Replacement Parts

Product Overview

Replace a damaged or worn rear fascia with this aftermarket rear bumper cover, engineered for 2020–2022 Toyota Corolla SE & XSE pre-facelift models. Designed around the more aggressive SE/XSE rear profile, this bumper cover is molded from durable automotive-grade impact-resistant plastic and supplied in a primed black finish for professional prep and painting. It is well suited for collision repair, cosmetic restoration, or replacing a factory bumper cover with cracks, scrapes, deformation, or prior repair damage.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

Fitment Verification

This rear bumper cover is designed specifically for 2020–2022 Toyota Corolla SE & XSE pre-facelift configurations. Before ordering, compare the overall bumper contour, lower rear openings, reflector positions, mounting points, and reference numbers with the original part on your vehicle. Standard-trim Corolla rear bumper designs may differ from the SE/XSE configuration.

Parts Not Included

This listing is for the rear bumper cover fascia shell only. Lower valance or diffuser-style trim, reflectors, brackets, retainers, reinforcement components, sensors, mounting hardware, and other surrounding rear bumper parts are not included unless specifically stated in the package contents.

Paint & Installation

The bumper cover is supplied in a primed black, unpainted finish and is intended to be professionally refinished to match the vehicle.  Test-fitting before paintwork is strongly recommended. Proper surface preparation, color matching, and professional installation help ensure accurate alignment and a clean finished appearance.

Shipping & Shape Recovery

As a large flexible exterior panel, the bumper cover may experience minor temporary flexing during transit. After unpacking, allow the part to rest at room temperature and recover its natural shape before test-fitting, preparation, or painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Corolla® are registered trademarks of Toyota Motor Corporation. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, and existing components before purchase.

Product Overview

Bring the front of your Corolla back to a clean, sport-oriented appearance with this aftermarket front bumper cover, developed for 2020–2022 Toyota Corolla SE & XSE pre-facelift models. Manufactured from durable automotive-grade impact-resistant plastic, the fascia is supplied in a primed black finish for professional prep and painting. Its SE/XSE-specific design makes it a strong replacement choice for collision damage, cosmetic wear, or previously repaired bumper covers that no longer align or present properly.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

Confirm Fitment Before Purchase

This bumper cover is intended specifically for 2020–2022 Toyota Corolla SE & XSE pre-facelift configurations. Before ordering, compare your original bumper’s overall contour, grille openings, side bezel areas, mounting tabs, and reference numbers. SE/XSE bumper layouts differ from standard-trim Corolla configurations.

Components Not Included

This listing includes the front bumper cover shell only. Upper and lower grilles, side bezels or inserts, brackets, retainers, reinforcement components, lighting parts, sensors, emblems, mounting hardware, and other surrounding bumper components are not included unless specifically listed in the package contents.

Refinishing & Installation

The bumper is supplied in a primed black, unpainted finish intended for professional refinishing. Test-fit the fascia before painting, then complete the necessary surface preparation, color matching, and final paintwork. Professional installation is recommended to help ensure proper panel alignment and fit.

Packaging Note

Because bumper covers are large and flexible, minor temporary flexing may occur during transportation. After unpacking, allow the fascia to rest at room temperature and recover its natural shape before test-fitting or refinishing.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Corolla® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, and existing components before purchase.

Product Overview

Replace a worn or damaged rear fascia with this aftermarket rear bumper cover, developed for 2020–2022 Toyota Corolla L, LE, XLE & Hybrid pre-facelift configurations. Molded from durable automotive-grade impact-resistant plastic, the bumper cover is supplied in a primed black finish for professional preparation and color matching. Its trim-specific rear profile makes it a suitable replacement for collision repairs, cosmetic restoration, or heavily damaged original bumper covers.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

Verify Your Application

This rear bumper cover is intended for 2020–2022 Toyota Corolla L, LE, XLE & Hybrid pre-facelift models. Before ordering, compare the rear bumper profile, lower openings, reflector positions, mounting areas, and reference numbers with the original part on your vehicle. Different trim configurations may use different rear fascia designs.

Components Not Included

This listing is for the rear bumper cover shell only. Reflectors, lower valance or garnish pieces, brackets, retainers, reinforcement components, sensors, mounting hardware, and other surrounding rear bumper parts are not included unless specifically identified in the package contents.

Refinishing & Installation

The primed black surface is intended for refinishing and is not a final exterior paint finish. Test-fit the bumper before painting, then complete the required surface preparation, color matching, and refinishing. Professional body-shop installation is recommended, particularly when surrounding mounting points have previous collision damage.

Packaging & Shape Recovery

Rear bumper covers are large, flexible exterior panels and may experience minor temporary flexing during transportation. After unpacking, allow the bumper cover to rest at room temperature and return to its natural shape before test-fitting, preparation, or painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Corolla® are registered trademarks of Toyota Motor Corporation. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, and existing components before purchase.

Product Overview

Bring the front of your 2020–2022 Toyota Corolla L, LE, or XLE back to a clean, repair-ready condition with this aftermarket bumper cover fascia. Designed around the pre-facelift standard-trim front bumper layout, the shell is manufactured from durable automotive-grade plastic and supplied in a primed black finish for professional refinishing. It is well suited for collision repairs, cosmetic replacement, or vehicles with cracked, scraped, or heavily worn original bumper covers.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

Confirm Fitment Before Ordering

This bumper cover is intended for 2020–2022 Toyota Corolla L, LE & XLE pre-facelift configurations. Before purchase, compare your original bumper’s overall profile, grille openings, side openings, mounting tabs, and reference numbers. Trim-specific bumper layouts may differ even within the same model year.

Components Sold Separately

This listing is for the bumper cover shell only.  Grilles, side bezels or inserts, brackets, retainers, reinforcement bars, lighting components, sensors, emblems, and installation hardware are not included unless specifically identified as part of the package.

Refinishing & Installation

The supplied primed black surface is not a final exterior finish. The bumper should be test-fitted before painting, followed by proper surface preparation, color matching, and refinishing. Professional installation is recommended, particularly when the vehicle has prior collision damage or surrounding mounting points require adjustment or replacement.

Packaging Note

Large automotive fascia panels are naturally flexible and may show temporary movement in shape during transportation. After unpacking, place the bumper in a suitable indoor environment and allow it to settle into its normal form before test-fitting or refinishing.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Corolla® are registered trademarks of Toyota Motor Corporation. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, and existing components before purchase.

Product Overview

Refresh the rear appearance of your Corolla with this aftermarket rear bumper cover replacement, designed specifically for 2017–2019 Toyota Corolla SE & XSE facelift models. Made from durable automotive-grade impact-resistant plastic, this rear fascia shell comes in a primed black finish for professional preparation and painting. It is a practical solution for replacing a cracked, scraped, impact-damaged, or previously repaired factory bumper cover while maintaining the sportier SE/XSE rear-end styling.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

Fitment Check Before Purchase

Please confirm your vehicle year, SE/XSE trim configuration, rear bumper profile, lower openings, reflector locations, mounting points, and reference numbers before ordering. This bumper cover is designed specifically for 2017–2019 Toyota Corolla SE & XSE facelift configurations and is not intended for LE, XLE, or other rear bumper layouts.

What’s Not Included

This listing includes the rear bumper cover fascia shell only. Lower valance or garnish components, reflectors, brackets, retainers, reinforcement components, mounting hardware, and other surrounding rear bumper accessories are not included unless specifically listed in the package contents.

Paint & Installation Notice

The bumper cover is supplied in a primed black, unpainted finish and requires final surface preparation, paint matching, and refinishing before installation. Test-fitting before painting is strongly recommended. Professional body-shop preparation and installation are recommended to help ensure proper alignment and finish quality.

Shipping & Packaging Note

Because automotive bumper covers are large and flexible, minor temporary flexing may occur during transportation. After unpacking, allow the bumper cover to rest at room temperature and recover its natural shape before test-fitting, preparation, or painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Corolla® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Upgrade the front appearance of your Corolla with this aftermarket front bumper cover, designed for 2017–2019 Toyota Corolla SE & XSE facelift models. Made from durable automotive-grade impact-resistant plastic, this fascia shell comes in a primed black finish for professional preparation and painting. It is well suited for replacing a cracked, scraped, collision-damaged, or previously repaired factory bumper cover while preserving the sharper SE/XSE front-end styling.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

Fitment Check Before Purchase

Please confirm your vehicle year, SE/XSE trim configuration, bumper profile, grille and bezel openings, mounting locations, and reference numbers before ordering. This bumper cover is designed specifically for 2017–2019 Toyota Corolla SE & XSE facelift configurations and is not intended for LE, XLE, or other bumper layouts.

What’s Not Included

This listing includes the front bumper cover fascia shell only. Upper and lower grille components, side inserts or bezels, brackets, retainers, reinforcement components, lighting parts, mounting hardware, and other surrounding front bumper accessories are not included unless specifically listed in the package contents.

Paint & Installation Notice

The bumper cover is supplied in a primed black, unpainted finish and requires final surface preparation, paint matching, and refinishing before installation. Test-fitting before painting is strongly recommended. Professional body-shop preparation and installation are recommended to help ensure proper alignment and finish quality.

Shipping & Packaging Note

Because automotive bumper covers are large and flexible, minor temporary flexing may occur during transportation.  After unpacking, allow the bumper cover to rest at room temperature and recover its natural shape before test-fitting, preparation, or painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Corolla® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Give your Corolla’s rear end a clean, factory-style refresh with this aftermarket rear bumper cover, developed for 2017–2019 Toyota Corolla LE & XLE trim configurations. Made from durable automotive-grade impact-resistant plastic, this 1-piece fascia shell is supplied in a primed black finish for professional prep and painting. It is a practical replacement for bumper covers affected by cracks, scrapes, impact damage, or previous body repair.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

Fitment Check Before Purchase

Confirm your vehicle year, trim level, bumper profile, mounting locations, and reference numbers before ordering.This rear bumper cover is intended for 2017–2019 Toyota Corolla LE & XLE configurations. Compare the lower openings, reflector areas, and mounting points with your original bumper to help confirm the correct application.

What’s Not Included

This listing is for the rear bumper cover shell only. Reflectors, lower garnish or valance pieces, brackets, retainers, reinforcement components, mounting hardware, and other surrounding rear bumper parts are not included unless specifically listed in the package contents.

Paint & Installation Notice

The bumper cover is supplied in a primed black, unpainted finish and requires final surface preparation, paint matching, and refinishing before installation. Test-fitting before painting is strongly recommended. Professional body-shop preparation and installation are also recommended to help ensure proper alignment and finish quality.

Shipping & Packaging Note

Because bumper covers are large and flexible, minor temporary flexing may occur during transportation. After unpacking, allow the bumper cover to rest at room temperature and recover its natural shape before test-fitting or refinishing.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Corolla® are registered trademarks of Toyota Motor Corporation. Vehicle names, trademarks, OEM numbers, Partslink numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Refresh the front appearance of your Toyota Corolla with this direct-fit aftermarket bumper cover, engineered for LE & XLE trim configurations. Built from durable automotive-grade impact-resistant plastic, this 1-piece fascia shell comes in a primed black finish and is ready for professional surface preparation and painting. It offers a clean replacement solution for worn, cracked, scraped, or collision-damaged factory bumper covers while maintaining the vehicle’s original front-end styling.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

Before You Order

Please verify your vehicle year, trim configuration, front bumper design, and reference numbers before purchasing. Compare the bumper shape, grille and bezel openings, mounting points, and reference numbers with your existing part to confirm compatibility. Designed specifically for Toyota Corolla LE & XLE bumper configurations. Not intended for other bumper or trim configurations.

What’s Not Included

This listing includes the front bumper cover fascia shell only. Upper and lower grille components, side inserts or bezels, brackets, retainers, reinforcement components, lighting parts, and mounting hardware are not included unless specifically stated in the package contents.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Corolla® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, interchange numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore your Toyota Corolla’s rear exterior appearance with this aftermarket rear bumper cover replacement, designed specifically for 2014–2016 Toyota Corolla S & Special Edition pre-facelift trims. Constructed from durable automotive-grade impact-resistant plastic, this rear bumper fascia shell features a primed black finish and is ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

Before You Order

Please verify your vehicle year, trim configuration, rear bumper design, and reference numbers before purchasing. Compare the bumper shape, lower openings, reflector locations, mounting points, and reference numbers with your existing part to confirm compatibility. Designed specifically for 2014–2016 Toyota Corolla S & Special Edition pre-facelift trims. Not intended for L, LE, LE Eco, or other bumper configurations.

What’s Not Included

This listing includes the rear bumper cover fascia shell only. Lower valance or garnish components, reflectors, brackets, retainers, reinforcement components, and mounting hardware are not included unless specifically stated in the package contents.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Corolla® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, interchange numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore your Toyota Corolla’s front-end appearance with this aftermarket front bumper cover replacement, designed specifically for 2014–2016 Toyota Corolla S & Special Edition pre-facelift trims. Constructed from durable automotive-grade impact-resistant plastic, this front bumper fascia shell features a primed black finish and is ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

Before You Order

Please verify your vehicle year, trim configuration, front bumper design, and reference numbers before purchasing. Compare the bumper shape, grille and bezel openings, mounting points, and reference numbers with your existing part to confirm compatibility. Designed specifically for 2014–2016 Toyota Corolla S & Special Edition pre-facelift trims. Not intended for L, LE, LE Eco, or other bumper configurations.

What’s Not Included

This listing includes the front bumper cover fascia shell only. Upper and lower grille components, side inserts or bezels, brackets, retainers, reinforcement components, lighting parts, and mounting hardware are not included unless specifically stated in the package contents.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Corolla® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, interchange numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore your Toyota Corolla’s rear exterior appearance with this aftermarket rear bumper cover replacement, designed specifically for 2014–2016 Toyota Corolla L, LE, and LE Eco pre-facelift trims. Constructed from durable automotive-grade impact-resistant plastic, this rear bumper fascia shell features a primed black finish and is ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

Before You Order

Please verify your vehicle year, trim configuration, rear bumper design, and reference numbers before purchasing. Compare the bumper shape, lower openings, reflector locations, mounting points, and reference numbers with your existing part to confirm compatibility. Designed specifically for 2014–2016 Toyota Corolla L, LE, and LE Eco pre-facelift trims. Not intended for other bumper or trim configurations.

What’s Not Included

This listing includes the rear bumper cover fascia shell only. Lower valance or garnish components, reflectors, brackets, retainers, reinforcement components, and mounting hardware are not included unless specifically stated in the package contents.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Corolla® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, interchange numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore your Toyota Corolla’s front-end appearance with this aftermarket front bumper cover replacement, designed specifically for 2014–2016 Toyota Corolla L, LE & LE Eco pre-facelift models. Constructed from durable automotive-grade impact-resistant plastic, this front bumper fascia shell features a primed black finish and is ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover. Suitable for collision repair, cosmetic restoration, and body shop replacement applications, this standalone fascia shell provides a clean foundation for professional refinishing and installation.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

Before You Order

Please verify your vehicle year, trim configuration, front bumper design, and reference numbers before purchasing. Compare the bumper shape, grille and bezel openings, mounting points, and reference numbers with your existing part to confirm compatibility. Designed specifically for 2014–2016 Toyota Corolla L, LE & LE Eco pre-facelift models. Not intended for other bumper or trim configurations.

What’s Not Included

This listing includes the front bumper cover fascia shell only. Upper and lower grille components, side inserts or bezels, trim moldings, brackets, retainers, reinforcement components, lighting parts, and mounting hardware are not included unless specifically stated in the package contents.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Corolla® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, interchange numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore your Toyota Camry’s rear exterior appearance with this aftermarket rear bumper cover replacement, designed specifically for 2021–2024 Toyota Camry LE & XLE facelift models. Constructed from durable automotive-grade impact-resistant plastic, this rear bumper fascia shell features a primed black finish and is ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover. Suitable for collision repair, cosmetic restoration, and body shop replacement applications, this standalone fascia shell provides a clean foundation for professional refinishing and installation.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

Before You Order

Please verify your vehicle year, trim configuration, rear bumper design, and reference numbers before purchasing. Compare the bumper shape, lower openings, reflector locations, mounting points, and reference numbers with your existing part to confirm compatibility. Designed specifically for 2021–2024 Toyota Camry LE & XLE facelift models. Does not fit SE or XSE bumper configurations.

What’s Not Included

This listing includes the rear bumper cover fascia shell only. Lower valance or garnish components, reflectors, brackets, retainers, reinforcement components, exhaust-related trim pieces, and mounting hardware are not included unless specifically stated in the package contents.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Camry® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, interchange numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore your Toyota Camry’s front-end appearance with this aftermarket front bumper cover replacement, designed specifically for 2021–2024 Toyota Camry LE & XLE facelift models. Constructed from durable automotive-grade impact-resistant plastic, this front bumper fascia shell features a primed black finish and is ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover. Suitable for collision repair, cosmetic restoration, and body shop replacement applications, this standalone fascia shell provides a clean foundation for professional refinishing and installation.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

Before You Order

Please verify your vehicle year, trim configuration, front bumper design, and reference numbers before purchasing. Compare the bumper shape, grille and bezel openings, mounting points, and reference numbers with your existing part to confirm compatibility. Designed specifically for 2021–2024 Toyota Camry LE & XLE facelift models. Does not fit SE or XSE bumper configurations.

What’s Not Included

This listing includes the front bumper cover fascia shell only. Upper and lower grille components, side inserts or bezels, trim moldings, brackets, retainers, reinforcement components, lighting parts, and mounting hardware are not included unless specifically stated in the package contents.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Camry® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, interchange numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore your Toyota Camry’s rear exterior appearance with this aftermarket rear bumper cover replacement, designed specifically for 2021–2024 Toyota Camry SE & XSE facelift models. Constructed from durable automotive-grade impact-resistant plastic, this rear bumper fascia shell features a primed black finish and is ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover. Suitable for collision repair, cosmetic restoration, and body shop replacement applications, this standalone fascia shell provides a clean foundation for professional refinishing and installation

Reference Numbers 

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

Before You Order

Please verify your vehicle year, trim configuration, rear bumper design, and reference numbers before purchasing. Compare the bumper shape, lower openings, reflector locations, mounting points, and reference numbers with your existing part to confirm compatibility. Designed specifically for 2021–2024 Toyota Camry SE & XSE facelift configurations. Does not fit LE or XLE bumper configurations.

What’s Not Included

This listing includes the rear bumper cover fascia shell only. Lower valance or diffuser components, reflectors, garnish trim, brackets, retainers, reinforcement components, exhaust-related trim pieces, and mounting hardware are not included unless specifically stated in the package contents.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Camry® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, interchange numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore your Toyota Camry’s front-end appearance with this aftermarket front bumper cover replacement, designed specifically for 2021–2024 Toyota Camry SE & XSE facelift models. Constructed from durable automotive-grade impact-resistant plastic, this front bumper fascia shell features a primed black finish and is ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover. Suitable for collision repair, cosmetic restoration, and body shop replacement applications, this standalone fascia shell provides a clean foundation for professional refinishing and installation.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell
  

Before You Order

Please verify your vehicle year, trim configuration, front bumper design, and reference numbers before purchasing. Compare the bumper shape, grille and bezel openings, mounting points, and reference numbers with your existing part to confirm compatibility. Designed specifically for 2021–2024 Toyota Camry SE & XSE facelift configurations. Does not fit LE or XLE bumper configurations.

What’s Not Included

This listing includes the front bumper cover fascia shell only. Upper grille components, lower grille inserts, side or fog-light bezel components, trim moldings, brackets, retainers, reinforcement components, lighting parts, and mounting hardware are not included unless specifically stated in the package contents.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Camry® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, interchange numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore your Toyota Camry’s rear exterior appearance with this aftermarket rear bumper cover replacement, designed specifically for 2018–2020 Toyota Camry LE & XLE pre-facelift models. Constructed from durable automotive-grade impact-resistant plastic, this rear bumper fascia shell features a primed black finish and is ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

Before You Order

Please verify your vehicle year, trim configuration, rear bumper design, and reference numbers before purchasing. Designed specifically for 2018–2020 Toyota Camry LE & XLE pre-facelift models. Does not fit SE or XSE bumper configurations.

What’s Not Included

This listing includes the rear bumper cover fascia shell only. Lower valance or garnish components, reflectors, brackets, retainers, reinforcement components, mounting hardware, and other surrounding rear bumper accessories are not included unless specifically stated in the package contents.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Camry® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, interchange numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore your Toyota Camry’s rear exterior appearance with this aftermarket rear bumper cover replacement, designed specifically for 2018–2020 Toyota Camry SE & XSE pre-facelift models. Constructed from durable automotive-grade impact-resistant plastic, this rear bumper fascia shell features a primed black finish and is ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

Before You Order

Please verify your vehicle year, trim configuration, rear bumper design, and reference numbers before purchasing. Designed specifically for 2018–2020 Toyota Camry SE & XSE trims. Does not fit LE or XLE bumper configurations.

What’s Not Included

This listing includes the rear bumper cover fascia shell only. Lower valance or garnish components, reflectors, brackets, retainers, reinforcement components, and mounting hardware are not included unless specifically stated in the package contents.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Camry® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore your Toyota Camry’s front-end appearance with this aftermarket front bumper cover replacement, designed specifically for 2018–2020 Toyota Camry LE & XLE pre-facelift models. Constructed from durable automotive-grade impact-resistant plastic, this front bumper fascia shell features a primed black finish and is ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover. Suitable for collision repair, cosmetic restoration, and body shop replacement applications, this standalone fascia shell provides a clean foundation for professional refinishing and installation.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

Before You Order

Please verify your vehicle year, trim configuration, front bumper design, and reference numbers before purchasing. Compare the bumper shape, grille and bezel openings, mounting points, and reference numbers with your existing part to confirm compatibility. Designed specifically for 2018–2020 Toyota Camry LE & XLE pre-facelift models. Does not fit SE or XSE bumper configurations.

What’s Not Included

This listing includes the front bumper cover fascia shell only. Upper and lower grille components, side inserts or bezels, trim moldings, brackets, retainers, reinforcement components, lighting parts, and mounting hardware are not included unless specifically stated in the package contents.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Camry® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, interchange numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore your Toyota Camry’s front-end appearance with this aftermarket front bumper cover replacement, designed specifically for 2018–2020 Toyota Camry SE & XSE pre-facelift models. Constructed from durable automotive-grade impact-resistant plastic, this standalone fascia shell features a primed black finish and is ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

Before You Order

Please verify your vehicle year, trim configuration, front bumper design, and reference numbers before purchasing. Designed specifically for 2018–2020 Toyota Camry SE & XSE pre-facelift models. Does not fit LE or XLE bumper configurations.

What’s Not Included

This listing includes the front bumper cover fascia shell only. Upper and lower grilles, fog light bezels, trim moldings, brackets, retainers, reinforcement components, lighting parts, and mounting hardware are not included unless specifically stated in the package contents.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Camry® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore your Toyota Camry’s rear exterior appearance with this aftermarket rear bumper cover replacement, designed specifically for 2015–2017 Toyota Camry LE & XLE trim configurations. Constructed from durable automotive-grade impact-resistant plastic, this standalone fascia shell features a primed black, ready-to-paint finish and provides a practical replacement for a cracked, scraped, damaged, or collision-worn original bumper cover.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

Before You Order

Please verify your vehicle year, trim configuration, rear bumper design, and reference numbers before purchasing. Designed specifically for 2015–2017 Toyota Camry LE & XLE trims. Does not fit SE or XSE bumper configurations.

What’s Not Included

This listing includes the rear bumper cover fascia shell only. Lower valance components, reflectors, brackets, retainers, reinforcement components, and mounting hardware are not included unless specifically stated in the package contents.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Camry® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore your Toyota Camry’s rear exterior appearance with this aftermarket rear bumper cover replacement, designed specifically for 2015–2017 Toyota Camry SE & XSE trim configurations. Constructed from durable automotive-grade impact-resistant plastic, this standalone fascia shell features a primed black, ready-to-paint finish and provides a practical replacement for a cracked, scraped, damaged, or collision-worn original bumper cover.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

Before You Order

Please verify your vehicle year, trim configuration, rear bumper design, and reference numbers before purchasing. Designed specifically for 2015–2017 Toyota Camry SE & XSE trims. Does not fit LE or XLE bumper configurations.

What’s Not Included

This listing includes the rear bumper cover fascia shell only. Lower valance components, reflectors, brackets, retainers, reinforcement components, and mounting hardware are not included unless specifically stated in the package contents.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Camry® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore your Toyota Camry’s front-end appearance with this aftermarket front bumper cover replacement, designed specifically for 2015–2017 Toyota Camry LE & XLE trim configurations. Constructed from durable automotive-grade impact-resistant plastic, this standalone fascia shell features a primed black, ready-to-paint finish and is ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

Before You Order

Please verify your vehicle year, trim configuration, front bumper design, and reference numbers before purchasing. Designed specifically for 2015–2017 Toyota Camry LE & XLE trims. Does not fit SE or XSE bumper configurations.

What’s Not Included

This listing includes the front bumper cover fascia shell only. Grilles, trim moldings, brackets, retainers, reinforcement components, lighting parts, and mounting hardware are not included unless specifically stated in the package contents.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation.Toyota® and Camry® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore your Toyota Camry’s front exterior appearance with this aftermarket front bumper cover replacement, designed specifically for 2015–2017 Toyota Camry SE & XSE trim configurations. Constructed from durable automotive-grade impact-resistant plastic, this standalone fascia shell features a primed black, ready-to-paint finish. Ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

Before You Order

Please verify your vehicle year, trim configuration, front bumper design, and reference numbers before purchasing. Designed specifically for 2015–2017 Toyota Camry SE & XSE trims. Does not fit LE or XLE bumper configurations.

What’s Not Included

This listing includes the front bumper cover fascia shell only. Grilles, trim moldings, brackets, retainers, reinforcement components, lighting parts, mounting hardware, and other surrounding bumper accessories are not included unless specifically stated in the package contents.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Camry® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore your Toyota Camry’s rear exterior appearance with this aftermarket rear bumper cover replacement, designed specifically for 2012–2014 Toyota Camry Standard LE & Luxury XLE trim configurations. Constructed from durable automotive-grade impact-resistant plastic, this standalone fascia shell features a primed finish ready for professional preparation, painting, and color matching. Ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

What’s Not Included

This listing includes the rear bumper cover fascia shell only. Lower valance components, reflectors, brackets, retainers, reinforcement components, mounting hardware, and other surrounding bumper accessories are not included unless specifically stated in the package contents.

Before You Order

Please verify your vehicle year, trim configuration, rear bumper design, and reference numbers before purchasing. Designed specifically for 2012–2014 Toyota Camry Standard LE & Luxury XLE trims. Does not fit High-End SE or Sport bumper configurations.

Paint & Installation Notice

This bumper cover is supplied in a primed, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Camry® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore your Toyota Camry’s rear exterior appearance with this aftermarket rear bumper cover replacement, designed specifically for 2012–2014 Toyota Camry High-End SE & Sport trim configurations. Constructed from durable automotive-grade impact-resistant plastic, this standalone rear fascia shell features a primed black ready-to-paint finish and is ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

What’s Not Included

This listing includes the rear bumper cover fascia shell only. Lower valance components, reflectors, mounting brackets, retainers, reinforcement components, installation hardware, and other surrounding bumper accessories are not included unless specifically stated in the package contents.

Before You Order

Please verify your vehicle year, trim configuration, rear bumper design, and reference numbers before purchasing. This rear bumper cover is designed specifically for 2012–2014 Toyota Camry High-End SE & Sport trims and does not fit Standard LE or Luxury XLE bumper configurations.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, temporary flexing or minor shape variation may occur during shipping. Allow the bumper cover to rest at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Camry® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore your Toyota Camry’s front-end appearance with this aftermarket front bumper cover replacement, designed specifically for 2012–2014 Toyota Camry Standard LE & Luxury XLE trim configurations. Constructed from durable automotive-grade impact-resistant plastic, this standalone fascia shell is supplied in a primed finish ready for professional preparation, painting, and color matching. Ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

What’s Not Included

This listing includes the front bumper cover fascia shell only. Grilles, trim moldings, brackets, retainers, reinforcement components, lighting parts, emblems, mounting hardware, and other surrounding bumper accessories are not included unless specifically stated in the package contents.

Before You Order

Please verify your vehicle year, trim configuration, bumper design, and reference numbers before purchasing. This bumper cover is designed specifically for 2012–2014 Toyota Camry Standard LE & Luxury XLE trims and does not fit High-End SE or Sport bumper configurations.

Paint & Installation Notice

This bumper cover is supplied in a primed, unpainted finish and requires surface preparation and painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, temporary flexing or minor shape variation may occur during shipping. Allow the bumper cover to rest at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Camry® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore the front-end appearance of your Toyota Camry with this premium aftermarket front bumper cover replacement, designed specifically for 2012–2014 Toyota Camry High-End SE & Sport trim configurations. Manufactured from durable automotive-grade impact-resistant plastic, this bumper fascia comes in a primed black ready-to-paint finish, providing a clean surface for professional color matching before installation. Ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover, this standalone fascia shell helps restore the vehicle’s clean factory-inspired front-end appearance.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

What’s Not Included

This listing includes the front bumper cover fascia shell only. Grilles, trim moldings, brackets, retainers, reinforcement components, lighting parts, emblems, mounting hardware, and other surrounding bumper accessories are not included unless specifically stated in the package contents.

Before You Order

Please verify your vehicle year, trim configuration, bumper design, and reference numbers before purchasing. This bumper cover is designed specifically for 2012–2014 Toyota Camry High-End SE & Sport trims and is not intended for Standard LE or Luxury XLE bumper configurations.

Paint & Installation Notice

This bumper cover is supplied in a primed, unpainted finish and requires surface preparation and painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, the part may be packaged in a space-efficient manner for shipping. Minor temporary flexing or shape variation may occur during transit. Allow the bumper cover to rest at room temperature before test-fitting and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Camry® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Restore Your Tacoma with a Complete Rear Step Bumper

A damaged rear bumper can affect both the appearance of your Tacoma and its everyday functionality. Whether your truck has been involved in a rear-end collision, suffered damage from daily use, or simply needs a replacement for a worn or rusted bumper, this OE-style Rear Step Bumper provides a dependable solution that restores both appearance and performance. Designed for 2016–2023 Toyota Tacoma models originally equipped with factory parking sensors, this complete rear step bumper delivers factory-style fitment and dependable durability while maintaining compatibility with your vehicle's original parking sensor system.

Complete Replacement for Everyday Repairs

Replacing the entire rear step bumper is often the most efficient way to restore your truck while ensuring proper fit and alignment. As a complete OE-style replacement, this rear step bumper helps return your Tacoma to its original appearance without the need to source multiple individual components. Whether you're repairing collision damage, replacing a damaged bumper, or restoring your truck, this rear step bumper offers a practical and reliable replacement solution.

Is This the Right Rear Step Bumper?

Toyota Tacoma rear step bumpers were produced in different factory configurations. This version is intended for vehicles originally equipped with factory parking sensors. Before ordering, compare your existing rear bumper with the product photos and verify your original bumper configuration to ensure you're selecting the correct replacement.

Common Replacement Scenarios

This rear step bumper is commonly selected for:

• Rear-end collision repairs

• Bent or damaged rear bumpers

• Rust or corrosion replacement

• Insurance claim repairs

• Vehicle restoration projects

• General rear bumper replacement

Replacing the complete rear bumper helps restore both the appearance and everyday usability of your Tacoma.

Important Information

• Professional installation is recommended for proper fitment and alignment.

• Verify your vehicle's original rear bumper configuration before placing your order.

• This version is designed for vehicles originally equipped with factory parking sensors.

FAQS

1. Is this rear bumper compatible with factory parking sensors?

Yes. This version is designed for 2016–2023 Toyota Tacoma models originally equipped with factory parking sensors, allowing the original parking sensor system to be retained.

2. Is this a complete rear step bumper?

Yes. This product is sold as a complete Rear Step Bumper. Please refer to the product images and specifications for additional product details.

3. Does this bumper come with all installation hardware?

Package contents may vary depending on the manufacturer or production batch. Please review the product images and specifications for complete details before ordering.

4. How do I confirm this is the correct rear bumper?

Compare your existing rear bumper with the product photos and verify that your vehicle was originally equipped with factory parking sensors before placing your order.

Compatibility Disclaimer

Toyota® and Tacoma® are registered trademarks of Toyota Motor Corporation. VELNOX Auto is not affiliated with or endorsed by Toyota Motor Corporation. Vehicle names are used solely to identify product compatibility.