Replacement Parts

Product Overview

Restore major front-end components with this Front Bumper Structural Restoration Bundle Kit, designed as an OE-style aftermarket solution for collision repair and front-end rebuilding. The package combines the main bumper fascia with structural reinforcement, lower protection panels, mounting supports, license-plate bracket, and facelift-style fog-light bezels in one coordinated restoration bundle.

Package Includes

Product Highlights

• Comprehensive front-end collision restoration package

• Includes both exterior and structural bumper components

• OE-style contours and compatible mounting locations

• Heavy-duty steel bumper reinforcement beam

• Includes lower bumper and underbody protection panels

• Includes LH & RH bumper mounting supports

• Includes LH & RH facelift-style fog-light bezels

• Designed to simplify multi-component front-end repairs

Important Component Notice

This package includes only the components specifically listed in the Package Includes table. Items such as the upper grille assembly, center grille inserts, fog lamps, lighting wiring, emblem, sensors, absorber foam, and additional mounting hardware are not included unless specifically stated. Compatible original components may be transferred from the existing bumper assembly when applicable.

Paint & Installation Notice

The front bumper cover is supplied primed and unpainted and requires professional surface preparation, color matching, and final paint before installation. Always test fit the bumper cover and all related components before painting, drilling, cutting, or permanent modification. Because this package includes structural and underbody components, professional installation is strongly recommended. Previous collision damage, distorted mounting points, damaged brackets, or frame alignment issues should be inspected and corrected before installation. Painted, installed, drilled, cut, damaged, or permanently modified products may not qualify for return under the VELNOX Auto Return Policy.

Folded Shipping & Unboxing Notice

Due to the flexible construction of the bumper cover, the fascia may be professionally folded and securely packed inside a reinforced shipping carton to help reduce oversized-carrier shipping costs. Temporary bends, waves, creases, or packaging impressions may appear after unpacking and do not necessarily indicate permanent damage.

After unpacking:

1. Remove all protective packaging.

2. Place the bumper cover in a warm, clean area.

3. Allow sufficient time for the panel to recover its molded shape.

4. Apply low, controlled heat gradually and evenly only if necessary.

5. Confirm proper shape and alignment before paint preparation or installation.

Avoid concentrated direct heat, open flame, or overheating, as excessive heat may damage the primer or permanently deform the bumper cover.

Before Ordering

Compare the Partslink / interchange numbers, OEM reference numbers, component design, and mounting locations with the original vehicle components before purchase. Pay particular attention to the bumper cover design, fog-light bezel opening style, lower protection panels, and mounting support locations.

Compatibility Disclaimer

This product is an aftermarket replacement and appearance-upgrade component and is not manufactured or supplied by Honda Motor Co., Ltd. OEM reference numbers, North American interchange numbers, vehicle names, trim names and body-style descriptions are provided solely for identification and compatibility verification. Their use does not indicate that this product is a genuine Honda OEM part. Honda®, Civic® and related trademarks are the property of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, endorsed by or authorized by Honda Motor Co., Ltd.

Product Overview

Restore a damaged rear end with this OE-style Rear Bumper Cover Fascia Bare Shell, designed as a standalone aftermarket replacement for compatible post-facelift Honda Civic Coupe applications using the matching Sport / Si-style rear fascia configuration. Constructed from flexible automotive-grade plastic, the panel follows the original-style rear body contour and compatible mounting layout.

Package Includes

This listing includes the rear bumper fascia main shell only.

The following components are NOT included:

• Center exhaust valance / diffuser

• Rear reflectors or related lighting components

• Side retainers, brackets, clips, or installation hardware

• Additional rear bumper trim unless specifically stated

Compatible original components may be reused when applicable.

Paint & Installation Notice

The bumper cover is supplied primed and unpainted and requires professional surface preparation, color matching, and final paint before installation. Always test fit before painting, drilling, cutting, or permanent modification to verify panel alignment and mounting points. Previous collision damage, worn retainers, damaged brackets, or distorted mounting areas may affect installation and should be inspected before fitting the replacement panel. Professional body-shop preparation and installation are recommended. Painted, installed, drilled, cut, damaged, or permanently modified products may not qualify for return under the VELNOX Auto Return Policy.

Folded Shipping & Unboxing Notice

Because of its flexible construction, the bumper cover may be professionally folded and securely packed inside a reinforced shipping carton to help reduce oversized-carrier shipping costs. Temporary bends, waves, creases, or packaging impressions may appear after unpacking and do not necessarily indicate permanent damage.

After unpacking:

1. Remove all protective packaging.

2. Place the bumper cover in a warm, clean area.

3. Allow sufficient time for the panel to recover its molded shape.

4. Apply low, controlled heat gradually and evenly only if necessary.

5. Confirm shape recovery before test fitting and paint preparation.

Avoid concentrated direct heat, open flame, or overheating, as excessive heat may damage the primer or permanently deform the panel.

Before Ordering

Compare Partslink HO1100312, OEM 04715-TBG-A00ZZ, the rear fascia design, and mounting locations with your original bumper before purchase. Confirm that any required center exhaust valance / diffuser and related trim components are available for reuse or separate replacement.

Compatibility Disclaimer

This product is an aftermarket replacement and restoration package and is not manufactured or supplied by Honda Motor Co., Ltd. OEM reference numbers, North American interchange numbers, vehicle names, trim names and body-style descriptions are provided solely for product identification and compatibility verification. Their use does not indicate that these products are genuine Honda OEM parts. Lighting installation requirements may vary depending on the vehicle’s original wiring, connectors and equipment configuration. Honda®, Civic® and related trademarks are the property of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, endorsed by or authorized by Honda Motor Co., Ltd.

Product Overview

Restore a damaged front end with this OE-style Front Bumper Cover Fascia Bare Shell, designed as a standalone aftermarket replacement for collision repair and exterior restoration. Constructed from flexible automotive-grade plastic, this replacement panel follows the original-style front body contour and compatible factory-style mounting locations. It is supplied in a primed, unpainted finish for professional paint preparation and color matching.

Package Includes

Bare Shell ONLY – NOT Included

This listing includes the front bumper cover main shell only.

The following components are NOT included:

• Front upper grille or grille garnish

• Fog light bezels / side bumper trim

• Fog lights or related lighting components

• Lower grille / air-intake inserts

• Front emblem or license-plate bracket

• Mounting brackets, retainers, clips, or hardware

• Additional bumper trim or accessories unless specifically stated

Compatible original components may be transferred from the existing bumper assembly when applicable.

Paint & Installation Notice

The bumper cover requires surface preparation, color matching, and final paint before installation. Professional body-shop preparation and installation are recommended. Always test fit the bumper cover and transferred components before painting, drilling, cutting, or permanent modification to confirm alignment and mounting locations. Previous collision damage, worn brackets, damaged retainers, or misaligned mounting areas may require repair or adjustment before installation. Painted, installed, drilled, cut, damaged, or permanently modified products may not qualify for return under the VELNOX Auto Return Policy.

Folded Shipping & Unboxing Notice

Due to its flexible construction, the bumper cover may be professionally folded and securely packed inside a reinforced shipping carton to help reduce oversized-carrier shipping costs. Temporary bends, waves, creases, or packaging impressions may be visible after unpacking. These conditions can result from folded packaging and do not necessarily indicate permanent damage.

After unpacking:

1. Remove all protective packaging.

2. Place the bumper cover in a warm, clean area.

3. Allow the flexible panel sufficient time to recover its molded shape.

4. Apply low, controlled heat gradually and evenly only if necessary.

5. Confirm proper shape and alignment before paint preparation or installation.

Avoid concentrated direct heat, open flame, or overheating, as excessive heat may damage the primer or permanently deform the panel.

Before Ordering

Compare Partslink HO1000322, OEM 04711-TGG-A60ZZ, the original bumper design, and mounting locations before purchase. Confirm that any required grille, fog light bezels, trim, brackets, retainers, or hardware are available for reuse or separate replacement.

Compatibility Disclaimer

This is an aftermarket replacement and restoration package and is not manufactured or supplied by Honda Motor Co., Ltd. OEM reference numbers, North American interchange numbers, vehicle names, trim names and body-style descriptions are provided solely for identification and compatibility reference. Their use does not indicate that these products are genuine Honda OEM parts. Sensor, radar and lighting installation requirements may vary depending on the vehicle’s original wiring and equipment configuration. Buyers should verify compatibility before installation. Honda®, Civic® and related trademarks are the property of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, endorsed by or authorized by Honda Motor Co., Ltd.

Product Overview

Restore the rear-end appearance of your Honda Civic with this complete 2-In-1 Rear Bumper Restoration Kit. This package combines the main rear bumper cover with the center lower lip / diffuser valance, giving you the two major exterior components needed for a cleaner and more complete rear bumper repair.

Package Includes

2-In-1 Kit Configuration

This restoration package includes:

1. Rear Bumper Cover Fascia Bare Shell

2. Rear Center Lower Lip / Diffuser Valance

The bumper cover and lower valance are supplied as separate components for installation.

Product Highlights

• Complete rear bumper cover and lower valance combination

• OE-style replacement design

• Primed bumper cover ready for professional paint preparation

• Matte black lower valance supplied in finished trim appearance

• Factory-style contours and mounting locations

• Suitable for collision repair and rear-end exterior restoration

• Convenient bundled solution compared with purchasing both components separately

Only the components specifically listed in the Package Includes table are supplied.

This kit does NOT include:

• Rear reflectors

• Side bumper retainers or brackets

• Mounting clips or hardware

• Additional rear bumper trim or accessories

Compatible original components may be reused where applicable.

Paint & Installation Notice

The rear bumper cover is supplied primed and unpainted and requires professional surface preparation, color matching, and painting before final installation. The lower valance is supplied in a matte black finish. Professional installation is recommended. Always test fit both components before painting the bumper cover to verify alignment and mounting points. Existing retainers, brackets, clips, or previously damaged mounting areas may require adjustment or replacement.

Important Ordering Notice

Before ordering, compare the reference numbers, component design, and mounting locations with your original parts.

Key references include:

• HO1100287 / OEM 04715-TBA-A00ZZ

• HO1116102 / OEM 71510-TBA-A00

• Hollander 106-05241 — Rear Bumper Cover

Only the two components listed in the package table are included.

Compatibility Disclaimer

This product is an aftermarket replacement and restoration package and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, trim names, and body-style descriptions are provided solely for product identification and compatibility verification. Custom lighting installation requirements may vary depending on the vehicle’s original wiring and equipment configuration. Honda® and Civic® are registered trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Product Overview

Restore the rear exterior of your Honda Accord with this coordinated facelift-style replacement kit. The package combines the main bumper cover with matching lower trim, chrome accents, exhaust outlet covers, and side mounting supports.

Package Includes

Important Package Details

This listing includes the Bright Chrome Silver exhaust outlet covers only.  Before ordering, compare your original bumper shape, lower valance design, exhaust openings, center garnish, side-retainer mounting points, and reference numbers with the components listed above.

Not Included

Rear reflector lamps, parking sensors, reinforcement beam, energy absorber, tailgate license-plate garnish, exhaust system components, wiring, mounting clips, hardware, and lower underbody support panels are not included.

Paint and Installation Notice

The rear bumper cover arrives primed and requires professional preparation and paint matching. Test-fit all components before painting, drilling, cutting, or final installation. Professional body-shop installation is strongly recommended. Minor primer variations or light handling marks may occur during manufacturing and shipping and are normally corrected during standard refinishing.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Product Overview

Restore the complete front bumper assembly with this 2-piece Front Bumper Cover Kit for compatible 2020-2022 Honda CR-V models. The kit includes a replacement Front Upper Bumper Cover and a matching Front Lower Bumper Valance with a pre-installed center honeycomb mesh grille, providing a convenient solution for repairing or replacing damaged front bumper components. Both components are manufactured to OE-style specifications with factory mounting locations and body contours for a precise fit. The upper bumper cover is supplied in a primed gray/black finish and should be properly prepared and painted before installation. The lower valance features a durable textured matte black finish designed to closely match the original factory appearance. Purchasing both components together helps ensure a consistent fit and appearance while simplifying the repair process. Each kit is securely packaged in a reinforced oversized shipping carton with protective foam inserts to help minimize the risk of shipping damage.

Reference Numbers

What's Included

• Front Upper Bumper Cover

• Front Lower Bumper Valance

• Pre-installed Center Honeycomb Mesh Grille

What's Not Included

The following original vehicle components are not included and must be reused from your existing vehicle or purchased separately if required:

• Upper grille assembly

• Honda emblem

• Fog lamp bezels / covers

• Parking sensors and sensor retainers (if equipped)

• Front bumper reinforcement

• Energy absorber

• Tow hook cover

• Mounting brackets

• Clips, screws, retainers, and other installation hardware

• Any components not specifically listed above

Fitment & Installation

Compatible with North American 2020–2022 Honda CR-V Facelift LX and EX models equipped with the corresponding factory front bumper configuration. This kit is not compatible with 2017–2019 Honda CR-V models due to differences in bumper design, lower valance, and mounting configuration. Before ordering, compare your original part numbers with the reference information above to verify compatibility.Test fit all components before painting or final installation. Professional installation is recommended to ensure proper alignment with adjacent body panels. Products that have been painted, modified, or installed may not qualify for return under the VELNOX Auto Return Policy.

Compatibility Notice

This is an aftermarket replacement product and is not a genuine Honda OEM part. OEM part numbers, Partslink numbers, Hollander interchange numbers, vehicle names, model names, and other manufacturer references are provided solely for product identification and compatibility reference purposes. Honda® and CR-V® are registered trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd. References to Honda®, CR-V®, OEM part numbers, and interchange numbers are used only to identify the intended vehicle application and do not imply any affiliation with or endorsement by the original vehicle manufacturer. Vehicle production dates, trim levels, and factory-installed equipment may affect compatibility. Please verify fitment before placing your order. If you have any questions regarding compatibility, please contact VELNOX Auto before ordering.

Product Overview

This Front Lower Bumper Valance features a factory-style integrated center honeycomb mesh grille and is manufactured to replace the original lower bumper valance on compatible 2020–2022 Honda CR-V models. The factory-style profile, mounting locations, and textured finish help maintain the original appearance of the front bumper after repair or replacement. Injection molded from automotive-grade thermoplastic, the valance is built to withstand everyday road conditions while maintaining the flexibility expected of modern bumper components. The integrated mesh grille comes pre-installed, eliminating the need for separate assembly and simplifying installation. Finished in textured matte black, the valance is designed to closely match the original factory surface and typically does not require painting before installation.

Part Information

• OEM Part Numbers： 71102-TLA-A50 | 71102-TLA-A70

• Partslink Number：HO1015122

• Hollander Interchange Number:101-99430X

What's Included

• Front Lower Bumper Valance Skirt

• Pre-installed Center Honeycomb Mesh Grille

• Textured Matte Black Finish

The following original components are not included:

• Upper bumper cover

• Upper grille assembly

• Front emblem

• Headlight eyebrow trim

• Fog lamp housing caps / bezels

• Parking sensors and retainers (if equipped)

• Mounting brackets

• Clips, screws, fasteners, and other installation hardware

• Any components not specifically listed above

Original components may be reused if they remain in good condition.

Fitment & Installation

Compatible with North American 2020–2022 Honda CR-V facelift models only. This valance is not compatible with 2017–2019 models, as Honda introduced a revised front bumper assembly and lower grille design beginning with the 2020 facelift. Before ordering, compare your original part with the OEM, Partslink, or Hollander reference numbers provided above. For best results, test fit the part before making any permanent modifications. Professional installation is recommended to ensure proper alignment with the original bumper assembly. Products that have been painted, modified, or installed may not qualify for return under the VELNOX Auto Return Policy.

Compatibility Disclaimer

This is an aftermarket replacement part and is not a genuine Honda OEM product. OEM part numbers, Partslink numbers, Hollander interchange numbers, vehicle names, model names, and other manufacturer references are provided solely for product identification and compatibility reference purposes. Honda® and CR-V® are registered trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd. References to Honda®, CR-V®, OEM part numbers, and interchange numbers are used only to identify the intended vehicle application and do not imply any relationship with or approval by Honda Motor Co., Ltd. Vehicle production dates, trim levels, and factory-installed equipment may affect compatibility. Please verify fitment before placing your order or contact VELNOX Auto if you need assistance.

Product Overview

Restore the front-end appearance of your Honda CR-V with this aftermarket replacement Front Upper Bumper Cover Fascia. Designed for North American 2017–2019 Honda CR-V pre-facelift models, this replacement panel features an OE-style shape and a lightweight, flexible plastic construction. The bumper cover is supplied in a primed gray or black finish. Professional surface preparation, test fitting, color matching, painting, and installation are required.

Package Includes

• 1× Front Bumper Upper Cover Bare Skin Shell Panel

• Primed gray or black finish

• Pre-facelift specifications

• Partslink Number: HO1014104

• OEM Reference Numbers: 04711-TLA-A00ZZ / 71101-TLA-A00ZZ

• Hollander Number: 101-60317

Bare Shell Only

This listing includes the Front Upper Bumper Cover Bare Skin Shell ONLY.

The following components are not included:

• Lower bumper balance or valance grille

• Chrome flying-wing strip moldings

• Fog-light bezel covers

Existing factory components must be transferred from the original bumper cover or purchased separately as needed.

Folded Packaging Notice

To reduce oversized carrier shipping surcharges and provide greater shipping savings, this flexible bumper cover may be securely folded and packed with high-resiliency protective wrapping. Temporary bends, creases, or deformation may be visible after unpacking. Place the bumper cover in a warm environment and allow it sufficient time to gradually return to its original shape before test fitting or installation. Controlled heat may also be applied carefully by a qualified professional when necessary.

Paint and Installation Notice

This bumper cover is supplied in a primed finish and is not pre-painted. Professional surface preparation, test fitting, color matching, painting, and installation are strongly recommended. Always test-fit the bumper cover before painting, drilling, trimming, or making any modifications. Painted, modified, or installed parts may not be eligible for return.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM assembly. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other reference identifiers are provided solely for product identification and compatibility-reference purposes. Honda® and CR-V® are registered trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Product Overview

Restore the lower front-end appearance of your Honda CR-V with this aftermarket replacement Front Lower Bumper Cover Valance with Integrated Mesh Grille. This complete lower valance assembly includes a pre-assembled center honeycomb mesh grille and features a textured black matte finish for a clean, factory-style appearance. It is designed for North American 2017–2019 Honda CR-V models.

Package Includes

• 1× Front Lower Bumper Valance Skirt

• 1× Pre-assembled center honeycomb mesh grille air panel

• Textured black matte finish

• Partslink Number: HO1015117

• OEM Reference Number: 71102-TLA-A00

• Hollander Number: 101-60318

Lower Valance Assembly Only - This listing includes the Front Lower Bumper Valance Skirt with Pre-Assembled Center Honeycomb Mesh Grille ONLY.

The following components are not included:

• Front upper bumper bare-shell cover

• Upper chrome grille bars

• Fog-lamp housing caps

Existing factory components must be transferred from the original bumper assembly or purchased separately as needed.

Protective Shipping Notice

The integrated honeycomb mesh grille requires additional protection during transportation. This product is shipped in a full-size rigid protective case through FedEx Ground to help preserve the shape and structural integrity of the honeycomb grille and surrounding mounting areas.

Installation Notice

Professional installation is recommended. Inspect and test-fit the component before installation or modification. The textured black matte finish is typically installed without painting. Any optional refinishing or customization should be completed only after confirming proper fitment.

Compatibility Disclaimer

This is an aftermarket replacement part and is not a genuine Honda OEM product. OEM part numbers, North American interchange numbers, vehicle names, model names, and other reference identifiers are provided solely for product identification and compatibility-reference purposes. Honda® and CR-V® are registered trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Product Overview

Created for the 2021–2023 Nissan Rogue S & SV on the T33 new-generation platform, this aftermarket front bumper cover follows the distinctive layered V-opening fascia layout used on the standard-trim front end. The shell is formed from durable automotive-grade exterior plastic and supplied in a paintable black finish for professional surface preparation and refinishing. Its T33-specific shape is intended to restore the correct front fascia profile when the original bumper has been damaged by impact, cracking, scraping, deformation, or prior body repair.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

T33 Layered-V Configuration

This bumper cover is intended for 2021–2023 Nissan Rogue S & SV models using the T33 layered V-opening front fascia design. Before ordering, compare the center opening layout, side fascia contours, sensor-hole configuration, mounting tabs, and overall bumper shape with your original part. Different trims or sensor-equipped front bumper versions may use another fascia design.

What’s Not Included

This listing includes the front bumper cover shell only. Main grille components, lower grille inserts, side bezels, brackets, retainers, reinforcement parts, sensors, lighting components, emblems, and mounting hardware are not included unless specifically listed in the package contents.

Paint & Installation

The bumper cover is supplied in a paintable black finish and requires final preparation and refinishing to match the vehicle. Test-fit the fascia before painting to confirm alignment around the grille openings, headlights, fender edges, and mounting points. Professional body-shop refinishing and installation are recommended.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. Nissan® and Rogue® are registered trademarks of Nissan Motor Co., Ltd. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, front fascia configuration, and existing components before purchase.

Product Overview

Designed for 2017–2020 Nissan Rogue SL & Premium post-facelift models, this rear bumper cover is configured as a complete 1-piece unified high-trim assembly with four pre-molded backup radar sensor holes. The fascia follows the corresponding deep-corner rear bumper profile used on the higher-trim sensor-equipped configuration. Its integrated one-piece construction provides a complete exterior replacement solution when the original rear bumper has been cracked, scraped, deformed, collision-damaged, or previously repaired. Unlike the standard non-sensor S/SV rear fascia, this version is specifically configured around the 4-sensor high-trim rear bumper layout, making sensor-hole placement and overall bumper contour critical fitment points.

Reference Numbers

Package Includes

• 1x Complete Rear Bumper Cover Integrated Assembly

4-Sensor High-Trim Configuration

This rear bumper assembly is intended specifically for 2017–2020 Nissan Rogue SL & Premium post-facelift models using the corresponding four-sensor backup radar configuration. Before ordering, compare the sensor-hole count and placement, deep-corner profile, overall bumper contour, mounting locations, and reference numbers with your existing rear bumper. The standard S/SV non-sensor configuration uses a different rear fascia layout and should not be treated as interchangeable.

Unified One-Piece Design

The bumper is supplied as one complete integrated rear fascia assembly, not as multiple separate bumper-cover sections. Its unified construction is designed to maintain the correct high-trim profile and corresponding 4-sensor layout across the complete rear bumper surface.

Components Not Included

This listing includes the complete rear bumper cover assembly only. Backup radar sensors, sensor holders or brackets, reinforcement components, impact absorbers, mounting brackets, retainers, hardware, and other separately installed rear bumper components are not included unless specifically stated in the package contents.

Fitment & Installation

Test-fit the bumper before final installation to verify sensor-hole alignment, deep-corner fitment, quarter-panel alignment, and mounting-point compatibility. Professional body-shop installation is recommended, particularly when previous collision damage has affected surrounding mounting locations, sensor brackets, or adjacent body panels.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. Nissan® and Rogue® are registered trademarks of Nissan Motor Co., Ltd. Vehicle names, trademarks, OEM numbers, Partslink references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, radar-sensor configuration, and existing components before purchase.

Product Overview

This complete rear bumper cover assembly is designed for 2017–2020 Nissan Rogue S & SV post-facelift models using the standard non-sensor rear bumper configuration. The bumper is manufactured as a single unified 1-piece assembly, combining the upper body panel skin with the lower textured black valance apron into one integrated structure. This design matches the corresponding S/SV rear fascia layout while eliminating the need to source the upper bumper section and lower valance separately. It is a suitable replacement for an original bumper assembly affected by collision damage, cracks, scrapes, deformation, or previous body repair.

Reference Numbers

Package Includes

• 1x Complete Rear Bumper Cover Assembly
  

Integrated 1-Piece Construction

The upper bumper skin and lower textured black valance are molded together as one complete unified rear bumper assembly. This is not a two-piece package. Both visual sections are incorporated into a single integrated bumper cover, providing the correct combined rear fascia configuration for the applicable S/SV models.

Fitment Configuration

Designed specifically for 2017–2020 Nissan Rogue S & SV post-facelift models with the smooth non-sensor rear bumper layout. Before ordering, compare the overall bumper shape, lower textured valance profile, sensor-hole layout, corner contour, mounting locations, and reference numbers with your original part.Sensor-equipped or higher-trim rear bumper configurations may require a different version.

What’s Not Included

This listing includes the complete integrated rear bumper cover assembly only. Reflectors, parking sensors, reinforcement components, impact absorbers, brackets, retainers, mounting hardware, and other separately installed rear bumper components are not included unless specifically stated in the package contents.

Installation Notice

Test-fit the complete bumper assembly before final installation to confirm alignment around the quarter-panel edges, lower valance area, corner profile, and mounting points. Professional body-shop installation is recommended, particularly if previous collision damage has affected surrounding brackets or mounting locations.

Packaging & Handling

Because this is a large flexible exterior body panel, minor temporary flexing may occur during packaging or transportation. After unpacking, allow the bumper assembly to rest at room temperature and recover its natural contour before test-fitting or installation.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. Nissan® and Rogue® are registered trademarks of Nissan Motor Co., Ltd. Vehicle names, trademarks, OEM numbers, Partslink references, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, rear bumper configuration, and existing components before purchase.

Product Description

This Rear Bumper Cover Replacement is designed for 2016-2019 Nissan Sentra Standard Base S and SV Trims Only with the 7th Gen post-facelift rear-end configuration and smooth non-sensor deep-pocket trailing layout. The bumper cover serves as the exterior rear fascia shell and is suitable for replacing a cracked, scraped, dented, deformed, or collision-damaged original rear bumper cover. Its molded profile is designed to correspond with the specified post-facelift rear-body contours and surrounding mounting areas. This listing includes the standalone rear bumper cover shell only – NI1100311 / OEM: 62022-4FU0A.

Interchange Part Numbers

Please compare your vehicle trim, rear bumper configuration, sensor layout, and reference numbers with the information below before ordering.

Key Features

• Standalone 1-piece rear bumper cover replacement shell

• Designed for 2016-2019 Nissan Sentra Base S and SV trims

• 7th Gen post-facelift rear fascia configuration

• Smooth non-sensor bumper layout

• Deep-pocket trailing rear fascia design

• Molded profile for the corresponding rear-body and mounting layout

• Suitable for collision repair, exterior restoration, and damaged bumper replacement

Technical Fitment Notes

This rear bumper cover is intended specifically for the 2016-2019 Nissan Sentra 7th Gen post-facelift configuration. The molded fascia profile is designed around the corresponding rear-end layout, including the outer corner contours, deep-pocket trailing areas, lower fascia structure, and mounting locations. Important: This bumper cover is intended for the smooth non-sensor configuration. It should not be treated as interchangeable with rear bumper covers that use factory-molded parking sensor openings or another rear fascia configuration with different openings or mounting points. When matched to the correct vehicle, trim, and bumper configuration, this cover is designed as a direct replacement-style exterior body component for the corresponding mounting locations.

Package Includes

• 1 × Rear Bumper Cover Face Shell

Total: 1 Piece – Standalone Rear Bumper Cover Shell Only

Important Component Notice

This listing includes only the rear bumper cover shell specifically stated in the Package Includes section. Parking sensors, sensor hardware, trim pieces, reflectors, brackets, retainers, absorber components, reinforcement bars, exhaust trim components, fasteners, clips, and other surrounding parts are not included unless specifically stated otherwise. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the Product Description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original rear bumper cover, vehicle trim, rear fascia configuration, sensor layout, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the 2016-2019 Nissan Sentra Standard Base S and SV 7th Gen post-facelift smooth non-sensor configuration. Please confirm your vehicle trim, existing bumper layout, and listed interchange numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. or Nissan North America, Inc. Nissan® and Sentra® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, sensor configuration, mounting points, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Overview

Designed for 2017–2020 Nissan Rogue SL, Premium & Hybrid post-facelift models, this aftermarket front bumper cover features two pre-molded parking sensor holes for the corresponding high-trim front fascia configuration. Made from durable automotive-grade impact-resistant plastic, the fascia is supplied in a primed black, paintable finish for professional refinishing. Its sensor-ready layout is suited for replacing a cracked, scraped, deformed, collision-damaged, or previously repaired original bumper cover.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

2-Sensor Fitment Configuration

This bumper cover is intended for 2017–2020 Nissan Rogue SL, Premium & Hybrid models using the 2-sensor post-facelift front bumper layout. Before ordering, compare the sensor-hole count and placement, grille opening, side openings, fascia contour, mounting tabs, and reference numbers with your original bumper. S/SV non-sensor bumper configurations use a different front fascia and should not be treated as interchangeable.

What’s Not Included

This listing includes the front bumper cover shell only. Parking sensors, sensor retainers or brackets, grille assemblies, side bezels or inserts, reinforcement parts, lighting components, emblems, mounting hardware, and other surrounding front bumper parts are not included unless specifically stated in the package contents.

Refinishing & Installation

The fascia is supplied in a primed black, unpainted finish and requires final preparation and painting before installation. Test-fit before refinishing to verify sensor positioning, grille alignment, fender-edge fitment, and mounting locations. Professional installation is recommended.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. Nissan® and Rogue® are registered trademarks of Nissan Motor Co., Ltd. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, sensor configuration, and existing components before purchase.

Product Overview

Designed around the distinctive V-Motion front fascia used on 2017–2020 Nissan Rogue S & SV post-facelift models, this aftermarket bumper cover is intended for the corresponding non-sensor standard-trim configuration. Its enlarged center grille opening and sculpted front profile are specific to this generation’s updated styling, making correct fascia selection especially important. Molded from durable automotive-grade impact-resistant plastic, the cover is supplied in a primed black, paintable finish for professional refinishing. A suitable replacement for factory bumpers affected by collision damage, cracks, deep scrapes, deformation, or previous body repair.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Armor Shield Shell

V-Motion Fitment Check

This fascia is intended for 2017–2020 Nissan Rogue S & SV post-facelift models with the non-sensor V-Motion bumper layout. Compare the center grille opening, side openings, bumper contour, sensor-hole layout, mounting tabs, and reference numbers with your original bumper before purchase. Higher-trim or sensor-equipped Rogue front bumper configurations may use a different fascia.

What’s Not Included

This listing includes the front bumper cover shell only. Main and lower grille components, side bezels or inserts, brackets, retainers, sensors, lighting parts, reinforcement components, emblems, and mounting hardware are not included unless specifically listed in the package contents.

Paint & Installation

The bumper cover is supplied in a primed black, unpainted finish and requires final preparation, color matching, and painting before installation. Test-fit the fascia before refinishing to confirm alignment around the grille, headlights, fenders, and mounting points. Professional installation is recommended.

Packaging & Handling

Minor temporary flexing may occur during shipping because bumper covers are large and flexible exterior panels. After unpacking, allow the fascia to rest at room temperature and recover its natural contour before test-fitting or refinishing.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd.  Nissan® and Rogue® are registered trademarks of Nissan Motor Co., Ltd. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, front fascia configuration, and existing components before purchase.

Product Overview

This high-trim rear bumper cover assembly is configured for 2014–2016 Nissan Rogue SL, Premium & Luxury pre-facelift models equipped with four factory-style backup radar sensor openings. The bumper is built as a single integrated rear fascia, combining the upper body-panel area and lower valance-style section into one unified molded structure. Unlike the standard non-sensor S/SV version, this configuration is specifically shaped around the premium rear bumper layout and incorporates the 4-sensor backup-assist pattern required by the corresponding higher-trim application. Manufactured from durable automotive-grade exterior plastic, the assembly is intended for collision restoration, major cosmetic repair, or replacement of an original fascia with cracks, deformation, sensor-area damage, or previous bodywork.

Reference Numbers

Package Includes

• 1x Complete Rear Bumper Cover Unified Assembly

• Integrated upper fascia and lower valance-style structure

• Four pre-molded backup radar sensor openings

High-Trim Sensor Configuration

This bumper is intended for SL, Premium & Luxury rear fascia configurations with four backup radar sensor holes. The sensor-hole pattern is an important fitment feature. Before ordering, compare the number and position of the sensor openings, reflector areas, lower fascia contour, mounting locations, and overall bumper profile with the original part on your Rogue. A non-sensor S/SV rear bumper or another sensor configuration may use a different fascia layout.

Integrated One-Piece Design

The upper bumper body section and lower rear valance area are molded together as one complete assembly rather than supplied as separate pieces. This integrated construction helps preserve the correct high-trim rear appearance while eliminating the need to source a separate lower fascia section.

What’s Not Included

This listing includes the complete rear bumper cover assembly only.  Backup radar sensors, sensor retainers or brackets, reflectors, reinforcement bars, impact absorbers, mounting brackets, hardware, and other surrounding rear bumper components are not included unless specifically stated in the package contents.

Fitment & Installation

Test-fit the bumper before final installation to verify sensor-hole alignment, reflector positioning, quarter-panel fitment, lower fascia alignment, and mounting-point compatibility. Professional body-shop installation is recommended, especially when the original vehicle has collision damage around the rear mounting structure or sensor system.

Packaging & Handling

Because this is a large integrated fascia panel, minor temporary flexing may occur during packaging or transportation. After unpacking, allow the bumper to rest at room temperature and return to its natural contour before installation or any required refinishing.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. Nissan® and Rogue® are registered trademarks of Nissan Motor Co., Ltd. Vehicle names, trademarks, OEM numbers, Partslink references, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, sensor configuration, and existing components before purchase.

Product Overview

This aftermarket rear bumper cover is designed for 2014–2016 Nissan Rogue S & SV pre-facelift models using the corresponding non-sensor one-piece rear fascia configuration. Unlike a separate upper bumper and lower valance setup, this version is manufactured as a single unified rear bumper assembly, combining the upper body-panel section and lower valance-style area into one integrated shell. The one-piece construction helps maintain the correct factory-style rear profile while simplifying replacement of a damaged original fascia. Made from durable automotive-grade impact-resistant plastic, the bumper cover is suitable for collision repair, cosmetic restoration, or replacement of panels affected by cracks, scrapes, deformation, or previous repair work.

Reference Numbers

Package Includes

• 1x Complete Rear Bumper Cover Unified Assembly

• Integrated upper body-panel and lower valance-style fascia design

• Single-piece construction

One-Piece Configuration

This product is supplied as one complete molded rear bumper cover, not as two separate bumper pieces. The upper bumper section and lower black valance-style area are incorporated into the same unified fascia structure for the corresponding 2014–2016 Nissan Rogue S & SV pre-facelift configuration. Before ordering, compare the overall rear bumper contour, lower fascia design, reflector areas, mounting locations, and reference numbers with your existing part.

Fitment Notes

Designed for 2014–2016 Nissan Rogue S & SV pre-facelift models using the compatible non-sensor rear bumper layout. Sensor-equipped, higher-trim, or differently configured Rogue rear bumpers may use another fascia design. Verify your vehicle’s trim and existing bumper layout before purchase.

What’s Not Included

This listing includes the complete one-piece rear bumper cover assembly only. Reflectors, parking sensors, reinforcement bars, impact absorbers, brackets, retainers, mounting hardware, lighting components, and other surrounding rear bumper parts are not included unless specifically stated in the package contents.

Finish & Installation

The bumper cover should be test-fitted before final refinishing or installation to confirm alignment with the quarter-panel edges, reflector locations, and mounting points. Professional body-shop preparation and installation are recommended, particularly when the vehicle has previous collision damage or damaged surrounding mounting components.

Packaging & Handling