2018–2020 Honda Accord Parts

Product Overview

Restore the factory-style appearance and proper front-end configuration of your vehicle with this premium aftermarket front upper center grille shell. Designed for select 2018–2020 Honda Accord Touring sedan models, this grille features a factory-style center opening and mounting provision for the vehicle’s original forward radar sensor system.

Constructed from impact-resistant automotive-grade ABS plastic, the grille combines a glossy piano-black exterior surface with textured black mesh accents. Its vehicle-specific shape and factory-style mounting locations help provide secure installation, proper bumper alignment, and a clean finished appearance.

This listing includes the grille shell only. The radar sensor, radar cover, electronic components, emblems, chrome moldings, brackets, wiring, clips, and mounting hardware are not included unless specifically shown and stated.

Reference Part Numbers

Reference numbers are provided solely for product identification and compatibility verification.

Package Includes

• 1 × Front Upper Center Grille Shell with Radar Opening

The radar sensor, radar cover, calibration equipment, emblem, chrome molding, support brackets, wiring, clips, fasteners, and installation instructions are not included unless specifically shown and stated.

Fitment Verification

Before ordering, please confirm:

• Vehicle year, make, and model
• Touring trim configuration
• Sedan body style
• Original radar-sensor opening and mounting arrangement
• Original grille shape and mounting points
• Partslink and OEM reference numbers

If you are unsure about compatibility, please contact us with your VIN and clear photos of the original grille and radar mounting area before purchasing.

Installation

Professional installation is strongly recommended. The original radar sensor may require transfer, alignment, diagnostic procedures, or calibration after installation. Radar calibration must be performed by a qualified automotive repair facility when required.

Packaging and Shipping

The grille will be inspected and securely packaged to help reduce the possibility of damage during transportation. Please inspect the product and packaging upon delivery and contact us promptly if the item arrives damaged.

Compatibility Disclaimer

This product is an aftermarket replacement component and is not a genuine Honda OEM product. OEM reference numbers, Partslink numbers, North American interchange numbers, Hollander identifiers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes.

All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement component before purchase. Honda® and Accord® are trademarks of Honda Motor Co., Ltd. Trim, engine, body-style, driver-assistance, and configuration names are used solely to identify compatible vehicle applications.

VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Product Overview

Restore the clean, factory-style appearance of your vehicle’s front end with this premium aftermarket front upper center grille shell. Designed for select 2018–2020 Honda Accord sedan models, this grille replaces a cracked, faded, damaged, or missing factory grille assembly.

Manufactured from durable automotive-grade ABS plastic, it features a matte black mesh design with textured black accents. Its vehicle-specific shape and factory-style mounting locations help provide secure installation, proper bumper alignment, and a clean finished appearance.

This listing includes one aftermarket front upper center grille shell only. Emblems, chrome moldings, radar sensors, mounting hardware, and other surrounding components are not included unless specifically shown or stated.

Vehicle Fitment

Fits select 2018–2020 Honda Accord 10th Generation pre-facelift sedan models.

Reference Part Numbers

Package Includes

• 1 × Front Upper Center Grille Shell

Only the component described above is included. Emblems, chrome trim moldings, grille support brackets, radar sensors, cameras, wiring, clips, fasteners, and installation instructions are not included unless shown and specifically stated.

Fitment Verification

Vehicle trim packages and factory grille configurations may vary within the same model year. Before ordering, please verify:

• Vehicle year, make, and model
• Sedan body style
• Trim and equipment package
• Factory radar-sensor configuration
• Original part shape and mounting locations
• Partslink and OEM reference numbers

If you are unsure about compatibility, please contact us with your VIN and clear photos of the original grille before purchasing.

Installation

Professional installation is recommended. Reuse of original mounting clips or hardware may be required. Inspect and test-fit the grille before completing installation or removing protective packaging.

Packaging and Shipping

The grille will be carefully inspected and securely packaged to help reduce the possibility of damage during transportation. Please inspect the product upon delivery and contact us promptly if the package or item arrives damaged.

Compatibility Disclaimer

This product is an aftermarket replacement component and is not a genuine Honda OEM product. OEM reference numbers, Partslink numbers, North American interchange numbers, Hollander identifiers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes.

All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement component before purchase. Honda® and Accord® are trademarks of Honda Motor Co., Ltd. Trim, engine, body-style, equipment-package, and configuration names are used solely to identify compatible vehicle applications.

VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Product Overview

This aftermarket front bumper support bracket is designed for the left driver-side corner of select 2018–2020 Honda Accord sedan models. It provides a practical replacement for an original bracket that is cracked, distorted, broken at the mounting tabs, or missing after collision repair.

The reinforced molded construction supports the outer edge of the bumper cover where it meets the driver-side fender. Correct bracket support helps keep the bumper corner seated in position and may reduce sagging, vibration, uneven gaps, or separation along the fender line.

The bracket features vehicle-specific attachment points and a matte black molded finish. This listing includes the left-side bracket only; the bumper cover, right-side bracket, screws, clips, and other surrounding components are sold separately.

Vehicle Fitment

Fits select 2018–2020 Honda Accord 10th Generation pre-facelift sedan models.

Reference Numbers

Package Includes

• 1× Front Bumper Side Support Bracket
• Position: Front Left Driver Side
• Color: Matte Black

Fitment Verification

Compare the replacement bracket with the original driver-side component before installation. Pay particular attention to its length, curvature, clip locations, mounting holes, end shape, and fender-edge orientation.

This bracket is side-specific and cannot be substituted with the right passenger-side bracket. Test-fit it before reinstalling or tightening the bumper cover.

Components Sold Separately

This listing includes the left driver-side support bracket only. It does not include:

• Right passenger-side bracket
• Front bumper cover
• Fender
• Grille components
• Screws, clips, or retainers
• Splash shields
• Other surrounding body components

Installation

Access to the driver-side bumper corner may require loosening or partially removing the bumper cover, wheel-well liner, or nearby fasteners.

Remove damaged clips and debris before positioning the replacement bracket. Align all mounting holes before tightening the hardware, and confirm that the bumper edge engages evenly along the bracket.

Reuse factory hardware only when it is undamaged and compatible. Professional installation is recommended following collision damage.

Packaging & Handling

Inspect the molded ribs, clip points, holes, and end tabs before installation. As a long plastic component, the bracket may experience slight temporary flexing during shipment.

Allow it to rest at room temperature before test-fitting, and do not bend or force the mounting tabs into place.

Compatibility Disclaimer

This product is an aftermarket replacement component and is not a genuine Honda OEM product. OEM reference numbers, Partslink numbers, North American interchange numbers, Hollander identifiers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement component before purchase. Honda® and Accord® are trademarks of Honda Motor Co., Ltd. Trim, engine, body-style, and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Product Overview

Designed for select 2018–2020 Honda Accord sedan models, this aftermarket front upper grille molding carrier bracket provides a clean replacement for a cracked, broken, warped, or missing original support bracket.

Manufactured from reinforced, impact-resistant automotive-grade ABS plastic, the bracket is designed to support and secure the upper chrome grille molding along the front center grille area. Its vehicle-specific contour, reinforcement ribs, and mounting points help restore proper trim stability and front-end panel alignment.

Replacing a damaged carrier may help reduce loose trim movement, vibration, uneven gaps, and poor alignment around the upper grille molding.

This listing includes the black carrier bracket only. The chrome molding, main grille, emblem, mounting hardware, and surrounding front-end components are not included.

Vehicle Fitment

Fits select 2018–2020 Honda Accord 10th Generation pre-facelift sedan models.

Reference Numbers

Package Includes

• 1× Front Upper Grille Molding Carrier Bracket

Fitment Verification

Before ordering, compare the bracket’s overall contour, reinforcement pattern, mounting holes, attachment tabs, installation position, and reference numbers with the original component on your vehicle.

This bracket is designed to support the corresponding front upper grille molding. Confirm that the original chrome molding and surrounding grille components are reusable before installation.

Professional fitment verification is recommended if the vehicle has an aftermarket grille, a previously replaced bumper or grille assembly, or collision-related front-end repairs.

Components Sold Separately

This listing includes the upper grille molding carrier bracket only.

Installation

This carrier bracket is designed as a direct replacement for the corresponding original support component. Installation may require removal of the upper grille molding, main grille, bumper cover, or surrounding front-end components.

Inspect all mounting holes, tabs, retainers, and attachment points before installation. Do not force the bracket into position if the mounting locations do not align.

Transfer reusable factory hardware only if it is undamaged and compatible. Professional installation is recommended to prevent damage to the bracket, chrome molding, grille, or bumper components.

Packaging & Handling

The carrier bracket is a long molded component and may experience minor temporary flexing during packaging or transportation.

After unpacking, place it on a flat surface at room temperature and allow it to return to its natural contour before test-fitting. Inspect all mounting tabs, holes, and reinforcement areas for shipping damage before installation.

Avoid placing heavy objects on the bracket or applying excessive pressure to the mounting tabs.

Compatibility Disclaimer

This product is an aftermarket replacement component and is not a genuine Honda OEM product. OEM reference numbers, Partslink numbers, North American interchange numbers, Hollander identifiers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement component before purchase. Honda® and Accord® are trademarks of Honda Motor Co., Ltd. Trim, engine, body-style, and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Product Overview

Designed for select 2018–2020 Honda Accord sedan models, this aftermarket front bumper chrome trim strip provides a clean replacement for a scratched, cracked, peeling, damaged, or missing passenger-side fog light bezel molding.

Manufactured from durable automotive-grade ABS plastic, the trim features a bright mirror chrome-plated finish that helps restore the vehicle’s factory-style front-end appearance. Its vehicle-specific shape and mounting design allow it to fit within the right-side lower bumper bezel area with proper alignment.

This product is the chrome trim strip only. It is not a complete fog light bezel or fog light assembly.

Vehicle Fitment

Fits select 2018–2020 Honda Accord 10th Generation pre-facelift sedan models.

Reference Numbers

Package Includes

• 1× Front Bumper Fog Light Bezel Chrome Trim Strip

Fitment Verification

Before ordering, compare the molding’s overall shape, length, mounting points, installation side, finish, and reference numbers with the original component on your vehicle.

This part is designed for the front right passenger side only and is not interchangeable with the left driver-side trim.

Because bumper and bezel designs can vary by trim level, confirm that your vehicle originally uses a separate chrome trim strip in this location. This component is not intended for LX base models with the unpainted lower bumper configuration.

Components Sold Separately

This listing includes the right passenger-side chrome trim strip only.

Finish & Care

The mirror chrome-plated surface is intended to match the factory-style bright exterior finish and does not require painting.

Clean the surface with mild automotive soap, water, and a soft microfiber cloth. Do not use abrasive cleaners, polishing compounds, rough brushes, or harsh chemicals, as these may scratch or damage the chrome plating.

Installation

This trim strip is designed as a direct replacement for the original passenger-side chrome molding. Installation may require partial removal of the surrounding bezel or access from behind the front bumper cover.

Inspect all mounting points, clips, and contact surfaces before installation. Do not force the trim into place if the mounting points do not align. Professional installation is recommended to prevent damage to the trim, chrome finish, retaining clips, or surrounding bumper components.

This is a non-electrical exterior trim component and does not require wiring.

Packaging & Handling

The molding is packaged to help protect its chrome-plated surface and mounting points during transportation. Inspect the product for scratches, cracks, shipping damage, or bent mounting features before installation.

Avoid placing pressure on the ends of the trim strip. Keep the protective packaging and surface film in place until fitment and product condition have been confirmed.

Compatibility Disclaimer

This product is an aftermarket replacement component and is not a genuine Honda OEM product. OEM reference numbers, Partslink numbers, North American interchange numbers, Hollander identifiers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement component before purchase. Honda® and Accord® are trademarks of Honda Motor Co., Ltd. Trim, engine, body-style, and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Product Overview

Designed for select 2018–2020 Honda Accord sedan models, this aftermarket front bumper fog light bezel provides a clean replacement for a cracked, damaged, faded, or missing driver-side trim cover.

The bezel is manufactured from durable, impact-resistant automotive-grade plastic and features a factory-style textured matte black finish. Its vehicle-specific shape and mounting locations are designed to fit securely within the left-side lower front bumper opening, helping restore proper panel alignment and the vehicle’s original front-end appearance.

This listing includes the driver-side bezel trim only. A fog light, bulb, wiring, mounting hardware, and surrounding bumper components are not included.

Vehicle Fitment

Fits select 2018–2020 Honda Accord 10th Generation pre-facelift sedan models.

Reference Numbers

Package Includes

• 1× Front Bumper Fog Light Bezel Trim Cover

Fitment Verification

Before ordering, compare the bezel’s overall shape, opening design, mounting tabs, installation position, and reference numbers with the original component on your vehicle.

This part is designed for the front left driver side only. It is not interchangeable with the right passenger-side bezel.

Professional fitment verification is recommended if the vehicle has an aftermarket bumper, a previously replaced bumper cover, or trim-specific exterior modifications.

Finish & Care

The textured matte black surface is designed to match the factory-style appearance and does not require painting. Do not use abrasive cleaners, harsh chemicals, or polishing compounds that could damage or alter the textured finish.

Minor surface variations may occur due to the molding and manufacturing process.

Installation

This bezel is designed as a direct replacement for the original driver-side front bumper trim. Installation may require access from behind or underneath the front bumper cover.

Inspect all mounting tabs, clips, and bumper openings before installation. Do not force the bezel into place if the mounting points do not align. Professional installation is recommended to prevent damage to the bezel, bumper cover, or retaining tabs.

Because this product is a non-electrical trim component, no wiring connection is required.

Packaging & Handling

The bezel is packaged to help protect its textured surface and mounting tabs during transportation. Inspect the product for shipping damage before beginning installation.

Avoid placing excessive pressure on the mounting tabs. Keep the original packaging until product condition and vehicle compatibility have been confirmed.

Compatibility Disclaimer

This product is an aftermarket replacement component and is not a genuine Honda OEM product. OEM reference numbers, Partslink numbers, North American interchange numbers, Hollander identifiers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement component before purchase. Honda® and Accord® are trademarks of Honda Motor Co., Ltd. Trim, engine, body-style, and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Product Overview

Designed for select 2018–2020 Honda Accord sedan models, this aftermarket front bumper fog light bezel provides a clean replacement for a cracked, damaged, faded, or missing passenger-side trim cover.

The bezel is manufactured from durable, impact-resistant automotive-grade plastic and features a factory-style textured matte black finish. Its vehicle-specific shape and mounting locations are designed to fit securely within the right-side lower front bumper opening, helping restore proper panel alignment and the vehicle’s original front-end appearance.

This listing includes the passenger-side bezel trim only. A fog light, bulb, wiring, mounting hardware, and surrounding bumper components are not included.

Vehicle Fitment

Fits select 2018–2020 Honda Accord 10th Generation pre-facelift sedan models.

Reference Numbers

Package Includes

• 1× Front Bumper Fog Light Bezel Trim Cover

Fitment Verification

Before ordering, compare the bezel’s overall shape, opening design, mounting tabs, installation position, and reference numbers with the original component on your vehicle.

This part is designed for the front right passenger side only. It is not interchangeable with the left driver-side bezel.

Professional fitment verification is recommended if the vehicle has an aftermarket bumper, a previously replaced bumper cover, or trim-specific exterior modifications.

Components Sold Separately

This listing includes the right passenger-side fog light bezel trim cover only.

Finish & Care

The textured matte black surface is designed to match the factory-style appearance and does not require painting. Do not use abrasive cleaners, harsh chemicals, or polishing compounds that could damage or alter the textured finish.

Minor surface variations may occur due to the molding and manufacturing process.

Installation

This bezel is designed as a direct replacement for the original passenger-side front bumper trim. Installation may require access from behind or underneath the front bumper cover.

Inspect all mounting tabs, clips, and bumper openings before installation. Do not force the bezel into place if the mounting points do not align. Professional installation is recommended to prevent damage to the bezel, bumper cover, or retaining tabs.

Because this product is a non-electrical trim component, no wiring connection is required.

Packaging & Handling

The bezel is packaged to help protect its textured surface and mounting tabs during transportation. Inspect the product for shipping damage before beginning installation.

Avoid placing excessive pressure on the mounting tabs. Keep the original packaging until product condition and vehicle compatibility have been confirmed.

Compatibility Disclaimer

This product is an aftermarket replacement component and is not a genuine Honda OEM product. OEM reference numbers, Partslink numbers, North American interchange numbers, Hollander identifiers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement component before purchase. Honda® and Accord® are trademarks of Honda Motor Co., Ltd. Trim, engine, body-style, and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Product Overview

Designed for select 2018–2020 Honda Accord sedan models, this aftermarket rear bumper reflector provides a clean replacement for a cracked, faded, damaged, or missing driver-side reflector.

The assembly features an optical red lens and a durable automotive-grade ABS plastic housing designed to match the original reflector’s shape, dimensions, and mounting position. It installs in the left-side lower rear bumper opening, helping restore the vehicle’s factory appearance and nighttime rear visibility.

This component is a passive safety reflector and does not contain a bulb, LED, or electrical connection.

Vehicle Fitment

Fits select 2018–2020 Honda Accord 10th Generation pre-facelift sedan models.

Reference Numbers

Package Includes

1× Rear Bumper Reflector

Fitment Verification

Before ordering, compare the reflector’s shape, mounting tabs, installation position, and reference numbers with the original component on your vehicle.

This part is designed for the left driver side of the rear bumper. It is not interchangeable with the right passenger-side reflector.

Professional fitment verification is recommended if the vehicle has an aftermarket bumper, a previously replaced bumper cover, or trim-specific exterior modifications.

Installation

This reflector is designed as a direct replacement for the original driver-side rear bumper reflector. Installation may require access from behind or underneath the rear bumper cover.

Inspect the mounting tabs and bumper opening before installation. Do not force the reflector into place if the mounting points do not align. Professional installation is recommended to prevent damage to the reflector, bumper cover, or retaining tabs.

No electrical wiring is required because this product functions through passive light reflection.

Packaging & Handling

The reflector is packaged to help protect the lens and mounting tabs during transportation. After unpacking, inspect the product for shipping damage before beginning installation.

Avoid placing excessive pressure on the lens or mounting tabs. Keep the protective packaging until vehicle compatibility and product condition have been confirmed.

Disclaimer

This is an aftermarket replacement component and is not manufactured, authorized, sponsored, or endorsed by Honda Motor Co., Ltd.

Honda, Accord, associated vehicle names, OEM numbers, Partslink numbers, Hollander identifiers, and related references are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, production date, and existing rear bumper configuration before purchase. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.