Bumper Covers

Product Overview

Restore the complete front bumper appearance of your 2020–2022 Honda CR-V with this Complete Front Bumper Cover Assembly Kit, designed for compatible North American Facelift (Mid-Cycle) models. This complete 2-piece front bumper bundle combines the Front Upper Bumper Cover and the Front Lower Valance with the factory-installed Center Honeycomb Mesh Grille into one convenient replacement package. Whether you're repairing collision damage or replacing worn bumper components, this kit helps restore a clean factory-style appearance while eliminating the need to purchase the upper and lower sections separately.

For fitment verification, compare your original components with the following reference numbers before ordering:

• OEM Part Number: 04711-TLY-H50

• OEM Part Number: 71502-TLY-H50

• North American Interchange Numbers: HO1000320 / HO1200236

Package Includes

Gasoline LX / EX Style Components

Important Information

This listing includes both the Front Upper Bumper Cover and the Front Lower Bumper Valance with the factory pre-installed Center Honeycomb Mesh Grille Panel.

The following components are NOT included:

• Front upper grille assembly

• Front emblem

• Headlight eyebrow garnish moldings

• Fog lamp housings

• Fog lamp bezel covers

• Mounting brackets

• Hardware

• Sensors

• Wiring

• Any other components not specifically listed

Any components not included with this listing must be transferred from the original vehicle or purchased separately.

Fitment & Installation

✓ 100% Fitment Guaranteed for compatible North American 2020–2022 Honda CR-V Facelift (Mid-Cycle) Gasoline LX and EX models when the original bumper configuration and reference numbers match this package. This factory-matched 2-in-1 bundle combines the upper bumper cover and the lower valance with the integrated center honeycomb mesh grille, providing a complete front bumper exterior replacement in one package. Both components are shipped together in one oversized heavy-duty reinforced protective carton via FedEx Ground, with premium protective foam packaging designed to help prevent shipping damage. Always test-fit both components before painting or permanent installation. Products that have been painted, installed, drilled, cut, damaged, or permanently modified may not qualify for return under the VELNOX Auto Return Policy.

FAQS

1. What is included in this kit?

This package includes:

• One Front Upper Bumper Cover Bare Skin Shell Panel

• One Front Lower Bumper Valance with the integrated Center Honeycomb Mesh Grille Panel

2. Does this include the upper grille, emblem, or fog light trim?

No. The upper grille assembly, emblem, headlight eyebrow garnish moldings, fog lamp housings, fog lamp bezel covers, hardware, and other related components are not included.

3. Does the upper bumper cover come painted?

No. The upper bumper cover is supplied in a primed finish and requires professional preparation and painting before installation.

4. Does the lower valance require painting?

No. The lower valance is manufactured with a textured black matte finish and is ready for installation.

5. How do I verify fitment?

Compare your original components with:

• 04711-TLY-H50 / HO1000320

• 71502-TLY-H50 / HO1200236

Also verify your vehicle's model year, trim level, and bumper configuration before ordering.

6. Why are both components shipped together?

Shipping both primary bumper components together helps simplify installation, reduce shipping costs, and ensure both parts arrive in the same reinforced protective package.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM assembly. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other reference identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda®, CR-V®, LX®, EX®, and all related vehicle names are registered trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Product Overview

A damaged front bumper can leave your Honda CR-V looking incomplete and may require more than replacing a single panel. This Front Bumper Cover Kit combines the two primary exterior bumper components into one package: the upper bumper cover and the lower valance with an integrated center honeycomb mesh grille. Designed for compatible North American 2017–2019 Honda CR-V Pre-Facelift LX and EX models, this two-piece kit provides a practical solution for collision repair, front-end restoration, or replacement of damaged factory bumper panels.

For fitment verification, compare your original parts with:

• OEM Part Number: 04711-TLA-A00ZZ

• OEM Part Number: 71102-TLA-A00

• North American Interchange Numbers: HO1000305 / HO1200223

Package Includes

Important Information

This package includes the two primary front bumper exterior panels only. It is not a complete front-end hardware assembly.

The following components are not included:

• Upper front grille assembly

• Chrome grille bars or trim

• Fog lights

• Fog light housings or bezel covers

• Front emblem

• Reinforcement or crash beam

• Mounting brackets

• Retainers and hardware

• Sensors

• Wiring

• Any other components not specifically listed above

Compatible original parts may need to be transferred from the existing bumper assembly or purchased separately.

Fitment & Installation

100% Fitment Guaranteed for compatible North American 2017–2019 Pre-Facelift LX and EX models when the vehicle’s original bumper configuration and reference numbers match this listing. The upper bumper cover is supplied in a primed finish and requires professional preparation and painting. The lower valance has a textured black matte finish and includes the center honeycomb mesh grille pre-assembled.

This kit is designed as a direct replacement for compatible factory applications, with no vehicle modifications required. Always test-fit both components before painting or permanent installation. Products that have been painted, installed, drilled, cut, damaged, or permanently modified may not qualify for return under the VELNOX Auto Return Policy.

FAQS

1. Is this a complete front bumper assembly?

No. This is a two-piece bumper cover kit containing the upper bumper cover and lower valance with integrated center grille. The upper grille, fog lights, reinforcement, brackets, hardware, and other components are not included.

2. Is the center grille included?

Yes. The center honeycomb mesh grille is pre-assembled into the lower bumper valance.

3. Does the upper bumper cover come painted?

No. The upper bumper cover is supplied in a primed finish and requires professional preparation and painting before installation.

4. Does the lower valance require painting?

No. The lower valance is supplied with a textured black matte finish.

5. How do I verify fitment?

Confirm that your vehicle is a compatible North American 2017–2019 Honda CR-V Pre-Facelift LX or EX model, then compare your original components with:

• 04711-TLA-A00ZZ / HO1000305

• 71102-TLA-A00 / HO1200223

6. Should both components be test-fitted before painting?

Yes. Test-fit the upper bumper cover and lower valance before painting, drilling, cutting, or making any permanent modifications.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM assembly. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other reference identifiers are provided solely for product identification and compatibility-reference purposes. Honda® and CR-V® are registered trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Product Overview

Front-end damage can quickly affect the appearance of your Nissan Sentra, whether it's caused by road debris, a parking lot incident, or a minor collision. Replacing a damaged bumper cover is one of the most effective ways to restore your vehicle's clean, modern appearance while maintaining its factory-inspired styling. This 2020-2023 Nissan Sentra Front Bumper Cover features an OE-style design engineered to complement the original body lines of compatible Sentra models. Finished with a smooth primed surface, it is ready for professional paint preparation and color matching. Once refinished and installed, it helps restore the bold front-end styling introduced with the latest generation Nissan Sentra. Designed for collision repair, cosmetic restoration, and routine vehicle maintenance, this replacement front bumper cover provides a practical and cost-effective solution for replacing a cracked, scratched, or damaged bumper.

Inspired by the Next-Generation Sentra Design

The 2020-2023 Nissan Sentra introduced a completely redesigned exterior featuring Nissan's signature V-Motion grille, lower body profile, and sport-inspired styling. This OE-style replacement front bumper cover is engineered to complement the original design while restoring your vehicle after collision damage, parking incidents, or everyday driving.

Restore Your Sentra's Original Appearance

A replacement front bumper cover helps restore the clean, finished appearance of your vehicle following accident damage or everyday wear. After professional paint preparation and installation, it blends naturally with the original body lines, helping your Sentra maintain its premium compact sedan styling.

When Should You Replace a Front Bumper Cover?

Consider replacing your front bumper cover if you notice:

• Cracked or broken bumper plastic

• Broken mounting tabs

• Deep scratches or heavy scuff marks

• Dents caused by collisions or road impacts

• Paint damage beyond repair

• Visible damage affecting your vehicle's appearance

Replacing a damaged bumper cover is often more practical and cost-effective than repairing severely damaged plastic components.

Why Choose an OE-Style Replacement?

OE-style replacement bumper covers are engineered to complement the original body design of compatible vehicles without altering their factory styling. The smooth primed finish provides an excellent foundation for professional paint preparation and color matching, helping restore your vehicle's original appearance.

Primed Surface Ready for Paint

This bumper cover is supplied with a smooth primed finish to simplify the refinishing process.

Benefits include:

• Ready for professional paint preparation

• Excellent surface for color matching

• Smooth, consistent finish

• Reduced preparation time before painting

• Helps achieve a factory-quality appearance

Professional painting and color matching are recommended before installation.

Common Repair Applications

This front bumper cover is commonly used for:

• Front-end collision repair

• Cosmetic bumper replacement

• Insurance claim repairs

• Exterior body restoration

• Daily driver maintenance

• Vehicle reconditioning before resale

• Professional collision repair projects

Whether you're repairing accident damage or restoring your Sentra's appearance, this replacement bumper cover helps complete a professional-quality repair.

Product Features

• OE-style front bumper cover replacement
• Precision-molded to complement original body lines
• Durable automotive-grade construction
• Smooth primed finish ready for paint
• Helps restore original front-end appearance
• Designed for collision repair and cosmetic restoration
• Suitable for professional body shops and experienced DIY installations

Important Information

This listing includes one primed front bumper cover only. Grille, emblem, fog light components, parking sensors, camera components, mounting hardware, brackets, reinforcement bar, trim pieces, and all other accessories are sold separately unless otherwise specified.

FAQS

1. Does this front bumper cover come painted?

No. This bumper cover is supplied with a smooth primed finish and requires professional painting before installation.

2. What is included with this bumper cover?

This listing includes one primed front bumper cover only. Grille, emblem, fog light components, parking sensors, camera components, mounting hardware, brackets, reinforcement bar, trim pieces, and all other accessories are sold separately unless otherwise specified.

3. Is this an OEM Nissan part?

No. This is an aftermarket replacement front bumper cover designed for compatible Nissan Sentra applications. It is manufactured to provide an OE-style appearance and fit.

4. Is professional installation recommended?

Yes. Professional installation is recommended to ensure proper fitment, paint preparation, alignment, and a factory-quality finish.

5. Is this bumper cover suitable for collision repair?

Yes. It is commonly used for collision repairs, insurance claim repairs, cosmetic restoration projects, and everyday body repair work.

6. Can this bumper cover be painted to match my vehicle?

Yes. The primed surface is specifically designed for professional paint preparation and color matching to achieve a seamless factory-inspired finish.

7. Will this front bumper cover arrive folded?

Some bumper covers may be folded for shipping to reduce shipping costs. The bumper cover will typically return to its original shape after unpacking and standard installation procedures.

Compatibility Disclaimer

Nissan® and Sentra® are registered trademarks of Nissan Motor Co., Ltd. Velnox Auto is not affiliated with, endorsed by, sponsored by, or otherwise connected to Nissan Motor Co., Ltd.  Vehicle manufacturer names, model names, trim levels, and model years are used solely for product identification and compatibility purposes. This product is an aftermarket replacement part and is not manufactured, authorized, or approved by Nissan Motor Co., Ltd.

Product Overview

Rear bumper damage can noticeably affect the appearance of your Nissan Sentra, even if the rest of the vehicle remains in excellent condition. Whether the damage was caused by a parking lot accident, a low-speed rear-end collision, loading cargo, or everyday driving, replacing the bumper cover is an effective way to restore your vehicle's clean, factory-inspired appearance. This 2016-2019 Nissan Sentra Rear Bumper Cover features an OE-style design engineered to complement the original body lines of compatible Sentra models. Finished with a smooth primed surface, it is ready for professional paint preparation and color matching. Once painted and installed, it helps restore the clean rear styling that has made the Nissan Sentra a dependable choice for everyday commuting. Designed for collision repair, cosmetic restoration, and routine vehicle maintenance, this replacement rear bumper cover provides a practical and cost-effective solution for replacing a cracked, scratched, or damaged bumper while preserving your vehicle's original appearance.

Inspired by the Original Sentra Design

The Nissan Sentra is designed to deliver practical transportation with modern styling, efficient performance, and everyday comfort. This OE-style replacement rear bumper cover is engineered to complement the original exterior design while helping restore your vehicle after parking damage, collision repairs, or years of daily driving.

Restore Your Sentra's Original Appearance

Replacing a damaged rear bumper cover helps restore the clean, finished appearance of your vehicle after everyday wear or accident damage. Once professionally painted and installed, it blends naturally with the factory body lines, helping your Sentra regain its refined, factory-inspired look.

When Should You Replace a Rear Bumper Cover?

Consider replacing your rear bumper cover if you notice:

• Cracked or broken bumper plastic

• Broken mounting tabs

• Deep scratches or heavy scuff marks

• Dents caused by parking or rear-end impacts

• Paint damage beyond repair

• Visible damage affecting the vehicle's appearance

Replacing a damaged bumper cover is often more practical and cost-effective than repairing severely damaged plastic components.

Why Choose an OE-Style Replacement?

OE-style replacement bumper covers are engineered to complement the original body design of compatible vehicles without changing their factory styling. The smooth primed finish provides an excellent surface for professional paint preparation and color matching, helping restore your vehicle's original appearance.

Primed Surface Ready for Paint

This bumper cover is supplied with a smooth primed finish to simplify the refinishing process. Benefits include:

• Ready for professional paint preparation

• Excellent surface for color matching

• Smooth, consistent finish

• Reduced preparation time before painting

• Helps achieve a factory-quality appearance

Professional painting and color matching are recommended before installation.

Common Repair Applications

This rear bumper cover is commonly used for:

• Rear-end collision repair

• Parking damage restoration

• Cosmetic bumper replacement

• Insurance claim repairs

• Exterior body restoration

• Daily driver maintenance

• Vehicle reconditioning before resale

Whether you're repairing accident damage or refreshing your Sentra's appearance, this replacement rear bumper cover helps complete a professional-quality repair.

Product Features

• OE-style rear bumper cover replacement
• Precision-molded to complement original body lines
• Durable automotive-grade construction
• Smooth primed finish ready for paint
• Helps restore original rear-end appearance
• Designed for collision repair and cosmetic restoration
• Suitable for professional body shops and experienced DIY installations

Important Information

This listing includes one primed rear bumper cover only. Reflectors, parking sensors, mounting hardware, brackets, reinforcement bar, trim pieces, and other accessories are sold separately unless otherwise specified.

FAQS

1. Does this rear bumper cover come painted?

No. This bumper cover is supplied with a smooth primed finish and requires professional painting before installation.

2. What is included with this bumper cover?

This listing includes one primed rear bumper cover only. Reflectors, parking sensors, mounting hardware, brackets, reinforcement bar, trim pieces, and other accessories are sold separately unless otherwise specified.

3. Is this an OEM Nissan part?

No. This is an aftermarket replacement rear bumper cover designed for compatible Nissan Sentra applications. It is manufactured to provide an OE-style appearance and fit.

4. Is professional installation recommended?

Yes. Professional installation is recommended to ensure proper fitment, paint preparation, alignment, and a factory-quality finish.

5. Is this bumper cover suitable for collision repair?

Yes. It is commonly used for rear-end collision repairs, cosmetic restoration, insurance claim repairs, and everyday body repair work.

6. Can this bumper cover be painted to match my vehicle?

Yes. The primed surface is specifically designed for professional paint preparation and color matching to achieve a seamless factory-inspired finish.

7. Will this rear bumper cover arrive folded?

Some bumper covers may be folded for shipping to reduce shipping costs. The bumper cover will typically return to its original shape after unpacking and standard installation procedures.

Compatibility Disclaimer

Nissan® and Sentra® are registered trademarks of Nissan Motor Co., Ltd. Velnox Auto is not affiliated with, endorsed by, sponsored by, or otherwise connected to Nissan Motor Co., Ltd. Vehicle manufacturer names, model names, trim levels, and model years are used solely for product identification and compatibility purposes. This product is an aftermarket replacement part and is not manufactured, authorized, or approved by Nissan Motor Co., Ltd.

Product Overview

Front-end damage can quickly affect the appearance of your Nissan Sentra, even after a relatively minor accident. Whether your bumper has been damaged by road debris, a parking lot incident, or everyday driving, replacing the bumper cover is one of the most effective ways to restore your vehicle's clean, factory-inspired appearance. This 2016-2019 Nissan Sentra Front Bumper Cover features an OE-style design engineered to complement the original body lines of compatible Sentra models. Finished with a smooth primed surface, it is ready for professional paint preparation and color matching. Once painted and installed, it helps restore the clean, contemporary front-end styling that has made the Nissan Sentra a popular choice for everyday commuting.  Designed for collision repair, cosmetic restoration, and routine vehicle maintenance, this replacement front bumper cover provides a practical and cost-effective solution for replacing a cracked, scratched, or damaged bumper while maintaining your vehicle's original appearance.

Inspired by the Original Sentra Design

The Nissan Sentra combines a compact footprint with modern styling, excellent everyday practicality, and comfortable driving dynamics. This OE-style replacement front bumper cover is designed to complement the original exterior design while helping restore your vehicle after collision damage, parking incidents, or years of daily use.

Restore Your Sentra's Original Appearance

A replacement front bumper cover helps restore the clean, finished appearance of your vehicle after accident damage. Once professionally painted and installed, it blends naturally with the factory body lines, helping your Sentra regain its refined, factory-inspired look.

When Should You Replace a Front Bumper Cover?

Consider replacing your front bumper cover if you notice:

• Cracked or broken bumper plastic

• Broken mounting tabs

• Deep scratches or heavy scuff marks

• Dents caused by minor collisions

• Paint damage beyond repair

• Visible damage affecting the vehicle's appearance

Replacing a damaged bumper cover is often more practical and cost-effective than repairing severely damaged plastic components.

Why Choose an OE-Style Replacement?

OE-style replacement bumper covers are engineered to complement the original body design of compatible vehicles without changing their factory styling. The smooth primed finish provides an excellent surface for professional paint preparation and color matching, helping restore your vehicle's original appearance.

Primed Surface Ready for Paint

This bumper cover is supplied with a smooth primed finish to simplify the refinishing process.

Benefits include:

• Ready for professional paint preparation

• Excellent surface for color matching

• Smooth, consistent finish

• Reduced preparation time before painting

• Helps achieve a factory-quality appearance

Professional painting and color matching are recommended before installation.

Common Repair Applications

This front bumper cover is commonly used for:

• Front-end collision repair

• Cosmetic bumper replacement

• Insurance claim repairs

• Exterior body restoration

• Daily driver maintenance

• Vehicle reconditioning before resale

• Professional collision repair projects

Whether you're repairing accident damage or refreshing your Sentra's appearance, this replacement bumper cover helps complete a professional-quality repair.

Product Features

• OE-style front bumper cover replacement
• Precision-molded to complement original body lines
• Durable automotive-grade construction
• Smooth primed finish ready for paint
• Helps restore original front-end appearance
• Designed for collision repair and cosmetic restoration
• Suitable for professional body shops and experienced DIY installations

Important Information

This listing includes one primed front bumper cover only. Grille, emblem, fog light components, parking sensors, mounting hardware, brackets, reinforcement bar, and other accessories are sold separately unless otherwise specified.

FAQS

1. Does this front bumper cover come painted?

No. This bumper cover is supplied with a smooth primed finish and requires professional painting before installation.

2. What is included with this bumper cover?

This listing includes one primed front bumper cover only. Grille, emblem, fog light components, parking sensors, mounting hardware, brackets, reinforcement bar, trim pieces, and other accessories are sold separately unless otherwise specified.

3. Is this an OEM Nissan part?

No. This is an aftermarket replacement front bumper cover designed for compatible Nissan Sentra applications. It is manufactured to provide an OE-style appearance and fit.

4. Is professional installation recommended?

Yes. Professional installation is recommended to ensure proper fitment, paint preparation, alignment, and a factory-quality finish.

5. Is this bumper cover suitable for collision repair?

Yes. It is commonly used for collision repairs, cosmetic restoration, insurance claim repairs, and everyday body repair work.

6. Can this bumper cover be painted to match my vehicle?

Yes. The primed surface is specifically designed for professional paint preparation and color matching to achieve a seamless factory-inspired finish.

7. Will this front bumper cover arrive folded?

Some bumper covers may be folded for shipping to reduce shipping costs. The bumper cover will typically return to its original shape after unpacking and standard installation procedures.

Compatibility Disclaimer

Nissan® and Sentra® are registered trademarks of Nissan Motor Co., Ltd. Velnox Auto is not affiliated with, endorsed by, sponsored by, or otherwise connected to Nissan Motor Co., Ltd. Vehicle manufacturer names, model names, trim levels, and model years are used solely for product identification and compatibility purposes. This product is an aftermarket replacement part and is not manufactured, authorized, or approved by Nissan Motor Co., Ltd.

Product Overview

Rear bumper damage can quickly diminish the clean, modern appearance of your Nissan Rogue. Whether the damage resulted from a parking lot incident, a low-speed rear-end collision, loading cargo, or everyday driving, replacing the bumper cover is an effective way to restore your SUV's factory-inspired exterior. This 2021-2023 Nissan Rogue Rear Bumper Cover features an OE-style design that complements the original body lines of compatible Rogue models. Finished with a smooth primed surface, it is ready for professional paint preparation and color matching. Once painted and installed, it helps restore the contemporary rear styling introduced with the latest generation Nissan Rogue. Designed for collision repair, cosmetic restoration, and everyday vehicle maintenance, this replacement rear bumper cover provides a practical and cost-effective solution for replacing a cracked, scratched, or damaged bumper.

Built to Complement Nissan's Latest SUV Design

The latest-generation Nissan Rogue features a more refined exterior with sculpted body lines, a wider stance, and a contemporary SUV profile. This OE-style replacement rear bumper cover is engineered to complement the original rear styling while helping restore your vehicle after collision damage, parking mishaps, or everyday wear.

Restore Your Rogue's Original Appearance

Replacing a damaged rear bumper cover helps bring back the clean, finished appearance of your vehicle while completing professional collision repairs or exterior restoration projects. After proper paint preparation and installation, this bumper cover blends naturally with the original body design, helping your Rogue maintain its modern factory-inspired look.

When Should You Replace a Rear Bumper Cover?

Consider replacing your rear bumper cover if you notice:

• Cracked or broken bumper plastic

• Broken mounting tabs

• Deep scratches or heavy scuff marks

• Dents caused by parking or rear-end impacts

• Paint damage beyond repair

• Visible collision damage affecting the rear bumper

Replacing a damaged bumper cover is often a more practical and cost-effective solution than repairing severely damaged plastic components.

Why Choose an OE-Style Replacement?

OE-style replacement bumper covers are engineered to complement the original body design of compatible vehicles without changing their factory styling. The smooth primed finish provides an excellent surface for professional paint preparation and color matching, helping restore your vehicle's original appearance.

Primed Surface Ready for Paint

This bumper cover is supplied with a smooth primed finish to simplify the refinishing process.

Benefits include:

• Ready for professional paint preparation

• Excellent surface for color matching

• Smooth, consistent finish

• Reduced preparation time before painting

• Helps achieve a factory-quality appearance

Professional painting and color matching are recommended before installation.

Common Repair Applications

This rear bumper cover is commonly used for:

• Rear-end collision repair

• Parking damage restoration

• Cosmetic bumper replacement

• Insurance claim repairs

• Exterior body restoration

• Daily driver maintenance

• Vehicle reconditioning before resale

Whether you're repairing accident damage or restoring your Rogue's appearance, this replacement rear bumper cover helps complete a professional-quality repair.

Product Features

• OE-style rear bumper cover replacement
• Precision-molded to complement original body lines
• Durable automotive-grade construction
• Smooth primed finish ready for paint
• Helps restore original rear-end appearance
• Designed for collision repair and cosmetic restoration
• Suitable for professional body shops and experienced DIY installations

Important Information

This listing includes one primed rear bumper cover only. Reflectors, parking sensors, camera components, mounting hardware, brackets, reinforcement bars, trim pieces, and all other accessories are sold separately unless otherwise specified.

FAQS

1. Does this rear bumper cover come painted?

No. This bumper cover is supplied with a smooth primed finish and requires professional painting before installation.

2. What is included with this bumper cover?

This listing includes one primed rear bumper cover only. Reflectors, parking sensors, camera components, mounting hardware, brackets, reinforcement bars, trim pieces, and all other accessories are sold separately unless otherwise specified.

3. Is this an OEM Nissan part?

No. This is an aftermarket replacement rear bumper cover designed for compatible Nissan Rogue applications. It is manufactured to provide an OE-style appearance and fit.

4. Is professional installation recommended?

Yes. Professional installation is recommended to ensure proper alignment, paint preparation, and a factory-quality finish.

5. Can this bumper cover be used for collision repair?

Yes. It is commonly used for rear-end collision repairs, cosmetic restoration projects, insurance claim repairs, and everyday body repair work.

6. Can this bumper cover be painted to match my vehicle?

Yes. The primed surface is specifically designed for professional paint preparation and color matching to achieve a seamless factory-inspired finish.

7. Will this rear bumper cover arrive folded?

Some bumper covers may be folded for shipping to reduce shipping costs. The bumper cover will typically return to its original shape after unpacking and standard installation procedures.

Compatibility Disclaimer

Nissan® and Rogue® are registered trademarks of Nissan Motor Co., Ltd. Velnox Auto is not affiliated with, endorsed by, sponsored by, or otherwise connected to Nissan Motor Co., Ltd. Vehicle manufacturer names, model names, trim levels, and model years are used solely for product identification and compatibility purposes. This product is an aftermarket replacement part and is not manufactured, authorized, or approved by Nissan Motor Co., Ltd.

Product Overview

Front-end damage can quickly change the appearance of your Nissan Rogue, even after a relatively minor accident. Whether your bumper has been affected by road debris, a parking lot incident, or everyday driving, replacing a damaged bumper cover is an effective way to restore your vehicle's clean, modern appearance. This 2021-2023 Nissan Rogue Front Bumper Cover features an OE-style design engineered to complement the original body lines of compatible Rogue models. Finished with a smooth primed surface, it is ready for professional paint preparation and color matching. Once refinished and installed, it helps restore the bold front-end styling introduced with the latest generation Nissan Rogue. Designed for collision repair, cosmetic restoration, and routine vehicle maintenance, this replacement front bumper cover offers a practical and cost-effective solution for restoring your SUV's factory-inspired appearance.

Inspired by Nissan's Latest SUV Design

The 2021-2023 Nissan Rogue introduced a completely redesigned exterior featuring a wider V-Motion grille, sculpted body lines, and a more premium SUV appearance. This OE-style replacement front bumper cover is designed to complement those original styling elements while restoring your vehicle after collision damage or everyday wear.

Restore Your Rogue's Original Appearance

A replacement front bumper cover helps restore the clean, finished appearance of your vehicle after accident damage. Following professional paint preparation and installation, it blends naturally with the original exterior, helping your Rogue maintain the bold styling of the latest generation model.

When Should You Replace a Front Bumper Cover?

Consider replacing your front bumper cover if you notice:

• Cracked or broken bumper plastic

• Broken mounting tabs

• Deep scratches or heavy scuff marks

• Collision-related dents

• Paint damage beyond repair

• Visible damage affecting your vehicle's appearance

Replacing a damaged bumper cover is often a more practical and cost-effective solution than repairing severely damaged plastic components.

Why Choose an OE-Style Replacement?

OE-style replacement bumper covers are designed to complement the original body design of compatible vehicles without altering their factory styling. The smooth primed finish provides an excellent foundation for professional paint preparation and color matching, helping restore your vehicle's original appearance.

Primed Surface Ready for Paint

This bumper cover is supplied with a smooth primed finish to simplify the refinishing process.

Benefits include:

• Ready for professional paint preparation

• Excellent surface for color matching

• Smooth, consistent finish

• Reduced preparation time before painting

• Helps achieve a factory-quality appearance

Professional painting and color matching are recommended before installation.

Common Repair Applications

This front bumper cover is commonly used for:

• Front-end collision repair

• Cosmetic bumper replacement

• Insurance claim repairs

• Exterior body restoration

• Daily driver maintenance

• Vehicle reconditioning before resale

• Professional collision repair projects

Whether you're repairing accident damage or restoring your Rogue's appearance, this replacement bumper cover helps complete a professional-quality repair.

Product Features

• OE-style front bumper cover replacement
• Precision-molded to complement original body lines
• Durable automotive-grade construction
• Smooth primed finish ready for paint
• Helps restore original front-end appearance
• Designed for collision repair and cosmetic restoration
• Suitable for professional body shops and experienced DIY installations

Important Information

This listing includes one primed front bumper cover only. Grilles, emblems, fog light components, parking sensors, camera systems, mounting hardware, brackets, reinforcement bars, and all other accessories are sold separately unless otherwise specified.

FAQS

1. Does this front bumper cover come painted?

No. This bumper cover is supplied with a smooth primed finish and requires professional painting before installation.

2. What is included with this bumper cover?

This listing includes one primed front bumper cover only. Grilles, emblems, fog light components, parking sensors, camera systems, mounting hardware, brackets, reinforcement bars, trim pieces, and all other accessories are sold separately unless otherwise specified.

3. Is this an OEM Nissan part?

No. This is an aftermarket replacement front bumper cover designed for compatible Nissan Rogue applications. It is manufactured to provide an OE-style appearance and fit.

4. Is professional installation recommended?

Yes. Professional installation is recommended to help ensure proper alignment, paint preparation, and a factory-quality finish.

5. Is this bumper cover suitable for collision repair?

Yes. It is commonly used for collision repairs, cosmetic restoration, insurance claim repairs, and everyday body repair work.

6. Can this bumper cover be painted to match my vehicle?

Yes. The primed surface is specifically designed for professional paint preparation and color matching to achieve a seamless factory-inspired finish.

7. Will this front bumper cover arrive folded?

Some bumper covers may be folded for shipping to reduce shipping costs. The bumper cover will typically return to its original shape after unpacking and standard installation procedures.

Compatibility Disclaimer

Nissan® and Rogue® are registered trademarks of Nissan Motor Co., Ltd. Velnox Auto is not affiliated with, endorsed by, sponsored by, or otherwise connected to Nissan Motor Co., Ltd. Vehicle manufacturer names, model names, trim levels, and model years are used solely for product identification and compatibility purposes. This product is an aftermarket replacement part and is not manufactured, authorized, or approved by Nissan Motor Co., Ltd.

Product Overview

A damaged rear bumper can noticeably affect the appearance of your Nissan Rogue. Whether the damage resulted from a parking lot incident, a low-speed rear-end collision, loading cargo, or everyday driving, replacing the bumper cover is one of the most effective ways to restore your vehicle's clean exterior appearance. This 2014-2016 Nissan Rogue Rear Bumper Cover features an OE-style design that follows the original body lines of compatible Rogue models. Finished with a smooth primed surface, it is ready for professional paint preparation and color matching. Once painted and installed, it helps restore the modern rear styling introduced with the second-generation Nissan Rogue. Designed for collision repair, cosmetic restoration, and everyday vehicle maintenance, this replacement rear bumper cover provides a practical and cost-effective solution for replacing a cracked, scratched, or damaged bumper while maintaining your vehicle's factory-inspired appearance.

Built to Match the Original Rogue Design

The second-generation Nissan Rogue introduced a more aerodynamic exterior, refined body lines, and improved everyday practicality for drivers and families alike. This OE-style replacement rear bumper cover is designed to complement the original rear styling while helping restore your vehicle after accident damage, parking mishaps, or years of everyday use.

Restore Your Rogue's Original Appearance

A replacement rear bumper cover can dramatically improve the appearance of your Rogue while helping complete professional collision repairs or exterior restoration projects. After professional paint preparation and installation, it blends naturally with the original body design, helping restore the clean, factory-inspired look of your vehicle.

When Should You Replace a Rear Bumper Cover?

Consider replacing your rear bumper cover if you notice:

• Cracked or broken bumper plastic

• Broken mounting tabs

• Deep scratches or heavy scuff marks

• Dents caused by parking or rear-end impacts

• Paint damage that cannot be refinished

• Visible collision damage affecting the rear bumper

Replacing a damaged bumper cover is often a more practical and cost-effective solution than repairing severely damaged plastic components.

Why Choose an OE-Style Replacement?

OE-style replacement bumper covers are engineered to complement the original body design of compatible vehicles. The smooth primed finish provides an excellent foundation for professional paint preparation, helping achieve a seamless color match while restoring your vehicle's original appearance.

Primed Surface Ready for Paint

This bumper cover is supplied with a smooth primed finish to simplify the refinishing process.

Benefits include:

• Ready for professional paint preparation

• Excellent surface for color matching

• Smooth, consistent finish

• Reduced preparation time before painting

• Helps achieve a factory-quality appearance

Professional painting and color matching are recommended before installation.

Common Repair Applications

This rear bumper cover is commonly used for:

• Rear-end collision repair

• Parking damage restoration

• Cosmetic bumper replacement

• Insurance claim repairs

• Exterior body restoration

• Daily driver maintenance

• Vehicle reconditioning before resale

Whether you're repairing accident damage or refreshing your Rogue's appearance, this replacement rear bumper cover helps complete a professional-quality repair.

Product Features

• OE-style rear bumper cover replacement
• Precision-molded to complement original body lines
• Durable automotive-grade construction
• Smooth primed finish ready for paint
• Helps restore original rear-end appearance
• Designed for collision repair and cosmetic restoration
• Suitable for professional body shops and experienced DIY installations

Important Information

This listing includes one primed rear bumper cover only. Reflectors, parking sensors, mounting hardware, brackets, reinforcement components, trim pieces, and other accessories are sold separately unless otherwise specified.

FAQS

1. Does this rear bumper cover come painted?

No. This bumper cover is supplied with a smooth primed finish and requires professional painting before installation.

2. What is included with this bumper cover?

This listing includes one primed rear bumper cover only. Reflectors, parking sensors, mounting hardware, brackets, reinforcement bars, trim pieces, and all other accessories are sold separately unless otherwise specified.

3. Is this an OEM Nissan part?

No. This is an aftermarket replacement rear bumper cover designed for compatible Nissan Rogue applications. It is manufactured to provide an OE-style appearance and fit.

4. Is professional installation recommended?

Yes. Professional installation is recommended to ensure proper alignment, paint preparation, and a factory-quality finish.

5. Can this bumper cover be used for collision repair?

Yes. It is commonly used for rear-end collision repairs, cosmetic restoration projects, insurance claim repairs, and everyday body repair work.

6. Can this bumper cover be painted to match my vehicle?

Yes. The primed surface is specifically designed for professional paint preparation and color matching to achieve a seamless factory-inspired finish.

7. Will this rear bumper cover arrive folded?

Some bumper covers may be folded for shipping to reduce shipping costs. The bumper cover will typically return to its original shape after unpacking and standard installation procedures.

Compatibility Disclaimer

Nissan® and Rogue® are registered trademarks of Nissan Motor Co., Ltd. Velnox Auto is not affiliated with, endorsed by, sponsored by, or otherwise connected to Nissan Motor Co., Ltd. Vehicle manufacturer names, model names, trim levels, and model years are used solely for product identification and compatibility purposes. This product is an aftermarket replacement part and is not manufactured, authorized, or approved by Nissan Motor Co., Ltd.

Product Overview

A damaged front bumper can significantly affect the appearance of your Nissan Rogue. Whether the damage was caused by road debris, a parking lot incident, or a minor collision, replacing the bumper cover is one of the most effective ways to restore your vehicle's clean exterior appearance. This 2014-2016 Nissan Rogue Front Bumper Cover features an OE-style design that complements the original body lines of compatible Rogue models. Finished with a smooth primed surface, it is ready for professional paint preparation and color matching. Once painted and installed, it helps restore the modern front-end styling introduced with the second-generation Nissan Rogue. Designed for collision repair, cosmetic restoration, and everyday vehicle maintenance, this replacement front bumper cover offers a practical and cost-effective solution for replacing a cracked, scratched, or damaged bumper.

Designed Around the Original Rogue Styling

The second-generation Nissan Rogue features aerodynamic body lines, a modern SUV profile, and a practical design built for everyday driving. This OE-style replacement front bumper cover is designed to complement the original exterior styling while restoring your Rogue after collision damage, parking incidents, or everyday wear.

Restore the Original Appearance

Replacing a damaged bumper cover helps restore the clean, finished appearance of your vehicle while completing professional collision repairs or exterior restoration projects. After proper paint preparation and installation, this bumper cover blends naturally with the original body design, helping your Rogue regain its factory-inspired appearance.

When Should You Replace a Front Bumper Cover?

Consider replacing your front bumper cover if you notice:

• Cracks or broken plastic

• Broken mounting tabs

• Deep scratches or gouges

• Large dents from minor collisions

• Paint damage that cannot be repaired

• Visible impact damage affecting the bumper's appearance

Replacing a damaged bumper cover is often more practical and economical than repairing severely damaged plastic components.

Why Choose an OE-Style Replacement?

OE-style replacement bumper covers are designed to complement the original body design of compatible vehicles. The smooth primed surface provides an ideal foundation for professional paint preparation and color matching, helping achieve a seamless finish that restores your vehicle's original appearance.

Primed Surface Ready for Paint

This bumper cover arrives with a smooth primed finish to simplify the refinishing process.

Benefits include:

• Easier paint preparation

• Professional color matching

• Consistent surface quality

• Reduced preparation time before painting

• Smooth foundation for a factory-quality finish

Professional painting and color matching are recommended before installation.

Common Repair Applications

This front bumper cover is commonly used for:

• Front-end collision repair

• Cosmetic bumper replacement

• Insurance claim repairs

• Exterior body repair projects

• Vehicle restoration

• Daily driver maintenance

• Vehicle reconditioning before resale

Whether you're repairing accident damage or restoring your Rogue's appearance, this replacement bumper cover helps complete a professional-quality repair.

Product Features

• OE-style front bumper cover replacement
• Precision-molded to complement original body lines
• Durable automotive-grade construction
• Smooth primed finish ready for paint
• Helps restore original exterior appearance
• Designed for collision repair and restoration
• Suitable for professional body shops and experienced DIY installations

Important Information

This listing includes one primed front bumper cover only. Grilles, emblems, fog lights, parking sensors, mounting hardware, brackets, reinforcement components, and other accessories are sold separately unless otherwise specified.

FAQS

1. Does this front bumper cover come painted?

No. This bumper cover is supplied in a smooth primed finish and requires professional painting before installation.

2. What is included with this bumper cover?

This listing includes one primed front bumper cover only. Grilles, emblems, fog lights, parking sensors, mounting hardware, brackets, reinforcement bars, trim pieces, and other accessories are sold separately unless otherwise specified.

3. Is this an OEM Nissan part?

No. This is an aftermarket replacement front bumper cover designed for compatible Nissan Rogue applications. It is manufactured to provide an OE-style appearance and fit.

4. Is professional installation recommended?

Yes. Professional installation is recommended to ensure proper fitment, paint preparation, alignment, and a factory-quality finish.

5. Can this bumper cover be used for collision repair?

Yes. This bumper cover is commonly used for collision repairs, insurance claim repairs, cosmetic restoration projects, and everyday body repair work.

6. Can this bumper cover be painted to match my vehicle?

Yes. The primed surface is specifically designed for professional paint preparation and color matching to achieve a seamless factory-inspired appearance.

7. Will this front bumper cover arrive folded?

Some bumper covers may be folded for shipping to reduce shipping costs. The bumper cover will typically return to its original shape after unpacking and standard installation procedures.

Compatibility Disclaimer

Nissan® and Rogue® are registered trademarks of Nissan Motor Co., Ltd. Velnox Auto is not affiliated with, endorsed by, sponsored by, or otherwise connected to Nissan Motor Co., Ltd. Vehicle manufacturer names, model names, trim levels, and model years are used solely for product identification and compatibility purposes. This product is an aftermarket replacement part and is not manufactured, authorized, or approved by Nissan Motor Co., Ltd.

Product Overview

A damaged rear bumper can significantly affect the appearance of your Nissan Rogue. Whether the damage was caused by a parking lot accident, a low-speed rear-end collision, loading cargo, or everyday driving, replacing the bumper cover is one of the most effective ways to restore your vehicle's clean exterior appearance. This 2017-2019 Nissan Rogue Rear Bumper Cover features an OE-style design that complements the original body lines of compatible Rogue models. Finished with a smooth primed surface, it is ready for professional paint preparation and color matching. Once painted and installed, it helps restore the bold rear styling that has made the Nissan Rogue one of America's most popular compact SUVs. Designed for collision repair, cosmetic restoration, and everyday vehicle maintenance, this replacement rear bumper cover offers a practical and cost-effective solution for replacing a cracked, scratched, or damaged bumper.

Designed Around the Original Rogue Styling

The Nissan Rogue is recognized for its modern SUV styling, spacious interior, and everyday versatility, making it a popular choice for families, commuters, and weekend travelers. This OE-style replacement rear bumper cover is designed to complement the original exterior styling while restoring your Rogue after collision damage, parking incidents, or everyday wear.

Restore the Original Appearance

Replacing a damaged rear bumper cover helps restore the clean, finished appearance of your vehicle while completing professional collision repairs or exterior restoration projects. After proper paint preparation and installation, this bumper cover blends naturally with the original body design, helping your Rogue regain its factory-inspired appearance.

When Should You Replace a Rear Bumper Cover?

Consider replacing your rear bumper cover if you notice:

• Cracks or broken plastic

• Broken mounting tabs

• Deep scratches or gouges

• Dents caused by parking or rear-end impacts

• Paint damage that cannot be repaired

• Visible impact damage affecting the bumper's appearance

Replacing a damaged bumper cover is often more practical and economical than repairing severely damaged plastic components.

Why Choose an OE-Style Replacement?

OE-style replacement bumper covers are designed to complement the original body design of compatible vehicles. The smooth primed surface provides an ideal foundation for professional paint preparation and color matching, helping achieve a seamless finish that restores your vehicle's original appearance.

Primed Surface Ready for Paint

This bumper cover arrives with a smooth primed finish to simplify the refinishing process.

Benefits include:

• Easier paint preparation

• Professional color matching

• Consistent surface quality

• Reduced preparation time before painting

• Smooth foundation for a factory-quality finish

Professional painting and color matching are recommended before installation.

Common Repair Applications

This rear bumper cover is commonly used for:

• Rear-end collision repair

• Parking damage restoration

• Cosmetic bumper replacement

• Insurance claim repairs

• Exterior body repair projects

• Vehicle restoration

• Daily driver maintenance

• Vehicle reconditioning before resale

Whether you're repairing accident damage or restoring your Rogue's appearance, this replacement rear bumper cover helps complete a professional-quality repair.

Product Features

• OE-style rear bumper cover replacement
• Precision-molded to complement original body lines
• Durable automotive-grade construction
• Smooth primed finish ready for paint
• Helps restore original exterior appearance
• Designed for collision repair and restoration
• Suitable for professional body shops and experienced DIY installations

Important Information

This listing includes one primed rear bumper cover only. Reflectors, parking sensors, mounting hardware, brackets, reinforcement components, trim pieces, and other accessories are sold separately unless otherwise specified.

FAQS

1. Does this rear bumper cover come painted?

No. This bumper cover is supplied in a smooth primed finish and requires professional painting before installation.

2. What is included with this bumper cover?

This listing includes one primed rear bumper cover only. Reflectors, parking sensors, mounting hardware, brackets, reinforcement bars, trim pieces, and other accessories are sold separately unless otherwise specified.

3. Is this an OEM Nissan part?

No. This is an aftermarket replacement rear bumper cover designed for compatible Nissan Rogue applications. It is manufactured to provide an OE-style appearance and fit.

4. Is professional installation recommended?

Yes. Professional installation is recommended to ensure proper fitment, paint preparation, alignment, and a factory-quality finish.

5. Can this bumper cover be used for collision repair?

Yes. This bumper cover is commonly used for rear-end collision repairs, insurance claim repairs, cosmetic restoration projects, and everyday body repair work.

6. Can this bumper cover be painted to match my vehicle?

Yes. The primed surface is specifically designed for professional paint preparation and color matching to achieve a seamless factory-inspired appearance.

7. Will this rear bumper cover arrive folded?

Some bumper covers may be folded for shipping to reduce shipping costs. The bumper cover will typically return to its original shape after unpacking and standard installation procedures.

Compatibility Disclaimer

Nissan® and Rogue® are registered trademarks of Nissan Motor Co., Ltd. Velnox Auto is not affiliated with, endorsed by, sponsored by, or otherwise connected to Nissan Motor Co., Ltd. Vehicle manufacturer names, model names, trim levels, and model years are used solely for product identification and compatibility purposes. This product is an aftermarket replacement part and is not manufactured, authorized, or approved by Nissan Motor Co., Ltd.

Product Overview

A damaged front bumper can significantly affect the appearance of your Nissan Rogue. Whether the damage was caused by road debris, a parking lot incident, or a minor collision, replacing the bumper cover is one of the most effective ways to restore your vehicle's clean exterior appearance. This 2017-2019 Nissan Rogue Front Bumper Cover features an OE-style design that complements the original body lines of compatible Rogue models. Finished with a smooth primed surface, it is ready for professional paint preparation and color matching. Once painted and installed, it helps restore the bold front-end styling that has made the Nissan Rogue one of America's most popular compact SUVs. Designed for collision repair, cosmetic restoration, and everyday vehicle maintenance, this replacement front bumper cover offers a practical and cost-effective solution for replacing a cracked, scratched, or damaged bumper.

Designed Around the Original Rogue Styling

The Nissan Rogue is known for its modern SUV styling, spacious interior, and everyday versatility, making it a popular choice for families, commuters, and weekend travelers. This OE-style replacement front bumper cover is designed to complement the original exterior styling while restoring your Rogue after collision damage, parking incidents, or everyday wear.

Restore the Original Appearance 

Replacing a damaged bumper cover helps restore the clean, finished appearance of your vehicle while completing professional collision repairs or exterior restoration projects. After proper paint preparation and installation, this bumper cover blends naturally with the original body design, helping your Rogue regain its factory-inspired appearance.

When Should You Replace a Front Bumper Cover?

Consider replacing your front bumper cover if you notice:

• Cracks or broken plastic

• Broken mounting tabs

• Deep scratches or gouges

• Large dents from minor collisions

• Paint damage that cannot be repaired

• Visible impact damage affecting the bumper's appearance

Replacing a damaged bumper cover is often more practical and economical than repairing severely damaged plastic components.

Why Choose an OE-Style Replacement?

OE-style replacement bumper covers are designed to complement the original body design of compatible vehicles. The smooth primed surface provides an ideal foundation for professional paint preparation and color matching, helping achieve a seamless finish that restores your vehicle's original appearance.

Primed Surface Ready for Paint

This bumper cover arrives with a smooth primed finish to simplify the refinishing process.

Benefits include:

• Easier paint preparation

• Professional color matching

• Consistent surface quality

• Reduced preparation time before painting

• Smooth foundation for a factory-quality finish

Professional painting and color matching are recommended before installation.

Common Repair Applications

This front bumper cover is commonly used for:

• Front-end collision repair

• Cosmetic bumper replacement

• Insurance claim repairs

• Exterior body repair projects

• Vehicle restoration

• Daily driver maintenance

• Vehicle reconditioning before resale

Whether you're repairing accident damage or restoring your Rogue's appearance, this replacement bumper cover helps complete a professional-quality repair.

Product Features

• OE-style front bumper cover replacement
• Precision-molded to complement original body lines
• Durable automotive-grade construction
• Smooth primed finish ready for paint
• Helps restore original exterior appearance
• Designed for collision repair and restoration
• Suitable for professional body shops and experienced DIY installations

Important Information

This listing includes one primed front bumper cover only. Grilles, emblems, fog lights, parking sensors, mounting hardware, brackets, reinforcement components, and other accessories are sold separately unless otherwise specified.

FAQS

1. Does this front bumper cover come painted?

No. This bumper cover is supplied in a smooth primed finish and requires professional painting before installation.

2. What is included with this bumper cover?

This listing includes one primed front bumper cover only. Grilles, emblems, fog lights, parking sensors, mounting hardware, brackets, reinforcement bars, trim pieces, and other accessories are sold separately unless otherwise specified.

3. Is this an OEM Nissan part?

No. This is an aftermarket replacement front bumper cover designed for compatible Nissan Rogue applications. It is manufactured to provide an OE-style appearance and fit.

4. Is professional installation recommended?

Yes. Professional installation is recommended to ensure proper fitment, paint preparation, alignment, and a factory-quality finish.

5. Can this bumper cover be used for collision repair?

Yes. This bumper cover is commonly used for collision repairs, insurance claim repairs, cosmetic restoration projects, and everyday body repair work.

6. Can this bumper cover be painted to match my vehicle?

Yes. The primed surface is specifically designed for professional paint preparation and color matching to achieve a seamless factory-inspired appearance.

7. Will this front bumper cover arrive folded?

Some bumper covers may be folded for shipping to reduce shipping costs. The bumper cover will typically return to its original shape after unpacking and standard installation procedures.

Compatibility Disclaimer

Nissan® and Rogue® are registered trademarks of Nissan Motor Co., Ltd. Velnox Auto is not affiliated with, endorsed by, sponsored by, or otherwise connected to Nissan Motor Co., Ltd. Vehicle manufacturer names, model names, trim levels, and model years are used solely for product identification and compatibility purposes. This product is an aftermarket replacement part and is not manufactured, authorized, or approved by Nissan Motor Co., Ltd.

Product Overview

A damaged rear bumper can significantly affect the appearance of your Nissan Altima. Whether the damage was caused by a parking lot accident, a low-speed rear-end collision, loading cargo, or everyday driving, replacing the bumper cover is one of the most effective ways to restore your vehicle's clean exterior appearance. This 2019-2022 Nissan Altima Rear Bumper Cover features an OE-style design that complements the original body lines of compatible Altima models. Finished with a smooth primed surface, it is ready for professional paint preparation and color matching. Once painted and installed, it helps restore the modern rear styling that complements the sleek exterior design of the 2019-2022 Nissan Altima. Designed for collision repair, cosmetic restoration, and everyday vehicle maintenance, this replacement rear bumper cover offers a practical and cost-effective solution for replacing a cracked, scratched, or damaged bumper.

Designed Around the Original Altima Styling

The 2019-2022 Nissan Altima features sculpted body lines, a sleek fastback-inspired profile, and a refined rear design that give the sedan its modern appearance. This OE-style replacement rear bumper cover is designed to complement the original styling while helping restore your vehicle after collision damage, parking incidents, or everyday wear.

Restore the Original Appearance

Replacing a damaged rear bumper cover helps restore the clean, finished appearance of your vehicle while completing professional collision repairs or exterior restoration projects. After proper paint preparation and installation, this bumper cover blends naturally with the original body design, helping your Altima regain its factory-inspired appearance.

When Should You Replace a Rear Bumper Cover?

Consider replacing your rear bumper cover if you notice:

• Cracks or broken plastic

• Broken mounting tabs

• Deep scratches or gouges

• Dents caused by parking or rear-end impacts

• Paint damage that cannot be repaired

• Visible impact damage affecting the bumper's appearance

Replacing a damaged bumper cover is often more practical and economical than repairing severely damaged plastic components.

Why Choose an OE-Style Replacement?

OE-style replacement bumper covers are designed to complement the original body design of compatible vehicles. The smooth primed surface provides an ideal foundation for professional paint preparation and color matching, helping achieve a seamless finish that restores your vehicle's original appearance.

Primed Surface Ready for Paint

This bumper cover arrives with a smooth primed finish to simplify the refinishing process.

Benefits include:

• Easier paint preparation

• Professional color matching

• Consistent surface quality

• Reduced preparation time before painting

• Smooth foundation for a factory-quality finish

Professional painting and color matching are recommended before installation.

Common Repair Applications

This rear bumper cover is commonly used for:

• Rear-end collision repair

• Parking damage restoration

• Cosmetic bumper replacement

• Insurance claim repairs

• Exterior body repair projects

• Vehicle restoration

• Daily driver maintenance

• Vehicle reconditioning before resale

Whether you're repairing accident damage or restoring your Altima's appearance, this replacement rear bumper cover helps complete a professional-quality repair.

Product Features

• OE-style rear bumper cover replacement
• Precision-molded to complement original body lines
• Durable automotive-grade construction
• Smooth primed finish ready for paint
• Helps restore original exterior appearance
• Designed for collision repair and restoration
• Suitable for professional body shops and experienced DIY installations

Important Information

This listing includes one primed rear bumper cover only. Reflectors, parking sensors, mounting hardware, brackets, reinforcement components, trim pieces, and other accessories are sold separately unless otherwise specified.

FAQS

1. Does this rear bumper cover come painted?

No. This bumper cover is supplied in a smooth primed finish and requires professional painting before installation.

2. What is included with this bumper cover?

This listing includes one primed rear bumper cover only. Reflectors, parking sensors, mounting hardware, brackets, reinforcement bars, trim pieces, and other accessories are sold separately unless otherwise specified.

3. Is this an OEM Nissan part?

No. This is an aftermarket replacement rear bumper cover designed for compatible Nissan Altima applications. It is manufactured to provide an OE-style appearance and fit.

4. Is professional installation recommended?

Yes. Professional installation is recommended to ensure proper fitment, paint preparation, alignment, and a factory-quality finish.

5. Can this bumper cover be used for collision repair?

Yes. This bumper cover is commonly used for rear-end collision repairs, insurance claim repairs, cosmetic restoration projects, and everyday body repair work.

6. Can this bumper cover be painted to match my vehicle?

Yes. The primed surface is specifically designed for professional paint preparation and color matching to achieve a seamless factory-inspired appearance.

7. Will this rear bumper cover arrive folded?

Some bumper covers may be folded for shipping to reduce shipping costs. The bumper cover will typically return to its original shape after unpacking and standard installation procedures.

Compatibility Disclaimer

Nissan® and Altima® are registered trademarks of Nissan Motor Co., Ltd. Velnox Auto is not affiliated with, endorsed by, sponsored by, or otherwise connected to Nissan Motor Co., Ltd. Vehicle manufacturer names, model names, trim levels, and model years are used solely for product identification and compatibility purposes. This product is an aftermarket replacement part and is not manufactured, authorized, or approved by Nissan Motor Co., Ltd. 

Product Overview

A damaged front bumper can significantly affect the appearance of your Nissan Altima. Whether the damage was caused by road debris, a parking lot incident, or a minor collision, replacing the bumper cover is one of the most effective ways to restore your vehicle's clean exterior appearance. This 2019-2022 Nissan Altima Front Bumper Cover features an OE-style design that complements the original body lines of compatible Altima models. Finished with a smooth primed surface, it is ready for professional paint preparation and color matching. Once painted and installed, it helps restore the bold V-Motion front-end styling that gives the 2019-2022 Nissan Altima its modern and sophisticated appearance. Designed for collision repair, cosmetic restoration, and everyday vehicle maintenance, this replacement front bumper cover offers a practical and cost-effective solution for replacing a cracked, scratched, or damaged bumper.

Designed Around the Original Altima Styling

The 2019-2022 Nissan Altima introduced a more athletic exterior with Nissan's signature V-Motion grille, sculpted body lines, and a refined midsize sedan profile. This OE-style replacement bumper cover is designed to complement the original exterior styling while helping restore your vehicle after collision damage, parking incidents, or everyday wear.

Restore the Original Appearance

Replacing a damaged bumper cover helps restore the clean, finished appearance of your vehicle while completing professional collision repairs or exterior restoration projects. After proper paint preparation and installation, this bumper cover blends naturally with the original body design, helping your Altima regain its factory-inspired appearance.

When Should You Replace a Front Bumper Cover?

Consider replacing your front bumper cover if you notice:

• Cracks or broken plastic

• Broken mounting tabs

• Deep scratches or gouges

• Large dents from minor collisions

• Paint damage that cannot be repaired

• Visible impact damage affecting the bumper's appearance

Replacing a damaged bumper cover is often more practical and economical than repairing severely damaged plastic components.

Why Choose an OE-Style Replacement?

OE-style replacement bumper covers are designed to complement the original body design of compatible vehicles. The smooth primed surface provides an ideal foundation for professional paint preparation and color matching, helping achieve a seamless finish that restores your vehicle's original appearance.

Primed Surface Ready for Paint

This bumper cover arrives with a smooth primed finish to simplify the refinishing process.

Benefits include:

• Easier paint preparation

• Professional color matching

• Consistent surface quality

• Reduced preparation time before painting

• Smooth foundation for a factory-quality finish

Professional painting and color matching are recommended before installation.

Common Repair Applications

This front bumper cover is commonly used for:

• Front-end collision repair

• Cosmetic bumper replacement

• Insurance claim repairs

• Exterior body repair projects

• Vehicle restoration

• Daily driver maintenance

• Vehicle reconditioning before resale

Whether you're repairing accident damage or restoring your Altima's appearance, this replacement bumper cover helps complete a professional-quality repair.

Product Features

• OE-style front bumper cover replacement
• Precision-molded to complement original body lines
• Durable automotive-grade construction
• Smooth primed finish ready for paint
• Helps restore original exterior appearance
• Designed for collision repair and restoration
• Suitable for professional body shops and experienced DIY installations

Important Information

This listing includes one primed front bumper cover only. Grilles, emblems, fog lights, parking sensors, mounting hardware, brackets, reinforcement components, and other accessories are sold separately unless otherwise specified.

FAQS

1. Does this front bumper cover come painted?

No. This bumper cover is supplied in a smooth primed finish and requires professional painting before installation.

2. What is included with this bumper cover?

This listing includes one primed front bumper cover only. Grilles, emblems, fog lights, parking sensors, mounting hardware, brackets, reinforcement bars, trim pieces, and other accessories are sold separately unless otherwise specified.

3. Is this an OEM Nissan part?

No. This is an aftermarket replacement front bumper cover designed for compatible Nissan Altima applications. It is manufactured to provide an OE-style appearance and fit.

4. Is professional installation recommended?

Yes. Professional installation is recommended to ensure proper fitment, paint preparation, alignment, and a factory-quality finish.

5. Can this bumper cover be used for collision repair?

Yes. This bumper cover is commonly used for collision repairs, insurance claim repairs, cosmetic restoration projects, and everyday body repair work.

6. Can this bumper cover be painted to match my vehicle?

Yes. The primed surface is specifically designed for professional paint preparation and color matching to achieve a seamless factory-inspired appearance.

7. Will this front bumper cover arrive folded?

Some bumper covers may be folded for shipping to reduce shipping costs. The bumper cover will typically return to its original shape after unpacking and standard installation procedures.

Compatibility Disclaimer

Nissan® and Altima® are registered trademarks of Nissan Motor Co., Ltd. Velnox Auto is not affiliated with, endorsed by, sponsored by, or otherwise connected to Nissan Motor Co., Ltd. Vehicle manufacturer names, model names, trim levels, and model years are used solely for product identification and compatibility purposes. This product is an aftermarket replacement part and is not manufactured, authorized, or approved by Nissan Motor Co., Ltd.

Product Overview

A damaged rear bumper can significantly affect the appearance of your Nissan Altima. Whether the damage was caused by a parking lot accident, a low-speed rear-end collision, loading cargo, or everyday driving, replacing the bumper cover is one of the most effective ways to restore your vehicle's clean exterior appearance. This 2016-2018 Nissan Altima Rear Bumper Cover features an OE-style design that complements the original body lines of compatible Altima models. Finished with a smooth primed surface, it is ready for professional paint preparation and color matching. Once painted and installed, it helps restore the refined rear styling that has made the Nissan Altima one of America's most popular midsize sedans.  Designed for collision repair, cosmetic restoration, and everyday vehicle maintenance, this replacement rear bumper cover offers a practical and cost-effective solution for replacing a cracked, scratched, or damaged bumper.

Designed Around the Original Altima Styling

The Nissan Altima is recognized for its sleek profile, refined exterior styling, and comfortable midsize sedan design. This OE-style replacement rear bumper cover is designed to complement the original rear body lines, helping restore your vehicle after collision damage, parking incidents, or everyday wear while maintaining its factory-inspired appearance.

Restore the Original Appearance

Replacing a damaged rear bumper cover helps restore the clean, finished appearance of your vehicle while completing professional collision repairs or exterior restoration projects. After proper paint preparation and installation, this bumper cover blends naturally with the original body design, helping your Altima regain its factory-inspired look.

When Should You Replace a Rear Bumper Cover?

Consider replacing your rear bumper cover if you notice:

• Cracks or broken plastic

• Broken mounting tabs

• Deep scratches or gouges

• Dents caused by parking or rear-end impacts

• Paint damage that cannot be repaired

• Visible impact damage affecting the bumper's appearance

Replacing a damaged bumper cover is often more practical and economical than repairing severely damaged plastic components.

Why Choose an OE-Style Replacement?

OE-style replacement bumper covers are designed to complement the original body design of compatible vehicles. The smooth primed surface provides an ideal foundation for professional paint preparation and color matching, helping achieve a seamless finish that restores your vehicle's original appearance.

Primed Surface Ready for Paint

This bumper cover arrives with a smooth primed finish to simplify the refinishing process.

Benefits include:

• Easier paint preparation

• Professional color matching

• Consistent surface quality

• Reduced preparation time before painting

• Smooth foundation for a factory-quality finish

Professional painting and color matching are recommended before installation.

Common Repair Applications

This rear bumper cover is commonly used for:

• Rear-end collision repair

• Parking damage restoration

• Cosmetic bumper replacement

• Insurance claim repairs

• Exterior body repair projects

• Vehicle restoration

• Daily driver maintenance

• Vehicle reconditioning before resale

Whether you're repairing accident damage or restoring your Altima's appearance, this replacement rear bumper cover helps complete a professional-quality repair.

Product Features

• OE-style rear bumper cover replacement
• Precision-molded to complement original body lines
• Durable automotive-grade construction
• Smooth primed finish ready for paint
• Helps restore original exterior appearance
• Designed for collision repair and restoration
• Suitable for professional body shops and experienced DIY installations

Important Information

This listing includes one primed rear bumper cover only. Reflectors, parking sensors, mounting hardware, brackets, reinforcement components, trim pieces, and other accessories are sold separately unless otherwise specified.

FAQS

1. Does this rear bumper cover come painted?

No. This bumper cover is supplied in a smooth primed finish and requires professional painting before installation.

2. What is included with this bumper cover?

This listing includes one primed rear bumper cover only. Reflectors, parking sensors, mounting hardware, brackets, reinforcement bars, trim pieces, and other accessories are sold separately unless otherwise specified.

3. Is this an OEM Nissan part?

No. This is an aftermarket replacement rear bumper cover designed for compatible Nissan Altima applications. It is manufactured to provide an OE-style appearance and fit.

4. Is professional installation recommended?

Yes. Professional installation is recommended to ensure proper fitment, paint preparation, alignment, and a factory-quality finish.

5. Can this bumper cover be used for collision repair?

Yes. This bumper cover is commonly used for rear-end collision repairs, insurance claim repairs, cosmetic restoration projects, and everyday body repair work.

6. Can this bumper cover be painted to match my vehicle?

Yes. The primed surface is specifically designed for professional paint preparation and color matching to achieve a seamless factory-inspired appearance.

7. Will this rear bumper cover arrive folded?

Some bumper covers may be folded for shipping to reduce shipping costs. The bumper cover will typically return to its original shape after unpacking and standard installation procedures.

Compatibility Disclaimer

Nissan® and Altima® are registered trademarks of Nissan Motor Co., Ltd. Velnox Auto is not affiliated with, endorsed by, sponsored by, or otherwise connected to Nissan Motor Co., Ltd. Vehicle manufacturer names, model names, trim levels, and model years are used solely for product identification and compatibility purposes. This product is an aftermarket replacement part and is not manufactured, authorized, or approved by Nissan Motor Co., Ltd. 

Product Overview

A damaged front bumper can significantly affect the appearance of your Nissan Altima. Whether the damage was caused by road debris, a parking lot incident, or a minor collision, replacing the bumper cover is one of the most effective ways to restore your vehicle's clean exterior appearance. This 2016-2018 Nissan Altima Front Bumper Cover features an OE-style design that complements the original body lines of compatible Altima models. Finished with a smooth primed surface, it is ready for professional paint preparation and color matching. Once painted and installed, it helps restore the refined front-end styling that has made the Nissan Altima one of America's most popular midsize sedans. Designed for collision repair, cosmetic restoration, and everyday vehicle maintenance, this replacement front bumper cover offers a practical and cost-effective solution for replacing a cracked, scratched, or damaged bumper.

Designed Around the Original Altima Styling

The Nissan Altima is recognized for its sleek profile, refined front fascia, and comfortable midsize sedan design. This OE-style replacement bumper cover is designed to complement the original exterior styling, helping restore your vehicle after collision damage, parking incidents, or everyday wear while maintaining its factory-inspired appearance.

Restore the Original Appearance

Replacing a damaged bumper cover helps restore the clean, finished appearance of your vehicle while completing professional collision repairs or exterior restoration projects. After proper paint preparation and installation, this bumper cover blends naturally with the original body design, helping your Altima regain its factory-inspired look.

When Should You Replace a Front Bumper Cover?

Consider replacing your front bumper cover if you notice:

• Cracks or broken plastic

• Broken mounting tabs

• Deep scratches or gouges

• Large dents from minor collisions

• Paint damage that cannot be repaired

• Visible impact damage affecting the bumper's appearance

Replacing a damaged bumper cover is often more practical and economical than repairing severely damaged plastic components.

Why Choose an OE-Style Replacement?

OE-style replacement bumper covers are designed to complement the original body design of compatible vehicles. The smooth primed surface provides an ideal foundation for professional paint preparation and color matching, helping achieve a seamless finish that restores your vehicle's original appearance.

Primed Surface Ready for Paint

This bumper cover arrives with a smooth primed finish to simplify the refinishing process.

Benefits include:

• Easier paint preparation

• Professional color matching

• Consistent surface quality

• Reduced preparation time before painting

• Smooth foundation for a factory-quality finish

Professional painting and color matching are recommended before installation.

Common Repair Applications

This front bumper cover is commonly used for:

• Front-end collision repair

• Cosmetic bumper replacement

• Insurance claim repairs

• Exterior body repair projects

• Vehicle restoration

• Daily driver maintenance

• Vehicle reconditioning before resale

Whether you're repairing accident damage or restoring your Altima's appearance, this replacement bumper cover helps complete a professional-quality repair.

Product Features

• OE-style front bumper cover replacement
• Precision-molded to complement original body lines
• Durable automotive-grade construction
• Smooth primed finish ready for paint
• Helps restore original exterior appearance
• Designed for collision repair and restoration
• Suitable for professional body shops and experienced DIY installations

Important Information

This listing includes one primed front bumper cover only. Grilles, emblems, fog lights, parking sensors, mounting hardware, brackets, reinforcement components, and other accessories are sold separately unless otherwise specified.

FAQS

1. Does this front bumper cover come painted?

No. This bumper cover is supplied in a smooth primed finish and requires professional painting before installation.

2. What is included with this bumper cover?

This listing includes one primed front bumper cover only. Grilles, emblems, fog lights, parking sensors, mounting hardware, brackets, reinforcement bars, trim pieces, and other accessories are sold separately unless otherwise specified.

3. Is this an OEM Nissan part?

No. This is an aftermarket replacement front bumper cover designed for compatible Nissan Altima applications. It is manufactured to provide an OE-style appearance and fit.

4. Is professional installation recommended?

Yes. Professional installation is recommended to ensure proper fitment, paint preparation, alignment, and a factory-quality finish.

5. Can this bumper cover be used for collision repair?

Yes. This bumper cover is commonly used for collision repairs, insurance claim repairs, cosmetic restoration projects, and everyday body repair work.

6. Can this bumper cover be painted to match my vehicle?

Yes. The primed surface is specifically designed for professional paint preparation and color matching to achieve a seamless factory-inspired appearance.

7. Will this front bumper cover arrive folded?

Some bumper covers may be folded for shipping to reduce shipping costs. The bumper cover will typically return to its original shape after unpacking and standard installation procedures.

Compatibility Disclaimer

Nissan® and Altima® are registered trademarks of Nissan Motor Co., Ltd. Velnox Auto is not affiliated with, endorsed by, sponsored by, or otherwise connected to Nissan Motor Co., Ltd. Vehicle manufacturer names, model names, trim levels, and model years are used solely for product identification and compatibility purposes. This product is an aftermarket replacement part and is not manufactured, authorized, or approved by Nissan Motor Co., Ltd.

Product Overview

The rear bumper plays an important role in protecting your Honda Pilot while maintaining its bold, refined SUV appearance. Whether your original bumper has been damaged by a parking lot accident, a low-speed rear-end collision, loading cargo, or everyday driving, replacing the bumper cover is an effective way to restore your vehicle's exterior while preserving its factory-inspired styling. This 2019-2022 Honda Pilot Rear Bumper Cover is manufactured with an OE-style design that follows the original body lines of compatible Pilot models. Finished with a smooth primed surface, it is ready for professional paint preparation and color matching. Once refinished and installed, it restores the clean rear styling that makes the Honda Pilot one of the most trusted three-row SUVs for families and everyday adventures. Designed for collision repair, cosmetic restoration, and everyday vehicle maintenance, this replacement rear bumper cover offers a practical and cost-effective solution for replacing a cracked, scratched, or damaged rear bumper.

Built for Family Adventures

The Honda Pilot combines spacious three-row seating, confident SUV styling, and everyday versatility. Whether it's family road trips, school runs, or daily commuting, keeping your Pilot looking its best helps maintain both its appearance and long-term value. This OE-style replacement rear bumper cover is designed to restore the original rear styling after accident damage or everyday wear.

Why Replace a Damaged Rear Bumper Cover?

The rear bumper is one of the most frequently damaged exterior components on an SUV. Parking mishaps, low-speed impacts, loading cargo, and everyday driving can leave scratches, dents, cracks, or scuffs that affect your Pilot's overall appearance.

Replacing a damaged bumper cover can help:

• Restore your vehicle's original appearance

• Replace cracked or damaged bumper surfaces

• Improve overall exterior presentation

• Support rear-end collision repairs

• Complete cosmetic restoration projects

• Prepare your vehicle for resale or trade-in

Replacing a damaged bumper cover is often more practical and economical than repairing severely damaged plastic components.

Why Choose an OE-Style Replacement?

An OE-style replacement bumper cover is designed to restore the original appearance of your Honda Pilot without altering its factory body lines. The smooth primed surface provides an ideal foundation for professional paint preparation, helping achieve a seamless finish that blends naturally with the rest of your vehicle.

Primed Surface Ready for Paint

Every bumper cover is supplied with a smooth primed finish to simplify the refinishing process.

Benefits include:

• Easier paint preparation

• Professional color matching

• Consistent surface quality

• Reduced preparation time before painting

• Smooth foundation for a factory-quality finish

Professional painting and color matching are recommended before installation.

Common Repair Applications

This rear bumper cover is commonly used for:

• Rear-end collision repair

• Parking damage restoration

• Cosmetic bumper replacement

• Insurance claim repairs

• Exterior body repair projects

• Vehicle restoration

• Daily driver maintenance

• Vehicle reconditioning before resale

Whether you're repairing accident damage or restoring your Pilot's appearance, this replacement rear bumper cover helps complete a professional-quality repair.

Product Features

• OE-style rear bumper cover replacement
• Precision-molded to complement original body lines
• Durable automotive-grade construction
• Smooth primed finish ready for paint
• Ideal for collision repair and restoration
• Helps restore original rear-end styling
• Suitable for professional body shops and experienced DIY installations

Important Information

This listing includes one primed rear bumper cover only. Reflectors, parking sensors, mounting hardware, brackets, reinforcement components, trim pieces, and other accessories are sold separately unless otherwise specified.

FAQS

1. Does this rear bumper cover come painted?

No. This bumper cover is supplied in a smooth primed finish and must be professionally painted before installation.

2. What is included with this bumper cover?

This listing includes one primed rear bumper cover only. Reflectors, parking sensors, mounting hardware, brackets, reinforcement bars, trim pieces, and other accessories are sold separately unless otherwise specified.

3. Is this an OEM Honda part?

No. This is an aftermarket replacement rear bumper cover designed for compatible Honda Pilot applications. It is manufactured to provide an OE-style appearance and fit.

4. Is professional installation recommended?

Yes. Professional installation is recommended to help ensure proper alignment, paint preparation, and a factory-quality finish.

5. Is this bumper cover suitable for collision repair?

Yes. This bumper cover is commonly used for rear-end collision repairs, insurance claim repairs, cosmetic restoration, and everyday body repair projects.

6. Can this bumper cover be painted to match my vehicle?

Yes. The primed surface is specifically designed for professional paint preparation and color matching to achieve a seamless factory-inspired appearance.

7. Will this bumper cover arrive folded?

Some bumper covers may be folded for shipping to reduce shipping costs. The bumper cover will typically return to its original shape after unpacking and standard installation procedures.

Compatibility Disclaimer

Honda® and Pilot® are registered trademarks of Honda Motor Co., Ltd. Velnox Auto is not affiliated with, endorsed by, sponsored by, or otherwise connected to Honda Motor Co., Ltd. Vehicle manufacturer names, model names, trim levels, and model years are used solely for product identification and compatibility purposes. This product is an aftermarket replacement part and is not manufactured, authorized, or approved by Honda Motor Co., Ltd.

Product Overview

The front bumper is one of the most important exterior components of your Honda Pilot, helping protect the front of your vehicle while contributing to its bold, confident appearance. Whether your original bumper has been damaged by a parking lot incident, road debris, or a minor collision, replacing the bumper cover is an effective way to restore your SUV's factory-inspired styling. This 2019-2022 Honda Pilot Front Bumper Cover is manufactured with an OE-style design that follows the original body lines of compatible Pilot models. Finished with a smooth primed surface, it is ready for professional paint preparation and color matching. Once refinished and installed, it restores the clean front-end appearance that makes the Honda Pilot one of the most trusted family SUVs on the road. Designed for collision repair, cosmetic restoration, and everyday vehicle maintenance, this replacement bumper cover offers a practical and cost-effective solution for replacing a cracked, scratched, or damaged front bumper.

Built for Family Adventures

The Honda Pilot is known for its spacious three-row seating, confident SUV styling, and everyday versatility. Whether it's daily commuting, school drop-offs, road trips, or weekend adventures, keeping your Pilot looking its best helps maintain both its appearance and value. This OE-style replacement bumper cover is designed to restore the original front-end styling after collision damage or everyday wear.

Why Replace a Damaged Front Bumper Cover?

Your front bumper is constantly exposed to road hazards, parking impacts, and everyday driving conditions. Even minor damage can affect the appearance of your Honda Pilot and reduce its overall curb appeal.

Replacing a damaged bumper cover can help:

• Restore your vehicle's original appearance

• Replace cracked or damaged bumper surfaces

• Improve overall exterior presentation

• Support front-end collision repairs

• Complete cosmetic restoration projects

• Prepare your vehicle for resale or trade-in

Replacing a damaged bumper cover is often more practical and economical than repairing severely damaged plastic components.

Why Choose an OE-Style Replacement?

An OE-style replacement bumper cover is designed to restore the original appearance of your Honda Pilot without altering its factory body lines. The smooth primed surface provides an ideal foundation for professional paint preparation, helping achieve a seamless finish that blends naturally with the rest of your vehicle.

Primed Surface Ready for Paint

Every bumper cover is supplied with a smooth primed finish to simplify the refinishing process. Benefits include:

• Easier paint preparation

• Professional color matching

• Consistent surface quality

• Reduced preparation time before painting

• Smooth foundation for a factory-quality finish

Professional painting and color matching are recommended before installation.

Common Repair Applications

This front bumper cover is commonly used for:

• Front-end collision repair

• Cosmetic bumper replacement

• Insurance claim repairs

• Exterior body repair projects

• Vehicle restoration

• Daily driver maintenance

• Vehicle reconditioning before resale

Whether you're repairing accident damage or refreshing your Pilot's appearance, this replacement bumper cover helps complete a professional-quality repair.

Product Features

• OE-style front bumper cover replacement
• Precision-molded to complement original body lines
• Durable automotive-grade construction
• Smooth primed finish ready for paint
• Ideal for collision repair and restoration
• Helps restore original vehicle appearance
• Suitable for professional body shops and experienced DIY installations

Important Information

This listing includes one primed front bumper cover only. Grilles, emblems, fog lights, parking sensors, mounting hardware, brackets, reinforcement components, and other accessories are sold separately unless otherwise specified.

FAQS

1. Does this front bumper cover come painted?

No. This bumper cover is supplied in a smooth primed finish and must be professionally painted before installation.

2. What is included with this bumper cover?

This listing includes one primed front bumper cover only. Grilles, emblems, fog lights, parking sensors, mounting hardware, brackets, reinforcement bars, trim pieces, and other accessories are sold separately unless otherwise specified.

3. Is this an OEM Honda part?

No. This is an aftermarket replacement front bumper cover designed for compatible Honda Pilot applications. It is manufactured to provide an OE-style appearance and fit.

4. Is professional installation recommended?

Yes. Professional installation is recommended to help ensure proper alignment, paint preparation, and a factory-quality finish.

5. Is this bumper cover suitable for collision repair?

Yes. This bumper cover is commonly used for front-end collision repairs, insurance claim repairs, cosmetic restoration, and everyday body repair projects.

6. Can this bumper cover be painted to match my vehicle?

Yes. The primed surface is specifically designed for professional paint preparation and color matching to achieve a seamless factory-inspired appearance.

7. Will this front bumper cover arrive folded?

Some bumper covers may be folded for shipping to reduce shipping costs. The bumper cover will typically return to its original shape after unpacking and standard installation procedures.

Compatibility Disclaimer

Honda® and Pilot® are registered trademarks of Honda Motor Co., Ltd. Velnox Auto is not affiliated with, endorsed by, sponsored by, or otherwise connected to Honda Motor Co., Ltd. Vehicle manufacturer names, model names, trim levels, and model years are used solely for product identification and compatibility purposes. This product is an aftermarket replacement part and is not manufactured, authorized, or approved by Honda Motor Co., Ltd.

Product Overview

The rear bumper plays an important role in protecting your Honda HR-V while preserving its clean, modern crossover styling. If your original bumper has been damaged by a parking lot accident, a low-speed rear-end collision, loading cargo, or everyday driving, replacing the bumper cover is an effective way to restore your vehicle's exterior while maintaining its factory-inspired appearance. This 2019-2022 Honda HR-V Rear Bumper Cover features an OE-style design that follows the original body lines of compatible HR-V models. Finished with a smooth primed surface, it is ready for professional paint preparation and color matching. Once painted and installed, it helps restore the modern rear styling that makes the Honda HR-V one of today's most versatile compact crossover SUVs. Designed for collision repair, cosmetic restoration, and everyday vehicle maintenance, this replacement rear bumper cover provides a practical and cost-effective solution for replacing a cracked, scratched, or damaged rear bumper while maintaining the clean appearance of your HR-V.

Inspired by the Original HR-V Design

The Honda HR-V combines compact dimensions with SUV versatility, making it an excellent choice for urban driving and everyday adventures. This OE-style replacement rear bumper cover is designed to restore the original rear styling after accident damage or everyday wear, helping your HR-V retain its factory-inspired appearance.

Why Replace a Damaged Rear Bumper Cover?

The rear bumper is one of the most frequently damaged exterior components on a vehicle. Parking mishaps, low-speed impacts, loading cargo, and everyday driving can leave visible scratches, dents, cracks, or scuffs that affect your HR-V's overall appearance.

Replacing a damaged bumper cover can help:

• Restore your vehicle's original appearance

• Replace cracked or damaged bumper surfaces

• Improve overall exterior presentation

• Support rear-end collision repairs

• Complete cosmetic restoration projects

• Prepare your vehicle for resale or trade-in

For many vehicle owners, replacing a damaged bumper cover is often more practical and economical than repairing heavily damaged plastic components.

Primed Surface Ready for Paint

This bumper cover arrives with a smooth primed finish that simplifies the refinishing process.

Benefits include:

• Easier paint preparation

• Professional color matching

• Consistent surface quality

• Reduced preparation time before painting

• Smooth foundation for a factory-quality finish

Professional painting and color matching are recommended for the best appearance after installation.

Common Repair Applications

This rear bumper cover is commonly used for:

• Rear-end collision repair

• Parking damage restoration

• Cosmetic bumper replacement

• Insurance claim repairs

• Exterior body repair projects

• Daily driver maintenance

• Vehicle reconditioning before resale

Whether you're repairing collision damage or restoring your HR-V's appearance, this replacement rear bumper cover helps complete a professional-quality repair.

Product Features

• OE-style rear bumper cover replacement
• Precision-molded to complement factory body lines
• Durable automotive-grade construction
• Smooth primed finish ready for paint
• Ideal for collision repair and exterior restoration
• Helps restore original rear-end styling
• Suitable for professional body shop or DIY repair projects

Important Information

This listing includes one primed rear bumper cover only. Reflectors, parking sensors, mounting hardware, brackets, reinforcement components, trim pieces, and other accessories are sold separately unless otherwise specified.

FAQS

1. Does this rear bumper cover come painted?

No. This rear bumper cover is supplied in a smooth primed finish and must be professionally painted before installation to match your vehicle's color.

2. What is included with this bumper cover?

This listing includes one primed rear bumper cover only. Reflectors, parking sensors, mounting hardware, brackets, reinforcement bars, trim pieces, and other accessories are sold separately unless otherwise specified.

3. Is this an OEM Honda part?

No. This is an aftermarket replacement rear bumper cover designed for compatible Honda HR-V applications. It is manufactured to provide an OE-style appearance and fit.

4. Is professional installation recommended?

Yes. Professional installation is recommended to ensure proper alignment, paint preparation, and a factory-quality finish.

5. Is this bumper cover suitable for collision repair?

Yes. This bumper cover is commonly used for rear-end collision repairs, cosmetic restoration projects, insurance claim repairs, and everyday body repair work.

6. Can this bumper cover be painted to match my vehicle?

Yes. The primed surface is specifically designed for professional paint preparation and color matching to achieve a seamless factory-inspired appearance.

7. Will this rear bumper cover arrive folded?

Some bumper covers may be folded for shipping to reduce shipping costs. The bumper cover will typically return to its original shape after unpacking and standard installation procedures.

Compatibility Disclaimer

Honda® and HR-V® are registered trademarks of Honda Motor Co., Ltd. Velnox Auto is not affiliated with, endorsed by, sponsored by, or otherwise connected to Honda Motor Co., Ltd. Vehicle manufacturer names, model names, trim levels, and model years are used solely for product identification and compatibility purposes. This product is an aftermarket replacement part and is not manufactured, authorized, or approved by Honda Motor Co., Ltd.

Product Overview

The front bumper is one of the most noticeable exterior components of your Honda HR-V, helping protect your vehicle while enhancing its clean, modern appearance. If your original bumper has been damaged by a parking lot incident, road debris, or a minor collision, replacing the bumper cover is an effective way to restore your vehicle's exterior while maintaining its factory-inspired styling. This 2019-2022 Honda HR-V Front Bumper Cover features an OE-style design that follows the original body lines of compatible HR-V models. Finished with a smooth primed surface, it is ready for professional paint preparation and color matching. Once painted and installed, it helps restore the modern front-end styling that makes the Honda HR-V one of today's most versatile compact crossover SUVs. Designed for collision repair, cosmetic restoration, and everyday vehicle maintenance, this replacement front bumper cover provides a practical and cost-effective solution for replacing a cracked, scratched, or damaged bumper while preserving the clean appearance of your HR-V.

Inspired by the Original HR-V Design

The Honda HR-V combines compact dimensions with SUV versatility, making it an ideal choice for city driving and everyday adventures. This OE-style replacement front bumper cover is designed to restore the original front-end styling after accident damage or everyday wear, helping your HR-V maintain its factory-inspired appearance.

Why Replace a Damaged Front Bumper Cover?

The front bumper is one of the most exposed exterior components on any vehicle. Daily driving, parking, and road debris can result in scratches, dents, cracks, or other cosmetic damage that affects your HR-V's appearance.

Replacing a damaged bumper cover can help:

• Restore your vehicle's original appearance

• Replace cracked or damaged bumper surfaces

• Improve overall exterior presentation

• Support front-end collision repairs

• Complete cosmetic restoration projects

• Prepare your vehicle for resale or trade-in

For many vehicle owners, replacing a damaged bumper cover is often more practical and economical than repairing heavily damaged plastic components.

Primed Surface Ready for Paint

This bumper cover arrives with a smooth primed finish that simplifies the refinishing process.

Benefits include:

• Easier paint preparation

• Professional color matching

• Consistent surface quality

• Reduced preparation time before painting

• Smooth foundation for a factory-quality finish

Professional painting and color matching are recommended for the best appearance after installation.

Common Repair Applications

This front bumper cover is commonly used for:

• Front-end collision repair

• Accident damage restoration

• Cosmetic bumper replacement

• Insurance claim repairs

• Exterior body repair projects

• Daily driver maintenance

• Vehicle reconditioning before resale

Whether you're repairing collision damage or restoring your HR-V's appearance, this replacement bumper cover helps complete a professional-quality repair.

Product Features

• OE-style front bumper cover replacement
• Precision-molded to complement factory body lines
• Durable automotive-grade construction
• Smooth primed finish ready for paint
• Ideal for collision repair and exterior restoration
• Helps restore original front-end styling
• Suitable for professional body shop or DIY repair projects

Important Information

This listing includes one primed front bumper cover only. Grilles, emblems, fog lights, parking sensors, mounting hardware, brackets, reinforcement components, and other accessories are sold separately unless otherwise specified.

FAQS

1. Does this front bumper cover come painted?

No. This front bumper cover is supplied in a smooth primed finish and must be professionally painted before installation to match your vehicle's color.

2. What is included with this bumper cover?

This listing includes one primed front bumper cover only. Grilles, emblems, fog lights, parking sensors, mounting hardware, brackets, reinforcement bars, trim pieces, and other accessories are sold separately unless otherwise specified.

3. Is this an OEM Honda part?

No. This is an aftermarket replacement front bumper cover designed for compatible Honda HR-V applications. It is manufactured to provide an OE-style appearance and fit.

4. Is professional installation recommended?

Yes. Professional installation is recommended to ensure proper alignment, paint preparation, and a factory-quality finish.

5. Is this bumper cover suitable for collision repair?

Yes. This bumper cover is commonly used for front-end collision repairs, cosmetic restoration projects, insurance claim repairs, and everyday body repair work.

6. Can this bumper cover be painted to match my vehicle?

Yes. The primed surface is specifically designed for professional paint preparation and color matching to achieve a seamless factory-inspired appearance.

7. Will this front bumper cover arrive folded?

Some bumper covers may be folded for shipping to reduce shipping costs. The bumper cover will typically return to its original shape after unpacking and standard installation procedures.

Compatibility Disclaimer

Honda® and HR-V® are registered trademarks of Honda Motor Co., Ltd. Velnox Auto is not affiliated with, endorsed by, sponsored by, or otherwise connected to Honda Motor Co., Ltd. Vehicle manufacturer names, model names, trim levels, and model years are used solely for product identification and compatibility purposes. This product is an aftermarket replacement part and is not manufactured, authorized, or approved by Honda Motor Co., Ltd.

Product Description

Replace a damaged rear bumper panel with this primed bare-shell rear bumper cover designed for select 2019–2021 Honda Civic Sedan configurations. This listing includes the main rear bumper cover panel only. Existing trim and related components may be transferred when compatible.

Package Includes

Before Ordering - Confirm that the vehicle is a 2019–2021 Honda Civic Sedan and compare the product photos, bumper shape, lower openings, mounting points and original part number before purchase. Not designed for Civic Coupe, Hatchback or Type R models. Compatibility may also vary by trim level, exhaust configuration, parking-sensor equipment and production specifications.

Finish and Installation

The bumper cover is supplied in a primed finish and requires surface preparation and painting before installation. Test-fit the panel and all transferred components before painting or permanent installation. Professional body-shop painting and installation are recommended.

Items Not Included

This listing includes the rear bumper cover bare shell only. Lower valance panels, reflectors, exhaust trim, parking sensors, retainers, brackets, wiring, emblems and mounting hardware are not included unless specifically shown and stated.

Compatibility Disclaimer

This product is an aftermarket replacement and is not manufactured or supplied by Honda Motor Co., Ltd. OEM reference numbers, North American interchange numbers, vehicle names, trim names and body-style descriptions are provided solely for product identification and compatibility verification. Their use does not indicate that this product is a genuine Honda OEM part. Honda®, Civic® and related trademarks are the property of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, endorsed by or authorized by Honda Motor Co., Ltd.

Product Overview

Restore the front-end appearance of your vehicle with this Front Bumper Cover Bare Shell, designed as an OE-style aftermarket replacement for compatible North American 2019–2021 Honda Civic Sedan and Coupe facelift models. Made from lightweight, flexible automotive-grade plastic, this replacement bumper skin follows the original front body lines and uses compatible factory-style mounting locations. The bumper cover is supplied in a primed matte-black finish and requires surface preparation, color matching, and painting before installation.

Package Includes

• 1x Front Bumper Cover Bare Shell Panel

• OEM Reference Number: 04711-TBA-A60ZZ

• North American Interchange Number: HO1000314

This listing includes the Front Bumper Cover Bare Shell ONLY.

The following components are not included:

• Upper grille or chrome grille garnish

• Center lower honeycomb grille inserts

• Fog-light bezels or side bumper trim

• Fog lights, bulbs, wiring, or connectors

• Lower chin spoiler or splitter

• Front emblem or license-plate bracket

• Parking sensors or sensor brackets

• Impact absorber or steel reinforcement beam

• Side mounting brackets

• Clips, retainers, fasteners, or installation hardware

Compatible original components may need to be transferred from the existing bumper assembly or purchased separately.

Important Fitment Notice

100% fitment guaranteed only for compatible North American 2019–2021 Honda Civic Sedan and Coupe facelift models using the matching bumper design and reference numbers.

Compatible with applicable:

• Sedan — 4-Door

• Coupe — 2-Door

• LX, EX, EX-L, Sport, and Touring configurations

Does not fit Hatchback models, Type R models, or 2016–2018 pre-facelift models.

Verify the vehicle year, body style, original bumper design, trim configuration, OEM reference number, and North American interchange number before ordering. Refer to the external vehicle fitment chart for complete compatibility information.

Finish & Installation

The bumper cover is supplied in a primed matte-black finish and is intended for professional refinishing before installation. Surface cleaning, sanding, additional primer preparation when required, color matching, and final painting are necessary. Primer shade and surface appearance may vary slightly between production batches. Designed as a direct replacement panel using compatible factory-style mounting locations. Original grilles, trim pieces, brackets, lamps, and related components may need to be transferred from the existing bumper assembly. Test-fit the bumper cover and all transferred components before painting, drilling, cutting, or making permanent modifications. Minor body-shop adjustment may be required for proper alignment and consistent panel gaps. Professional paint preparation and installation are recommended. Painted, installed, drilled, cut, damaged, or permanently modified products may not qualify for return under the VELNOX Auto Return Policy.

Critical Unboxing & Folded Shipping Notice

This flexible bumper cover is professionally folded-packed and securely protected inside a reinforced double-wall shipping carton. This shipping method helps reduce oversized-carrier charges while allowing the panel to be delivered through standard ground service. Temporary bends, waves, or packaging impressions may be visible immediately after unpacking. These conditions are normally caused by folded packaging and do not necessarily indicate permanent damage.

After unpacking:

1. Remove all protective wrapping.

2. Place the bumper cover in a warm, clean area.

3. Allow sufficient time for the panel to recover its original shape.

4. Apply low, controlled heat gradually and evenly only when necessary.

5. Test-fit the bumper cover before painting or installation.

Avoid concentrated direct heat or overheating, as improper heat application may damage the primer or permanently deform the panel.

FAQS

1. Is the bumper cover already painted?

No. It is supplied in a primed matte-black finish and requires surface preparation, color matching, and painting before installation.

2. Does this bumper cover fit Hatchback or Type R models?

No. It is designed for compatible 2019–2021 Honda Civic Sedan and Coupe facelift models only.

3. Why is the bumper cover folded for shipping?

The flexible panel is folded and securely protected to reduce oversized shipping costs. Temporary packaging impressions normally relax after the bumper cover is unpacked and placed in a warm environment.

Compatibility Disclaimer

This product is an aftermarket replacement component and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model years, trim names, and body-style descriptions are provided solely for product identification and compatibility verification. Honda® and Civic® are registered trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Product Overview

Restore your vehicle’s rear-end appearance with this Rear Bumper Cover Bare Shell, designed as an OE-style aftermarket replacement for compatible North American 2016–2018 Honda Civic Sedan pre-facelift models.Made from lightweight, flexible automotive plastic, this replacement bumper skin follows the original rear body lines and uses compatible factory-style mounting locations. The bumper cover is supplied in a primed matte black finish and requires surface preparation, color matching, and painting before installation.

Package Includes

• 1x Rear Bumper Cover Bare Shell Main Panel

• OEM Reference Number: 04715-TBA-A00ZZ

• North American Interchange Number: HO1100311

This listing includes the Rear Bumper Cover Bare Shell ONLY.

The following parts are not included:

• Rear lower valance or diffuser

• Exhaust outlet trim or bezels

• Rear reflectors or lamps

• License-plate bracket or garnish

• Parking sensors or sensor brackets

• Impact absorber or reinforcement bar

• Side mounting brackets

• Clips, retainers, fasteners, or installation hardware

Compatible original components may need to be transferred from the existing bumper assembly or purchased separately.

Important Fitment Notice

Designed for compatible North American 2016-2018 Honda Civic Sedan pre-facelift models using the matching rear bumper configuration and reference numbers. Sedan models only. Does not fit Coupe or Hatchback models. Does NOT fit 2019-2021 facelift models due to differences in bumper styling, component openings, and mounting configuration. Verify the original bumper design, body style, trim configuration, OEM reference number, and North American interchange number before ordering. Refer to the external vehicle fitment chart for complete compatibility information.

Installation Information

Designed as a direct replacement panel using compatible factory-style mounting locations. Test-fit the bumper cover before painting, drilling, cutting, or making permanent modifications. Minor body-shop adjustment may be required for proper alignment and consistent panel gaps. Professional surface preparation, paint matching, and installation are recommended. Painted, installed, drilled, cut, damaged, or permanently modified items may not qualify for return under the VELNOX Auto Return Policy.

Folded Packaging Notice

To help reduce oversized shipping charges, this flexible bumper cover may be folded and securely wrapped for transportation. Temporary bends, waves, or packaging impressions may be present after unpacking. Place the bumper cover in a warm, clean area and allow it to recover its original shape before test-fitting and painting. Controlled warmth may be used when necessary. Do not apply excessive direct heat, as overheating may permanently damage or deform the plastic.

FAQS

1. Is the rear bumper cover painted?

No. It is supplied in a primed matte black finish and requires surface preparation, color matching, and painting before installation.

2. Does it fit Civic Coupe, Hatchback, or 2019–2021 models?

No. This rear bumper cover is designed for compatible 2016–2018 Honda Civic Sedan pre-facelift models only.

3. Why is the bumper cover folded for shipping?

The flexible bumper cover may be folded and securely wrapped to reduce oversized shipping charges. Allow it to recover its shape and test-fit it before painting or installation.

Compatibility Disclaimer

This product is an aftermarket replacement component and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, trim names, and body-style descriptions are provided solely for product identification and compatibility verification. Honda® and Civic® are registered trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Product Overview

Restore your vehicle’s front-end appearance with this Front Bumper Cover Bare Shell, designed as an OE-style aftermarket replacement for compatible North American 2016–2018 Honda Civic pre-facelift models. Made from lightweight, flexible automotive plastic, this replacement bumper skin follows the original front-end body lines and uses compatible factory-style mounting locations. The bumper cover is supplied in a primed gray or black finish and requires surface preparation, color matching, and painting before installation.

Package Includes

• 1x Front Bumper Cover Bare Shell Panel

• OEM Reference Number: 04711-TGG-A00ZZ

• North American Interchange Number: HO1000302

This listing includes the Front Bumper Cover Bare Shell ONLY.

The following parts are not included:

• Front upper chrome grille accent

• Lower honeycomb mesh grilles

• Side marker or turn-signal lamp housings

• Fog-light bezels and side bumper trim

• Fog lights, wiring, bulbs, or connectors

• Emblem or license-plate bracket

• Parking sensors or sensor brackets

• Impact absorber or reinforcement bar

• Mounting brackets, clips, retainers, or hardware

Compatible original components may need to be transferred from the existing bumper assembly or purchased separately.

Important Fitment Notice

Designed for compatible North American 2016–2018 Honda Civic pre-facelift models, including applicable LX, EX, EX-L, EX-T, and Touring Sedan, Coupe, and Hatchback configurations. Does NOT fit 2019–2021 facelift models due to differences in the lower grille mounting points, fog-light openings, and bumper attachment layout. Verify the original bumper design, body style, OEM reference number, and North American interchange number before ordering. Refer to the external vehicle fitment chart for complete compatibility information.

Installation Information

Designed as a direct replacement panel using compatible factory-style mounting locations. Test-fit the bumper cover before painting, drilling, cutting, or making permanent modifications. Minor body-shop adjustment may be required for proper alignment and consistent panel gaps. Professional surface preparation, paint matching, and installation are recommended. Painted, installed, drilled, cut, damaged, or permanently modified items may not qualify for return under the VELNOX Auto Return Policy.

Folded Packaging Notice

To help reduce oversized shipping charges, this flexible bumper cover may be folded and securely wrapped for transportation. Temporary bends or packaging impressions may be present after unpacking. Place the bumper cover in a warm, clean area and allow it to recover its original shape before test-fitting and painting. Controlled warmth may be used when necessary. Do not apply excessive direct heat, as overheating may permanently damage or deform the plastic.

FAQS

1. Is the bumper cover painted?

No. It is supplied in a primed gray or black finish and requires preparation and painting before installation.

2. Does it fit 2019–2021 Honda Civic models?

No. This bumper cover is designed for compatible 2016–2018 pre-facelift models only and does not fit the revised 2019–2021 facelift design.

3. Why is the bumper cover folded for shipping?

The flexible bumper cover may be folded and securely wrapped to reduce oversized shipping charges. Allow it to recover its shape and test-fit it before painting or installation.

Compatibility Disclaimer

This product is an aftermarket replacement component and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, trim names, and body-style descriptions are provided solely for product identification and compatibility verification. Honda® and Civic® are registered trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Product Overview

This Rear Bumper Cover Bare Shell is an OE-style aftermarket replacement designed for the updated rear bumper layout used on compatible 2021–2022 Honda Accord facelift models. It replaces the main exterior rear bumper panel while retaining the original factory-style body lines, lower trim openings, reflector locations, and mounting layout. The bumper cover is supplied in a primed finish, and the primer color may vary between gray and black. Surface preparation, color matching, and painting are required before installation.

For compatibility reference:

• OEM Reference Number: 04715-TVA-A10ZZ

• North American Interchange Number: HO1100318

Important Information

This listing includes the Rear Bumper Cover Bare Shell ONLY. The lower bumper valance or diffuser, chrome exhaust-outlet trim, tailgate license-plate garnish, rear reflector lamps, parking sensors, brackets, clips, retainers, mounting hardware, and any components not specifically listed are not included. Compatible original parts may need to be transferred from the existing bumper assembly or purchased separately.

Fitment & Installation

Designed for compatible North American 2021–2022 Honda Accord facelift models when the original rear bumper configuration, OEM reference number, and North American interchange number match this listing. This bumper cover does not fit 2018–2020 pre-facelift models because the earlier design uses a different lower trim layout, reflector configuration, exhaust-outlet arrangement, and mounting structure. Before ordering, compare the original bumper shape, lower trim openings, reflector locations, sensor provisions, mounting points, and listed reference numbers. Test-fit the bumper cover before painting or making permanent modifications. Normal body-shop adjustment may be required to achieve proper alignment and consistent panel gaps. Professional surface preparation, paint matching, and installation are recommended. Products that have been painted, installed, drilled, cut, damaged, or permanently modified may not qualify for return under the VELNOX Auto Return Policy.

FAQS

1. Is the rear bumper cover already painted?

No. It is supplied in a primed finish and must be prepared and painted to match the vehicle before installation.

2. Will this fit a 2018–2020 Honda Accord?

No. This bumper cover is designed only for the 2021–2022 facelift rear bumper configuration.

3. How should compatibility be confirmed?

Compare the original bumper design, mounting layout, and lower trim configuration with OEM 04715-TVA-A10ZZ and North American Interchange HO1100318 before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement component and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement component before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Product Overview

This Front Bumper Cover Bare Shell is an OE-style aftermarket replacement designed specifically for compatible North American 2021–2022 Honda Accord facelift models. It matches the updated mid-cycle front bumper layout and replaces the main exterior bumper panel without requiring the purchase of a complete bumper assembly. The cover is supplied in a primed finish, with primer color varying between gray and black. Surface preparation and painting are required before installation.

For compatibility reference:

• OEM Reference Number: 04711-TVA-A10ZZ

• North American Interchange Number: HO1000319

Important Information

This listing includes the Front Bumper Cover Bare Shell ONLY. The main chrome grille, lower honeycomb mesh inserts, left and right fog-light bezels, radar sensor covers, emblem, sensors, wiring, brackets, clips, retainers, and mounting hardware are not included. Compatible original components may need to be transferred from the existing bumper assembly or purchased separately.

Fitment & Installation

100% fitment guaranteed for compatible North American 2021–2022 facelift models when the original bumper configuration and listed reference numbers match the vehicle. Compatible configurations may include LX, Sport, Sport Special Edition, EX-L, Touring, and Hybrid models using the matching facelift bumper design. This bumper cover does not fit 2018–2020 pre-facelift models because the earlier design uses different grille, fog-light trim, clip, and mounting configurations. Test-fit the bumper cover before painting, drilling, cutting, or permanent installation. Minor adjustment may be required to achieve proper panel alignment.

Professional preparation, paint matching, and installation are recommended. Painted, installed, damaged, or modified products may not qualify for return under the VELNOX Auto Return Policy.

Protective Packaging

The bumper cover is packed with reinforced protective materials to help reduce movement, compression, and handling damage during transit. Inspect the item and packaging promptly after delivery and document any visible shipping damage before installation or disposal of the packaging.

FAQS

1. Is the bumper cover already painted?

No. It is supplied in a primed gray or black finish and must be prepared and painted to match the vehicle.

2. Will this fit a 2018–2020 Honda Accord?

No. It is designed only for the 2021–2022 facelift bumper configuration.

3. How should compatibility be confirmed?

Compare the original bumper design and mounting layout with OEM 04711-TVA-A10ZZ and Interchange HO1000319 before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement component and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, and trim names are provided solely for product identification and compatibility-reference purposes. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim names are used only to identify compatible vehicle configurations. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

For compatibility verification, compare the original part with:

• OEM Reference Numbers: 71501-TVA-A00 / 04715-TVA-A00ZZ

• North American Interchange Number: HO1100311

• Hollander Interchange Number : 187-10537C

Important Information

This listing is for the Rear Bumper Cover Bare Shell ONLY. The lower bumper valance or diffuser, chrome exhaust-outlet trim, rear bumper reflector lamps, parking sensors, brackets, mounting hardware, clips, retainers, and any components not specifically listed are not included. Compatible original components may need to be transferred from the existing bumper assembly or purchased separately.

Fitment & Installation

Fitment is guaranteed when the vehicle year, original rear bumper configuration, OEM reference numbers, and North American interchange number match this listing. Designed for compatible North American 2018–2020 Honda Accord LX, EX, EX-L, Sport, Touring, and Hybrid configurations. Trim names alone should not be used to confirm compatibility, as lower valance design, exhaust-opening layout, reflector openings, and sensor provisions may vary.

Before ordering, verify:

• Vehicle year and trim

• Original rear bumper shape and configuration

• Lower valance or diffuser design

• Exhaust-opening layout

• Reflector openings

• Parking-sensor provisions

• OEM and interchange reference numbers

This bumper cover is designed as a direct replacement for the matching factory-style application. Normal test-fitting and minor alignment adjustments may be required during installation. Always test-fit the bumper cover and confirm all mounting points, body lines, panel gaps, reflector openings, and lower-component alignment before painting or making permanent modifications.

Professional surface preparation, paint matching, and installation are recommended for the best finish and alignment. Products that have been painted, installed, drilled, cut, damaged, or permanently modified may not qualify for return under the VELNOX Auto Return Policy.

Protective Packaging

The bumper cover is packed with reinforced protective materials to help reduce movement, compression, and handling damage during transit. Inspect the bumper cover and packaging promptly after delivery. Document any visible shipping damage before installation or disposal of the original packaging.

FAQS

1. Is the rear bumper cover already painted?

No. It is supplied in a primed finish, and the primer color may be gray or black. The bumper cover must be prepared and painted to match the vehicle before installation.

2. What parts are not included?

The lower bumper valance or diffuser, chrome exhaust-outlet trim, rear reflector lamps, sensors, brackets, mounting hardware, clips, retainers, and any parts not specifically listed are not included.

3. Are the rear bumper reflector lamps included?

No. The driver- and passenger-side rear reflector lamps are not included. Compatible original reflectors may be transferred if they are undamaged and match the replacement bumper configuration.

4. Will this fit all listed Honda Accord trims?

It is designed for compatible LX, EX, EX-L, Sport, Touring, and Hybrid configurations, but fitment must be confirmed using the original bumper design, vehicle equipment, OEM references, and interchange number.

5. Should the bumper cover be test-fitted before painting?

Yes. Test-fit the bumper cover and verify all mounting points, panel gaps, reflector openings, sensor provisions, and lower trim alignment before painting or making permanent modifications.

Compatibility Disclaimer

This product is an aftermarket replacement component and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement component before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim names are used solely to identify compatible vehicle configurations. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.