Replacement Parts

Product Overview

This Front Bumper Right Passenger Side Support Retainer Bracket is designed as a vehicle-specific replacement for the specified 2012-2014 Toyota Camry LE and XLE Sedan configuration. Installed at the front right bumper-to-fender mounting area, this bracket helps support the bumper cover edge, maintain proper positioning, and restore a secure mounting point when the original retainer is cracked, broken, damaged, or missing.

This listing is for ONE Right / Passenger Side (RH) bracket only.

Critical Fitment & Hardware Configuration Notice

This bracket is specifically configured for the Right / Passenger Side (RH) and uses the short-spec fender edge support guide retainer design. Bumper support retainers may vary by trim level, mounting-point layout, production configuration, and installation side. Before purchase, compare the replacement bracket with the original part and confirm:

• Right / Passenger Side mounting position

• Overall bracket shape

• Mounting-hole locations

• Retaining tabs and guide points

• Part number references

Part Number References

Package Includes

1x Front Bumper Right Passenger Side Support Retainer Mounting Bracket

Right / Passenger Side / RH — 1 Piece

Key Features

• Designed for the front right / passenger-side bumper mounting position

• Helps restore proper bumper edge support and positioning

• Short-spec fender edge support guide retainer configuration

• Vehicle-specific replacement design

• Suitable for replacing a cracked, broken, damaged, or missing original retainer

• Designed to match the specified mounting configuration

Installation & Fitment Notice

Professional installation is recommended. Before installation, compare the replacement bracket directly with the original component to confirm the mounting pattern, bracket profile, retaining-tab locations, installation side, and part number references. Do not force installation if the bracket configuration does not match the original component.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd. 

Product Overview

This Front Bumper Left Driver Side Support Retainer Bracket is designed as a vehicle-specific replacement for the specified 2012-2014 Toyota Camry LE and XLE Sedan configuration. Installed at the front left bumper-to-fender mounting area, this bracket helps support the bumper cover edge, maintain proper positioning, and restore a secure mounting point when the original retainer is cracked, broken, damaged, or missing.

This listing is for ONE Left / Driver Side (LH) bracket only.

Critical Fitment & Hardware Configuration Notice

PLEASE VERIFY THE ORIGINAL BRACKET BEFORE ORDERING.

This bracket is specifically configured for the Left / Driver Side (LH) and uses the short-spec fender edge support guide retainer design. Bumper support retainers may vary by trim level, mounting-point layout, production configuration, and installation side. Before purchase, compare the replacement bracket with the original part and confirm:

• Left / Driver Side mounting position

• Overall bracket shape

• Mounting-hole locations

• Retaining tabs and guide points

• Part number references

Part Number References

Package Includes

1x Front Bumper Left Driver Side Support Retainer Mounting Bracket

Left / Driver Side / LH — 1 Piece

Key Features：

• Designed for the front left / driver-side bumper mounting position

• Helps restore proper bumper edge support and positioning

• Short-spec fender edge support guide retainer configuration

• Vehicle-specific replacement design

• Suitable for replacing a cracked, broken, damaged, or missing original retainer

• Designed to match the specified mounting configuration

Installation & Fitment Notice

Professional installation is recommended. Before installation, compare the replacement bracket directly with the original component to confirm the mounting pattern, bracket profile, retaining-tab locations, installation side, and part number references. Do not force installation if the bracket configuration does not match the original component.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd. 

Product Overview

Designed for 2021–2023 Nissan Rogue SL & Platinum models on the T33 platform, this aftermarket rear bumper cover is built around the high-trim 4-sensor rear fascia configuration. The shell is formed from durable automotive-grade exterior plastic and supplied in a paintable black finish for professional preparation and refinishing. Its four pre-molded parking sensor openings are intended to match the corresponding premium rear bumper layout, making it suitable for collision repair, cosmetic restoration, or replacement of a damaged original fascia.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

4-Sensor High-Trim Configuration

This bumper cover is intended for 2021–2023 Nissan Rogue SL & Platinum T33 models using the corresponding 4-sensor rear bumper layout. Before ordering, compare the sensor-hole count and placement, rear fascia contour, reflector areas, mounting locations, and overall bumper shape with your original part. Standard S/SV non-sensor configurations use a different rear fascia and should not be treated as interchangeable.

Components Not Included

This listing includes the rear bumper cover shell only. Parking sensors, sensor retainers or brackets, reflectors, reinforcement components, mounting hardware, and other surrounding rear bumper parts are not included unless specifically stated in the package contents.

Refinishing & Installation

The bumper cover is supplied in a paintable black finish intended for professional surface preparation and refinishing. Test-fit the fascia before painting to verify the sensor openings, reflector areas, rear corner alignment, quarter-panel fitment, and mounting locations. Professional body-shop refinishing and installation are recommended.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. Nissan® and Rogue® are registered trademarks of Nissan Motor Co., Ltd. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, sensor configuration, and existing components before purchase.

Product Overview

Built for 2021–2023 Nissan Rogue S & SV models on the T33 platform, this aftermarket rear bumper cover matches the corresponding smooth non-sensor rear fascia configuration used on the standard trim layout. The shell is made from durable automotive-grade exterior plastic and supplied in a paintable black finish for professional preparation and refinishing. Its clean sensor-free rear profile makes it suitable for replacing an original bumper affected by cracking, scraping, deformation, collision damage, or previous body repair.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Trailing Armor Shield Shell

T33 Non-Sensor Rear Configuration

This bumper cover is intended for 2021–2023 Nissan Rogue S & SV T33 models using the smooth non-sensor rear bumper layout. Before ordering, compare the overall rear fascia profile, sensor-hole configuration, reflector areas, corner shape, mounting points, and reference numbers with your existing bumper. Sensor-equipped or higher-trim rear bumper configurations may use a different fascia design.

What’s Not Included

This listing includes the rear bumper cover shell only. Parking sensors, sensor brackets, reflectors, reinforcement components, retainers, mounting hardware, and other surrounding rear bumper parts are not included unless specifically stated in the package contents.

Finish & Installation

The bumper cover is supplied in a paintable black finish intended for professional surface preparation and refinishing. Test-fit the fascia before painting to verify alignment around the rear corners, reflector areas, quarter-panel edges, and mounting locations. Professional body-shop refinishing and installation are recommended.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. Nissan® and Rogue® are registered trademarks of Nissan Motor Co., Ltd. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, rear bumper configuration, and existing components before purchase.

Product Description

This Rear Bumper Cover Replacement is designed for 2020-2023 Nissan Sentra SR and SR Premium Trims Only with the 8th Gen B18 platform and pre-molded lower spoiler valance shark-fin diffuser slot configuration. The bumper cover serves as the exterior rear fascia shell and is suitable for replacing a cracked, scraped, deformed, or collision-damaged original rear bumper cover. Its molded profile is designed to correspond with the wider sport-oriented SR rear fascia, lower valance area, and surrounding mounting locations. This listing includes the standalone rear bumper cover shell only – NI1100336 / OEM: 85022-6LB5H, manufactured from polypropylene (PP) and supplied in primed black for proper paint preparation and refinishing.

Interchange Part Numbers

Please compare your vehicle trim, rear bumper configuration, lower diffuser layout, and reference numbers with the information below before ordering.

Key Features

• Standalone 1-piece rear bumper cover replacement shell

• Designed for 2020-2023 Nissan Sentra SR and SR Premium trims

• 8th Gen B18 platform sport rear fascia configuration

• Pre-molded lower spoiler valance shark-fin diffuser slots

• Polypropylene (PP) construction

• Primed black surface ready for proper paint preparation and refinishing

• Molded profile for the corresponding SR rear-body and lower valance layout

• Suitable for collision repair, exterior restoration, and damaged bumper replacement

Technical Fitment Notes

This rear bumper cover is intended specifically for the 2020-2023 Nissan Sentra 8th Gen B18 platform SR and SR Premium configuration. The lower portion of the fascia incorporates the corresponding pre-molded shark-fin diffuser and lower spoiler valance slots used with the SR-style rear bumper layout. These molded openings are an important configuration detail when comparing this replacement shell with the existing rear bumper cover. Important: This bumper cover is intended for the SR / SR Premium configuration only. It should not be treated as interchangeable with the standard S or SV rear bumper configuration, which uses a different smooth lower fascia layout without the corresponding sport diffuser slots. This 8th Gen B18 rear fascia configuration should also not be treated as interchangeable with earlier-generation 2013-2019 Sentra rear bumper designs. When matched to the correct vehicle, trim, and bumper configuration, this cover is designed as a direct replacement-style exterior body component for the corresponding mounting locations.

Package Includes

• 1 × Rear Bumper Cover Face Shell

Total: 1 Piece – Standalone Rear Bumper Cover Shell Only

Important Component Notice

This listing includes only the rear bumper cover shell specifically stated in the Package Includes section. Lower valance components, shark-fin diffuser pieces, spoilers, reflectors, trim pieces, sensors, sensor hardware, brackets, retainers, absorber components, reinforcement bars, exhaust trim components, fasteners, clips, and other surrounding parts are not included unless specifically stated otherwise. The bumper cover includes the described pre-molded lower diffuser and spoiler slots only. The separate lower spoiler, valance, diffuser components, and related hardware are not included unless specifically listed. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the Product Description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original rear bumper cover, vehicle trim, rear fascia configuration, lower diffuser slot layout, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the 2020-2023 Nissan Sentra SR and SR Premium 8th Gen B18 configuration with pre-molded lower spoiler valance shark-fin diffuser slots. It is not intended for the standard S or SV smooth lower rear fascia configuration. Please confirm your trim, existing bumper layout, and listed interchange numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. or Nissan North America, Inc. Nissan® and Sentra® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, lower valance or diffuser configuration, mounting points, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Overview

Engineered for 2021–2023 Nissan Rogue SL & Platinum models on the T33 platform, this aftermarket front bumper cover is built around the high-trim parking-sensor fascia configuration. Its sensor-ready layout is shaped for the corresponding premium front-end design, while the paintable black shell provides a clean base for professional refinishing. This makes it a suitable replacement for original bumpers with collision damage, cracks, deep scraping, deformation, or prior repair work.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

High-Trim Sensor Configuration

This fascia is intended for 2021–2023 Nissan Rogue SL & Platinum T33 models using the corresponding front parking-sensor bumper layout. Before ordering, compare the sensor-hole pattern, center opening design, side contours, mounting tabs, and overall fascia shape with the original bumper on your vehicle. Standard S/SV non-sensor versions use a different front bumper configuration and should not be treated as interchangeable.

Components Not Included

This listing includes the front bumper cover shell only. Parking sensors, sensor retainers or brackets, grille components, side inserts, lighting parts, reinforcement components, emblems, mounting hardware, and other surrounding front-end parts are not included unless specifically listed in the package contents.

Refinishing & Installation

The bumper cover is supplied in a paintable black finish intended for professional preparation and refinishing. Test-fit before painting to verify the sensor openings, grille alignment, fender-edge fitment, and mounting locations. Professional body-shop refinishing and installation are recommended for the best finished appearance.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. Nissan® and Rogue® are registered trademarks of Nissan Motor Co., Ltd. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, sensor configuration, and existing components before purchase.

Product Description

This Rear Bumper Cover Replacement is designed for 2020-2023 Nissan Sentra Standard Base S and SV Trims Only with the 8th Gen B18 platform and Non-SR smooth flush rear fascia configuration. The bumper cover serves as the exterior rear fascia shell and is suitable for replacing a cracked, scraped, dented, deformed, or collision-damaged original rear bumper cover. Its molded profile is designed to correspond with the specified B18 rear-body contours and surrounding mounting areas. This listing includes the standalone rear bumper cover shell only – NI1100335 / OEM: 85022-6LB0H, with a textured flat black specification.

Interchange Part Numbers

Please compare your vehicle trim, rear bumper configuration, and reference numbers with the information below before ordering.

Key Features

• Standalone 1-piece rear bumper cover replacement shell

• Designed for 2020-2023 Nissan Sentra Base S and SV trims

• 8th Gen B18 platform rear fascia configuration

• Non-SR smooth flush bumper design

• Textured flat black specification

• Molded profile for the corresponding rear-body and mounting layout

• Suitable for collision repair, exterior restoration, and damaged bumper replacement

Technical Fitment Notes

This rear bumper cover is intended specifically for the 2020-2023 Nissan Sentra 8th Gen B18 platform Standard Base S and SV configuration. The molded fascia profile is designed around the corresponding Non-SR rear-end layout, including the outer corner contours, lower fascia structure, and mounting locations. Important: This bumper cover is intended for the Non-SR configuration. It should not be treated as interchangeable with SR, SR Premium, or other rear fascia configurations that use different styling, openings, trim features, or mounting layouts. When matched to the correct vehicle, trim, and bumper configuration, this cover is designed as a direct replacement-style exterior body component for the corresponding mounting locations.

Package Includes

• 1 × Rear Bumper Cover Face Shell

Total: 1 Piece – Standalone Rear Bumper Cover Shell Only

Important Component Notice

This listing includes only the rear bumper cover shell specifically stated in the Package Includes section. Reflectors, trim pieces, sensors, sensor hardware, brackets, retainers, absorber components, reinforcement bars, exhaust trim components, fasteners, clips, and other surrounding parts are not included unless specifically stated otherwise. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the Product Description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original rear bumper cover, vehicle trim, rear fascia configuration, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the 2020-2023 Nissan Sentra Standard Base S and SV 8th Gen B18 Non-SR smooth flush configuration. Please confirm your vehicle trim, existing bumper layout, and listed interchange numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. or Nissan North America, Inc. Nissan® and Sentra® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, mounting points, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Description

This Front Bumper Cover Replacement is designed for 2020-2023 Nissan Sentra SR and SR Premium Trims Only with the 8th Gen B18 platform and pre-molded outer lower bumper wing lip spoiler cutout slots. The bumper cover serves as the exterior front fascia shell and is suitable for replacing a cracked, scraped, dented, deformed, or collision-damaged original front bumper cover. Its molded profile is designed to correspond with the specified SR front-end styling and lower spoiler cutout configuration. This listing includes the standalone front bumper cover shell only – NI1000340 / OEM: 62022-6LB5H, finished in primed black.

Interchange Part Numbers

Please compare your vehicle trim, front bumper configuration, lower spoiler layout, and reference numbers with the information below before ordering.

Key Features

• Standalone 1-piece front bumper cover replacement shell

• Designed for 2020-2023 Nissan Sentra SR and SR Premium trims

• 8th Gen B18 platform front fascia configuration

• Pre-molded outer lower bumper wing lip spoiler cutout slots

• Primed black surface ready for proper paint preparation and refinishing

• Molded profile for the corresponding SR front fascia and lower spoiler layout

• Suitable for collision repair, exterior restoration, and damaged bumper replacement

Technical Fitment Notes

This front bumper cover is intended specifically for the 2020-2023 Nissan Sentra 8th Gen B18 platform SR and SR Premium configuration. The molded fascia profile includes the corresponding outer lower bumper wing lip spoiler cutout slots as part of the front bumper design. These openings are an important configuration detail when comparing this replacement with the existing bumper cover. Important: This bumper cover is intended for the SR / SR Premium configuration and should not be treated as interchangeable with Base S, SV, or other front fascia configurations that use a smooth lower bumper layout without the corresponding spoiler cutout slots. When matched to the correct vehicle, trim, and bumper configuration, this cover is designed as a direct replacement-style exterior body component for the corresponding mounting locations.

Package Includes

• 1 × Front Bumper Cover Face Shell

Total: 1 Piece – Standalone Front Bumper Cover Shell Only

Important Component Notice

This listing includes only the front bumper cover shell specifically stated in the Package Includes section. Lower wing lip spoilers, trim pieces, grille components, emblems, sensors, brackets, retainers, absorber components, reinforcement bars, fog light components, fasteners, clips, and other surrounding parts are not included unless specifically stated otherwise. The bumper cover includes the described pre-molded spoiler cutout slots only. The spoiler or lip components themselves are not included unless specifically listed. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the Product Description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original front bumper cover, vehicle trim, front fascia configuration, lower spoiler cutout layout, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the 2020-2023 Nissan Sentra SR and SR Premium 8th Gen B18 configuration with pre-molded outer lower bumper wing lip spoiler cutout slots. Please confirm these features and the listed interchange numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. or Nissan North America, Inc. Nissan® and Sentra® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, mounting points, spoiler configuration, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Description

This Front Bumper Cover Replacement is designed for 2020-2023 Nissan Sentra Standard Base S and SV Trims Only with the 8th Gen B18 platform and Non-SR smooth flush flat black front fascia configuration. The bumper cover serves as the exterior front fascia shell and is suitable for replacing a cracked, scraped, dented, deformed, or collision-damaged original front bumper cover. Its molded profile is designed to correspond with the specified B18 front-end contours, grille opening, and surrounding mounting areas. This listing includes the standalone front bumper cover shell only – NI1000339 / OEM: 62022-6LB0H, with the specified flat black nose configuration.

Interchange Part Numbers

Please compare your vehicle trim, front bumper configuration, and reference numbers with the information below before ordering.

Key Features

• Standalone 1-piece front bumper cover replacement shell

• Designed for 2020-2023 Nissan Sentra Base S and SV trims

• 8th Gen B18 platform front fascia configuration

• Non-SR smooth flush bumper design

• Flat black nose specification

• Molded profile for the corresponding grille opening and front-body layout

• Suitable for collision repair, exterior restoration, and damaged bumper replacement

Technical Fitment Notes

This front bumper cover is intended specifically for the 2020-2023 Nissan Sentra 8th Gen B18 platform Standard Base S and SV configuration. The molded fascia profile is designed around the corresponding smooth flush front-end layout, including the grille opening, front corner contours, lower fascia structure, and mounting locations. Important: This bumper cover is intended for the Non-SR configuration. It should not be treated as interchangeable with SR or other front fascia configurations that use different styling, openings, mounting profiles, or surrounding components. When matched to the correct vehicle, trim, and bumper configuration, this cover is designed as a direct replacement-style exterior body component for the corresponding mounting locations.

Package Includes

• 1 × Front Bumper Cover Face Shell

Total: 1 Piece – Standalone Front Bumper Cover Shell Only

Important Component Notice

This listing includes only the front bumper cover shell specifically stated in the Package Includes section. Grilles, grille inserts, trim pieces, emblems, sensors, sensor hardware, brackets, retainers, absorber components, reinforcement bars, fog light components, fasteners, clips, and other surrounding parts are not included unless specifically stated otherwise. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the Product Description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original front bumper cover, vehicle trim, front fascia configuration, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the 2020-2023 Nissan Sentra Standard Base S and SV 8th Gen B18 Non-SR smooth flush configuration. Please confirm your vehicle trim, existing bumper layout, and listed interchange numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. or Nissan North America, Inc. Nissan® and Sentra® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, mounting points, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Description

This Rear Bumper Cover Replacement is designed for 2016-2019 Nissan Sentra SL, Nismo, Premium, and SR Trims Only with the 7th Gen post-facelift rear-end configuration and pre-molded 4 backup radar sensor holes. The bumper cover serves as the exterior rear fascia shell and is suitable for replacing a cracked, scraped, dented, deformed, or collision-damaged original rear bumper cover. Its molded profile is designed to correspond with the specified post-facelift rear-body contours while retaining the required sensor-hole configuration. This listing includes the standalone rear bumper cover shell only – NI1100312 / OEM: 62022-4FU1H, finished in primed black.

Interchange Part Numbers

Please compare your vehicle trim, rear bumper configuration, sensor layout, and reference numbers with the information below before ordering.

Key Features

• Standalone 1-piece rear bumper cover replacement shell

• Designed for 2016-2019 Nissan Sentra SL, Nismo, Premium, and SR trims

• 7th Gen post-facelift rear fascia configuration

• Pre-molded with 4 backup radar sensor holes

• Primed black surface ready for proper paint preparation and refinishing

• Molded profile for the corresponding rear-body and mounting layout

• Suitable for collision repair, exterior restoration, and damaged bumper replacement

Technical Fitment Notes

This rear bumper cover is intended specifically for the 2016-2019 Nissan Sentra 7th Gen post-facelift SL, Nismo, Premium, and SR configuration. The molded fascia profile incorporates 4 pre-molded backup radar sensor holes as part of the bumper shell design. These openings are an important configuration detail when comparing this replacement with the existing rear bumper cover. Important: This bumper cover is intended for vehicles equipped with the corresponding 4 backup radar sensor hole configuration. It should not be treated as interchangeable with a smooth non-sensor bumper cover or another rear fascia configuration that uses a different sensor-hole or mounting layout. When matched to the correct vehicle, trim, and bumper configuration, this cover is designed as a direct replacement-style exterior body component for the corresponding mounting locations.

Package Includes

• 1 × Rear Bumper Cover Face Shell

Total: 1 Piece – Standalone Rear Bumper Cover Shell Only

Important Component Notice

This listing includes only the rear bumper cover shell specifically stated in the Package Includes section. Backup radar sensors, sensor hardware, trim pieces, reflectors, brackets, retainers, absorber components, reinforcement bars, exhaust trim components, fasteners, clips, and other surrounding parts are not included unless specifically stated otherwise. The bumper cover includes the described 4 pre-molded backup radar sensor holes only. Electronic sensors and related hardware are not included. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the Product Description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original rear bumper cover, vehicle trim, rear fascia configuration, backup sensor layout, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the 2016-2019 Nissan Sentra SL, Nismo, Premium, and SR 7th Gen post-facelift configuration with 4 backup radar sensor holes. Please confirm these features and the listed interchange numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. or Nissan North America, Inc. Nissan® and Sentra® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, sensor configuration, mounting points, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Description

This Front Bumper Cover Replacement is designed for 2019-2022 Nissan Altima Limited, SL, and Platinum Trims Only with the 6th Gen pre-facelift front-end configuration and pre-molded 2 intelligent front parking radar sensor holes. The bumper cover serves as the exterior front fascia shell and is suitable for replacing a cracked, scraped, dented, deformed, or collision-damaged original bumper cover. Its molded profile is designed to correspond with the specified pre-facelift front-end layout while retaining the required sensor-hole configuration. This listing includes the standalone front bumper cover shell only – NI1000373 / OEM: 62022-6CA1H, finished in primed black.

Interchange Part Numbers

Please compare your vehicle trim, front bumper configuration, sensor layout, and reference numbers with the information below before ordering.

Key Features

• Standalone 1-piece front bumper cover replacement shell

• Designed for 2019-2022 Nissan Altima Limited, SL, and Platinum trims

• 6th Gen pre-facelift front fascia configuration

• Pre-molded with 2 front parking radar sensor holes

• Primed black surface ready for proper paint preparation and refinishing

• Molded profile for the corresponding front bumper and surrounding mounting layout

• Suitable for collision repair, exterior restoration, and damaged bumper replacement

Technical Fitment Notes

This front bumper cover is intended specifically for the 2019-2022 Nissan Altima 6th Gen pre-facelift Limited, SL, and Platinum configuration. The molded fascia profile incorporates 2 pre-molded front parking radar sensor holes as part of the bumper shell design. These openings are an important configuration detail when comparing this replacement with the existing front bumper cover. Important: This bumper cover is intended for vehicles equipped with the corresponding 2 front parking radar sensor hole configuration. It should not be treated as interchangeable with a smooth non-sensor bumper cover or another fascia configuration that uses a different sensor-hole or mounting layout. When matched to the correct vehicle and bumper configuration, this cover is designed as a direct replacement-style exterior body component for the corresponding mounting locations.

Package Includes

• 1 × Front Bumper Cover Face Shell

Total: 1 Piece – Standalone Front Bumper Cover Shell Only

Important Component Notice

This listing includes only the front bumper cover shell specifically stated in the Package Includes section. Parking radar sensors, sensor hardware, grilles, grille inserts, trim pieces, emblems, brackets, retainers, absorber components, reinforcement bars, fog light components, fasteners, clips, and other surrounding parts are not included unless specifically stated otherwise. The bumper cover includes the described 2 pre-molded front parking radar sensor holes only. Electronic sensors and related hardware are not included. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the Product Description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original bumper cover, vehicle trim, front fascia configuration, parking sensor layout, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the 2019-2022 Nissan Altima Limited, SL, and Platinum 6th Gen pre-facelift configuration with 2 front parking radar sensor holes. Please confirm these features and the listed interchange numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. or Nissan North America, Inc. Nissan® and Altima® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, sensor configuration, mounting points, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Description

This Front Bumper Cover Replacement is designed for 2019-2022 Nissan Altima Standard S, SR, and SV Trims Only with the 6th Gen pre-facelift front-end configuration and flush smooth non-sensor Giant V-Motion bumper layout. The bumper cover serves as the exterior front fascia shell and is suitable for replacing a cracked, scraped, dented, deformed, or collision-damaged original bumper cover. Its molded profile is designed to correspond with the specified pre-facelift front-end contours, grille opening, and surrounding mounting areas. This listing includes the standalone front bumper cover shell only – NI1000366 / OEM: 62022-6CA0H, finished in primed black.

Interchange Part Numbers

Please compare your vehicle trim, front bumper configuration, sensor layout, and reference numbers with the information below before ordering.

Key Features

• Standalone 1-piece front bumper cover replacement shell

• Designed for 2019-2022 Nissan Altima S, SR, and SV trims

• 6th Gen pre-facelift front fascia configuration

• Flush smooth non-sensor bumper layout

• Giant V-Motion front grille profile

• Primed black surface ready for proper paint preparation and refinishing

• Suitable for collision repair, exterior restoration, and damaged bumper replacement

Technical Fitment Notes

This front bumper cover is intended specifically for the 2019-2022 Nissan Altima 6th Gen pre-facelift configuration. The molded fascia profile is designed around the corresponding pre-facelift front-end layout, including the Giant V-Motion grille opening, headlight-side contours, lower fascia structure, and mounting locations. Important: This bumper cover is intended for the flush smooth non-sensor configuration. It should not be treated as interchangeable with bumper covers that use factory-molded parking sensor openings or other front fascia configurations with different openings or mounting layouts. This component is intended for the 2019-2022 pre-facelift design. Please verify the vehicle year, trim, bumper configuration, and existing mounting layout before ordering. When matched to the correct vehicle and bumper configuration, this cover is designed as a direct replacement-style exterior body component for the corresponding mounting locations.

Package Includes

• 1 × Front Bumper Cover Face Shell

Total: 1 Piece – Standalone Front Bumper Cover Shell Only

Important Component Notice

This listing includes only the front bumper cover shell specifically stated in the Package Includes section. Grilles, grille inserts, trim pieces, emblems, parking sensors, sensor hardware, brackets, retainers, absorber components, reinforcement bars, fog light components, fasteners, clips, and other surrounding parts are not included unless specifically stated otherwise. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the Product Description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original bumper cover, vehicle trim, front fascia configuration, sensor layout, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the 2019-2022 Nissan Altima Standard S, SR, and SV 6th Gen pre-facelift smooth non-sensor configuration. Please confirm these features and the listed interchange numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. or Nissan North America, Inc. Nissan® and Altima® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, sensor configuration, mounting points, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Description

This Rear Bumper Cover Lower Replacement is designed for 2016-2018 Nissan Altima Limited Trims Only with the mid-cycle facelift rear-end configuration and pre-molded 4 backup radar sensor holes. This lower rear bumper cover helps restore the exterior lower fascia area after cracking, impact damage, deformation, or collision repair. Its molded profile is designed to correspond with the specified rear bumper configuration while retaining the required sensor-hole layout. This listing includes the standalone rear lower bumper cover only – NI1100294, finished in automotive-grade black.

Interchange Part Numbers

Please compare your vehicle trim, rear bumper configuration, sensor layout, and reference numbers with the information below before ordering.

Key Features

• Standalone rear lower bumper cover replacement

• Designed for 2016-2018 Nissan Altima Limited trims

• Mid-cycle facelift rear fascia configuration

• Pre-molded with 4 backup radar sensor holes

• Black exterior finish

• Molded profile for the corresponding rear bumper layout

• Suitable for collision repair, exterior restoration, and damaged lower bumper replacement

Technical Fitment Notes

This rear lower bumper cover is intended specifically for the 2016-2018 Nissan Altima Limited mid-cycle facelift configuration. The molded lower fascia profile incorporates 4 pre-molded backup radar sensor holes as part of the bumper design. These openings are an important configuration detail when comparing this replacement with the existing rear bumper component. Important: This component is intended for vehicles equipped with the corresponding 4 backup radar sensor hole configuration. It should not be treated as interchangeable with a smooth non-sensor lower bumper cover or another rear fascia configuration that uses a different sensor-hole or mounting layout. When matched to the correct vehicle and bumper configuration, this lower cover is designed as a direct replacement-style exterior body component for the corresponding mounting locations.

Package Includes

• 1 × Rear Bumper Cover Lower

Total: 1 Piece – Standalone Rear Lower Bumper Cover Only

Important Component Notice

This listing includes only the rear lower bumper cover specifically stated in the Package Includes section. Backup radar sensors, sensor hardware, upper bumper cover, trim pieces, reflectors, brackets, retainers, absorber components, reinforcement bars, fasteners, clips, and other surrounding parts are not included unless specifically stated otherwise. The component includes the described pre-molded 4 backup radar sensor holes only. Electronic sensors and related hardware are not included. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the Product Description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original rear bumper component, vehicle trim, fascia configuration, sensor-hole layout, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the 2016-2018 Nissan Altima Limited mid-cycle facelift configuration with 4 backup radar sensor holes. Please confirm these features and the listed interchange numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. or Nissan North America, Inc. Nissan® and Altima® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, sensor configuration, mounting points, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Description

This Rear Bumper Cover Replacement is designed for 2016-2018 Nissan Altima Base S, SR, SV, and SL Trims Only with the mid-cycle facelift rear-end configuration and smooth non-sensor panel layout. The bumper cover serves as the exterior rear fascia shell and is suitable for replacing a cracked, scraped, dented, deformed, or collision-damaged original rear bumper cover. Its molded profile is designed to correspond with the specified facelift rear-body contours and surrounding mounting areas. This listing includes the standalone rear bumper cover shell only – NI1100293 / OEM: 85022-9HS0H, finished in primed black.

Interchange Part Numbers

Please compare your vehicle trim, rear bumper configuration, and reference numbers with the information below before ordering.

Key Features

• Standalone 1-piece rear bumper cover replacement shell

• Designed for 2016-2018 Nissan Altima mid-cycle facelift models

• Suitable for Base S, SR, SV, and SL trim applications

• Smooth non-sensor rear bumper configuration

• Molded fascia profile for the corresponding rear-body layout

• Primed black surface ready for proper paint preparation and refinishing

• Suitable for collision repair, exterior restoration, and damaged bumper replacement

Technical Fitment Notes

This rear bumper cover is intended specifically for the 2016-2018 Nissan Altima mid-cycle facelift configuration. The molded fascia profile is designed around the corresponding rear-end layout, including the outer corner contours, lower fascia structure, and mounting locations. Important: This bumper cover is intended for the smooth non-sensor configuration. It should not be treated as interchangeable with rear bumper covers that use factory-molded parking sensor openings or another fascia configuration with different openings or mounting points. When matched to the correct vehicle application and bumper configuration, this cover is designed as a direct replacement-style exterior body component for the corresponding mounting locations.

Package Includes

• 1 × Rear Bumper Cover Face Shell

Total: 1 Piece – Standalone Rear Bumper Cover Shell Only

Important Component Notice

This listing includes only the rear bumper cover shell specifically stated in the Package Includes section. Parking sensors, sensor hardware, trim pieces, reflectors, brackets, retainers, absorber components, reinforcement bars, exhaust trim components, fasteners, clips, and other surrounding parts are not included unless specifically stated otherwise. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the Product Description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original rear bumper cover, vehicle trim, fascia configuration, sensor layout, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the 2016-2018 Nissan Altima Base S, SR, SV, and SL mid-cycle facelift smooth non-sensor configuration. Please confirm your vehicle trim, existing bumper layout, and listed interchange numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. or Nissan North America, Inc. Nissan® and Altima® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, sensor configuration, mounting points, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Description

This Front Bumper Cover Replacement is designed for 2016-2018 Nissan Altima Limited/SL/Platinum Trims with the mid-cycle facelift front-end configuration, pre-molded 2 intelligent front parking radar sensor holes, and tow eye slot. The bumper cover serves as the exterior front fascia shell and is suitable for replacing a cracked, scraped, dented, deformed, or collision-damaged original bumper cover. Its molded profile is designed to correspond with the specified facelift front-end layout while retaining the required sensor openings and tow eye slot configuration. This listing includes the standalone front bumper cover shell only – NI1000306 / OEM: 52119-9HS0H Core Spec, finished in automotive-grade primed black.

Interchange Part Numbers

Please compare your vehicle trim, bumper configuration, sensor layout, and reference numbers with the information below before ordering.

Key Features

• Standalone 1-piece front bumper cover replacement shell

• Designed for 2016-2018 Nissan Altima Limited/SL/Platinum trims

• Mid-cycle facelift front fascia configuration

• Pre-molded with 2 front parking radar sensor holes

• Integrated tow eye slot configuration

• Automotive-grade primed black surface

• Molded profile for the corresponding bumper, grille, and surrounding mounting layout

• Suitable for collision repair, exterior restoration, and damaged bumper replacement

Technical Fitment Notes

This front bumper cover is intended specifically for the 2016-2018 Nissan Altima Limited/SL/Platinum mid-cycle facelift configuration. The fascia profile incorporates 2 pre-molded front parking radar sensor holes and a tow eye slot as part of the bumper shell design. These configuration details are important when comparing this replacement with the existing bumper on the vehicle. Important: This bumper cover is intended for Limited/SL/Platinum Trims with the corresponding 2 front parking radar sensor hole and tow eye slot configuration. It should not be treated as interchangeable with a smooth non-sensor bumper cover or another fascia configuration that uses a different opening or mounting layout. When matched to the correct vehicle and bumper configuration, this cover is designed as a direct replacement-style exterior body component for the corresponding mounting locations.

Package Includes

• 1 × Front Bumper Cover Face Shell

Total: 1 Piece – Standalone Front Bumper Cover Shell Only

Important Component Notice

This listing includes only the front bumper cover shell specifically stated in the Package Includes section. Parking radar sensors, sensor hardware, tow eye components, tow eye cover, grilles, grille inserts, trim pieces, emblems, brackets, retainers, absorber components, reinforcement bars, fog light components, fasteners, clips, and other surrounding parts are not included unless specifically stated otherwise. The bumper cover includes the described pre-molded sensor holes and tow eye slot only. Electronic sensors and related components are not included. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the Product Description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original bumper cover, vehicle trim, front fascia configuration, parking sensor layout, tow eye slot, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the 2016-2018 Nissan Altima Limited/SL/Platinum mid-cycle facelift configuration with 2 front parking radar sensor holes and tow eye slot. Please confirm these features and the listed interchange numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. or Nissan North America, Inc. Nissan® and Altima® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, sensor configuration, tow eye configuration, mounting points, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Description

This Front Bumper Cover Replacement is designed for 2016-2018 Nissan Altima Base S, SR, SV, and SL trims with the mid-cycle facelift front-end configuration and smooth non-sensor bumper layout. This bumper cover serves as the exterior front fascia shell and is suitable for replacing a cracked, scraped, dented, deformed, or collision-damaged original bumper cover. Its molded profile corresponds with the facelift grille opening, headlight-side contours, and surrounding mounting areas. This listing includes the standalone 1-piece front bumper cover shell only – NI1000305 / OEM: 52119-9HS0A Core Spec.

Interchange Part Numbers

Please compare your vehicle trim, bumper configuration, and reference numbers with the information below before ordering.

Key Features

• Standalone 1-piece front bumper cover replacement shell

• Designed for 2016-2018 Nissan Altima mid-cycle facelift models

• Suitable for Base S, SR, SV, and SL trim applications

• Smooth non-sensor front bumper configuration

• Molded fascia profile for the corresponding grille and headlight-side layout

• Primed black surface ready for proper paint preparation and refinishing

• Suitable for collision repair, exterior restoration, and damaged bumper replacement

Technical Fitment Notes

This front bumper cover is intended specifically for the 2016-2018 Nissan Altima mid-cycle facelift configuration. The molded fascia profile is designed around the corresponding facelift front-end layout, including the grille opening, headlight-side contours, lower fascia structure, and mounting locations. Important: This bumper cover is intended for the smooth non-sensor configuration. It should not be treated as interchangeable with bumper covers that are factory-molded with parking sensor openings or other different front fascia configurations. This component is also intended for the 2016-2018 facelift design and should not be treated as interchangeable with the earlier 2013-2015 pre-facelift front bumper configuration, which uses a different fascia shape and mounting layout. When matched to the correct vehicle application and bumper configuration, this cover is designed as a direct replacement-style body component for the corresponding mounting locations.

Package Includes

• 1 × Front Bumper Cover Face Shell

Total: 1 Piece – Standalone Front Bumper Cover Shell Only

Important Component Notice

This listing includes only the front bumper cover shell specifically stated in the Package Includes section. Grilles, grille inserts, trim pieces, emblems, parking sensors, sensor hardware, brackets, retainers, absorber components, reinforcement bars, fog light components, fasteners, clips, and other surrounding parts are not included unless specifically stated otherwise. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the Product Description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original bumper cover, vehicle trim, front fascia configuration, sensor layout, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the 2016-2018 mid-cycle facelift smooth non-sensor configuration. Please confirm your vehicle year, Base S / SR / SV / SL trim application, existing bumper layout, and corresponding reference number before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. or Nissan North America, Inc. Nissan® and Altima® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, sensor configuration, mounting points, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Description

This Rear Bumper Bracket Right Passenger Side Fender Support Guide is designed for 2017-2022 Honda CR-V (5th Gen Household Compact SUV All Models) and installs at the right-hand passenger-side rear bumper and quarter-edge mounting area. This quarter edge lock retainer clip plate helps support, guide, and secure the rear bumper cover along the passenger-side outer corner. It is suitable for replacing a guide bracket that is cracked, broken, loose, missing, or damaged during bumper removal, collision repair, or other rear-end repair work. This listing includes the Right Passenger Side (RH) single component only – HO1143125 / OEM: 71593-TNY-A01 Core Spec.

Interchange Part Numbers

Please compare the component and reference numbers below with your existing part before ordering.

Key Features

• Right Passenger Side (RH) rear bumper fender support guide

• Helps support and guide the rear bumper cover along the quarter edge

• Integrated retention points for the corresponding mounting location

• Suitable for replacing cracked, broken, loose, damaged, or missing bumper guides

• Useful for bumper replacement, collision repair, and rear-end restoration

• Single-component replacement for the corresponding RH mounting position

Technical Fitment Notes

This rear bumper fender support guide is intended specifically for the 2017-2022 5th Gen Honda CR-V configuration. The molded guide profile, snap-in retention points, and mounting locations are designed to correspond with the right-hand passenger-side rear bumper and quarter-edge mounting area, helping maintain proper positioning and support of the rear bumper cover. Important: This component is intended for the 2017-2022 5th Gen Honda CR-V framework and should not be treated as interchangeable with different vehicle platform or generation mounting layouts. Other applications may use different bumper support profiles, anchor locations, and retention points. When matched to the correct vehicle application and mounting configuration, this guide is designed as a direct replacement-style component without requiring cutting, drilling, or trimming.

Package Includes

• 1 × Rear Bumper Right Passenger Side Fender Support Guide

Total: 1 Piece – Right Passenger Side (RH) Only

Important Component Notice

This listing includes only the component specifically stated in the Package Includes section. The left-side guide and any additional hardware, fasteners, clips, screws, trim pieces, brackets, accessories, or surrounding components that are not specifically listed are not included. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the product description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original guide, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the Right Passenger Side (RH) component only. Please confirm the installation side, vehicle year, 5th Gen CR-V configuration, existing rear bumper mounting layout, and reference numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Honda Motor Co., Ltd. or American Honda Motor Co., Inc. Honda® and CR-V® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, mounting points, installation side, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Description

This Rear Bumper Bracket Left Driver Side Fender Support Guide is designed for 2017-2022 Honda CR-V (5th Gen Household Compact SUV All Models) and installs at the left-hand driver-side rear bumper and quarter-edge mounting area. This quarter edge lock retainer clip plate helps support, guide, and secure the rear bumper cover along the driver-side outer corner. It is suitable for replacing a guide bracket that is cracked, broken, loose, missing, or damaged during bumper removal, collision repair, or other rear-end repair work. This listing includes the Left Driver Side (LH) single component only – HO1142125 / OEM: 71598-TNY-A01 Core Spec.

Interchange Part Numbers

Please compare the component and reference numbers below with your existing part before ordering.

Key Features

• Left Driver Side (LH) rear bumper fender support guide

• Helps support and guide the rear bumper cover along the quarter edge

• Integrated retention points for the corresponding mounting location

• Suitable for replacing cracked, broken, loose, damaged, or missing bumper guides

• Useful for bumper replacement, collision repair, and rear-end restoration

• Single-component replacement for the corresponding LH mounting position

Technical Fitment Notes

This rear bumper fender support guide is intended specifically for the 2017-2022 5th Gen Honda CR-V configuration. The molded guide profile, snap-in retention points, and mounting locations are designed to correspond with the left-hand driver-side rear bumper and quarter-edge mounting area, helping maintain proper positioning and support of the rear bumper cover. Important: This component is intended for the 2017-2022 5th Gen Honda CR-V framework and should not be treated as interchangeable with different vehicle platform or generation mounting layouts. Other applications may use different bumper support profiles, anchor locations, and retention points. When matched to the correct vehicle application and mounting configuration, this guide is designed as a direct replacement-style component without requiring cutting, drilling, or trimming.

Package Includes

• 1 × Rear Bumper Left Driver Side Fender Support Guide

Total: 1 Piece – Left Driver Side (LH) Only

Important Component Notice

This listing includes only the component specifically stated in the Package Includes section. The right-side guide and any additional hardware, fasteners, clips, screws, trim pieces, brackets, accessories, or surrounding components that are not specifically listed are not included. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the product description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original guide, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the Left Driver Side (LH) component only. Please confirm the installation side, vehicle year, 5th Gen CR-V configuration, existing rear bumper mounting layout, and reference numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Honda Motor Co., Ltd. or American Honda Motor Co., Inc. Honda® and CR-V® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, mounting points, installation side, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Description

This Front Bumper Bracket Right Passenger Side Fender Support Guide is designed for 2017-2022 Honda CR-V (5th Gen Household Compact SUV All Models) and installs at the right-hand passenger-side front bumper and outer fender-edge mounting area. This outer edge lock retainer clip plate helps support, guide, and secure the front bumper cover along the passenger-side corner. It is suitable for replacing a guide bracket that is cracked, broken, loose, missing, or damaged during bumper removal, collision repair, or other front-end repair work. This listing includes the Right Passenger Side (RH) single component only – HO1043131 / OEM: 71193-TNY-A01 Core Spec.

Interchange Part Numbers

Please compare the component and reference numbers below with your existing part before ordering.

Key Features

• Right Passenger Side (RH) front bumper fender support guide

• Helps support and guide the front bumper cover along the outer fender edge

• Integrated retention points for the corresponding mounting location

• Suitable for replacing cracked, broken, loose, damaged, or missing bumper guides

• Useful for bumper replacement, collision repair, and front-end restoration

• Single-component replacement for the corresponding RH mounting position

Technical Fitment Notes

This front bumper fender support guide is intended specifically for the 2017-2022 5th Gen Honda CR-V configuration. The molded guide profile, snap-in retention points, and mounting locations are designed to correspond with the right-hand passenger-side front bumper and outer fender-edge mounting area, helping maintain proper positioning and support of the bumper cover. Important: This component is intended for the 2017-2022 5th Gen Honda CR-V framework and should not be treated as interchangeable with alternate Honda Accord mounting configurations. Different vehicle platforms may use different bumper support profiles, anchor locations, and mounting layouts. When matched to the correct vehicle application and mounting configuration, this guide is designed as a direct replacement-style component without requiring cutting, drilling, or trimming.

Package Includes

• 1 × Front Bumper Right Passenger Side Fender Support Guide

Total: 1 Piece – Right Passenger Side (RH) Only

Important Component Notice

This listing includes only the component specifically stated in the Package Includes section. The left-side guide and any additional hardware, fasteners, clips, screws, trim pieces, brackets, accessories, or surrounding components that are not specifically listed are not included. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the product description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original guide, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the Right Passenger Side (RH) component only. Please confirm the installation side, vehicle year, 5th Gen CR-V configuration, existing mounting layout, and reference numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Honda Motor Co., Ltd. or American Honda Motor Co., Inc. Honda® and CR-V® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, mounting points, installation side, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Description

This Front Bumper Bracket Left Driver Side Fender Support Guide is designed for 2017-2022 Honda CR-V (5th Gen Household Compact SUV All Models) and installs at the left-hand driver-side front bumper and outer fender-edge mounting area. This outer edge lock retainer clip plate helps support, guide, and secure the front bumper cover along the driver-side corner. It is suitable for replacing a guide bracket that is cracked, broken, loose, missing, or damaged during bumper removal, collision repair, or other front-end repair work. This listing includes the Left Driver Side (LH) single component only – HO1042131 / OEM: 71198-TNY-A01 Core Spec.

Interchange Part Numbers

Please compare the component and reference numbers below with your existing part before ordering.

Key Features

• Left Driver Side (LH) front bumper fender support guide

• Helps support and guide the front bumper cover along the outer fender edge

• Integrated retention points for the corresponding mounting location

• Suitable for replacing cracked, broken, loose, damaged, or missing bumper guides

• Useful for bumper replacement, collision repair, and front-end restoration

• Single-component replacement for the corresponding LH mounting position

Technical Fitment Notes

This front bumper fender support guide is intended specifically for the 2017-2022 5th Gen Honda CR-V configuration. The molded guide profile, snap-in retention points, and mounting locations are designed to correspond with the left-hand driver-side front bumper and outer fender-edge mounting area, helping maintain proper positioning and support of the bumper cover. Important: This component is intended for the 2017-2022 5th Gen Honda CR-V framework and should not be treated as interchangeable with alternate Honda Accord mounting configurations. Different vehicle platforms may use different bumper support profiles, anchor locations, and mounting layouts. When matched to the correct vehicle application and mounting configuration, this guide is designed as a direct replacement-style component without requiring cutting, drilling, or trimming.

Package Includes

• 1 × Front Bumper Left Driver Side Fender Support Guide

Total: 1 Piece – Left Driver Side (LH) Only

Important Component Notice

This listing includes only the component specifically stated in the Package Includes section. The right-side guide and any additional hardware, fasteners, clips, screws, trim pieces, brackets, accessories, or surrounding components that are not specifically listed are not included. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the product description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original guide, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the Left Driver Side (LH) component only. Please confirm the installation side, vehicle year, 5th Gen CR-V configuration, existing mounting layout, and reference numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Honda Motor Co., Ltd. or American Honda Motor Co., Inc. Honda® and CR-V® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, mounting points, installation side, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Description

This Front Bumper Bracket Left Driver Side Support Retainer Mounting Spacer is designed for 2016-2021 Honda Civic 4-Door Sedan (10th Gen Framework) and installs at the left-hand driver-side front bumper and fender edge mounting area. This support guide retainer helps secure and position the front bumper cover along the driver-side fender edge. It is suitable for replacing a bracket that is cracked, broken, loose, missing, or damaged during bumper removal, collision repair, or other front-end repair work. This listing includes the Left Driver Side (LH) single component only – HO1042134 / OEM: 71198-TBA-A01 Core Spec.

Interchange Part Numbers

Please compare the component and reference numbers below with your existing part before ordering.

Key Features

• Left Driver Side (LH) front bumper support retainer bracket

• Helps support and guide the front bumper cover along the fender edge

• Integrated retention points for the corresponding mounting location

• Suitable for replacing cracked, broken, loose, damaged, or missing retainers

• Useful for bumper replacement, collision repair, and front-end restoration

• Single-component replacement for the corresponding LH mounting position

Technical Fitment Notes

This front bumper support retainer guide bracket is intended specifically for the 2016-2021 10th Gen Honda Civic 4-Door Sedan configuration. The molded bracket profile, snap-in retention points, and mounting locations are designed to correspond with the left-hand driver-side fender edge and front bumper corner mounting area, helping maintain proper positioning and support of the bumper cover. Important: This component is intended for the 2016-2021 10th Gen framework and should not be treated as interchangeable with the earlier 2012-2015 9th Gen configuration. The earlier generation uses a different mounting and structural anchor layout. When matched to the correct vehicle application and mounting configuration, this bracket is designed as a direct replacement-style component without requiring cutting, drilling, or trimming.

Package Includes

• 1 × Front Bumper Left Driver Side Support Retainer Mounting Spacer

Total: 1 Piece – Left Driver Side (LH) Only

Important Component Notice

This listing includes only the component specifically stated in the Package Includes section. The right-side bracket and any additional hardware, fasteners, clips, screws, trim pieces, brackets, accessories, or surrounding components that are not specifically listed are not included. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the product description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original bracket, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the Left Driver Side (LH) component only. Please confirm the installation side, vehicle year, 10th Gen configuration, 4-door sedan body style, existing mounting layout, and reference numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Honda Motor Co., Ltd. or American Honda Motor Co., Inc. Honda® and Civic® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, body style, trim level, production configuration, mounting points, installation side, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Description

This Rear Bumper Bracket Right Passenger Side Support Retainer Mounting Spacer is designed for 2018-2020 Honda Accord (10th Gen Pre-Facelift Sedan All Trims Sport, EX, LX) and installs at the right-hand passenger-side rear bumper and fender-side mounting area. This support guide retainer plate helps secure and position the rear bumper cover along the passenger-side outer corner. It is suitable for replacing a bracket that is cracked, broken, loose, missing, or damaged during bumper removal, collision repair, or other rear-end repair work. This listing includes the Right Passenger Side (RH) single component only – HO1143118 / OEM: 71593-TVA-A01 Core Spec.

Interchange Part Numbers

Please compare the component and reference numbers below with your existing part before ordering.

Key Features

• Right Passenger Side (RH) rear bumper support retainer bracket

• Helps support and guide the rear bumper cover along the fender-side corner

• Integrated retention points for the corresponding mounting location

• Suitable for replacing cracked, broken, loose, damaged, or missing retainers

• Useful for bumper replacement, collision repair, and rear-end restoration

• Single-component replacement for the corresponding RH mounting position

Technical Fitment Notes

This rear bumper support retainer guide plate is intended specifically for the 2018-2020 pre-facelift 10th Gen Honda Accord configuration. The molded bracket profile, snap-in retention points, and mounting locations are designed to correspond with the right-hand passenger-side rear bumper and fender-side corner mounting area, helping maintain proper positioning and support of the rear bumper cover. Important: This component is intended for the 2018-2020 pre-facelift configuration and should not be treated as interchangeable with the 2021-2022 post-facelift configuration. The later models use a different rear bumper side mounting and anchor layout. When matched to the correct vehicle application and mounting configuration, this bracket is designed as a direct replacement-style component without requiring cutting, drilling, or trimming.

Package Includes

• 1 × Rear Bumper Right Passenger Side Support Retainer Mounting Spacer

Total: 1 Piece – Right Passenger Side (RH) Only

Important Component Notice

This listing includes only the component specifically stated in the Package Includes section. The left-side bracket and any additional hardware, fasteners, clips, screws, trim pieces, brackets, accessories, or surrounding components that are not specifically listed are not included. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the product description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original bracket, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the Right Passenger Side (RH) component only. Please confirm the installation side, vehicle year, pre-facelift configuration, existing rear bumper mounting layout, and reference numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Honda Motor Co., Ltd. or American Honda Motor Co., Inc. Honda® and Accord® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, mounting points, installation side, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Description

This Rear Bumper Bracket Left Driver Side Support Retainer Mounting Spacer is designed for 2018-2020 Honda Accord (10th Gen Pre-Facelift Sedan All Trims Sport, EX, LX) and installs at the left-hand driver-side rear bumper and fender-side mounting area. This support guide retainer plate helps secure and position the rear bumper cover along the driver-side outer corner. It is suitable for replacing a bracket that is cracked, broken, loose, missing, or damaged during bumper removal, collision repair, or other rear-end repair work. This listing includes the Left Driver Side (LH) single component only – HO1142118 / OEM: 71598-TVA-A01 Core Spec.

Interchange Part Numbers

Please compare the component and reference numbers below with your existing part before ordering.

Key Features

• Left Driver Side (LH) rear bumper support retainer bracket

• Helps support and guide the rear bumper cover along the fender-side corner

• Integrated retention points for the corresponding mounting location

• Suitable for replacing cracked, broken, loose, damaged, or missing retainers

• Useful for bumper replacement, collision repair, and rear-end restoration

• Single-component replacement for the corresponding LH mounting position

Technical Fitment Notes

This rear bumper support retainer guide plate is intended specifically for the 2018-2020 pre-facelift 10th Gen Honda Accord configuration. The molded bracket profile, retention points, and mounting locations are designed to correspond with the left-hand driver-side rear bumper and fender-side corner mounting area, helping maintain proper positioning and support of the rear bumper cover. Important: This component is intended for the 2018-2020 pre-facelift configuration and should not be treated as interchangeable with the 2021-2022 post-facelift configuration. The later models use a different rear bumper side mounting and anchor layout. When matched to the correct vehicle application and mounting configuration, this bracket is designed as a direct replacement-style component without requiring cutting, drilling, or trimming.

Package Includes

• 1 × Rear Bumper Left Driver Side Support Retainer Mounting Spacer

Total: 1 Piece – Left Driver Side (LH) Only

Important Component Notice

This listing includes only the component specifically stated in the Package Includes section. The right-side bracket and any additional hardware, fasteners, clips, screws, trim pieces, brackets, accessories, or surrounding components that are not specifically listed are not included. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the product description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original bracket, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the Left Driver Side (LH) component only. Please confirm the installation side, vehicle year, pre-facelift configuration, existing rear bumper mounting layout, and reference numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Honda Motor Co., Ltd. or American Honda Motor Co., Inc. Honda® and Accord® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, mounting points, installation side, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Overview

Restore major rear-end components with this 8-Piece Rear Bumper Restoration Bundle Kit, designed as an OE-style aftermarket solution for post-facelift Honda Civic Sedan applications. This coordinated package combines the rear bumper fascia with structural reinforcement, trunk garnish, lower valance, side mounting retainers, and rear corner bezel components for collision repair and rear-end restoration.

Package Includes

Product Highlights

• Complete rear-end restoration package

• Includes exterior, mounting, and structural bumper components

• OE-style contours and compatible mounting locations

• Designed for collision repair and rear-end rebuilding

Important Component Notice

Only the components specifically listed in the Package Includes table are included. Rear reflector lamps, parking sensors, sensor brackets, wiring, mounting clips, fasteners, and additional trim components are NOT included unless specifically stated. Compatible original components may be reused where applicable.

Paint & Installation Notice

The rear bumper cover is supplied primed and unpainted and requires professional surface preparation, color matching, and final paint before installation. Always test fit all components before painting, drilling, cutting, or permanent modification to verify alignment and mounting locations. Because this package includes a structural reinforcement beam and multiple mounting components, professional installation is recommended. Previous collision damage, distorted mounting points, worn retainers, or body alignment issues should be inspected and corrected before installation. Painted, installed, drilled, cut, damaged, or permanently modified products may not qualify for return under the VELNOX Auto Return Policy.

Folded Shipping & Unboxing Notice

Because of its flexible construction, the rear bumper cover may be professionally folded and securely packed inside a reinforced shipping carton to help reduce oversized-carrier shipping costs. Temporary bends, waves, creases, or packaging impressions may appear after unpacking and do not necessarily indicate permanent damage.

After unpacking:

1. Remove all protective packaging.

2. Place the bumper cover in a warm, clean area.

3. Allow sufficient time for the panel to recover its molded shape.

4. Apply low, controlled heat gradually and evenly only if necessary.

5. Confirm shape recovery before test fitting and paint preparation.

Avoid concentrated direct heat, open flame, or overheating, as excessive heat may damage the primer or permanently deform the panel.

Before Ordering

Compare the Partslink numbers, OEM reference numbers, Hollander numbers, rear fascia design, and mounting locations with the original vehicle components before purchase. Confirm that all components required beyond those listed in the package table are available for reuse or separate replacement.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda®, Accord®, LX®, Sport®, Touring®, and related names are registered trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Product Overview

Restore a damaged rear bumper with this OE-style Rear Bumper Cover Fascia Bare Shell, designed as a direct aftermarket replacement for collision repair and exterior restoration. Constructed from durable, flexible automotive-grade plastic, this replacement bumper cover follows the original-style rear body contour and compatible factory-style mounting locations. It is supplied in a primed, unpainted finish and requires professional surface preparation, color matching, and final paint before installation.

Package Includes

Product Highlights

• OE-style rear bumper replacement design

• Durable automotive-grade plastic construction

• Factory-style contour and compatible mounting locations

• Primed surface ready for professional paint preparation

• Suitable for replacing cracked, dented, scratched, or collision-damaged bumper covers

• Designed for reuse of compatible original trim and surrounding components where applicable

This listing includes the rear bumper cover main shell ONLY.

The following components are NOT included:

• Rear lower diffuser / lower bumper lip

• Left and right rear side reflectors

• Mounting brackets, retainers, clips, or hardware

• Additional rear bumper trim or accessories unless specifically stated

Compatible original components may be transferred from the existing bumper assembly when applicable or purchased separately as needed.

Paint & Installation Notice

This bumper cover is supplied primed and unpainted and requires professional surface preparation, color matching, and painting before final installation. Always test fit the bumper cover before painting, drilling, cutting, or making permanent modifications to confirm panel alignment and mounting locations. Previous collision damage, worn retainers, damaged brackets, or misaligned mounting areas may affect installation and should be inspected before fitting the replacement bumper cover. Professional body-shop preparation and installation are recommended. Painted, installed, drilled, cut, damaged, or permanently modified products may not qualify for return under the VELNOX Auto Return Policy.

Folded Shipping & Unboxing Notice

Due to the flexible construction of the bumper cover, the panel may be professionally folded and securely packed inside a reinforced shipping carton to help reduce oversized-carrier shipping costs and improve shipping efficiency. Temporary bends, waves, creases, or packaging impressions may be visible immediately after unpacking. These conditions are commonly caused by folded packaging and do not necessarily indicate permanent damage to the bumper cover.

After unpacking:

1. Remove all protective wrapping and packaging materials.

2. Place the bumper cover in a warm, clean, flat area.

3. Allow sufficient time for the flexible plastic panel to recover toward its original molded shape.

4. If necessary, apply low, controlled heat gradually and evenly to affected areas.

5. Confirm the panel has recovered properly and test fit before paint preparation or installation.

Avoid concentrated direct heat, open flame, or overheating. Excessive heat may damage the primer, distort mounting areas, or permanently deform the bumper cover.

Before Ordering, please compare the following with your original bumper before purchase:

• Partslink No.: HO1100288

• OEM Reference No.: 04715-TBG-A00ZZ

• Original bumper design and mounting locations

Confirm that you are purchasing the Bare Shell ONLY configuration and that any required lower diffuser, reflectors, brackets, retainers, clips, or hardware are available for reuse or separate replacement.

FAQs

1. Is this rear bumper cover already painted?

No. It is supplied in a primed, unpainted finish and requires professional surface preparation, color matching, and final paint.

2. Are the lower diffuser and rear reflectors included?

No. This listing includes the rear bumper cover bare shell only. The lower diffuser / lip and left and right rear reflectors are not included.

3. Why may the bumper cover arrive folded?

The flexible bumper cover may be folded and securely protected inside a reinforced shipping carton to reduce oversized shipping costs. Temporary packaging impressions normally improve after proper unpacking and shape recovery.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured or supplied by Honda Motor Co., Ltd. OEM reference numbers, Partslink / North American interchange numbers, vehicle names, trim names, and body-style descriptions are provided solely for product identification and compatibility verification. Their use does not indicate that this product is a genuine Honda OEM part. Honda®, Civic®, and related trademarks are the property of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Product Overview

Restore the main upper and lower sections of your Honda CR-V front bumper with this aftermarket two-piece Front Bumper Cover Assembly Kit. This package includes one primed front upper bumper cover fascia and one textured black front lower bumper valance with an integrated center honeycomb mesh grille. The upper bumper cover requires preparation and painting, while the lower valance is supplied in a textured black matte finish.

Package Includes

1. Front Upper Bumper Cover Fascia

• Quantity: 1

• Front upper bumper cover bare-shell panel

• Primed black finish

• Surface preparation and painting required

• Partslink Number: HO1014104

• OEM Reference Numbers: 04711-TLA-A00ZZ / 71101-TLA-A00ZZ

• Hollander Number: 101-60317

2. Front Lower Bumper Cover Valance with Integrated Mesh Grille

• Quantity: 1

• Front lower bumper valance skirt

• Pre-assembled center honeycomb mesh grille

• Textured black matte finish

• Partslink Number: HO1015117

• OEM Reference Number: 71102-TLA-A00

• Hollander Number: 101-60318

This listing includes only the two components listed above.

The following parts are not included:

• Upper chrome grille bars or moldings

• Fog-lamp housing caps or bezels

• Fog lights

• Bumper brackets

• Mounting hardware or fasteners

Existing factory components may need to be transferred from the original bumper assembly or purchased separately as needed.

Packaging Notice

The flexible upper bumper cover may be folded and securely wrapped for transportation to reduce oversized carrier shipping surcharges. Temporary bends, creases, or deformation may be visible after unpacking. Place the upper bumper cover in a warm environment and allow sufficient time for it to gradually return to its original shape before test fitting. The lower bumper valance and integrated honeycomb mesh grille are packaged with additional protection to help preserve the grille structure and surrounding mounting areas during transportation.

Paint and Installation Notice

The front upper bumper cover is supplied in a primed black finish and is not pre-painted. Professional surface preparation, test fitting, color matching, painting, and installation are strongly recommended. The front lower bumper valance features a textured black matte finish and is typically installed without painting. Inspect and test-fit both components before painting, drilling, trimming, or making any modifications. Painted, modified, or installed parts may not be eligible for return.

Compatibility Disclaimer

This is an aftermarket replacement part and is not a genuine Honda OEM product. OEM part numbers, North American interchange numbers, vehicle names, model names, and other reference identifiers are provided solely for product identification and compatibility-reference purposes. Honda® and CR-V® are registered trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Product Description

This Front Bumper Bracket Right Passenger Side Support Retainer Mounting Spacer is designed for 2021-2022 Honda Accord (10th Gen Facelift Sedan All Trims Sport, EX, LX) and installs at the right-hand passenger-side front bumper and fender edge mounting area. This support guide retainer helps secure and position the front bumper cover along the passenger-side fender edge. It is suitable for replacing a bracket that is cracked, broken, loose, missing, or damaged during bumper removal, collision repair, or other front-end repair work. This listing includes the Right Passenger Side (RH) single component only – HO1043124 / OEM: 71193-TVA-A11 Core Spec.

Interchange Part Numbers

Please compare the component and reference numbers below with your existing part before ordering.

Key Features

• Right Passenger Side (RH) front bumper support retainer bracket

• Helps support and guide the bumper cover along the fender edge

• Integrated retention points for the corresponding side mounting location

• Suitable for replacing cracked, broken, loose, damaged, or missing retainers

• Useful for bumper replacement, collision repair, and front-end restoration

• Single-component replacement for the corresponding RH mounting position

Technical Fitment Notes

This front bumper support retainer guide bracket is intended specifically for the 2021-2022 facelift 10th Gen Honda Accord configuration. The molded bracket profile, snap-in retention points, and mounting locations are designed to correspond with the right-hand passenger-side fender edge and front bumper corner mounting area, helping maintain proper positioning and support of the bumper cover. Important: This component is intended for the 2021-2022 post-facelift configuration and should not be treated as interchangeable with the 2018-2020 pre-facelift configuration. The earlier models use a different fender-edge alignment and mounting-anchor layout. When matched to the correct vehicle application and mounting configuration, this bracket is designed as a direct replacement-style component without requiring cutting, drilling, or trimming.

Package Includes

• 1 × Front Bumper Right Passenger Side Support Retainer Mounting Spacer

Total: 1 Piece – Right Passenger Side (RH) Only

Important Component Notice

This listing includes only the component specifically stated in the Package Includes section. The left-side bracket and any additional hardware, fasteners, clips, screws, trim pieces, brackets, accessories, or surrounding components that are not specifically listed are not included. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the product description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original bracket, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the Right Passenger Side (RH) component only. Please confirm the installation side, vehicle year, facelift configuration, existing mounting layout, and reference numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Honda Motor Co., Ltd. or American Honda Motor Co., Inc. Honda® and Accord® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, mounting points, installation side, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Description

This Front Bumper Bracket Left Driver Side Support Retainer Mounting Spacer is designed for 2021-2022 Honda Accord (10th Gen Facelift Sedan All Trims Sport, EX, LX) and installs at the left-hand driver-side front bumper and fender edge mounting area. This support guide retainer helps secure and position the front bumper cover along the driver-side fender edge. It is suitable for replacing a bracket that is cracked, broken, loose, missing, or damaged during bumper removal, collision repair, or other front-end repair work. This listing includes the Left Driver Side (LH) single component only – HO1042124 / OEM: 71198-TVA-A11 Core Spec.

Interchange Part Numbers

Please compare the component and reference numbers below with your existing part before ordering.

Key Features

• Left Driver Side (LH) front bumper support retainer bracket

• Helps support and guide the bumper cover along the fender edge

• Integrated retention points for the corresponding side mounting location

• Suitable for replacing cracked, broken, loose, damaged, or missing retainers

• Useful for bumper replacement, collision repair, and front-end restoration

• Single-component replacement for the corresponding LH mounting position

Technical Fitment Notes

This front bumper support retainer guide bracket is intended specifically for the 2021-2022 facelift 10th Gen Honda Accord configuration. The molded bracket profile, snap-in retention points, and mounting locations are designed to correspond with the left-hand driver-side fender edge and front bumper corner mounting area, helping maintain proper positioning and support of the bumper cover. Important: This component is intended for the 2021-2022 post-facelift configuration and should not be treated as interchangeable with the 2018-2020 pre-facelift configuration. The earlier models use a different fender-edge alignment and mounting-anchor layout. When matched to the correct vehicle application and mounting configuration, this bracket is designed as a direct replacement-style component without requiring cutting, drilling, or trimming.

Package Includes

• 1 × Front Bumper Left Driver Side Support Retainer Mounting Spacer

Total: 1 Piece – Left Driver Side (LH) Only

Important Component Notice

This listing includes only the component specifically stated in the Package Includes section. The right-side bracket and any additional hardware, fasteners, clips, screws, trim pieces, brackets, accessories, or surrounding components that are not specifically listed are not included. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the product description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original bracket, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the Left Driver Side (LH) component only. Please confirm the installation side, vehicle year, facelift configuration, existing mounting layout, and reference numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Honda Motor Co., Ltd. or American Honda Motor Co., Inc. Honda® and Accord® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, mounting points, installation side, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Description

This Front Bumper Bracket Left Driver Side Support Retainer Mounting Spacer is designed for 2018-2020 Honda Accord (10th Gen Pre-Facelift Sedan All Trims Sport, EX, LX) and installs at the left-hand driver-side front bumper and fender edge mounting area. This support guide retainer helps secure and position the front bumper cover along the driver-side fender edge. It is suitable for replacing a bracket that is cracked, broken, loose, missing, or damaged during bumper removal, collision repair, or other front-end repair work. This listing includes the Left Driver Side (LH) single component only – HO1042136 / OEM: 71198-TVA-A01 Core Spec.

Interchange Part Numbers

Please compare the component and reference numbers below with your existing part before ordering.

Key Features

• Left Driver Side (LH) front bumper support retainer bracket

• Helps support and guide the bumper cover along the fender edge

• Integrated retention points for the corresponding side mounting location

• Suitable for replacing cracked, broken, loose, damaged, or missing retainers

• Useful for bumper replacement, collision repair, and front-end restoration

• Single-component replacement for the corresponding LH mounting position

Technical Fitment Notes

This front bumper support retainer guide bracket is intended specifically for the 2018-2020 pre-facelift 10th Gen Honda Accord configuration. The molded bracket profile, snap-in retention points, and mounting locations are designed to correspond with the left-hand driver-side fender edge and front bumper corner mounting area, helping keep the bumper cover properly positioned and supported. Important: This component is intended for the 2018-2020 pre-facelift configuration and should not be treated as interchangeable with the 2021-2022 post-facelift configuration. The later models use a different fender-edge mounting and anchor layout. When matched to the correct vehicle application and mounting configuration, this bracket is designed as a direct replacement-style component without requiring cutting, drilling, or trimming.

Package Includes

• 1 × Front Bumper Left Driver Side Support Retainer Mounting Spacer

Total: 1 Piece – Left Driver Side (LH) Only

Important Component Notice

This listing includes only the component specifically stated in the Package Includes section. The right-side bracket and any additional hardware, fasteners, clips, screws, trim pieces, brackets, accessories, or surrounding components that are not specifically listed are not included. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the product description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original bracket, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the Left Driver Side (LH) component only. Please confirm the installation side, vehicle year, pre-facelift configuration, existing mounting layout, and reference numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Honda Motor Co., Ltd. or American Honda Motor Co., Inc. Honda® and Accord® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, mounting points, installation side, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Description

This Front Bumper Bracket Right Passenger Side Support Retainer Mounting Spacer is designed for 2018-2020 Honda Accord (10th Gen Pre-Facelift Sedan All Trims Sport, EX, LX) and installs at the right-hand passenger-side front bumper and fender edge mounting area. This support guide retainer helps secure and position the front bumper cover along the passenger-side fender edge. It is suitable for replacing a bracket that is cracked, broken, loose, missing, or damaged during bumper removal, collision repair, or other front-end repair work. This listing includes the Right Passenger Side (RH) single component only – HO1043136 / OEM: 71193-TVA-A01 Core Spec.

Interchange Part Numbers

Please compare the component and reference numbers below with your existing part before ordering.

Key Features

• Right Passenger Side (RH) front bumper support retainer bracket

• Helps support and guide the bumper cover along the fender edge

• Integrated retention points for the corresponding side mounting location

• Suitable for replacing cracked, broken, loose, damaged, or missing retainers

• Useful for bumper replacement, collision repair, and front-end restoration

• Single-component replacement for the corresponding RH mounting position

Technical Fitment Notes

This front bumper support retainer guide bracket is intended specifically for the 2018-2020 pre-facelift 10th Gen Honda Accord configuration. The molded bracket profile, snap-in retention points, and mounting locations are designed to correspond with the right-hand passenger-side fender edge and front bumper corner mounting area, helping keep the bumper cover properly positioned and supported. Important: This component is intended for the 2018-2020 pre-facelift configuration and should not be treated as interchangeable with the 2021-2022 post-facelift configuration. The later models use a different fender-edge mounting and anchor layout. When matched to the correct vehicle application and mounting configuration, this bracket is designed as a direct replacement-style component without requiring cutting, drilling, or trimming.

Package Includes

• 1 × Front Bumper Right Passenger Side Support Retainer Mounting Spacer

Total: 1 Piece – Right Passenger Side (RH) Only

Important Component Notice

This listing includes only the component specifically stated in the Package Includes section. The left-side bracket and any additional hardware, fasteners, clips, screws, trim pieces, brackets, accessories, or surrounding components that are not specifically listed are not included. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the product description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original bracket, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the Right Passenger Side (RH) component only. Please confirm the installation side, vehicle year, pre-facelift configuration, existing mounting layout, and reference numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Honda Motor Co., Ltd. or American Honda Motor Co., Inc. Honda® and Accord® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, mounting points, installation side, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.