halogen or LED configuration used on 2019–2021 Civic Sedan and Coupe models. Verify the original housings, connectors, mounting tabs and reference numbers before ordering. The included radar sensor cover does not include the radar sensor, control module or mounting hardware.

Finish and Installation

The bumper cover is supplied in a primed finish and requires preparation and painting before installation. Gloss-black and textured-black components are supplied in their listed finishes. Test-fit all components before painting or permanent installation. Professional body-shop painting and installation are recommended.

Items Not Included

Unless specifically listed under the selected bundle, fog lights, bulbs, wiring harnesses, radar sensors, parking sensors, driver-assistance modules, grille emblems, LED modules, mounting hardware and paint materials are not included.

Compatibility Disclaimer

This is an aftermarket replacement and restoration package and is not manufactured or supplied by Honda Motor Co., Ltd. OEM reference numbers, North American interchange numbers, vehicle names, trim names and body-style descriptions are provided solely for identification and compatibility reference. Their use does not indicate that these products are genuine Honda OEM parts. Sensor, radar and lighting installation requirements may vary depending on the vehicle’s original wiring and equipment configuration. Buyers should verify compatibility before installation. Honda®, Civic® and related trademarks are the property of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, endorsed by or authorized by Honda Motor Co., Ltd.

Low in stock

2016–2018 Honda Civic Front Bumper Restoration Kit

From $529.97 $699.97

-24%

Product Description

Choose between two front bumper restoration packages designed for different factory-style grille finishes and front-end configurations. Review the package contents, product photos and reference numbers before selecting an option.

Option 1: LX/EX Base Bundle — 10-Piece Package

Chrome-accent upper grille configuration. Headlight assemblies and upper grille side extension garnishes are not included.

No.	Included Component	Finish / Configuration	OEM Reference No.	Partslink No.
1	Front Bumper Cover Bare Shell Panel	Primed finish; painting required	04711-TBA-A00ZZ	HO1000306
2	Front Bumper Center Lower Radiator Honeycomb Mesh Grille	Textured black	—	—
3	Front Bumper Lower Spoiler Lip / Chin Splitter Panel	Textured matte black	—	HO1012112
4	Front Lower Engine Splash Shield Protector Panel	Molded black plastic	74111-TBA-A00	—
5	Upper Front Grille Mask Assembly with Chrome Wing Garnish	Chrome-accent base-style configuration	71121-TBA-A01	HO1200231
6	Upper Grille Chrome Molding Trim	Chrome finish	71122-TBA-A01	—
7	Front Bumper Impact Reinforcement Beam	Heavy-duty steel	71130-TBA-A00	—
8	Front Bumper Side Retainer Bracket Pair	Left and right mounting supports	71198-TBA-A01 / 71193-TBA-A01	HO1142104 / HO1143104
9	Front License Plate Mounting Bracket	North American specification; molded black plastic	71145-TBA-A00	—
10	Front Bumper Side Mesh Trim Cover Pair	Textured black; driver and passenger sides	71103-TBA-A00 / 71108-TBA-A00	HO1038114 / HO1039114

Option 2: Sport/Si/Touring Spec — 12-Piece Package

Glossy piano-black upper grille configuration. Includes left and right halogen headlight assemblies and upper grille side extension garnishes.

No.	Included Component	Finish / Configuration	OEM Reference No.	Partslink No.
1	Front Bumper Cover Bare Shell Panel	Primed finish; painting required	04711-TBA-A00ZZ	HO1000306
2	Front Bumper Center Lower Radiator Honeycomb Mesh Grille	Textured black	—	—
3	Front Bumper Lower Spoiler Lip / Chin Splitter Panel	Textured matte black	—	HO1012112
4	Front Lower Engine Splash Shield Protector Panel	Molded black plastic	74111-TBA-A00	—
5	Premium Upper Front Grille Mask Assembly	Glossy piano-black wing finish	71121-TBA-A11	—
6	Upper Grille Extension Molding Cover	Glossy piano-black sport finish	71122-TBA-A11	—
7	Front Bumper Impact Reinforcement Beam	Heavy-duty steel	71130-TBA-A00	—
8	Front Bumper Side Retainer Bracket Pair	Left and right mounting supports	71198-TBA-A01 / 71193-TBA-A01	HO1142104 / HO1143104
9	Front License Plate Mounting Bracket	North American specification; molded black plastic	71145-TBA-A00	—
10	Front Bumper Side Mesh Trim Cover Pair	Textured black; driver and passenger sides	71103-TBA-A00 / 71108-TBA-A00	HO1038114 / HO1039114
11	Halogen Headlight Assembly Pair	Clear-lens halogen configuration; left and right pair	33150-TBA-A01 / 33100-TBA-A01	—
12	Front Upper Grille Side Extension Garnish Pair	Left and right grille-side trim pieces	71129-TBA-A01 / 71124-TBA-A01	HO1212122 / HO1213122

Before Ordering - Select the package that matches the vehicle’s original grille finish, bumper openings, headlight type and mounting configuration. Compare the product photos and listed reference numbers with the original components before purchase. The halogen headlights included with the Sport/Si/Touring Spec package are not intended to replace factory LED headlights unless the housings, connectors and mounting points match.

Finish and Installation

The bumper cover is supplied in a primed finish and requires surface preparation and painting before installation. Chrome, glossy-black and textured-black components are supplied in their listed finishes. Test-fit all components before painting or permanent installation. Professional body-shop painting and installation are recommended.

Items Not Included

Unless specifically listed under the selected package, fog lights, wiring harnesses, parking sensors, radar components, driver-assistance equipment, grille emblems, LED modules, general mounting hardware and paint materials are not included.

Compatibility Disclaimer

This product is an aftermarket replacement and restoration package and is not manufactured or supplied by Honda Motor Co., Ltd. OEM reference numbers, North American interchange numbers, vehicle names, trim names and body-style descriptions are provided solely for product identification and compatibility verification. Their use does not indicate that this product is a genuine Honda OEM part. Lighting installation requirements may vary depending on the vehicle’s original wiring, connectors and equipment configuration. Buyers should verify compatibility before installation. Honda®, Civic® and related trademarks are the property of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, endorsed by or authorized by Honda Motor Co., Ltd.

Low in stock

2016-2018 Honda Civic Sedan Rear Bumper Kit

From $529.97 $699.97

-24%

Product Overview

Restore damaged, missing, or worn rear exterior components with this multi-piece Rear Bumper Restoration Kit, designed for compatible North American 2016–2018 Honda Civic Sedan pre-facelift models.

Two package options are available:

Package Option	Tail Lights	Trunk Garnish
Base Sedan Style	Not Included	Factory-Style Chrome
10-Piece Master Bundle	Outer and Inner LED Tail Lights Included	Glossy Piano Black

Select the package that matches your repair needs and review the complete contents below before ordering.

Option 1: Base Sedan Style - Tail Lights Not Included

No.	Included Component	Finish / Configuration	OEM Reference	North American Interchange
1	Rear Bumper Cover Bare Shell Main Panel	Primed finish	04715-TBA-A00ZZ	HO1100311
2	Rear Bumper Impact Reinforcement Beam	Heavy-duty high-strength steel	71530-TBA-A00	—
3	Rear Bumper Lower Valance Garnish Panel	Textured matte-black finish	71502-TBA-A00	HO1112100
4	Rear Bumper Side Retainer Brackets — LH & RH Pair	Driver- and passenger-side mounting supports	71598-TBA-A01 / 71593-TBA-A01	HO1147100 / HO1146100
5	Rear Bumper Side Mesh Vent Inserts — LH & RH Pair	Factory-style mesh design	71503-TBA-A00 / 71508-TBA-A00	HO1184102 / HO1185102
6	Rear Bumper Upper Vent Garnish Extensions — LH & RH Pair	Driver- and passenger-side trim extensions	71504-TBA-A00 / 71509-TBA-A00	HO1184103 / HO1185103
7	Rear Bumper Reflector Lamps — LH & RH Pair	Factory-style red reflector lenses	33555-TD4-A01 / 33505-TD4-A01	HO1182103 / HO1183103
8	Rear Trunk-Lid License-Plate Garnish Panel	Factory-style chrome-plated finish	74890-TBA-A01	HO1068112

Important: Outer rear tail lights, inner trunk-lid tail lights, tail-light wiring components, and the glossy piano-black trunk garnish are not included with the Base Sedan Style.

Option 2: 10-Piece Master Bundle - Outer and Inner LED Tail Lights Included

No.	Included Component	Finish / Configuration	OEM Reference	North American Interchange
1	Rear Bumper Cover Bare Shell Main Panel	Primed finish	04715-TBA-A00ZZ	HO1100311
2	Rear Bumper Impact Reinforcement Beam	Heavy-duty high-strength steel	71530-TBA-A00	—
3	Rear Bumper Lower Valance Garnish Panel	Textured matte-black finish	71502-TBA-A00	HO1112100
4	Rear Bumper Side Retainer Brackets — LH & RH Pair	Driver- and passenger-side mounting supports	71598-TBA-A01 / 71593-TBA-A01	HO1147100 / HO1146100
5	Rear Bumper Side Mesh Vent Inserts — LH & RH Pair	Factory-style mesh design	71503-TBA-A00 / 71508-TBA-A00	HO1184102 / HO1185102
6	Rear Bumper Upper Vent Garnish Extensions — LH & RH Pair	Driver- and passenger-side trim extensions	71504-TBA-A00 / 71509-TBA-A00	HO1184103 / HO1185103
7	Rear Bumper Reflector Lamps — LH & RH Pair	Factory-style red reflector lenses	33555-TD4-A01 / 33505-TD4-A01	HO1182103 / HO1183103
8	Smoked Sequential Outer LED Tail Lights — LH & RH Pair	Dark smoked C-shape LED design with sequential amber turn signals	33550-TBA-A01 / 33500-TBA-A01	HO2882102 / HO2883102
9	Inner Trunk-Lid LED Tail Lights — LH & RH Pair	Full LED configuration	34155-TBA-A01 / 34150-TBA-A01	HO2882103 / HO2883103
10	Rear Trunk-Lid License-Plate Garnish Panel	Sport-style glossy piano-black finish	74890-TBA-A11	HO1068112-Black

Important: The 10-Piece Master Bundle includes the glossy piano-black trunk garnish instead of the chrome garnish. Both garnish finishes are not included together.

Important Fitment Notice

Designed for compatible North American 2016–2018 Honda Civic Sedan pre-facelift models using the matching rear bumper, trunk-garnish, and lighting configuration.

Sedan models only. Does not fit Coupe or Hatchback models.

Verify the original bumper design, body style, trim configuration, electrical connectors, OEM reference numbers, and listed North American interchange numbers before ordering. Refer to the external vehicle fitment chart for complete compatibility details. The upgraded LED tail lights included with the 10-Piece Master Bundle may require wiring adjustments, adapters, resistors, or professional electrical installation depending on the vehicle’s original equipment.

Finish & Installation

The rear bumper cover is supplied in a primed finish and requires surface preparation, color matching, and painting before installation. The lower valance and related textured components are supplied in their stated finishes. Chrome, glossy-black, reflector, and lighting components should be protected during paint preparation. Test-fit all panels, brackets, trim pieces, reflectors, garnish panels, and lighting assemblies before painting, wiring, drilling, cutting, or making permanent modifications. Minor body-shop adjustment may be required for proper alignment and consistent panel gaps. Professional body-shop and automotive electrical installation are recommended. Painted, installed, wired, drilled, cut, damaged, or permanently modified components may not qualify for return under the VELNOX Auto Return Policy.

Folded Packaging Notice

The flexible rear bumper cover may be folded and securely wrapped for transportation to help reduce oversized shipping charges. Temporary bends, waves, or packaging impressions may be visible after unpacking. Place the bumper cover in a warm, clean area and allow it to recover its original shape before test-fitting and painting. Controlled warmth may be used when necessary. Do not apply excessive direct heat, as overheating may permanently deform or damage the plastic. Lighting assemblies and other delicate components are separately protected when included with the selected package.

FAQS

1. Are tail lights included with the Base Sedan Style?

No. Outer and inner tail-light assemblies are included only with the 10-Piece Master Bundle.

2. Is the rear bumper cover already painted?

No. The bumper cover is supplied in a primed finish and requires surface preparation, color matching, and painting before installation.

3. Does this kit fit Civic Coupe or Hatchback models?

No. Both package options are designed for compatible 2016–2018 Honda Civic Sedan pre-facelift models only.

Compatibility Disclaimer

This product is an aftermarket replacement and restoration package and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, trim names, and body-style descriptions are provided solely for product identification and compatibility verification. Custom lighting installation requirements may vary depending on the vehicle’s original wiring and equipment configuration. Honda® and Civic® are registered trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Low in stock

2021–2022 Honda Accord Exterior Trim Kit | Chrome & Dark Chrome

From $99.00 $169.99

-42%

Product Overview

Refresh the exterior appearance of your 2021–2022 Honda Accord with this OE-style aftermarket trim restoration package for compatible North American facelift models.

Two appearance options are available:

Chrome Luxury Spec
Dark-Chrome Night Sport Spec

Each option includes the matching front grille trim, front bumper trim, headlight eyebrow moldings, and rear lower-valance components for its intended appearance configuration. This listing includes exterior trim, garnish, molding, mesh, and support components only. Front and rear bumper covers, complete grilles, headlights, fog lights, and other major body parts are not included.

Choose Your Package

Chrome Luxury Spec

Mirror-chrome headlight eyebrow trim
Matching facelift front bumper side trim

Dark-Chrome Night Sport Spec

Dark smoked black-chrome headlight eyebrow trim
Matching Night Sport front bumper side trim

Shared Trim & Support Components

Included with Both Package Options

Qty	Component	OEM Reference	North American Interchange No.
1×	Front Grille Upper Chrome Wing Garnish	71122-TVE-F01	HO1200245
1×	Front Bumper Upper Retainer / Deflector Panel	71105-TVE-F00	HO1224103
1×	Rear Bumper Center Lower Honeycomb Mesh Panel — Textured Black Finish	71512-TVA-A80	HO1112112
1×	Rear Bumper Lower Valance Center Accent Strip — Mirror-Chrome Finish	71521-TVA-A80	HO1112109
1 Pair	Rear Bumper Lower Valance Side Extension Spoilers — Driver and Passenger Sides	71529-TVA-A80 / 71524-TVA-A80	HO1112106 / HO1113106

Chrome Luxury Spec Components

Qty	Component	OEM Reference	North American Interchange No.
1 Pair	Facelift Side Lower Front Bumper Protective Trim Strips — Driver and Passenger Sides	71119-TVE-A10 / 71114-TVE-A10	HO1046103 / HO1047103
1 Pair	Front Headlight Eyebrow Garnish Moldings — Mirror-Chrome Finish, Driver and Passenger Sides	71167-TVE-F01 / 71162-TVE-F01	HO1212123 / HO1213123

Dark-Chrome Night Sport Spec Components

Qty	Component	OEM Reference	North American Interchange No.
1 Pair	Night Sport Side Lower Front Bumper Protective Trim Strips — Driver and Passenger Sides	71119-TVE-H00 / 71114-TVE-H00	HO1046103 / HO1047103
1 Pair	Front Headlight Eyebrow Garnish Moldings — Dark Smoked Black-Chrome Finish, Driver and Passenger Sides	71167-TVE-F11 / 71162-TVE-F11	HO1212123-Black / HO1213123-Black

Important Information

This listing includes only the components shown under the selected package option.

The following items are not included:

Front bumper cover
Rear bumper cover
Complete front grille assembly
Headlight assemblies
Fog lights
Emblems
Sensors or wiring
Mounting hardware
Clips and retainers
Any component not specifically listed

Compatible original clips, brackets, fasteners, retainers, adhesive materials, or mounting hardware may need to be transferred from the vehicle or purchased separately. Finish varies by component and selected package, including chrome, dark chrome, gloss black, and textured black.

Fitment & Installation

Designed for compatible North American 2021–2022 Honda Accord facelift models using the matching Sport, Touring, or Hybrid exterior trim configuration. Do not select a package by trim name alone. Compare the original front bumper side strips, headlight eyebrow moldings, rear lower-valance trim, mounting points, finish, and listed reference numbers before ordering. Test-fit all components before permanent installation. Original clips, brackets, retainers, adhesive materials, or fasteners may need to be reused or replaced. Professional installation is recommended for proper alignment and secure attachment. Products that have been installed, damaged, modified, or permanently attached may not qualify for return under the VELNOX Auto Return Policy.

FAQS

1. Does this package include the bumper covers, complete grille, or headlights?

No. This listing includes selected exterior trim and garnish components only. The front and rear bumper covers, complete grille assembly, and headlight assemblies are not included.

2. Are mounting clips and hardware included?

No. Compatible original clips, retainers, brackets, adhesive materials, or fasteners may need to be transferred from the vehicle or purchased separately.

3. How should compatibility be confirmed?

Compare the original trim shape, finish, mounting configuration, OEM reference numbers, and North American interchange numbers with the selected package before ordering.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Low in stock

2021–2022 Honda Accord Rear Bumper Kit | Sport/Touring/Hybrid

$259.97 $399.97

-35%

Product Overview

This multi-component rear bumper kit is designed for compatible North American 2021–2022 Honda Accord facelift models using the Sport, Touring, or Hybrid rear bumper configuration. The package combines the primed rear bumper cover with the matching side bezels, lower valance trim, center mesh panel, chrome accent strip, absorber foam, side retainers, and decorative exhaust-outlet trim needed to restore the facelift rear-end appearance. The rear bumper cover is supplied in a primed finish and requires surface preparation, color matching, and painting before installation.

Package Components

Qty	Component	OEM Reference	North American Interchange No.
1×	Rear Bumper Cover Bare Shell — Primed Finish, Facelift Specification	04715-TVA-A10ZZ	HO1100318
1 Pair	Sport/Touring Rear Bumper Side Plaque Bezels — Driver and Passenger Sides	71514-TVE-F00 / 71519-TVE-F00	HO1112108-Plaque
1 Pair	Sport/Hybrid Rear Bumper Lower Valance Side Extension Spoilers — Driver and Passenger Sides	71529-TVA-A80 / 71524-TVA-A80	HO1112106 / HO1113106
1×	Rear Bumper Center Lower Honeycomb Mesh Grille Panel — Textured Black Finish	71512-TVA-A80	HO1112112
1×	Rear Bumper Lower Valance Center Accent Strip — Mirror-Chrome Finish	71521-TVA-A80	HO1112109
1×	Rear Bumper Absorber Foam Beam	—	—
1 Pair	Rear Bumper Side Retainer Brackets — Driver and Passenger Sides	—	—
1 Pair	Chrome Exhaust-Outlet Trim / Accent Covers — Driver and Passenger Sides	—	—

Reference Number Note

OEM and North American interchange numbers were not provided for the absorber foam beam, side retainer brackets, or chrome exhaust-outlet trim. These components are included in the package as listed.

Important Information

This listing includes only the components shown in the package table. Rear reflector lamps, parking sensors, reinforcement bar, emblems, wiring, clips, fasteners, mounting hardware, and any components not specifically listed are not included. The chrome exhaust-outlet pieces are decorative bumper trim components and are not functional exhaust pipes, mufflers, or replacement tailpipes. Compatible original hardware or vehicle-specific components may need to be transferred from the existing bumper assembly or purchased separately.

Fitment & Installation

Designed for compatible North American 2021–2022 Honda Accord facelift models using the matching Sport, Touring, or Hybrid rear bumper configuration. Do not select this kit by trim name alone. Before ordering, compare the original bumper shape, lower valance layout, side bezel design, exhaust-outlet trim, mounting points, and listed reference numbers. Test-fit all components before painting or permanent installation. Original clips, brackets, retainers, fasteners, or related hardware may need to be transferred or replaced. Professional surface preparation, paint matching, and installation are recommended for proper alignment and secure attachment. Products that have been painted, installed, drilled, cut, damaged, or permanently modified may not qualify for return under the VELNOX Auto Return Policy.

FAQS

1. Is the rear bumper cover already painted?

No. The bumper cover is supplied in a primed finish and must be prepared and painted to match the vehicle before installation.

2. Are parking sensors and rear reflector lamps included?

No. Parking sensors, wiring, rear reflector lamps, and related electronic components are not included.

3. How should compatibility be confirmed?

Compare the original bumper design, lower trim layout, mounting points, and exhaust-outlet configuration with the components and reference numbers listed above before ordering.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Low in stock

2021-2022 Honda Accord Front Bumper Kit | LX/EX-L & Sport/Touring

From $319.97 $499.97

-36%

Product Overview

This Front Bumper Restoration Kit is designed for compatible North American 2021–2022 Honda Accord facelift models. It combines the main exterior bumper components needed to replace a damaged or incomplete front-end setup while maintaining the updated mid-cycle body lines and factory-style appearance.

Two package options are available:

LX/EX-L Style
Sport/Touring Spec

Each option includes the shared bumper cover, grille component, lower center mesh grille, spoiler lip, and engine splash shield listed below, together with the matching side-trim configuration for the selected package. This kit is designed for the 2021–2022 facelift bumper layout and does not fit 2018–2020 pre-facelift models.

Shared Components Included with Both Package Options

Qty	Component	OEM Reference	North American Interchange No.
1×	Front Bumper Cover Bare Shell — Primed Finish, Facelift Specification	04711-TVE-H00ZZ	HO1000319
1×	Front Grille Upper Chrome Garnish / Grille Component	71122-TVE-F01	HO1200245
1×	Front Lower Center Mesh Vent Grille Panel	71312-TVA-F00 / 71317-TVA-F00	HO1200246
1×	Front Bumper Lower Spoiler Lip — Textured Black Finish	71310-TVE-F01	HO1012130
1×	Front Lower Engine Splash Shield / Chassis Protector	71310-TVE-F00	HO1228148

LX/EX-L Style-Specific Components

Designed for compatible Accord models using the matching LX/EX-L-style side mesh bumper trim configuration.

Qty

Component

OEM Reference

North American Interchange No.

1 Pair

Facelift Side Mesh Bumper Trim Covers — Driver and Passenger Sides

71102-TVA-F00 /

71107-TVA-F00

HO1038150 / HO1039150

Sport/Touring Spec-Specific Components

Designed for compatible Accord models using the matching ACC-opening grille and chrome-accented fog-light cover configuration.

Qty	Component	OEM Reference	North American Interchange No.
1 Pair	Facelift Slim-Slot Fog-Light Covers with Chrome Accent — Driver and Passenger Sides	71102-TVA-F10 / 71107-TVA-F10	HO1038153 / HO1039153

Sport/Touring Configuration Note

The grille configuration is designed around the applicable ACC radar opening. The radar sensor, radar bracket, control module, wiring, and calibration service are not included. The side pieces included with this package are fog-light covers only. Fog-light lamps, bulbs, switches, wiring harnesses, and related electrical components are not included.

Important Information

This listing includes only the components shown under the selected package option. The following items are not included:

Fog-light lamps or wiring
ACC radar sensor or bracket
Honda emblem
Parking sensors
Reinforcement bar
Impact absorber
Mounting brackets
Clips, retainers, and hardware
Any component not specifically listed

Compatible original components may need to be transferred from the existing bumper assembly or purchased separately. The bumper cover is supplied in a primed finish. Primer color may vary, and professional surface preparation and painting are required before installation.

Fitment & Installation

Designed for compatible North American 2021–2022 Honda Accord facelift models when the selected package, original bumper configuration, OEM reference numbers, and North American interchange numbers match the vehicle. Do not select a package by trim name alone. Compare the original grille design, side bumper trim, radar configuration, mounting points, and listed reference numbers before ordering. Test-fit all components before painting or permanent installation. Original clips, retainers, brackets, or hardware may need to be reused or replaced.

Professional preparation, paint matching, and installation are recommended for proper alignment and secure attachment. Products that have been painted, installed, drilled, cut, damaged, or permanently modified may not qualify for return under the VELNOX Auto Return Policy.

FAQS

1. Is the front bumper cover already painted?

No. It is supplied in a primed finish and must be prepared and painted to match the vehicle before installation.

2. Will this kit fit a 2018–2020 Honda Accord?

No. This kit is designed only for the 2021–2022 facelift bumper configuration.

3. How should compatibility be confirmed?

Compare the original bumper layout, grille design, side-trim style, mounting points, OEM reference numbers, and North American interchange numbers with the selected package before ordering.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Low in stock

2018–2020 Honda Accord Rear Bumper Kit | LX/EX & Sport/Touring

From $249.97 $399.97

-38%

Product Overview

This Rear Bumper Restoration Kit is designed for compatible 2018–2020 Honda Accord models sold in North America. It combines the major exterior, mounting, and structural components needed to replace a damaged or incomplete rear bumper setup while helping restore the vehicle’s original rear-end appearance and alignment.

Two package configurations are available:

Gasoline LX/EX Style — Single Hidden Exhaust Configuration
Sport/Touring Spec — Dual Exposed Exhaust Configuration

Both options include a primed rear bumper cover, steel reinforcement bar, side retainer brackets, license-plate garnish, and rear reflector lamps. The Sport/Touring package also includes the textured lower diffuser and dual chrome exhaust-outlet trim used with the exposed dual-exhaust design. The bumper cover is supplied in a primed finish and requires preparation and painting before installation.

Compare Package Options

Feature	Gasoline LX/EX Style	Sport/Touring Spec
Exhaust Configuration	Single Hidden Exhaust	Dual Exposed Exhaust
Lower Valance / Diffuser	Not Included	Included
License-Plate Garnish	Textured Black, Single-Hole Style	Piano Black & Chrome, Dual-Hole Style
Chrome Exhaust-Outlet Trim	Not Included	Included

Shared Components

Included with Both Package Options

Qty	Component	OEM Reference	North American Interchange No.
1×	Rear Bumper Reinforcement Bar — High-Strength Steel	71530-TVE-H00	HO1106126
1 Pair	Rear Bumper Side Retainer Brackets — Driver and Passenger Sides	71598-TVA-A01 / 71593-TVA-A01	HO1142100 / HO1143100
1 Pair	Rear Bumper Red Reflector Lamp Assemblies — Driver and Passenger Sides	33555-TVA-H01 / 33505-TVA-H01	HO2830104 / HO2831104

Gasoline LX/EX Style Components

Designed for compatible Accord models using the original single hidden-exhaust rear bumper configuration.

Qty	Component	OEM Reference	North American Interchange No.
1×	Rear Bumper Cover Bare Shell — Primed Finish, Single Hidden Exhaust Configuration	04715-TVE-H50ZZ	HO1100310
1×	Rear License-Plate Bracket Garnish Holder — Textured Black, Low-Spec Single-Hole Configuration	74890-TVE-H01	HO1044119

Sport/Touring Spec Components

Designed for compatible Accord models using the original dual exposed-exhaust rear bumper configuration.

Qty	Component	OEM Reference	North American Interchange No.
1×	Rear Bumper Cover Bare Shell — Primed Finish, Dual Exposed Exhaust Configuration	04715-TVE-H50ZZ	HO1100310
1×	Sport/Touring Rear Bumper Lower Valance Diffuser — Textured Black, Dual Exhaust-Outlet Design	71510-TWA-A00	HO1112104
1×	Tailgate Center License-Plate Garnish — Piano Black and Mirror-Chrome Finish, High-Spec Dual-Hole Configuration	74890-TVE-H11	HO1044120
1×	Driver-Side Rear Chrome Exhaust-Outlet Accent Cover	18320-TVE-H01	HO1112105
1×	Passenger-Side Rear Chrome Exhaust-Outlet Accent Cover	18310-TVE-H01	HO1113105

Important Information

This listing includes only the components shown under the selected package option. The impact absorber, parking sensors, exhaust pipes, mufflers, wiring, emblems, mounting hardware, clips, retainers, and any components not specifically listed are not included. The chrome exhaust pieces included with the Sport/Touring package are decorative rear bumper outlet trim covers. They are not replacement exhaust pipes, mufflers, or functional tailpipes. Compatible original hardware and vehicle-specific components may need to be transferred from the existing bumper assembly or purchased separately.

Fitment & Installation

Designed for compatible North American 2018–2020 Honda Accord models when the selected package, original rear bumper configuration, OEM reference numbers, and North American interchange numbers match the vehicle. The Gasoline LX/EX Style option is intended for the single hidden-exhaust layout with the textured-black license-plate garnish.

The Sport/Touring Spec option is intended for the dual exposed-exhaust layout with the lower diffuser, premium tailgate garnish, and chrome exhaust-outlet trim shown above. Before ordering, verify:

Rear bumper and exhaust configuration
Lower valance or diffuser design
License-plate garnish style
Reflector openings
Parking-sensor provisions
OEM and North American interchange numbers

The rear bumper cover is supplied in a primed finish and may require sanding, cleaning, sealing, paint preparation, and professional color matching before installation. Test-fit all components before painting or making permanent modifications. Confirm mounting points, panel gaps, diffuser alignment, reflector placement, garnish fitment, and exhaust-trim positioning.

Professional installation is recommended, especially when transferring the reinforcement bar or aligning the Sport/Touring diffuser and exhaust-outlet trim. Products that have been painted, installed, drilled, cut, damaged, or permanently modified may not qualify for return under the VELNOX Auto Return Policy.

FAQS

1. Is the rear bumper cover already painted?

No. The rear bumper cover is supplied in a primed finish and must be prepared and painted to match the vehicle before installation.

2. Does the Gasoline LX/EX package include the lower diffuser or chrome exhaust trim?

No. Those components are included only with the Sport/Touring Spec package.

3. Are the chrome exhaust pieces functional exhaust tips?

No. They are decorative bumper outlet trim covers. Exhaust pipes, mufflers, and other functional exhaust components are not included.

4. Are parking sensors included?

No. Parking sensors, wiring, and related electronic components are not included. Verify the bumper’s sensor configuration before ordering.

5. How should compatibility be confirmed?

Compare the vehicle’s original bumper design, exhaust layout, diffuser, license-plate garnish, reflector openings, and sensor provisions with the selected package. Confirm all listed OEM and North American interchange numbers before purchase.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Low in stock

2018-2020 Honda Accord Front Bumper Kit | LX & Sport/Touring

From $299.97 $429.97

-30%

Product Overview

This Front Bumper Restoration Kit is designed for compatible 2018-2020 Honda Accord models sold in North America. It combines the major exterior bumper components needed to replace a damaged or incomplete front-end setup while helping restore the vehicle’s original body lines and factory-style appearance.

Two package options are available:

LX Base Style — Non-Radar
Sport/Touring-Style — ACC Grille with LED Fog Lights

Both options include the shared bumper components listed below. The grille, side-trim, and fog-light configuration vary according to the selected package.

Compare Package Options

Feature	LX Base Style	Sport/Touring-Style
Main Front Grille	Non-Radar LX Style	Chrome/Gloss Black with ACC Opening
Side Bumper Trim	Mesh Trim Covers	Chrome-Accented Fog-Light Covers
LED Fog Lights	Not Included	Included
Wiring Harness	Not Included	Included
Intended Configuration	LX Non-Radar Setup	ACC Grille and LED Fog-Light Setup

Shared Components

Included with Both Package Options

Qty	Component	OEM Reference	North American Interchange No.
1×	Front Bumper Cover Bare Shell — Primed Finish	04711-TVA-A00ZZ / 04711-TVE-H00ZZ	HO1000311
1×	Front Grille Upper Chrome Molding Strip	71121-TVE-H21	HO1200232
1×	Front Lower Bumper Center Mesh Air Grille Panel	71122-TVA-A10	HO1200233
1×	Front Bumper Lower Guard Spoiler Lip	71310-TVE-H00	HO1012119
1×	Front Lower Engine Splash Shield / Chassis Cover	74110-TVE-H01	HO1228148

LX Base Style-Specific Components

Designed for compatible Accord models equipped with the original LX-style non-radar front bumper configuration.

Qty	Component	OEM Reference	North American Interchange No.
1×	LX Base Style Non-Radar Front Grille	71111-TVE-H01	HO1200230
1 Pair	LX Base Style Side Mesh Bumper Trim Covers — Driver and Passenger Sides	71164-TVE-H01 / 71169-TVE-H01	HO1038148 / HO1039148

LX Package Note

For the LX Base Style package, the lower center mesh grille, reference 71122-TVA-A10 / HO1200233, is normally supplied pre-assembled inside the main grille package associated with 71111-TVE-H01. It may not be packed as a separate loose component.

Sport/Touring-Style Specific Components

Designed for compatible Accord models equipped with the original ACC-opening grille and slim LED fog-light configuration.

Qty	Component	OEM Reference	North American Interchange No.
1×	Chrome and Gloss Black Front Grille with ACC Radar Opening	71111-TVE-H03	HO1200237
1 Pair	Slim-Slot Fog-Light Covers with Chrome Accent — Driver and Passenger Sides	71102-TVA-A00 / 71107-TVA-A00	HO1038144 / HO1039144
1 Pair	Slim LED Fog-Light Assemblies — Driver and Passenger Sides	33500-TVA-H00	HO2592143 / HO2593143
1×	Relay, Switch, and Wiring Harness Assembly	HNS-10TH-ACC-GP	Universal Reference

Sport/Touring Package Notes

The grille includes an opening for the applicable ACC radar configuration. The radar sensor, radar bracket, control module, calibration service, and related driver-assistance components are not included. The included wiring harness is designed to support the supplied LED fog lights. Connector compatibility, wire routing, switch placement, and installation requirements may vary depending on the vehicle’s original electrical configuration.

Important Information

This listing includes only the components shown under the selected package option. The bumper reinforcement bar, impact absorber, ACC radar sensor and bracket, Honda emblem, mounting hardware, clips, retainers, screws, and any parts not specifically listed are not included. Compatible original hardware and factory components may need to be transferred from the existing bumper assembly or purchased separately.

Fitment & Installation

Fitment is guaranteed when the selected package, original bumper configuration, OEM reference numbers, and North American interchange numbers match the vehicle. The LX Base Style option is intended for the non-radar LX-style setup. The Sport/Touring-Style option is intended for vehicles using the ACC-opening grille and slim LED fog-light setup.

Before ordering, verify the vehicle year, trim level, grille design, radar configuration, fog-light setup, and original bumper layout. The front bumper cover is supplied in a primed finish and may require sanding, cleaning, sealing, paint preparation, and professional color matching before installation. Test-fit all components before painting, wiring, or making permanent modifications. Confirm mounting points, grille alignment, trim placement, fog-light positioning, splash-shield alignment, and panel gaps.

Vehicles equipped with ACC radar or other driver-assistance systems may require transfer of the original equipment and professional recalibration after installation. Products that have been painted, installed, drilled, cut, wired, damaged, or permanently modified may not qualify for return under the VELNOX Auto Return Policy.

FAQS

1. Does the LX package include LED fog lights?

No. The LX package includes side mesh bumper trim covers and does not include fog lights, fog-light covers, or fog-light wiring.

2. Is the ACC radar sensor included with the Sport/Touring package?

No. The grille includes the applicable ACC opening, but the radar sensor, mounting bracket, control equipment, and calibration service are not included.

3. Is the front bumper cover already painted?

No. The front bumper cover is supplied in a primed finish and must be prepared and painted to match the vehicle before final installation.

4. How should compatibility be verified before ordering?

Verify the vehicle year, trim, grille style, radar configuration, fog-light setup, and original bumper layout. Then compare the listed OEM reference numbers and North American interchange numbers with the original components.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda®, Accord®, LX®, Sport®, Touring®, and related names are registered trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Low in stock

2020–2022 Honda CR-V Front Bumper Cover Kit

2020–2022 Honda CR-V Front Bumper Cover & Lower Valance Kit

$299.97 $459.97

-35%

Product Overview

Restore the complete front bumper appearance of your 2020–2022 Honda CR-V with this Complete Front Bumper Cover Assembly Kit, designed for compatible North American Facelift (Mid-Cycle) models. This complete 2-piece front bumper bundle combines the Front Upper Bumper Cover and the Front Lower Valance with the factory-installed Center Honeycomb Mesh Grille into one convenient replacement package. Whether you're repairing collision damage or replacing worn bumper components, this kit helps restore a clean factory-style appearance while eliminating the need to purchase the upper and lower sections separately.

For fitment verification, compare your original components with the following reference numbers before ordering:

OEM Part Number: 04711-TLY-H50
OEM Part Number: 71502-TLY-H50
North American Interchange Numbers: HO1000320 / HO1200236

Package Includes

Gasoline LX / EX Style Components

Qty	Component	OEM Reference	North American Interchange No.
1×	Front Upper Bumper Cover Bare Skin Shell Panel (Primed Gray/Black Finish • Facelift Mid-Cycle Spec)	04711-TLY-H50	HO1000320
1×	Front Lower Bumper Valance Skirt with Pre-Installed Center Honeycomb Mesh Grille Panel (Textured Black Matte Finish)	71502-TLY-H50	HO1200236

Important Information

This listing includes both the Front Upper Bumper Cover and the Front Lower Bumper Valance with the factory pre-installed Center Honeycomb Mesh Grille Panel.

The following components are NOT included:

Front upper grille assembly
Front emblem
Headlight eyebrow garnish moldings
Fog lamp housings
Fog lamp bezel covers
Mounting brackets
Hardware
Sensors
Wiring
Any other components not specifically listed

Any components not included with this listing must be transferred from the original vehicle or purchased separately.

Fitment & Installation

✓ 100% Fitment Guaranteed for compatible North American 2020–2022 Honda CR-V Facelift (Mid-Cycle) Gasoline LX and EX models when the original bumper configuration and reference numbers match this package. This factory-matched 2-in-1 bundle combines the upper bumper cover and the lower valance with the integrated center honeycomb mesh grille, providing a complete front bumper exterior replacement in one package. Both components are shipped together in one oversized heavy-duty reinforced protective carton via FedEx Ground, with premium protective foam packaging designed to help prevent shipping damage. Always test-fit both components before painting or permanent installation. Products that have been painted, installed, drilled, cut, damaged, or permanently modified may not qualify for return under the VELNOX Auto Return Policy.

FAQS

1. What is included in this kit?

This package includes:

One Front Upper Bumper Cover Bare Skin Shell Panel
One Front Lower Bumper Valance with the integrated Center Honeycomb Mesh Grille Panel

2. Does this include the upper grille, emblem, or fog light trim?

No. The upper grille assembly, emblem, headlight eyebrow garnish moldings, fog lamp housings, fog lamp bezel covers, hardware, and other related components are not included.

3. Does the upper bumper cover come painted?

No. The upper bumper cover is supplied in a primed finish and requires professional preparation and painting before installation.

4. Does the lower valance require painting?

No. The lower valance is manufactured with a textured black matte finish and is ready for installation.

5. How do I verify fitment?

Compare your original components with:

04711-TLY-H50 / HO1000320
71502-TLY-H50 / HO1200236

Also verify your vehicle's model year, trim level, and bumper configuration before ordering.

6. Why are both components shipped together?

Shipping both primary bumper components together helps simplify installation, reduce shipping costs, and ensure both parts arrive in the same reinforced protective package.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM assembly. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other reference identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda®, CR-V®, LX®, EX®, and all related vehicle names are registered trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Low in stock

2020-2022 Honda CR-V Front Lower Bumper Valance with Center Grille | HO1200236

$189.97 $299.97

-37%

Product Overview

A damaged lower bumper valance can make the front of your Honda CR-V look incomplete, even when the upper bumper cover remains in good condition. This Front Lower Bumper Valance Skirt with Integrated Center Honeycomb Mesh Grille Assembly is designed to replace the original lower assembly and restore the factory-style appearance without replacing the entire front bumper. Engineered as an OE-style aftermarket replacement for compatible North American 2020–2022 Honda CR-V Facelift models, this assembly features a durable textured black matte finish with the center honeycomb mesh grille factory pre-installed, allowing for a cleaner installation while maintaining the original design.

For fitment verification, compare your original part with:

OEM Part Number: 71502-TLY-H50
North American Interchange Number: HO1200236

Important Information

This listing includes the Front Lower Bumper Valance Skirt with the factory pre-installed Center Honeycomb Mesh Grille Assembly ONLY.

The following components are NOT included:

Front upper bumper cover
Main front emblem
Headlight eyebrow garnish moldings
Fog light housings
Fog light bezel covers
Upper front grille assembly
Mounting brackets
Hardware
Sensors
Wiring
Any other related components not specifically listed

Any components not included with this listing must be transferred from the original vehicle or purchased separately.

Fitment & Installation

100% Fitment Guaranteed for compatible North American 2020–2022 Honda CR-V Facelift models when the OEM part number, North American interchange number, and original bumper configuration match this listing. The integrated center honeycomb mesh grille comes pre-installed, allowing the lower valance to be installed as one complete assembly. Each unit is shipped in a full-sized rigid protective freight box to help prevent warping or shipping damage to the integrated honeycomb grille structure. Always test-fit the assembly before installation or making any permanent modifications. Products that have been painted, installed, drilled, cut, damaged, or permanently modified may not qualify for return under the VELNOX Auto Return Policy.

FAQS

1. What is included with this listing?

This listing includes one Front Lower Bumper Valance Skirt with the integrated Center Honeycomb Mesh Grille Assembly. No additional bumper components are included unless specifically stated.

2. Does this include the upper bumper cover, emblem, or fog light trim?

No. The upper bumper cover, front emblem, headlight eyebrow garnish moldings, fog light housings, fog light bezel covers, upper grille assembly, and other related components are not included.

3. Is the center honeycomb grille included?

Yes. The center honeycomb mesh grille is factory pre-installed into the lower bumper valance assembly and is included with this listing.

4. Is the lower valance already finished?

Yes. The valance is manufactured with a textured black matte finish and is designed for installation without additional painting.

5. How do I verify fitment?

Compare your original part with:

OEM Part Number: 71502-TLY-H50
North American Interchange Number: HO1200236

Also verify your vehicle's model year, trim level, and front bumper configuration before ordering.

6. Why is this product shipped in a rigid protective box?

The integrated honeycomb mesh grille is molded as part of the lower valance assembly. A full-sized rigid protective shipping box helps minimize the risk of warping or impact damage during transportation.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other reference identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement component before purchase. Honda®, CR-V®, and all related vehicle names are registered trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Low in stock

2017-2019 Honda CR-V Front Bumper Cover & Lower Valance Kit

$289.97 $459.97

-37%

Product Overview

A damaged front bumper can leave your Honda CR-V looking incomplete and may require more than replacing a single panel. This Front Bumper Cover Kit combines the two primary exterior bumper components into one package: the upper bumper cover and the lower valance with an integrated center honeycomb mesh grille. Designed for compatible North American 2017–2019 Honda CR-V Pre-Facelift LX and EX models, this two-piece kit provides a practical solution for collision repair, front-end restoration, or replacement of damaged factory bumper panels.

For fitment verification, compare your original parts with:

OEM Part Number: 04711-TLA-A00ZZ
OEM Part Number: 71102-TLA-A00
North American Interchange Numbers: HO1000305 / HO1200223

Package Includes

Qty	Component	OEM Reference	North American Interchange No.
1×	Front Upper Bumper Cover Bare Shell Panel, Primed	04711-TLA-A00ZZ	HO1000305
1×	Front Lower Bumper Valance Skirt with Pre-Assembled Center Honeycomb Mesh Grille, Textured Black Matte	71102-TLA-A00	HO1200223

Important Information

This package includes the two primary front bumper exterior panels only. It is not a complete front-end hardware assembly.

The following components are not included:

Upper front grille assembly
Chrome grille bars or trim
Fog lights
Fog light housings or bezel covers
Front emblem
Reinforcement or crash beam
Mounting brackets
Retainers and hardware
Sensors
Wiring
Any other components not specifically listed above

Compatible original parts may need to be transferred from the existing bumper assembly or purchased separately.

Fitment & Installation

100% Fitment Guaranteed for compatible North American 2017–2019 Pre-Facelift LX and EX models when the vehicle’s original bumper configuration and reference numbers match this listing. The upper bumper cover is supplied in a primed finish and requires professional preparation and painting. The lower valance has a textured black matte finish and includes the center honeycomb mesh grille pre-assembled.

This kit is designed as a direct replacement for compatible factory applications, with no vehicle modifications required. Always test-fit both components before painting or permanent installation. Products that have been painted, installed, drilled, cut, damaged, or permanently modified may not qualify for return under the VELNOX Auto Return Policy.

FAQS

1. Is this a complete front bumper assembly?

No. This is a two-piece bumper cover kit containing the upper bumper cover and lower valance with integrated center grille. The upper grille, fog lights, reinforcement, brackets, hardware, and other components are not included.

2. Is the center grille included?

Yes. The center honeycomb mesh grille is pre-assembled into the lower bumper valance.

3. Does the upper bumper cover come painted?

No. The upper bumper cover is supplied in a primed finish and requires professional preparation and painting before installation.

4. Does the lower valance require painting?

No. The lower valance is supplied with a textured black matte finish.

5. How do I verify fitment?

Confirm that your vehicle is a compatible North American 2017–2019 Honda CR-V Pre-Facelift LX or EX model, then compare your original components with:

04711-TLA-A00ZZ / HO1000305
71102-TLA-A00 / HO1200223

6. Should both components be test-fitted before painting?

Yes. Test-fit the upper bumper cover and lower valance before painting, drilling, cutting, or making any permanent modifications.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM assembly. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other reference identifiers are provided solely for product identification and compatibility-reference purposes. Honda® and CR-V® are registered trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Low in stock

2017-2019 Honda CR-V Front Lower Bumper Valance with Center Grille | HO1200223

$179.97 $289.97

-38%

Product Overview

The lower bumper valance plays an important role in defining the front-end appearance of your Honda CR-V while helping protect the lower bumper area and supporting proper airflow through the center grille opening. Whether your original valance has been damaged in a minor collision, scraped on curbs, or cracked from everyday driving, replacing it is an effective way to restore your vehicle's factory-style appearance. This Front Lower Bumper Valance Skirt Diffuser with Integrated Center Honeycomb Mesh Grille Air Panel is an OE-style aftermarket replacement designed for compatible North American 2017–2019 Honda CR-V models. Manufactured with a durable textured black matte finish, it delivers a clean factory-style look without requiring paint.

For fitment verification, please compare your original part with OEM Part Number 71102-TLA-A00 and North American Interchange Number HO1200223 before ordering.

Important Information

This listing includes the Front Lower Bumper Valance Skirt with the pre-assembled Center Honeycomb Mesh Grille Skeleton ONLY.

The following components are NOT included:

Upper bumper cover
Upper front grille assembly
Chrome grille trim
Fog light housings
Fog light bezel covers
Mounting hardware
Sensors
Emblems
Any other related components unless specifically stated

Compatible original components may be transferred from your existing bumper assembly if required.

Fitment & Installation

100% Fitment Guaranteed for compatible North American 2017–2019 Honda CR-V models when the OEM part number, North American interchange number, and original bumper configuration match this product. This product is shipped exclusively in a full-sized rigid protective shipping case via FedEx Ground to help protect the integrated honeycomb grille structure during transportation. Always test-fit the valance before installation. Professional installation is recommended to help ensure proper alignment and factory-style fitment. Products that have been installed, damaged, drilled, cut, or permanently modified may not qualify for return under the VELNOX Auto Return Policy.

FAQS

1. What is included with this listing?

This listing includes one Front Lower Bumper Valance Skirt with the integrated Center Honeycomb Mesh Grille Skeleton. No additional bumper components are included unless specifically stated.

2. Does this include the upper bumper cover or upper grille?

No. The upper bumper cover, upper grille assembly, chrome grille trim, fog light housings, and other related components are not included.

3. Does this part require painting?

No. This valance is manufactured with a textured black matte finish and is designed to be installed without painting.

4. How do I verify fitment?

Compare your original part with:

OEM Part Number: 71102-TLA-A00
North American Interchange Number: HO1200223

Also verify your vehicle's year, trim level, and front bumper configuration before ordering.

5. Why is this shipped in a rigid protective case?

The integrated honeycomb mesh grille is molded as part of the valance assembly. A full-sized rigid protective shipping case helps reduce the risk of damage during transportation and helps ensure the grille arrives ready for installation.

Compatibility Disclaimer

This is an aftermarket replacement part and is not a genuine Honda OEM product. OEM part numbers, North American interchange numbers, vehicle names, model names, and other reference identifiers are provided solely for product identification and compatibility-reference purposes. Honda® and CR-V® are registered trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Low in stock

2020-2022 Honda CR-V Complete Rear Bumper Cover Kit

From $299.97 $549.97

-45%

Product Overview

Restore the rear-end appearance of your 2020–2022 Honda CR-V with this Complete Rear Bumper Cover Assembly Kit, designed for compatible North American models. Whether you're repairing collision damage, replacing worn or damaged components, or restoring your vehicle's original factory appearance, this complete package combines the essential rear bumper components into one convenient solution.

Two complete package options are available to match different factory rear bumper configurations:

Gasoline LX / EX Style
Hybrid Premium Style

Please select the package that matches your vehicle's original rear bumper configuration before ordering.

Compare Kit Options

Feature	Gasoline LX / EX Style	Hybrid Premium Style
Rear Bumper Cover Assembly	✔	✔
Rear Lower Valance	Gasoline Style	Hybrid Style
Tailgate Chrome Garnish	✔	✔
Rear Reflector Lamps	✔	✔

Gasoline LX / EX Style Components

Qty	Component	OEM Reference	North American Interchange No.
1×	Complete Rear Bumper Cover Assembly (Upper & Lower Textured Black Built-in Total Shell)	71501-TLA-A50 / 71501-TLY-H50	HO1100318
1×	Rear Bumper Lower Valance Accent Shield Strip – Dull Silver	71511-TLA-A50	HO1112117
1×	Tailgate Rear Trunk Center Chrome Fly-Wing Accent Garnish (Upgraded Premium Full Chrome Coating Pre-Included)	74895-TLA-A51 / 74895-TLY-H11	HO1044123
1×	Left Rear Bumper Reflector Light Lamp Assembly (LH)	34550-TLA-H11	HO2830105
1×	Right Rear Bumper Reflector Light Lamp Assembly (RH)	34500-TLA-H11	HO2831105

Premium Chrome Upgrade Included

Unlike standard replacement kits, this package includes the upgraded premium full chrome-coated tailgate center garnish as part of the complete assembly. Designed to match the factory appearance, this premium chrome trim provides a clean, finished look while eliminating the need to purchase the center garnish separately.

Hybrid & Touring Style Components

Qty	Component	OEM Reference	North American Interchange No.
1×	Complete Rear Bumper Cover Assembly (Upper & Lower Textured Black Built-in Total Shell)	71501-TLA-A50 / 71501-TLY-H50	HO1100318
1×	Premium Rear Bumper Lower Valance Accent Strip – Gloss Dark Chrome with Dual Exhaust Outlets (Pre-Assembled & Pre-Installed Inside Valance Skirt)	71511-TMA-H41	HO1112111
1×	Premium Tailgate Rear Trunk Center Chrome Fly-Wing Accent Garnish	74895-TLA-A61 / 74895-TLY-H11	HO1044124
1×	Left Rear Bumper Reflector Light Lamp Assembly (LH)	34550-TLA-H11	HO2830105
1×	Right Rear Bumper Reflector Light Lamp Assembly (RH)	34500-TLA-H11	HO2831105
1 Set	Complete Touring-Spec Rear Side Reflector Protection Bezel Kit (2-in-1 Pair)	Partslink Reference	HO1112118 / HO1113118
1×	Left Touring High-Spec Reflector Bezel / Cover	71540-TMA-H41	HO1112118
1×	Right Touring High-Spec Reflector Bezel / Cover	71545-TMA-H41	HO1113118

Premium Touring Features

The Hybrid & Touring Style package includes the factory-style Gloss Dark Chrome rear lower valance accent strip with dual exhaust outlet openings, delivering the premium appearance found on high-spec Touring and Hybrid models. Unlike standard replacement kits, the Touring-spec rear reflector protection bezels are included as a complete factory-style bundle, providing a finished appearance around both rear reflectors while helping restore the original bumper design.

Fitment & Installation

Select the package that matches your vehicle's original rear bumper configuration. 100% Fitment Guaranteed for compatible North American high-spec Touring, Sport, and Hybrid models with dual exhaust configuration when the correct package is selected. Each kit ships in one reinforced heavy-duty carton via FedEx Ground with premium protective packaging. Always test-fit all components before painting or permanent installation. Products that have been painted, installed, damaged, or permanently modified may not qualify for return under the VELNOX Auto Return Policy.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM assembly. OEM reference numbers, North American interchange numbers, Partslink numbers, factory reference numbers vehicle names, model names, trim names, and other reference identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda®, CR-V®, LX®, EX®, EX-L®, Sport®, Touring®, Hybrid®, and all related vehicle names are registered trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Low in stock

Complete Front Bumper Cover Assembly Kit for 2020-2022 Honda CR-V

2020-2022 Honda CR-V Complete Front Bumper Assembly Kit

From $399.97 $699.97

-43%

Product Overview

Restore the front-end appearance of your 2020–2022 Honda CR-V with this Complete Front Bumper Cover Assembly Kit, designed for compatible North American models. Whether you're repairing collision damage, replacing worn or damaged components, or restoring your vehicle to a clean factory-style appearance, this complete package includes the major front bumper components needed for a professional-quality repair.

Two complete package options are available to match different factory front-end configurations:

LX / EX Base Style
Touring Luxury Style

Each package is carefully configured to match its corresponding factory bumper design and includes the primary exterior components required for front bumper restoration.

Compare Kit Options

Feature	LX / EX Base Style	Touring Luxury Style
Front Grille	Matte Black	Premium Chrome Accent
Fog Light Trim	LX / EX Style	Touring Luxury Style
LED Fog Lights	Premium Round LED	Premium Blade-Style Five-Star LED
Plug-and-Play Wiring Harness	✔	✔
Crash Beam	✔	✔
License Plate Bracket	✔	✔

LX / EX Base Style Components

Qty	Component	OEM Reference	North American Interchange No.
1×	Front Upper Bumper Cover Bare Shell (Paintable Finish)	04711-TLY-H50 / 04711-TLA-A50ZZ	HO1000320
1×	Front Lower Bumper Cover Valance Skirt (Textured Black)	71502-TLY-H50 / 71502-TLA-A50	HO1012116
1×	OEM-Style Matte Black Front Grille	71121-TLY-H50-Low / 71121-TLA-A51	HO1200236
1×	Front Bumper Core Iron Support Crash Beam	71300-TLY-H50 / 71300-TLA-A50	HO1040118
1×	Front License Plate Mounting Bracket Holder	71145-TLY-H50 / 71145-TLA-A50	HO1114115
1 Pair	LX / EX Style Bumper Corner Fog Light Trim Covers (LH & RH)	71118-TLA-A50 / 71113-TLA-A50	HO1046103 / HO1047103
1 Set	Complete Premium Round LED Fog Light Upgrade Sub-Kit (4-in-1)	Total 4-In-1 Set	HO1038159 / HO1039159 / HO2592144 / HO2593144
1×	Left Lower Bumper Fog Light Bezel / Cover	71156-TLY-H51	HO1038159
1×	Right Lower Bumper Fog Light Bezel / Cover	71106-TLY-H51	HO1039159
1 Pair	Premium Round LED Fog Light Lamp Assemblies (LH & RH)	33950-TLA-A01 / 33900-TLA-A01	HO2592144 / HO2593144
1×	Plug-and-Play Relay & Switch Wiring Harness Kit	HNS-20CRV-LX	—

Touring Luxury Style Components

Qty	Component	OEM Reference	North American Interchange No.
1×	Front Upper Bumper Cover Bare Shell (Paintable Finish)	04711-TLY-H50 / 04711-TLA-A50ZZ	HO1000320
1×	Front Lower Bumper Cover Valance Skirt (Textured Black)	71502-TLY-H50 / 71502-TLA-A50	HO1012116
1×	Premium Chrome Accent Luxury Front Grille Assembly	71121-TLY-H50-Prem / 71121-TLA-A71	HO1200237
1×	Front Bumper Core Iron Support Crash Beam	71300-TLY-H50 / 71300-TLA-A50	HO1040118
1×	Front License Plate Mounting Bracket Holder	71145-TLY-H50 / 71145-TLA-A50	HO1114115
1 Pair	Touring High-Spec Bumper Corner Fog Light Trim Covers (LH & RH)	71118-TLA-A70 / 71113-TLA-A70	HO1046105 / HO1047105
1 Set	Complete Blade-Style Five-Star LED Fog Light Upgrade Sub-Kit (4-in-1)	Total 4-In-1 Set	HO1038164 / HO1039164 / HO2592147 / HO2593147
1×	Left Touring LED Fog Light Bezel / Cover	71156-TLA-A70	HO1038164
1×	Right Touring LED Fog Light Bezel / Cover	71106-TLA-A70	HO1039164
1 Pair	Premium Blade-Style Five-Star LED Fog Light Lamp Assemblies (LH & RH)	33950-TLA-A71 / 33900-TLA-A71	HO2592147 / HO2593147
1×	Touring-Spec Plug-and-Play Relay & Switch Wiring Harness Assembly	HNS-20CRV-TR	—

Fitment & Installation

Select the kit that matches your vehicle’s original front bumper style and factory equipment. 100% fitment guaranteed for compatible North American models when the correct kit option is selected. Always test-fit all components before painting or permanent installation. The bumper cover requires professional preparation and painting, and professional body-shop installation is recommended. The included fog light wiring kit is plug-and-play and does not require cutting or splicing the factory wiring. Products that have been painted, installed, damaged, or permanently modified may not qualify for return under the VELNOX Auto Return Policy.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, Partslink numbers, supplier catalog numbers, factory reference numbers, universal codes, vehicle names, model names, and trim designations are provided solely for product identification and compatibility-reference purposes. Honda®, CR-V®, Touring®, Sport®, EX®, EX-L®, Hybrid®, and all related vehicle names are registered trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Low in stock

2017–2019 Honda CR-V Complete Rear Bumper Kit

From $299.97 $599.97

-50%

Product Overview

Restore the rear-end appearance of your 2017–2019 Honda CR-V with this Complete Rear Bumper Cover Assembly Kit. Designed for compatible North American models, each kit combines the essential rear bumper components into one convenient package, making collision repair, rear-end restoration, or bumper replacement easier than purchasing individual parts separately.

Two kit configurations are available to match different factory rear bumper designs:

Gasoline Base Style
Hybrid Premium Style

Please select the kit that matches your vehicle's original rear bumper configuration before ordering.

Compare Kit Options

Feature	Gasoline Base Style	Hybrid Premium Style
Rear Bumper Cover	✔	✔
Rear Lower Valance	Gasoline Style	Hybrid Style
License Plate Bracket Garnish	✔	✔
Rear Reflectors	✔	✔

Gasoline Base Style Components

Qty	Component	OEM Reference	North American Interchange No.
1×	Rear Bumper Cover Bare Shell (Upper & Lower Textured Black)	71501-TLY-H00	HO1100282
1×	OEM-Style Rear Bumper Lower Valance Lip Skirt (Gasoline Version)	71510-TLY-H01	HO1112108
1×	Rear License Plate Bracket Garnish Holder Base	74895-TLY-H01	HO1044111
1×	Left Rear Bumper Reflector Lamp Assembly (LH)	34550-TLY-H01	HO2830103
1×	Right Rear Bumper Reflector Lamp Assembly (RH)	34500-TLY-H01	HO2831103

Hybrid Premium Style Components

Qty	Component	OEM Reference	North American Interchange No.
1×	Rear Bumper Cover Bare Shell (Upper & Lower Textured Black)	71501-TLA-A00 / 71501-TLY-H00	HO1100282
1×	Premium Hybrid Rear Bumper Lower Valance Protection Skirt (Hybrid Version)	71510-TLA-A10 / 71510-TLY-H11	HO1112111
1×	Rear License Plate Bracket Garnish Holder Base	74895-TLA-A01 / 74895-TLY-H01	HO1044111
1×	Left Rear Bumper Reflector Lamp Assembly (LH)	34550-TLA-A01 / 34550-TLY-H01	HO2830103
1×	Right Rear Bumper Reflector Lamp Assembly (RH)	34500-TLA-A01 / 34500-TLY-H01	HO2831103

Fitment Verification

This kit is designed for compatible North American 2017–2019 Honda CR-V models.

Gasoline Base Style is designed for compatible gasoline-powered models equipped with the corresponding factory rear bumper configuration.
Hybrid Premium Style is designed for compatible hybrid models equipped with the corresponding hybrid rear bumper configuration.

Before ordering, verify your vehicle's powertrain, trim level, and original rear bumper design to ensure the selected kit matches your vehicle. Always test-fit all components before painting or permanent installation. Products that have been painted, installed, damaged, or permanently modified may not qualify for return under the VELNOX Auto Return Policy.

Paint & Installation

The rear bumper cover included in each kit is supplied with a primed finish and requires professional preparation and painting before installation. Professional painting and installation are recommended to help ensure proper alignment, secure fitment, and accurate color matching. Test-fit all components before painting, drilling, cutting, or making any permanent modifications.

FAQS

1. What is included in each kit?

Each kit includes the components listed in the corresponding package table above. Please review the package contents carefully before ordering.

2. What is the difference between the Gasoline Base Style and the Hybrid Premium Style?

The primary difference is the rear lower valance. The Gasoline Base Style includes the standard gasoline rear lower valance, while the Hybrid Premium Style includes the hybrid-specific rear lower valance designed for the factory hybrid rear bumper appearance.

3. How do I choose the correct kit?

Select the kit that matches your vehicle's original rear bumper configuration and powertrain. If you are unsure, compare your vehicle with the product photos or contact VELNOX Auto before ordering.

4. Is the rear bumper cover already painted?

No. The rear bumper cover is supplied in a primed finish and requires professional painting before installation.

5. Should I test-fit the components before painting?

Yes. Always test-fit every component before painting or making permanent modifications to ensure proper fitment and alignment.

100% Fitment Guaranteed for North American 1.5T Gasoline traditional models. Full kit shipped in one oversized heavy-duty box via FedEx Ground with premium safe foam framing.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM assembly. OEM reference numbers, North American interchange numbers, vehicle names, and model names are provided solely for product identification and compatibility-reference purposes. Honda® and CR-V® are registered trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, or endorsed by Honda Motor Co., Ltd.

Low in stock

2020-2023 Nissan Sentra Rear Bumper Cover | Primed

From $167.00 $337.00

-50%

Product Overview

Rear bumper damage can quickly take away from the clean, modern appearance of your Nissan Sentra. Whether the damage was caused by a parking lot incident, a low-speed rear-end collision, loading cargo, or everyday city driving, replacing the bumper cover is an effective way to restore your vehicle's factory-inspired appearance. This 2020-2023 Nissan Sentra Rear Bumper Cover features an OE-style design engineered to complement the original body lines of compatible Sentra models. Finished with a smooth primed surface, it is ready for professional paint preparation and color matching. Once professionally painted and installed, it helps restore the refined rear styling introduced with the latest generation Nissan Sentra. Designed for collision repair, cosmetic restoration, and routine vehicle maintenance, this replacement rear bumper cover provides a practical and cost-effective solution for replacing a cracked, scratched, or damaged bumper.

Designed to Complement the Next-Generation Sentra

The 2020-2023 Nissan Sentra features a redesigned exterior with a lower, wider stance, sculpted body lines, and a more premium compact sedan profile. This OE-style replacement rear bumper cover is engineered to complement the original rear styling while restoring your vehicle after collision damage, parking mishaps, or everyday wear.

Restore Your Sentra's Original Appearance

Replacing a damaged rear bumper cover helps bring back the clean, finished appearance of your vehicle after accident damage or everyday use. Following professional paint preparation and installation, this bumper cover blends naturally with the factory body lines, helping your Sentra maintain its modern, factory-inspired design.

When Should You Replace a Rear Bumper Cover?

Consider replacing your rear bumper cover if you notice:

Cracked or broken bumper plastic
Broken mounting tabs
Deep scratches or heavy scuff marks
Dents caused by parking or rear-end impacts
Paint damage beyond repair
Visible damage affecting your vehicle's appearance

Replacing a damaged bumper cover is often a more practical and cost-effective solution than repairing severely damaged plastic components.

Why Choose an OE-Style Replacement?

OE-style replacement bumper covers are engineered to complement the original body design of compatible vehicles without altering their factory styling. The smooth primed finish provides an excellent foundation for professional paint preparation and color matching, helping restore your vehicle's original appearance.

Primed Surface Ready for Paint

This bumper cover is supplied with a smooth primed finish to simplify the refinishing process.

Benefits include:

Ready for professional paint preparation
Excellent surface for color matching
Smooth, consistent finish
Reduced preparation time before painting
Helps achieve a factory-quality appearance

Professional painting and color matching are recommended before installation.

Common Repair Applications

This rear bumper cover is commonly used for:

Rear-end collision repair
Parking damage restoration
Cosmetic bumper replacement
Insurance claim repairs
Exterior body restoration
Daily driver maintenance
Vehicle reconditioning before resale

Whether you're repairing accident damage or restoring your Sentra's appearance, this replacement rear bumper cover helps complete a professional-quality repair.

Product Features

OE-style rear bumper cover replacement
Precision-molded to complement original body lines
Durable automotive-grade construction
Smooth primed finish ready for paint
Helps restore original rear-end appearance
Designed for collision repair and cosmetic restoration
Suitable for professional body shops and experienced DIY installations

Important Information

This listing includes one primed rear bumper cover only. Reflectors, parking sensors, mounting hardware, brackets, reinforcement bar, trim pieces, camera components, and other accessories are sold separately unless otherwise specified.

FAQS

1. Does this rear bumper cover come painted?

No. This bumper cover is supplied with a smooth primed finish and requires professional painting before installation.

2. What is included with this bumper cover?

This listing includes one primed rear bumper cover only. Reflectors, parking sensors, mounting hardware, brackets, reinforcement bar, trim pieces, camera components, and all other accessories are sold separately unless otherwise specified.

3. Is this an OEM Nissan part?

No. This is an aftermarket replacement rear bumper cover designed for compatible Nissan Sentra applications. It is manufactured to provide an OE-style appearance and fit.

4. Is professional installation recommended?

Yes. Professional installation is recommended to ensure proper fitment, paint preparation, alignment, and a factory-quality finish.

5. Is this bumper cover suitable for collision repair?

Yes. It is commonly used for rear-end collision repairs, insurance claim repairs, cosmetic restoration projects, and everyday body repair work.

6. Can this bumper cover be painted to match my vehicle?

Yes. The primed surface is specifically designed for professional paint preparation and color matching to achieve a seamless factory-inspired finish.

7. Will this rear bumper cover arrive folded?

Some bumper covers may be folded for shipping to reduce shipping costs. The bumper cover will typically return to its original shape after unpacking and standard installation procedures.

Compatibility Disclaimer

Nissan® and Sentra® are registered trademarks of Nissan Motor Co., Ltd. Velnox Auto is not affiliated with, endorsed by, sponsored by, or otherwise connected to Nissan Motor Co., Ltd. Vehicle manufacturer names, model names, trim levels, and model years are used solely for product identification and compatibility purposes. This product is an aftermarket replacement part and is not manufactured, authorized, or approved by Nissan Motor Co., Ltd.

Low in stock

2020-2023 Nissan Sentra Front Bumper Cover | Primed

$167.00 $337.00

-50%

Product Overview

Front-end damage can quickly affect the appearance of your Nissan Sentra, whether it's caused by road debris, a parking lot incident, or a minor collision. Replacing a damaged bumper cover is one of the most effective ways to restore your vehicle's clean, modern appearance while maintaining its factory-inspired styling. This 2020-2023 Nissan Sentra Front Bumper Cover features an OE-style design engineered to complement the original body lines of compatible Sentra models. Finished with a smooth primed surface, it is ready for professional paint preparation and color matching. Once refinished and installed, it helps restore the bold front-end styling introduced with the latest generation Nissan Sentra. Designed for collision repair, cosmetic restoration, and routine vehicle maintenance, this replacement front bumper cover provides a practical and cost-effective solution for replacing a cracked, scratched, or damaged bumper.

Inspired by the Next-Generation Sentra Design

The 2020-2023 Nissan Sentra introduced a completely redesigned exterior featuring Nissan's signature V-Motion grille, lower body profile, and sport-inspired styling. This OE-style replacement front bumper cover is engineered to complement the original design while restoring your vehicle after collision damage, parking incidents, or everyday driving.

Restore Your Sentra's Original Appearance

A replacement front bumper cover helps restore the clean, finished appearance of your vehicle following accident damage or everyday wear. After professional paint preparation and installation, it blends naturally with the original body lines, helping your Sentra maintain its premium compact sedan styling.

When Should You Replace a Front Bumper Cover?

Consider replacing your front bumper cover if you notice:

Cracked or broken bumper plastic
Broken mounting tabs
Deep scratches or heavy scuff marks
Dents caused by collisions or road impacts
Paint damage beyond repair
Visible damage affecting your vehicle's appearance

Replacing a damaged bumper cover is often more practical and cost-effective than repairing severely damaged plastic components.

Why Choose an OE-Style Replacement?

OE-style replacement bumper covers are engineered to complement the original body design of compatible vehicles without altering their factory styling. The smooth primed finish provides an excellent foundation for professional paint preparation and color matching, helping restore your vehicle's original appearance.

Primed Surface Ready for Paint

This bumper cover is supplied with a smooth primed finish to simplify the refinishing process.

Benefits include:

Ready for professional paint preparation
Excellent surface for color matching
Smooth, consistent finish
Reduced preparation time before painting
Helps achieve a factory-quality appearance

Professional painting and color matching are recommended before installation.

Common Repair Applications

This front bumper cover is commonly used for:

Front-end collision repair
Cosmetic bumper replacement
Insurance claim repairs
Exterior body restoration
Daily driver maintenance
Vehicle reconditioning before resale
Professional collision repair projects

Whether you're repairing accident damage or restoring your Sentra's appearance, this replacement bumper cover helps complete a professional-quality repair.

Product Features

OE-style front bumper cover replacement
Precision-molded to complement original body lines
Durable automotive-grade construction
Smooth primed finish ready for paint
Helps restore original front-end appearance
Designed for collision repair and cosmetic restoration
Suitable for professional body shops and experienced DIY installations

Important Information

This listing includes one primed front bumper cover only. Grille, emblem, fog light components, parking sensors, camera components, mounting hardware, brackets, reinforcement bar, trim pieces, and all other accessories are sold separately unless otherwise specified.

FAQS

1. Does this front bumper cover come painted?

No. This bumper cover is supplied with a smooth primed finish and requires professional painting before installation.

2. What is included with this bumper cover?

This listing includes one primed front bumper cover only. Grille, emblem, fog light components, parking sensors, camera components, mounting hardware, brackets, reinforcement bar, trim pieces, and all other accessories are sold separately unless otherwise specified.

3. Is this an OEM Nissan part?

No. This is an aftermarket replacement front bumper cover designed for compatible Nissan Sentra applications. It is manufactured to provide an OE-style appearance and fit.

4. Is professional installation recommended?

Yes. Professional installation is recommended to ensure proper fitment, paint preparation, alignment, and a factory-quality finish.

5. Is this bumper cover suitable for collision repair?

Yes. It is commonly used for collision repairs, insurance claim repairs, cosmetic restoration projects, and everyday body repair work.

6. Can this bumper cover be painted to match my vehicle?

Yes. The primed surface is specifically designed for professional paint preparation and color matching to achieve a seamless factory-inspired finish.

7. Will this front bumper cover arrive folded?

Some bumper covers may be folded for shipping to reduce shipping costs. The bumper cover will typically return to its original shape after unpacking and standard installation procedures.

Compatibility Disclaimer

Nissan® and Sentra® are registered trademarks of Nissan Motor Co., Ltd. Velnox Auto is not affiliated with, endorsed by, sponsored by, or otherwise connected to Nissan Motor Co., Ltd. Vehicle manufacturer names, model names, trim levels, and model years are used solely for product identification and compatibility purposes. This product is an aftermarket replacement part and is not manufactured, authorized, or approved by Nissan Motor Co., Ltd.

Low in stock

2016-2019 Nissan Sentra Rear Bumper Cover | Primed

$167.00 $337.00

-50%

Product Overview

Rear bumper damage can noticeably affect the appearance of your Nissan Sentra, even if the rest of the vehicle remains in excellent condition. Whether the damage was caused by a parking lot accident, a low-speed rear-end collision, loading cargo, or everyday driving, replacing the bumper cover is an effective way to restore your vehicle's clean, factory-inspired appearance. This 2016-2019 Nissan Sentra Rear Bumper Cover features an OE-style design engineered to complement the original body lines of compatible Sentra models. Finished with a smooth primed surface, it is ready for professional paint preparation and color matching. Once painted and installed, it helps restore the clean rear styling that has made the Nissan Sentra a dependable choice for everyday commuting. Designed for collision repair, cosmetic restoration, and routine vehicle maintenance, this replacement rear bumper cover provides a practical and cost-effective solution for replacing a cracked, scratched, or damaged bumper while preserving your vehicle's original appearance.

Inspired by the Original Sentra Design

The Nissan Sentra is designed to deliver practical transportation with modern styling, efficient performance, and everyday comfort. This OE-style replacement rear bumper cover is engineered to complement the original exterior design while helping restore your vehicle after parking damage, collision repairs, or years of daily driving.

Restore Your Sentra's Original Appearance

Replacing a damaged rear bumper cover helps restore the clean, finished appearance of your vehicle after everyday wear or accident damage. Once professionally painted and installed, it blends naturally with the factory body lines, helping your Sentra regain its refined, factory-inspired look.

When Should You Replace a Rear Bumper Cover?

Consider replacing your rear bumper cover if you notice:

Cracked or broken bumper plastic
Broken mounting tabs
Deep scratches or heavy scuff marks
Dents caused by parking or rear-end impacts
Paint damage beyond repair
Visible damage affecting the vehicle's appearance

Replacing a damaged bumper cover is often more practical and cost-effective than repairing severely damaged plastic components.

Why Choose an OE-Style Replacement?

OE-style replacement bumper covers are engineered to complement the original body design of compatible vehicles without changing their factory styling. The smooth primed finish provides an excellent surface for professional paint preparation and color matching, helping restore your vehicle's original appearance.

Primed Surface Ready for Paint

This bumper cover is supplied with a smooth primed finish to simplify the refinishing process. Benefits include:

Ready for professional paint preparation
Excellent surface for color matching
Smooth, consistent finish
Reduced preparation time before painting
Helps achieve a factory-quality appearance

Professional painting and color matching are recommended before installation.

Common Repair Applications

This rear bumper cover is commonly used for:

Rear-end collision repair
Parking damage restoration
Cosmetic bumper replacement
Insurance claim repairs
Exterior body restoration
Daily driver maintenance
Vehicle reconditioning before resale

Whether you're repairing accident damage or refreshing your Sentra's appearance, this replacement rear bumper cover helps complete a professional-quality repair.

Product Features

OE-style rear bumper cover replacement
Precision-molded to complement original body lines
Durable automotive-grade construction
Smooth primed finish ready for paint
Helps restore original rear-end appearance
Designed for collision repair and cosmetic restoration
Suitable for professional body shops and experienced DIY installations

Important Information

This listing includes one primed rear bumper cover only. Reflectors, parking sensors, mounting hardware, brackets, reinforcement bar, trim pieces, and other accessories are sold separately unless otherwise specified.

FAQS

1. Does this rear bumper cover come painted?

No. This bumper cover is supplied with a smooth primed finish and requires professional painting before installation.

2. What is included with this bumper cover?

This listing includes one primed rear bumper cover only. Reflectors, parking sensors, mounting hardware, brackets, reinforcement bar, trim pieces, and other accessories are sold separately unless otherwise specified.

3. Is this an OEM Nissan part?

No. This is an aftermarket replacement rear bumper cover designed for compatible Nissan Sentra applications. It is manufactured to provide an OE-style appearance and fit.

4. Is professional installation recommended?

Yes. Professional installation is recommended to ensure proper fitment, paint preparation, alignment, and a factory-quality finish.

5. Is this bumper cover suitable for collision repair?

Yes. It is commonly used for rear-end collision repairs, cosmetic restoration, insurance claim repairs, and everyday body repair work.

6. Can this bumper cover be painted to match my vehicle?

Yes. The primed surface is specifically designed for professional paint preparation and color matching to achieve a seamless factory-inspired finish.

7. Will this rear bumper cover arrive folded?

Some bumper covers may be folded for shipping to reduce shipping costs. The bumper cover will typically return to its original shape after unpacking and standard installation procedures.

Compatibility Disclaimer

Nissan® and Sentra® are registered trademarks of Nissan Motor Co., Ltd. Velnox Auto is not affiliated with, endorsed by, sponsored by, or otherwise connected to Nissan Motor Co., Ltd. Vehicle manufacturer names, model names, trim levels, and model years are used solely for product identification and compatibility purposes. This product is an aftermarket replacement part and is not manufactured, authorized, or approved by Nissan Motor Co., Ltd.

Low in stock

2016-2019 Nissan Sentra Front Bumper Cover | Primed

$167.00 $337.00

-50%

Product Overview

Front-end damage can quickly affect the appearance of your Nissan Sentra, even after a relatively minor accident. Whether your bumper has been damaged by road debris, a parking lot incident, or everyday driving, replacing the bumper cover is one of the most effective ways to restore your vehicle's clean, factory-inspired appearance. This 2016-2019 Nissan Sentra Front Bumper Cover features an OE-style design engineered to complement the original body lines of compatible Sentra models. Finished with a smooth primed surface, it is ready for professional paint preparation and color matching. Once painted and installed, it helps restore the clean, contemporary front-end styling that has made the Nissan Sentra a popular choice for everyday commuting. Designed for collision repair, cosmetic restoration, and routine vehicle maintenance, this replacement front bumper cover provides a practical and cost-effective solution for replacing a cracked, scratched, or damaged bumper while maintaining your vehicle's original appearance.

Inspired by the Original Sentra Design

The Nissan Sentra combines a compact footprint with modern styling, excellent everyday practicality, and comfortable driving dynamics. This OE-style replacement front bumper cover is designed to complement the original exterior design while helping restore your vehicle after collision damage, parking incidents, or years of daily use.

Restore Your Sentra's Original Appearance

A replacement front bumper cover helps restore the clean, finished appearance of your vehicle after accident damage. Once professionally painted and installed, it blends naturally with the factory body lines, helping your Sentra regain its refined, factory-inspired look.

When Should You Replace a Front Bumper Cover?

Consider replacing your front bumper cover if you notice:

Cracked or broken bumper plastic
Broken mounting tabs
Deep scratches or heavy scuff marks
Dents caused by minor collisions
Paint damage beyond repair
Visible damage affecting the vehicle's appearance

Replacing a damaged bumper cover is often more practical and cost-effective than repairing severely damaged plastic components.

Why Choose an OE-Style Replacement?

OE-style replacement bumper covers are engineered to complement the original body design of compatible vehicles without changing their factory styling. The smooth primed finish provides an excellent surface for professional paint preparation and color matching, helping restore your vehicle's original appearance.

Primed Surface Ready for Paint

This bumper cover is supplied with a smooth primed finish to simplify the refinishing process.

Benefits include:

Ready for professional paint preparation
Excellent surface for color matching
Smooth, consistent finish
Reduced preparation time before painting
Helps achieve a factory-quality appearance

Professional painting and color matching are recommended before installation.

Common Repair Applications

This front bumper cover is commonly used for:

Front-end collision repair
Cosmetic bumper replacement
Insurance claim repairs
Exterior body restoration
Daily driver maintenance
Vehicle reconditioning before resale
Professional collision repair projects

Whether you're repairing accident damage or refreshing your Sentra's appearance, this replacement bumper cover helps complete a professional-quality repair.

Product Features

OE-style front bumper cover replacement
Precision-molded to complement original body lines
Durable automotive-grade construction
Smooth primed finish ready for paint
Helps restore original front-end appearance
Designed for collision repair and cosmetic restoration
Suitable for professional body shops and experienced DIY installations

Important Information

This listing includes one primed front bumper cover only. Grille, emblem, fog light components, parking sensors, mounting hardware, brackets, reinforcement bar, and other accessories are sold separately unless otherwise specified.

FAQS

1. Does this front bumper cover come painted?

No. This bumper cover is supplied with a smooth primed finish and requires professional painting before installation.

2. What is included with this bumper cover?

This listing includes one primed front bumper cover only. Grille, emblem, fog light components, parking sensors, mounting hardware, brackets, reinforcement bar, trim pieces, and other accessories are sold separately unless otherwise specified.

3. Is this an OEM Nissan part?

No. This is an aftermarket replacement front bumper cover designed for compatible Nissan Sentra applications. It is manufactured to provide an OE-style appearance and fit.

4. Is professional installation recommended?

Yes. Professional installation is recommended to ensure proper fitment, paint preparation, alignment, and a factory-quality finish.

5. Is this bumper cover suitable for collision repair?

Yes. It is commonly used for collision repairs, cosmetic restoration, insurance claim repairs, and everyday body repair work.

6. Can this bumper cover be painted to match my vehicle?

Yes. The primed surface is specifically designed for professional paint preparation and color matching to achieve a seamless factory-inspired finish.

7. Will this front bumper cover arrive folded?

Some bumper covers may be folded for shipping to reduce shipping costs. The bumper cover will typically return to its original shape after unpacking and standard installation procedures.

Compatibility Disclaimer

Nissan® and Sentra® are registered trademarks of Nissan Motor Co., Ltd. Velnox Auto is not affiliated with, endorsed by, sponsored by, or otherwise connected to Nissan Motor Co., Ltd. Vehicle manufacturer names, model names, trim levels, and model years are used solely for product identification and compatibility purposes. This product is an aftermarket replacement part and is not manufactured, authorized, or approved by Nissan Motor Co., Ltd.

Low in stock

2021-2023 Nissan Rogue Rear Bumper Cover | Primed

$167.00 $337.00

-50%

Product Overview

Rear bumper damage can quickly diminish the clean, modern appearance of your Nissan Rogue. Whether the damage resulted from a parking lot incident, a low-speed rear-end collision, loading cargo, or everyday driving, replacing the bumper cover is an effective way to restore your SUV's factory-inspired exterior. This 2021-2023 Nissan Rogue Rear Bumper Cover features an OE-style design that complements the original body lines of compatible Rogue models. Finished with a smooth primed surface, it is ready for professional paint preparation and color matching. Once painted and installed, it helps restore the contemporary rear styling introduced with the latest generation Nissan Rogue. Designed for collision repair, cosmetic restoration, and everyday vehicle maintenance, this replacement rear bumper cover provides a practical and cost-effective solution for replacing a cracked, scratched, or damaged bumper.

Built to Complement Nissan's Latest SUV Design

The latest-generation Nissan Rogue features a more refined exterior with sculpted body lines, a wider stance, and a contemporary SUV profile. This OE-style replacement rear bumper cover is engineered to complement the original rear styling while helping restore your vehicle after collision damage, parking mishaps, or everyday wear.

Restore Your Rogue's Original Appearance

Replacing a damaged rear bumper cover helps bring back the clean, finished appearance of your vehicle while completing professional collision repairs or exterior restoration projects. After proper paint preparation and installation, this bumper cover blends naturally with the original body design, helping your Rogue maintain its modern factory-inspired look.

When Should You Replace a Rear Bumper Cover?

Consider replacing your rear bumper cover if you notice:

Cracked or broken bumper plastic
Broken mounting tabs
Deep scratches or heavy scuff marks
Dents caused by parking or rear-end impacts
Paint damage beyond repair
Visible collision damage affecting the rear bumper

Replacing a damaged bumper cover is often a more practical and cost-effective solution than repairing severely damaged plastic components.

Why Choose an OE-Style Replacement?

OE-style replacement bumper covers are engineered to complement the original body design of compatible vehicles without changing their factory styling. The smooth primed finish provides an excellent surface for professional paint preparation and color matching, helping restore your vehicle's original appearance.

Primed Surface Ready for Paint

This bumper cover is supplied with a smooth primed finish to simplify the refinishing process.

Benefits include:

Ready for professional paint preparation
Excellent surface for color matching
Smooth, consistent finish
Reduced preparation time before painting
Helps achieve a factory-quality appearance

Professional painting and color matching are recommended before installation.

Common Repair Applications

This rear bumper cover is commonly used for:

Rear-end collision repair
Parking damage restoration
Cosmetic bumper replacement
Insurance claim repairs
Exterior body restoration
Daily driver maintenance
Vehicle reconditioning before resale

Whether you're repairing accident damage or restoring your Rogue's appearance, this replacement rear bumper cover helps complete a professional-quality repair.

Product Features

OE-style rear bumper cover replacement
Precision-molded to complement original body lines
Durable automotive-grade construction
Smooth primed finish ready for paint
Helps restore original rear-end appearance
Designed for collision repair and cosmetic restoration
Suitable for professional body shops and experienced DIY installations

Important Information

This listing includes one primed rear bumper cover only. Reflectors, parking sensors, camera components, mounting hardware, brackets, reinforcement bars, trim pieces, and all other accessories are sold separately unless otherwise specified.

FAQS

1. Does this rear bumper cover come painted?

No. This bumper cover is supplied with a smooth primed finish and requires professional painting before installation.

2. What is included with this bumper cover?

This listing includes one primed rear bumper cover only. Reflectors, parking sensors, camera components, mounting hardware, brackets, reinforcement bars, trim pieces, and all other accessories are sold separately unless otherwise specified.

3. Is this an OEM Nissan part?

No. This is an aftermarket replacement rear bumper cover designed for compatible Nissan Rogue applications. It is manufactured to provide an OE-style appearance and fit.

4. Is professional installation recommended?

Yes. Professional installation is recommended to ensure proper alignment, paint preparation, and a factory-quality finish.

5. Can this bumper cover be used for collision repair?

Yes. It is commonly used for rear-end collision repairs, cosmetic restoration projects, insurance claim repairs, and everyday body repair work.

6. Can this bumper cover be painted to match my vehicle?

Yes. The primed surface is specifically designed for professional paint preparation and color matching to achieve a seamless factory-inspired finish.

7. Will this rear bumper cover arrive folded?

Some bumper covers may be folded for shipping to reduce shipping costs. The bumper cover will typically return to its original shape after unpacking and standard installation procedures.

Compatibility Disclaimer

Nissan® and Rogue® are registered trademarks of Nissan Motor Co., Ltd. Velnox Auto is not affiliated with, endorsed by, sponsored by, or otherwise connected to Nissan Motor Co., Ltd. Vehicle manufacturer names, model names, trim levels, and model years are used solely for product identification and compatibility purposes. This product is an aftermarket replacement part and is not manufactured, authorized, or approved by Nissan Motor Co., Ltd.

Low in stock

2021-2023 Nissan Rogue Front Bumper Cover | Primed

$167.00 $337.00

-50%

Product Overview

Front-end damage can quickly change the appearance of your Nissan Rogue, even after a relatively minor accident. Whether your bumper has been affected by road debris, a parking lot incident, or everyday driving, replacing a damaged bumper cover is an effective way to restore your vehicle's clean, modern appearance. This 2021-2023 Nissan Rogue Front Bumper Cover features an OE-style design engineered to complement the original body lines of compatible Rogue models. Finished with a smooth primed surface, it is ready for professional paint preparation and color matching. Once refinished and installed, it helps restore the bold front-end styling introduced with the latest generation Nissan Rogue. Designed for collision repair, cosmetic restoration, and routine vehicle maintenance, this replacement front bumper cover offers a practical and cost-effective solution for restoring your SUV's factory-inspired appearance.

Inspired by Nissan's Latest SUV Design

The 2021-2023 Nissan Rogue introduced a completely redesigned exterior featuring a wider V-Motion grille, sculpted body lines, and a more premium SUV appearance. This OE-style replacement front bumper cover is designed to complement those original styling elements while restoring your vehicle after collision damage or everyday wear.

Restore Your Rogue's Original Appearance

A replacement front bumper cover helps restore the clean, finished appearance of your vehicle after accident damage. Following professional paint preparation and installation, it blends naturally with the original exterior, helping your Rogue maintain the bold styling of the latest generation model.

When Should You Replace a Front Bumper Cover?

Consider replacing your front bumper cover if you notice:

Cracked or broken bumper plastic
Broken mounting tabs
Deep scratches or heavy scuff marks
Collision-related dents
Paint damage beyond repair
Visible damage affecting your vehicle's appearance

Replacing a damaged bumper cover is often a more practical and cost-effective solution than repairing severely damaged plastic components.

Why Choose an OE-Style Replacement?

OE-style replacement bumper covers are designed to complement the original body design of compatible vehicles without altering their factory styling. The smooth primed finish provides an excellent foundation for professional paint preparation and color matching, helping restore your vehicle's original appearance.

Primed Surface Ready for Paint

This bumper cover is supplied with a smooth primed finish to simplify the refinishing process.

Benefits include:

Ready for professional paint preparation
Excellent surface for color matching
Smooth, consistent finish
Reduced preparation time before painting
Helps achieve a factory-quality appearance

Professional painting and color matching are recommended before installation.

Common Repair Applications

This front bumper cover is commonly used for:

Front-end collision repair
Cosmetic bumper replacement
Insurance claim repairs
Exterior body restoration
Daily driver maintenance
Vehicle reconditioning before resale
Professional collision repair projects

Whether you're repairing accident damage or restoring your Rogue's appearance, this replacement bumper cover helps complete a professional-quality repair.

Product Features

OE-style front bumper cover replacement
Precision-molded to complement original body lines
Durable automotive-grade construction
Smooth primed finish ready for paint
Helps restore original front-end appearance
Designed for collision repair and cosmetic restoration
Suitable for professional body shops and experienced DIY installations

Important Information

This listing includes one primed front bumper cover only. Grilles, emblems, fog light components, parking sensors, camera systems, mounting hardware, brackets, reinforcement bars, and all other accessories are sold separately unless otherwise specified.

FAQS

1. Does this front bumper cover come painted?

No. This bumper cover is supplied with a smooth primed finish and requires professional painting before installation.

2. What is included with this bumper cover?

This listing includes one primed front bumper cover only. Grilles, emblems, fog light components, parking sensors, camera systems, mounting hardware, brackets, reinforcement bars, trim pieces, and all other accessories are sold separately unless otherwise specified.

3. Is this an OEM Nissan part?

No. This is an aftermarket replacement front bumper cover designed for compatible Nissan Rogue applications. It is manufactured to provide an OE-style appearance and fit.

4. Is professional installation recommended?

Yes. Professional installation is recommended to help ensure proper alignment, paint preparation, and a factory-quality finish.

5. Is this bumper cover suitable for collision repair?

Yes. It is commonly used for collision repairs, cosmetic restoration, insurance claim repairs, and everyday body repair work.

6. Can this bumper cover be painted to match my vehicle?

Yes. The primed surface is specifically designed for professional paint preparation and color matching to achieve a seamless factory-inspired finish.

7. Will this front bumper cover arrive folded?

Some bumper covers may be folded for shipping to reduce shipping costs. The bumper cover will typically return to its original shape after unpacking and standard installation procedures.

Compatibility Disclaimer

Nissan® and Rogue® are registered trademarks of Nissan Motor Co., Ltd. Velnox Auto is not affiliated with, endorsed by, sponsored by, or otherwise connected to Nissan Motor Co., Ltd. Vehicle manufacturer names, model names, trim levels, and model years are used solely for product identification and compatibility purposes. This product is an aftermarket replacement part and is not manufactured, authorized, or approved by Nissan Motor Co., Ltd.

Low in stock

2014-2016 Nissan Rogue Rear Bumper Cover | Primed

$167.00 $337.00

-50%

Product Overview

A damaged rear bumper can noticeably affect the appearance of your Nissan Rogue. Whether the damage resulted from a parking lot incident, a low-speed rear-end collision, loading cargo, or everyday driving, replacing the bumper cover is one of the most effective ways to restore your vehicle's clean exterior appearance. This 2014-2016 Nissan Rogue Rear Bumper Cover features an OE-style design that follows the original body lines of compatible Rogue models. Finished with a smooth primed surface, it is ready for professional paint preparation and color matching. Once painted and installed, it helps restore the modern rear styling introduced with the second-generation Nissan Rogue. Designed for collision repair, cosmetic restoration, and everyday vehicle maintenance, this replacement rear bumper cover provides a practical and cost-effective solution for replacing a cracked, scratched, or damaged bumper while maintaining your vehicle's factory-inspired appearance.

Built to Match the Original Rogue Design

The second-generation Nissan Rogue introduced a more aerodynamic exterior, refined body lines, and improved everyday practicality for drivers and families alike. This OE-style replacement rear bumper cover is designed to complement the original rear styling while helping restore your vehicle after accident damage, parking mishaps, or years of everyday use.

Restore Your Rogue's Original Appearance

A replacement rear bumper cover can dramatically improve the appearance of your Rogue while helping complete professional collision repairs or exterior restoration projects. After professional paint preparation and installation, it blends naturally with the original body design, helping restore the clean, factory-inspired look of your vehicle.

When Should You Replace a Rear Bumper Cover?

Consider replacing your rear bumper cover if you notice:

Cracked or broken bumper plastic
Broken mounting tabs
Deep scratches or heavy scuff marks
Dents caused by parking or rear-end impacts
Paint damage that cannot be refinished
Visible collision damage affecting the rear bumper

Replacing a damaged bumper cover is often a more practical and cost-effective solution than repairing severely damaged plastic components.

Why Choose an OE-Style Replacement?

OE-style replacement bumper covers are engineered to complement the original body design of compatible vehicles. The smooth primed finish provides an excellent foundation for professional paint preparation, helping achieve a seamless color match while restoring your vehicle's original appearance.

Primed Surface Ready for Paint

This bumper cover is supplied with a smooth primed finish to simplify the refinishing process.

Benefits include:

Ready for professional paint preparation
Excellent surface for color matching
Smooth, consistent finish
Reduced preparation time before painting
Helps achieve a factory-quality appearance

Professional painting and color matching are recommended before installation.

Common Repair Applications

This rear bumper cover is commonly used for:

Rear-end collision repair
Parking damage restoration
Cosmetic bumper replacement
Insurance claim repairs
Exterior body restoration
Daily driver maintenance
Vehicle reconditioning before resale

Whether you're repairing accident damage or refreshing your Rogue's appearance, this replacement rear bumper cover helps complete a professional-quality repair.

Product Features

OE-style rear bumper cover replacement
Precision-molded to complement original body lines
Durable automotive-grade construction
Smooth primed finish ready for paint
Helps restore original rear-end appearance
Designed for collision repair and cosmetic restoration
Suitable for professional body shops and experienced DIY installations

Important Information

This listing includes one primed rear bumper cover only. Reflectors, parking sensors, mounting hardware, brackets, reinforcement components, trim pieces, and other accessories are sold separately unless otherwise specified.

FAQS

1. Does this rear bumper cover come painted?

No. This bumper cover is supplied with a smooth primed finish and requires professional painting before installation.

2. What is included with this bumper cover?

This listing includes one primed rear bumper cover only. Reflectors, parking sensors, mounting hardware, brackets, reinforcement bars, trim pieces, and all other accessories are sold separately unless otherwise specified.

3. Is this an OEM Nissan part?

No. This is an aftermarket replacement rear bumper cover designed for compatible Nissan Rogue applications. It is manufactured to provide an OE-style appearance and fit.

4. Is professional installation recommended?

Yes. Professional installation is recommended to ensure proper alignment, paint preparation, and a factory-quality finish.

5. Can this bumper cover be used for collision repair?

Yes. It is commonly used for rear-end collision repairs, cosmetic restoration projects, insurance claim repairs, and everyday body repair work.

6. Can this bumper cover be painted to match my vehicle?

Yes. The primed surface is specifically designed for professional paint preparation and color matching to achieve a seamless factory-inspired finish.

7. Will this rear bumper cover arrive folded?

Some bumper covers may be folded for shipping to reduce shipping costs. The bumper cover will typically return to its original shape after unpacking and standard installation procedures.

Compatibility Disclaimer

Nissan® and Rogue® are registered trademarks of Nissan Motor Co., Ltd. Velnox Auto is not affiliated with, endorsed by, sponsored by, or otherwise connected to Nissan Motor Co., Ltd. Vehicle manufacturer names, model names, trim levels, and model years are used solely for product identification and compatibility purposes. This product is an aftermarket replacement part and is not manufactured, authorized, or approved by Nissan Motor Co., Ltd.

Low in stock

2014-2016 Nissan Rogue Front Bumper Cover | Primed

$167.00 $337.00

-50%

Product Overview

A damaged front bumper can significantly affect the appearance of your Nissan Rogue. Whether the damage was caused by road debris, a parking lot incident, or a minor collision, replacing the bumper cover is one of the most effective ways to restore your vehicle's clean exterior appearance. This 2014-2016 Nissan Rogue Front Bumper Cover features an OE-style design that complements the original body lines of compatible Rogue models. Finished with a smooth primed surface, it is ready for professional paint preparation and color matching. Once painted and installed, it helps restore the modern front-end styling introduced with the second-generation Nissan Rogue. Designed for collision repair, cosmetic restoration, and everyday vehicle maintenance, this replacement front bumper cover offers a practical and cost-effective solution for replacing a cracked, scratched, or damaged bumper.

Designed Around the Original Rogue Styling

The second-generation Nissan Rogue features aerodynamic body lines, a modern SUV profile, and a practical design built for everyday driving. This OE-style replacement front bumper cover is designed to complement the original exterior styling while restoring your Rogue after collision damage, parking incidents, or everyday wear.

Restore the Original Appearance

Replacing a damaged bumper cover helps restore the clean, finished appearance of your vehicle while completing professional collision repairs or exterior restoration projects. After proper paint preparation and installation, this bumper cover blends naturally with the original body design, helping your Rogue regain its factory-inspired appearance.

When Should You Replace a Front Bumper Cover?

Consider replacing your front bumper cover if you notice:

Cracks or broken plastic
Broken mounting tabs
Deep scratches or gouges
Large dents from minor collisions
Paint damage that cannot be repaired
Visible impact damage affecting the bumper's appearance

Replacing a damaged bumper cover is often more practical and economical than repairing severely damaged plastic components.

Why Choose an OE-Style Replacement?

OE-style replacement bumper covers are designed to complement the original body design of compatible vehicles. The smooth primed surface provides an ideal foundation for professional paint preparation and color matching, helping achieve a seamless finish that restores your vehicle's original appearance.

Primed Surface Ready for Paint

This bumper cover arrives with a smooth primed finish to simplify the refinishing process.

Benefits include:

Easier paint preparation
Professional color matching
Consistent surface quality
Reduced preparation time before painting
Smooth foundation for a factory-quality finish

Professional painting and color matching are recommended before installation.

Common Repair Applications

This front bumper cover is commonly used for:

Front-end collision repair
Cosmetic bumper replacement
Insurance claim repairs
Exterior body repair projects
Vehicle restoration
Daily driver maintenance
Vehicle reconditioning before resale

Whether you're repairing accident damage or restoring your Rogue's appearance, this replacement bumper cover helps complete a professional-quality repair.

Product Features

OE-style front bumper cover replacement
Precision-molded to complement original body lines
Durable automotive-grade construction
Smooth primed finish ready for paint
Helps restore original exterior appearance
Designed for collision repair and restoration
Suitable for professional body shops and experienced DIY installations

Important Information

This listing includes one primed front bumper cover only. Grilles, emblems, fog lights, parking sensors, mounting hardware, brackets, reinforcement components, and other accessories are sold separately unless otherwise specified.

FAQS

1. Does this front bumper cover come painted?

No. This bumper cover is supplied in a smooth primed finish and requires professional painting before installation.

2. What is included with this bumper cover?

This listing includes one primed front bumper cover only. Grilles, emblems, fog lights, parking sensors, mounting hardware, brackets, reinforcement bars, trim pieces, and other accessories are sold separately unless otherwise specified.

3. Is this an OEM Nissan part?

No. This is an aftermarket replacement front bumper cover designed for compatible Nissan Rogue applications. It is manufactured to provide an OE-style appearance and fit.

4. Is professional installation recommended?

Yes. Professional installation is recommended to ensure proper fitment, paint preparation, alignment, and a factory-quality finish.

5. Can this bumper cover be used for collision repair?

Yes. This bumper cover is commonly used for collision repairs, insurance claim repairs, cosmetic restoration projects, and everyday body repair work.

6. Can this bumper cover be painted to match my vehicle?

Yes. The primed surface is specifically designed for professional paint preparation and color matching to achieve a seamless factory-inspired appearance.

7. Will this front bumper cover arrive folded?

Some bumper covers may be folded for shipping to reduce shipping costs. The bumper cover will typically return to its original shape after unpacking and standard installation procedures.

Compatibility Disclaimer

Nissan® and Rogue® are registered trademarks of Nissan Motor Co., Ltd. Velnox Auto is not affiliated with, endorsed by, sponsored by, or otherwise connected to Nissan Motor Co., Ltd. Vehicle manufacturer names, model names, trim levels, and model years are used solely for product identification and compatibility purposes. This product is an aftermarket replacement part and is not manufactured, authorized, or approved by Nissan Motor Co., Ltd.

Low in stock

2017-2019 Nissan Rogue Rear Bumper Cover | Primed

$167.00 $337.00

-50%

Product Overview

A damaged rear bumper can significantly affect the appearance of your Nissan Rogue. Whether the damage was caused by a parking lot accident, a low-speed rear-end collision, loading cargo, or everyday driving, replacing the bumper cover is one of the most effective ways to restore your vehicle's clean exterior appearance. This 2017-2019 Nissan Rogue Rear Bumper Cover features an OE-style design that complements the original body lines of compatible Rogue models. Finished with a smooth primed surface, it is ready for professional paint preparation and color matching. Once painted and installed, it helps restore the bold rear styling that has made the Nissan Rogue one of America's most popular compact SUVs. Designed for collision repair, cosmetic restoration, and everyday vehicle maintenance, this replacement rear bumper cover offers a practical and cost-effective solution for replacing a cracked, scratched, or damaged bumper.

Designed Around the Original Rogue Styling

The Nissan Rogue is recognized for its modern SUV styling, spacious interior, and everyday versatility, making it a popular choice for families, commuters, and weekend travelers. This OE-style replacement rear bumper cover is designed to complement the original exterior styling while restoring your Rogue after collision damage, parking incidents, or everyday wear.

Restore the Original Appearance

Replacing a damaged rear bumper cover helps restore the clean, finished appearance of your vehicle while completing professional collision repairs or exterior restoration projects. After proper paint preparation and installation, this bumper cover blends naturally with the original body design, helping your Rogue regain its factory-inspired appearance.

When Should You Replace a Rear Bumper Cover?

Consider replacing your rear bumper cover if you notice:

Cracks or broken plastic
Broken mounting tabs
Deep scratches or gouges
Dents caused by parking or rear-end impacts
Paint damage that cannot be repaired
Visible impact damage affecting the bumper's appearance

Replacing a damaged bumper cover is often more practical and economical than repairing severely damaged plastic components.

Why Choose an OE-Style Replacement?

OE-style replacement bumper covers are designed to complement the original body design of compatible vehicles. The smooth primed surface provides an ideal foundation for professional paint preparation and color matching, helping achieve a seamless finish that restores your vehicle's original appearance.

Primed Surface Ready for Paint

This bumper cover arrives with a smooth primed finish to simplify the refinishing process.

Benefits include:

Easier paint preparation
Professional color matching
Consistent surface quality
Reduced preparation time before painting
Smooth foundation for a factory-quality finish

Professional painting and color matching are recommended before installation.

Common Repair Applications

This rear bumper cover is commonly used for:

Rear-end collision repair
Parking damage restoration
Cosmetic bumper replacement
Insurance claim repairs
Exterior body repair projects
Vehicle restoration
Daily driver maintenance
Vehicle reconditioning before resale

Whether you're repairing accident damage or restoring your Rogue's appearance, this replacement rear bumper cover helps complete a professional-quality repair.

Product Features

OE-style rear bumper cover replacement
Precision-molded to complement original body lines
Durable automotive-grade construction
Smooth primed finish ready for paint
Helps restore original exterior appearance
Designed for collision repair and restoration
Suitable for professional body shops and experienced DIY installations

Important Information

This listing includes one primed rear bumper cover only. Reflectors, parking sensors, mounting hardware, brackets, reinforcement components, trim pieces, and other accessories are sold separately unless otherwise specified.

FAQS

1. Does this rear bumper cover come painted?

No. This bumper cover is supplied in a smooth primed finish and requires professional painting before installation.

2. What is included with this bumper cover?

This listing includes one primed rear bumper cover only. Reflectors, parking sensors, mounting hardware, brackets, reinforcement bars, trim pieces, and other accessories are sold separately unless otherwise specified.

3. Is this an OEM Nissan part?

No. This is an aftermarket replacement rear bumper cover designed for compatible Nissan Rogue applications. It is manufactured to provide an OE-style appearance and fit.

4. Is professional installation recommended?

Yes. Professional installation is recommended to ensure proper fitment, paint preparation, alignment, and a factory-quality finish.

5. Can this bumper cover be used for collision repair?

Yes. This bumper cover is commonly used for rear-end collision repairs, insurance claim repairs, cosmetic restoration projects, and everyday body repair work.

6. Can this bumper cover be painted to match my vehicle?

Yes. The primed surface is specifically designed for professional paint preparation and color matching to achieve a seamless factory-inspired appearance.

7. Will this rear bumper cover arrive folded?

Some bumper covers may be folded for shipping to reduce shipping costs. The bumper cover will typically return to its original shape after unpacking and standard installation procedures.

Compatibility Disclaimer

Nissan® and Rogue® are registered trademarks of Nissan Motor Co., Ltd. Velnox Auto is not affiliated with, endorsed by, sponsored by, or otherwise connected to Nissan Motor Co., Ltd. Vehicle manufacturer names, model names, trim levels, and model years are used solely for product identification and compatibility purposes. This product is an aftermarket replacement part and is not manufactured, authorized, or approved by Nissan Motor Co., Ltd.

Low in stock

Main menu

Drawer menu

Product Comparison

Replacement Parts

Replacement Parts

(+1) 800-635-8611

Main menu

Drawer menu

Replacement Parts

Top Picks in Related Collections

Replacement Parts