Accessories

Product Overview

This Rear Bumper Left Driver Side Support Retainer Bracket is designed as a vehicle-specific replacement for the specified 2012-2017 Toyota Camry LE and XLE Sedan configuration. It mounts at the rear left bumper-to-fender edge area and uses the flush-spec rear fender-edge side retainer guide design, helping restore proper bumper side support and alignment when the original bracket is cracked, broken, damaged, or missing.

This listing is for ONE Rear Left / Driver Side (LH) bracket only.

Critical Fitment & Hardware Configuration Notice

This bracket is specifically configured for the Rear Left / Driver Side (LH) and uses the rear fender-edge side retainer guide flush-spec layout. Rear bumper brackets may differ by trim level, mounting layout, and installation side。 Before purchase, compare the replacement bracket with the original part and confirm:

• Rear Left / Driver Side mounting position

• Overall bracket shape

• Mounting-hole locations

• Retaining tabs and guide points

• Part number references

Please verify the installation side, bracket shape, and part number before ordering.

Part Number References

Package Includes

1x Rear Bumper Left Driver Side Support Retainer Mounting Bracket

Rear Left / Driver Side / LH — 1 Piece

Key Features

• Rear Left / Driver Side specific replacement

• Flush-spec rear fender-edge side retainer guide design

• Helps restore secure bumper side mounting

• Supports proper bumper-to-body alignment

• Vehicle-specific replacement design

• Suitable for replacing a damaged, cracked, broken, or missing original bracket

Installation & Fitment Notice

Professional installation is recommended. Before installation, compare the replacement bracket with the original component to confirm the mounting pattern, bracket profile, retaining-tab locations, installation side, and part number references. Do not force installation if the bracket configuration does not match the original component.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd. 

Product Overview

This Front Bumper Right Passenger Side Support Retainer Bracket is designed as a vehicle-specific replacement for the specified 2012-2014 Toyota Camry LE and XLE Sedan configuration. Installed at the front right bumper-to-fender mounting area, this bracket helps support the bumper cover edge, maintain proper positioning, and restore a secure mounting point when the original retainer is cracked, broken, damaged, or missing.

This listing is for ONE Right / Passenger Side (RH) bracket only.

Critical Fitment & Hardware Configuration Notice

This bracket is specifically configured for the Right / Passenger Side (RH) and uses the short-spec fender edge support guide retainer design. Bumper support retainers may vary by trim level, mounting-point layout, production configuration, and installation side. Before purchase, compare the replacement bracket with the original part and confirm:

• Right / Passenger Side mounting position

• Overall bracket shape

• Mounting-hole locations

• Retaining tabs and guide points

• Part number references

Part Number References

Package Includes

1x Front Bumper Right Passenger Side Support Retainer Mounting Bracket

Right / Passenger Side / RH — 1 Piece

Key Features

• Designed for the front right / passenger-side bumper mounting position

• Helps restore proper bumper edge support and positioning

• Short-spec fender edge support guide retainer configuration

• Vehicle-specific replacement design

• Suitable for replacing a cracked, broken, damaged, or missing original retainer

• Designed to match the specified mounting configuration

Installation & Fitment Notice

Professional installation is recommended. Before installation, compare the replacement bracket directly with the original component to confirm the mounting pattern, bracket profile, retaining-tab locations, installation side, and part number references. Do not force installation if the bracket configuration does not match the original component.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd. 

Product Overview

This Front Bumper Left Driver Side Support Retainer Bracket is designed as a vehicle-specific replacement for the specified 2012-2014 Toyota Camry LE and XLE Sedan configuration. Installed at the front left bumper-to-fender mounting area, this bracket helps support the bumper cover edge, maintain proper positioning, and restore a secure mounting point when the original retainer is cracked, broken, damaged, or missing.

This listing is for ONE Left / Driver Side (LH) bracket only.

Critical Fitment & Hardware Configuration Notice

PLEASE VERIFY THE ORIGINAL BRACKET BEFORE ORDERING.

This bracket is specifically configured for the Left / Driver Side (LH) and uses the short-spec fender edge support guide retainer design. Bumper support retainers may vary by trim level, mounting-point layout, production configuration, and installation side. Before purchase, compare the replacement bracket with the original part and confirm:

• Left / Driver Side mounting position

• Overall bracket shape

• Mounting-hole locations

• Retaining tabs and guide points

• Part number references

Part Number References

Package Includes

1x Front Bumper Left Driver Side Support Retainer Mounting Bracket

Left / Driver Side / LH — 1 Piece

Key Features：

• Designed for the front left / driver-side bumper mounting position

• Helps restore proper bumper edge support and positioning

• Short-spec fender edge support guide retainer configuration

• Vehicle-specific replacement design

• Suitable for replacing a cracked, broken, damaged, or missing original retainer

• Designed to match the specified mounting configuration

Installation & Fitment Notice

Professional installation is recommended. Before installation, compare the replacement bracket directly with the original component to confirm the mounting pattern, bracket profile, retaining-tab locations, installation side, and part number references. Do not force installation if the bracket configuration does not match the original component.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd. 

Product Description

This Rear Bumper Cover Replacement is designed for 2020-2023 Nissan Sentra SR and SR Premium Trims Only with the 8th Gen B18 platform and pre-molded lower spoiler valance shark-fin diffuser slot configuration. The bumper cover serves as the exterior rear fascia shell and is suitable for replacing a cracked, scraped, deformed, or collision-damaged original rear bumper cover. Its molded profile is designed to correspond with the wider sport-oriented SR rear fascia, lower valance area, and surrounding mounting locations. This listing includes the standalone rear bumper cover shell only – NI1100336 / OEM: 85022-6LB5H, manufactured from polypropylene (PP) and supplied in primed black for proper paint preparation and refinishing.

Interchange Part Numbers

Please compare your vehicle trim, rear bumper configuration, lower diffuser layout, and reference numbers with the information below before ordering.

Key Features

• Standalone 1-piece rear bumper cover replacement shell

• Designed for 2020-2023 Nissan Sentra SR and SR Premium trims

• 8th Gen B18 platform sport rear fascia configuration

• Pre-molded lower spoiler valance shark-fin diffuser slots

• Polypropylene (PP) construction

• Primed black surface ready for proper paint preparation and refinishing

• Molded profile for the corresponding SR rear-body and lower valance layout

• Suitable for collision repair, exterior restoration, and damaged bumper replacement

Technical Fitment Notes

This rear bumper cover is intended specifically for the 2020-2023 Nissan Sentra 8th Gen B18 platform SR and SR Premium configuration. The lower portion of the fascia incorporates the corresponding pre-molded shark-fin diffuser and lower spoiler valance slots used with the SR-style rear bumper layout. These molded openings are an important configuration detail when comparing this replacement shell with the existing rear bumper cover. Important: This bumper cover is intended for the SR / SR Premium configuration only. It should not be treated as interchangeable with the standard S or SV rear bumper configuration, which uses a different smooth lower fascia layout without the corresponding sport diffuser slots. This 8th Gen B18 rear fascia configuration should also not be treated as interchangeable with earlier-generation 2013-2019 Sentra rear bumper designs. When matched to the correct vehicle, trim, and bumper configuration, this cover is designed as a direct replacement-style exterior body component for the corresponding mounting locations.

Package Includes

• 1 × Rear Bumper Cover Face Shell

Total: 1 Piece – Standalone Rear Bumper Cover Shell Only

Important Component Notice

This listing includes only the rear bumper cover shell specifically stated in the Package Includes section. Lower valance components, shark-fin diffuser pieces, spoilers, reflectors, trim pieces, sensors, sensor hardware, brackets, retainers, absorber components, reinforcement bars, exhaust trim components, fasteners, clips, and other surrounding parts are not included unless specifically stated otherwise. The bumper cover includes the described pre-molded lower diffuser and spoiler slots only. The separate lower spoiler, valance, diffuser components, and related hardware are not included unless specifically listed. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the Product Description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original rear bumper cover, vehicle trim, rear fascia configuration, lower diffuser slot layout, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the 2020-2023 Nissan Sentra SR and SR Premium 8th Gen B18 configuration with pre-molded lower spoiler valance shark-fin diffuser slots. It is not intended for the standard S or SV smooth lower rear fascia configuration. Please confirm your trim, existing bumper layout, and listed interchange numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. or Nissan North America, Inc. Nissan® and Sentra® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, lower valance or diffuser configuration, mounting points, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Description

This Rear Bumper Cover Replacement is designed for 2020-2023 Nissan Sentra Standard Base S and SV Trims Only with the 8th Gen B18 platform and Non-SR smooth flush rear fascia configuration. The bumper cover serves as the exterior rear fascia shell and is suitable for replacing a cracked, scraped, dented, deformed, or collision-damaged original rear bumper cover. Its molded profile is designed to correspond with the specified B18 rear-body contours and surrounding mounting areas. This listing includes the standalone rear bumper cover shell only – NI1100335 / OEM: 85022-6LB0H, with a textured flat black specification.

Interchange Part Numbers

Please compare your vehicle trim, rear bumper configuration, and reference numbers with the information below before ordering.

Key Features

• Standalone 1-piece rear bumper cover replacement shell

• Designed for 2020-2023 Nissan Sentra Base S and SV trims

• 8th Gen B18 platform rear fascia configuration

• Non-SR smooth flush bumper design

• Textured flat black specification

• Molded profile for the corresponding rear-body and mounting layout

• Suitable for collision repair, exterior restoration, and damaged bumper replacement

Technical Fitment Notes

This rear bumper cover is intended specifically for the 2020-2023 Nissan Sentra 8th Gen B18 platform Standard Base S and SV configuration. The molded fascia profile is designed around the corresponding Non-SR rear-end layout, including the outer corner contours, lower fascia structure, and mounting locations. Important: This bumper cover is intended for the Non-SR configuration. It should not be treated as interchangeable with SR, SR Premium, or other rear fascia configurations that use different styling, openings, trim features, or mounting layouts. When matched to the correct vehicle, trim, and bumper configuration, this cover is designed as a direct replacement-style exterior body component for the corresponding mounting locations.

Package Includes

• 1 × Rear Bumper Cover Face Shell

Total: 1 Piece – Standalone Rear Bumper Cover Shell Only

Important Component Notice

This listing includes only the rear bumper cover shell specifically stated in the Package Includes section. Reflectors, trim pieces, sensors, sensor hardware, brackets, retainers, absorber components, reinforcement bars, exhaust trim components, fasteners, clips, and other surrounding parts are not included unless specifically stated otherwise. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the Product Description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original rear bumper cover, vehicle trim, rear fascia configuration, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the 2020-2023 Nissan Sentra Standard Base S and SV 8th Gen B18 Non-SR smooth flush configuration. Please confirm your vehicle trim, existing bumper layout, and listed interchange numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. or Nissan North America, Inc. Nissan® and Sentra® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, mounting points, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Description

This Front Bumper Cover Replacement is designed for 2020-2023 Nissan Sentra SR and SR Premium Trims Only with the 8th Gen B18 platform and pre-molded outer lower bumper wing lip spoiler cutout slots. The bumper cover serves as the exterior front fascia shell and is suitable for replacing a cracked, scraped, dented, deformed, or collision-damaged original front bumper cover. Its molded profile is designed to correspond with the specified SR front-end styling and lower spoiler cutout configuration. This listing includes the standalone front bumper cover shell only – NI1000340 / OEM: 62022-6LB5H, finished in primed black.

Interchange Part Numbers

Please compare your vehicle trim, front bumper configuration, lower spoiler layout, and reference numbers with the information below before ordering.

Key Features

• Standalone 1-piece front bumper cover replacement shell

• Designed for 2020-2023 Nissan Sentra SR and SR Premium trims

• 8th Gen B18 platform front fascia configuration

• Pre-molded outer lower bumper wing lip spoiler cutout slots

• Primed black surface ready for proper paint preparation and refinishing

• Molded profile for the corresponding SR front fascia and lower spoiler layout

• Suitable for collision repair, exterior restoration, and damaged bumper replacement

Technical Fitment Notes

This front bumper cover is intended specifically for the 2020-2023 Nissan Sentra 8th Gen B18 platform SR and SR Premium configuration. The molded fascia profile includes the corresponding outer lower bumper wing lip spoiler cutout slots as part of the front bumper design. These openings are an important configuration detail when comparing this replacement with the existing bumper cover. Important: This bumper cover is intended for the SR / SR Premium configuration and should not be treated as interchangeable with Base S, SV, or other front fascia configurations that use a smooth lower bumper layout without the corresponding spoiler cutout slots. When matched to the correct vehicle, trim, and bumper configuration, this cover is designed as a direct replacement-style exterior body component for the corresponding mounting locations.

Package Includes

• 1 × Front Bumper Cover Face Shell

Total: 1 Piece – Standalone Front Bumper Cover Shell Only

Important Component Notice

This listing includes only the front bumper cover shell specifically stated in the Package Includes section. Lower wing lip spoilers, trim pieces, grille components, emblems, sensors, brackets, retainers, absorber components, reinforcement bars, fog light components, fasteners, clips, and other surrounding parts are not included unless specifically stated otherwise. The bumper cover includes the described pre-molded spoiler cutout slots only. The spoiler or lip components themselves are not included unless specifically listed. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the Product Description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original front bumper cover, vehicle trim, front fascia configuration, lower spoiler cutout layout, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the 2020-2023 Nissan Sentra SR and SR Premium 8th Gen B18 configuration with pre-molded outer lower bumper wing lip spoiler cutout slots. Please confirm these features and the listed interchange numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. or Nissan North America, Inc. Nissan® and Sentra® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, mounting points, spoiler configuration, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Description

This Front Bumper Cover Replacement is designed for 2020-2023 Nissan Sentra Standard Base S and SV Trims Only with the 8th Gen B18 platform and Non-SR smooth flush flat black front fascia configuration. The bumper cover serves as the exterior front fascia shell and is suitable for replacing a cracked, scraped, dented, deformed, or collision-damaged original front bumper cover. Its molded profile is designed to correspond with the specified B18 front-end contours, grille opening, and surrounding mounting areas. This listing includes the standalone front bumper cover shell only – NI1000339 / OEM: 62022-6LB0H, with the specified flat black nose configuration.

Interchange Part Numbers

Please compare your vehicle trim, front bumper configuration, and reference numbers with the information below before ordering.

Key Features

• Standalone 1-piece front bumper cover replacement shell

• Designed for 2020-2023 Nissan Sentra Base S and SV trims

• 8th Gen B18 platform front fascia configuration

• Non-SR smooth flush bumper design

• Flat black nose specification

• Molded profile for the corresponding grille opening and front-body layout

• Suitable for collision repair, exterior restoration, and damaged bumper replacement

Technical Fitment Notes

This front bumper cover is intended specifically for the 2020-2023 Nissan Sentra 8th Gen B18 platform Standard Base S and SV configuration. The molded fascia profile is designed around the corresponding smooth flush front-end layout, including the grille opening, front corner contours, lower fascia structure, and mounting locations. Important: This bumper cover is intended for the Non-SR configuration. It should not be treated as interchangeable with SR or other front fascia configurations that use different styling, openings, mounting profiles, or surrounding components. When matched to the correct vehicle, trim, and bumper configuration, this cover is designed as a direct replacement-style exterior body component for the corresponding mounting locations.

Package Includes

• 1 × Front Bumper Cover Face Shell

Total: 1 Piece – Standalone Front Bumper Cover Shell Only

Important Component Notice

This listing includes only the front bumper cover shell specifically stated in the Package Includes section. Grilles, grille inserts, trim pieces, emblems, sensors, sensor hardware, brackets, retainers, absorber components, reinforcement bars, fog light components, fasteners, clips, and other surrounding parts are not included unless specifically stated otherwise. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the Product Description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original front bumper cover, vehicle trim, front fascia configuration, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the 2020-2023 Nissan Sentra Standard Base S and SV 8th Gen B18 Non-SR smooth flush configuration. Please confirm your vehicle trim, existing bumper layout, and listed interchange numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. or Nissan North America, Inc. Nissan® and Sentra® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, mounting points, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Description

This Rear Bumper Cover Replacement is designed for 2016-2019 Nissan Sentra SL, Nismo, Premium, and SR Trims Only with the 7th Gen post-facelift rear-end configuration and pre-molded 4 backup radar sensor holes. The bumper cover serves as the exterior rear fascia shell and is suitable for replacing a cracked, scraped, dented, deformed, or collision-damaged original rear bumper cover. Its molded profile is designed to correspond with the specified post-facelift rear-body contours while retaining the required sensor-hole configuration. This listing includes the standalone rear bumper cover shell only – NI1100312 / OEM: 62022-4FU1H, finished in primed black.

Interchange Part Numbers

Please compare your vehicle trim, rear bumper configuration, sensor layout, and reference numbers with the information below before ordering.

Key Features

• Standalone 1-piece rear bumper cover replacement shell

• Designed for 2016-2019 Nissan Sentra SL, Nismo, Premium, and SR trims

• 7th Gen post-facelift rear fascia configuration

• Pre-molded with 4 backup radar sensor holes

• Primed black surface ready for proper paint preparation and refinishing

• Molded profile for the corresponding rear-body and mounting layout

• Suitable for collision repair, exterior restoration, and damaged bumper replacement

Technical Fitment Notes

This rear bumper cover is intended specifically for the 2016-2019 Nissan Sentra 7th Gen post-facelift SL, Nismo, Premium, and SR configuration. The molded fascia profile incorporates 4 pre-molded backup radar sensor holes as part of the bumper shell design. These openings are an important configuration detail when comparing this replacement with the existing rear bumper cover. Important: This bumper cover is intended for vehicles equipped with the corresponding 4 backup radar sensor hole configuration. It should not be treated as interchangeable with a smooth non-sensor bumper cover or another rear fascia configuration that uses a different sensor-hole or mounting layout. When matched to the correct vehicle, trim, and bumper configuration, this cover is designed as a direct replacement-style exterior body component for the corresponding mounting locations.

Package Includes

• 1 × Rear Bumper Cover Face Shell

Total: 1 Piece – Standalone Rear Bumper Cover Shell Only

Important Component Notice

This listing includes only the rear bumper cover shell specifically stated in the Package Includes section. Backup radar sensors, sensor hardware, trim pieces, reflectors, brackets, retainers, absorber components, reinforcement bars, exhaust trim components, fasteners, clips, and other surrounding parts are not included unless specifically stated otherwise. The bumper cover includes the described 4 pre-molded backup radar sensor holes only. Electronic sensors and related hardware are not included. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the Product Description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original rear bumper cover, vehicle trim, rear fascia configuration, backup sensor layout, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the 2016-2019 Nissan Sentra SL, Nismo, Premium, and SR 7th Gen post-facelift configuration with 4 backup radar sensor holes. Please confirm these features and the listed interchange numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. or Nissan North America, Inc. Nissan® and Sentra® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, sensor configuration, mounting points, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Description

This Rear Bumper Cover Replacement is designed for 2016-2019 Nissan Sentra Standard Base S and SV Trims Only with the 7th Gen post-facelift rear-end configuration and smooth non-sensor deep-pocket trailing layout. The bumper cover serves as the exterior rear fascia shell and is suitable for replacing a cracked, scraped, dented, deformed, or collision-damaged original rear bumper cover. Its molded profile is designed to correspond with the specified post-facelift rear-body contours and surrounding mounting areas. This listing includes the standalone rear bumper cover shell only – NI1100311 / OEM: 62022-4FU0A.

Interchange Part Numbers

Please compare your vehicle trim, rear bumper configuration, sensor layout, and reference numbers with the information below before ordering.

Key Features

• Standalone 1-piece rear bumper cover replacement shell

• Designed for 2016-2019 Nissan Sentra Base S and SV trims

• 7th Gen post-facelift rear fascia configuration

• Smooth non-sensor bumper layout

• Deep-pocket trailing rear fascia design

• Molded profile for the corresponding rear-body and mounting layout

• Suitable for collision repair, exterior restoration, and damaged bumper replacement

Technical Fitment Notes

This rear bumper cover is intended specifically for the 2016-2019 Nissan Sentra 7th Gen post-facelift configuration. The molded fascia profile is designed around the corresponding rear-end layout, including the outer corner contours, deep-pocket trailing areas, lower fascia structure, and mounting locations. Important: This bumper cover is intended for the smooth non-sensor configuration. It should not be treated as interchangeable with rear bumper covers that use factory-molded parking sensor openings or another rear fascia configuration with different openings or mounting points. When matched to the correct vehicle, trim, and bumper configuration, this cover is designed as a direct replacement-style exterior body component for the corresponding mounting locations.

Package Includes

• 1 × Rear Bumper Cover Face Shell

Total: 1 Piece – Standalone Rear Bumper Cover Shell Only

Important Component Notice

This listing includes only the rear bumper cover shell specifically stated in the Package Includes section. Parking sensors, sensor hardware, trim pieces, reflectors, brackets, retainers, absorber components, reinforcement bars, exhaust trim components, fasteners, clips, and other surrounding parts are not included unless specifically stated otherwise. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the Product Description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original rear bumper cover, vehicle trim, rear fascia configuration, sensor layout, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the 2016-2019 Nissan Sentra Standard Base S and SV 7th Gen post-facelift smooth non-sensor configuration. Please confirm your vehicle trim, existing bumper layout, and listed interchange numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. or Nissan North America, Inc. Nissan® and Sentra® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, sensor configuration, mounting points, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Description

This Front Bumper Cover Replacement is designed for 2016-2019 Nissan Sentra SL, Nismo, and Premium Trims Only with the 7th Gen post-facelift front-end configuration and pre-molded front parking radar sensor holes. The bumper cover serves as the exterior front fascia shell and is suitable for replacing a cracked, scraped, dented, deformed, or collision-damaged original front bumper cover. Its molded profile is designed to correspond with the specified post-facelift front-end contours while retaining the required sensor-hole configuration. This listing includes the standalone front bumper cover shell only – NI1000315 / OEM: 62022-4FU1H, finished in primed black.

Interchange Part Numbers

Please compare your vehicle trim, front bumper configuration, sensor layout, and reference numbers with the information below before ordering.

Key Features

• Standalone 1-piece front bumper cover replacement shell

• Designed for 2016-2019 Nissan Sentra SL, Nismo, and Premium trims

• 7th Gen post-facelift front fascia configuration

• Pre-molded front parking radar sensor holes

• Primed black surface ready for proper paint preparation and refinishing

• Molded profile for the corresponding front fascia and mounting layout

• Suitable for collision repair, exterior restoration, and damaged bumper replacement

Technical Fitment Notes

This front bumper cover is intended specifically for the 2016-2019 Nissan Sentra 7th Gen post-facelift SL, Nismo, and Premium configuration. The molded fascia profile incorporates pre-molded front parking radar sensor holes as part of the bumper shell design. These openings are an important configuration detail when comparing this replacement with the existing front bumper cover. Important: This bumper cover is intended for vehicles equipped with the corresponding front parking radar sensor hole configuration. It should not be treated as interchangeable with a smooth non-sensor bumper cover or another fascia configuration that uses a different sensor-hole or mounting layout. When matched to the correct vehicle, trim, and bumper configuration, this cover is designed as a direct replacement-style exterior body component for the corresponding mounting locations.

Package Includes

• 1 × Front Bumper Cover Face Shell

Total: 1 Piece – Standalone Front Bumper Cover Shell Only

Important Component Notice

This listing includes only the front bumper cover shell specifically stated in the Package Includes section. Parking radar sensors, sensor hardware, grilles, grille inserts, trim pieces, emblems, brackets, retainers, absorber components, reinforcement bars, fog light components, fasteners, clips, and other surrounding parts are not included unless specifically stated otherwise. The bumper cover includes the described pre-molded sensor holes only. Electronic sensors and related hardware are not included. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the Product Description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original front bumper cover, vehicle trim, front fascia configuration, parking sensor layout, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the 2016-2019 Nissan Sentra SL, Nismo, and Premium 7th Gen post-facelift configuration with pre-molded front parking radar sensor holes. Please confirm these features and the listed interchange numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. or Nissan North America, Inc. Nissan® and Sentra® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, sensor configuration, mounting points, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Description

This Front Bumper Cover Replacement is designed for 2016-2019 Nissan Sentra Standard Base S and SV Trims Only with the 7th Gen post-facelift front-end configuration and smooth non-sensor V-Motion grille layout. The bumper cover serves as the exterior front fascia shell and is suitable for replacing a cracked, scraped, dented, deformed, or collision-damaged original front bumper cover. Its molded profile is designed to correspond with the specified post-facelift grille opening, front fascia contours, and surrounding mounting areas. This listing includes the standalone front bumper cover shell only – NI1000314 / OEM: 62022-4FU0H Core Spec, finished in primed black.

Interchange Part Numbers

Please compare your vehicle trim, front bumper configuration, sensor layout, and reference numbers with the information below before ordering.

Key Features

• Standalone 1-piece front bumper cover replacement shell

• Designed for 2016-2019 Nissan Sentra Base S and SV trims

• 7th Gen post-facelift front fascia configuration

• Smooth non-sensor bumper layout

• V-Motion grille front-end configuration

• Primed black surface ready for proper paint preparation and refinishing

• Suitable for collision repair, exterior restoration, and damaged bumper replacement

Technical Fitment Notes

This front bumper cover is intended specifically for the 2016-2019 Nissan Sentra 7th Gen post-facelift configuration. The molded fascia profile is designed around the corresponding post-facelift front-end layout, including the V-Motion grille opening, front corner contours, lower fascia structure, and mounting locations. Important: This bumper cover is intended for the smooth non-sensor configuration. It should not be treated as interchangeable with bumper covers that use factory-molded parking sensor openings or another front fascia configuration with different openings or mounting layouts. When matched to the correct vehicle, trim, and bumper configuration, this cover is designed as a direct replacement-style exterior body component for the corresponding mounting locations.

Package Includes

• 1 × Front Bumper Cover Face Shell

Total: 1 Piece – Standalone Front Bumper Cover Shell Only

Important Component Notice

This listing includes only the front bumper cover shell specifically stated in the Package Includes section. Grilles, grille inserts, trim pieces, emblems, parking sensors, sensor hardware, brackets, retainers, absorber components, reinforcement bars, fog light components, fasteners, clips, and other surrounding parts are not included unless specifically stated otherwise. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the Product Description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original front bumper cover, vehicle trim, front fascia configuration, sensor layout, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the 2016-2019 Nissan Sentra Standard Base S and SV 7th Gen post-facelift smooth non-sensor configuration. Please confirm your vehicle trim, existing bumper layout, and listed interchange numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. or Nissan North America, Inc. Nissan® and Sentra® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, sensor configuration, mounting points, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Description

This Rear Bumper Cover Lower Replacement is designed for 2019-2022 Nissan Altima Limited, SL, and Platinum Trims Only with the 6th Gen pre-facelift rear-end configuration and pre-molded 4 backup radar sensor holes. This lower rear bumper cover helps restore the exterior lower fascia area after cracking, impact damage, deformation, scraping, or collision repair. Its molded profile is designed to correspond with the specified rear bumper configuration while retaining the required sensor-hole layout. This listing includes the standalone rear lower bumper cover only – NI1100312 / OEM: 85022-6MA5H, finished in automotive-grade black.

Interchange Part Numbers

Please compare your vehicle trim, rear bumper configuration, sensor layout, and reference numbers with the information below before ordering.

Key Features

• Standalone rear lower bumper cover replacement

• Designed for 2019-2022 Nissan Altima Limited, SL, and Platinum trims

• 6th Gen pre-facelift rear fascia configuration

• Pre-molded with 4 backup radar sensor holes

• Automotive-grade black finish

• Molded profile for the corresponding rear bumper and lower fascia layout

• Suitable for collision repair, exterior restoration, and damaged lower bumper replacement

Technical Fitment Notes

This rear lower bumper cover is intended specifically for the 2019-2022 Nissan Altima 6th Gen pre-facelift Limited, SL, and Platinum configuration. The molded lower fascia profile incorporates 4 pre-molded backup radar sensor holes as part of the bumper design. These openings are an important configuration detail when comparing this replacement with the existing rear bumper component. Important: This component is intended for vehicles equipped with the corresponding 4 backup radar sensor hole configuration. It should not be treated as interchangeable with a smooth non-sensor lower bumper cover or another rear fascia configuration that uses a different sensor-hole or mounting layout. When matched to the correct vehicle and bumper configuration, this lower cover is designed as a direct replacement-style exterior body component for the corresponding mounting locations.

Package Includes

• 1 × Rear Bumper Cover Lower

Total: 1 Piece – Standalone Rear Lower Bumper Cover Only

Important Component Notice

This listing includes only the rear lower bumper cover specifically stated in the Package Includes section. Backup radar sensors, sensor hardware, upper bumper cover, trim pieces, reflectors, brackets, retainers, absorber components, reinforcement bars, exhaust trim components, fasteners, clips, and other surrounding parts are not included unless specifically stated otherwise. The component includes the described pre-molded 4 backup radar sensor holes only. Electronic sensors and related hardware are not included. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the Product Description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original rear bumper component, vehicle trim, fascia configuration, sensor-hole layout, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the 2019-2022 Nissan Altima Limited, SL, and Platinum 6th Gen pre-facelift configuration with 4 backup radar sensor holes. Please confirm these features and the listed interchange numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. or Nissan North America, Inc. Nissan® and Altima® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, sensor configuration, mounting points, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Description

This Rear Bumper Cover Replacement is designed for 2019-2022 Nissan Altima Standard S, SR, and SV Trims Only with the 6th Gen pre-facelift rear-end configuration and flush smooth non-sensor slim-reflector pocket layout. The bumper cover serves as the exterior rear fascia shell and is suitable for replacing a cracked, scraped, dented, deformed, or collision-damaged original rear bumper cover. Its molded profile is designed to correspond with the specified pre-facelift rear-body contours, reflector pocket areas, and surrounding mounting locations. This listing includes the standalone rear bumper cover shell only – NI1100311 / OEM: 85022-6CA0H Core Spec.

Interchange Part Numbers

Please compare your vehicle trim, rear bumper configuration, sensor layout, and reference numbers with the information below before ordering.

Key Features

• Standalone 1-piece rear bumper cover replacement shell

• Designed for 2019-2022 Nissan Altima S, SR, and SV trims

• 6th Gen pre-facelift rear fascia configuration

• Flush smooth non-sensor bumper layout

• Slim-reflector pocket configuration

• Molded profile for the corresponding rear-body and mounting layout

• Suitable for collision repair, exterior restoration, and damaged bumper replacement

Technical Fitment Notes

This rear bumper cover is intended specifically for the 2019-2022 Nissan Altima 6th Gen pre-facelift configuration. The molded fascia profile is designed around the corresponding rear-end layout, including the outer corner contours, slim-reflector pocket areas, lower fascia structure, and mounting locations. Important: This bumper cover is intended for the flush smooth non-sensor configuration. It should not be treated as interchangeable with rear bumper covers that use factory-molded parking sensor openings or another rear fascia configuration with different openings or mounting points. When matched to the correct vehicle and bumper configuration, this cover is designed as a direct replacement-style exterior body component for the corresponding mounting locations.

Package Includes

• 1 × Rear Bumper Cover Face Shell

Total: 1 Piece – Standalone Rear Bumper Cover Shell Only

Important Component Notice

This listing includes only the rear bumper cover shell specifically stated in the Package Includes section. Reflectors, parking sensors, sensor hardware, trim pieces, brackets, retainers, absorber components, reinforcement bars, exhaust trim components, fasteners, clips, and other surrounding parts are not included unless specifically stated otherwise. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the Product Description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original rear bumper cover, vehicle trim, fascia configuration, sensor layout, reflector pocket layout, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the 2019-2022 Nissan Altima Standard S, SR, and SV 6th Gen pre-facelift smooth non-sensor configuration. Please confirm your vehicle trim, existing bumper layout, and listed interchange numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. or Nissan North America, Inc. Nissan® and Altima® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, sensor configuration, reflector configuration, mounting points, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Overview

This aftermarket front bumper cover is designed for 2014–2016 Nissan Rogue S & SV pre-facelift models, using the non-sensor smooth short-grille front fascia configuration. The bumper cover is molded from durable automotive-grade impact-resistant plastic and supplied in a primed black finish for professional preparation and color matching. Its cleaner short-grille layout is intended to match the corresponding standard-trim Rogue front-end design, making it a practical replacement for bumpers damaged by collisions, cracks, deep scrapes, deformation, or previous repair work.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face / Fascia Shell

Front Fascia Configuration

This bumper cover is intended specifically for 2014–2016 Nissan Rogue S & SV pre-facelift models with the non-sensor smooth short-grille layout. Before ordering, compare the original bumper’s grille opening shape, sensor-hole configuration, side openings, mounting tabs, and overall fascia profile. Rogue bumper designs can vary by trim and equipment package, so the visual layout should match before purchase.

What Is Not Included

This listing includes the front bumper cover shell only. Upper or lower grille components, side inserts or bezels, brackets, retainers, reinforcement parts, lighting components, sensors, emblems, and mounting hardware are not included unless specifically identified in the package contents.

Paint & Body-Shop Preparation

The bumper cover arrives in a primed black, unpainted finish and requires final preparation and painting before installation. Test-fit the fascia prior to paintwork to confirm alignment around the grille opening, fenders, headlights, and mounting locations. Professional surface preparation, color matching, refinishing, and installation are recommended.

Shipping & Shape Recovery

Front bumper covers are flexible exterior body panels and may experience minor temporary flexing during packaging or transit. After unpacking, allow the fascia to rest at room temperature and recover its normal contour before test-fitting or beginning paint preparation.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. Nissan® and Rogue® are registered trademarks of Nissan Motor Co., Ltd. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, front fascia configuration, and existing components before purchase.

Product Description

This Front Bumper Cover Replacement is designed for 2019-2022 Nissan Altima Limited, SL, and Platinum Trims Only with the 6th Gen pre-facelift front-end configuration and pre-molded 2 intelligent front parking radar sensor holes. The bumper cover serves as the exterior front fascia shell and is suitable for replacing a cracked, scraped, dented, deformed, or collision-damaged original bumper cover. Its molded profile is designed to correspond with the specified pre-facelift front-end layout while retaining the required sensor-hole configuration. This listing includes the standalone front bumper cover shell only – NI1000373 / OEM: 62022-6CA1H, finished in primed black.

Interchange Part Numbers

Please compare your vehicle trim, front bumper configuration, sensor layout, and reference numbers with the information below before ordering.

Key Features

• Standalone 1-piece front bumper cover replacement shell

• Designed for 2019-2022 Nissan Altima Limited, SL, and Platinum trims

• 6th Gen pre-facelift front fascia configuration

• Pre-molded with 2 front parking radar sensor holes

• Primed black surface ready for proper paint preparation and refinishing

• Molded profile for the corresponding front bumper and surrounding mounting layout

• Suitable for collision repair, exterior restoration, and damaged bumper replacement

Technical Fitment Notes

This front bumper cover is intended specifically for the 2019-2022 Nissan Altima 6th Gen pre-facelift Limited, SL, and Platinum configuration. The molded fascia profile incorporates 2 pre-molded front parking radar sensor holes as part of the bumper shell design. These openings are an important configuration detail when comparing this replacement with the existing front bumper cover. Important: This bumper cover is intended for vehicles equipped with the corresponding 2 front parking radar sensor hole configuration. It should not be treated as interchangeable with a smooth non-sensor bumper cover or another fascia configuration that uses a different sensor-hole or mounting layout. When matched to the correct vehicle and bumper configuration, this cover is designed as a direct replacement-style exterior body component for the corresponding mounting locations.

Package Includes

• 1 × Front Bumper Cover Face Shell

Total: 1 Piece – Standalone Front Bumper Cover Shell Only

Important Component Notice

This listing includes only the front bumper cover shell specifically stated in the Package Includes section. Parking radar sensors, sensor hardware, grilles, grille inserts, trim pieces, emblems, brackets, retainers, absorber components, reinforcement bars, fog light components, fasteners, clips, and other surrounding parts are not included unless specifically stated otherwise. The bumper cover includes the described 2 pre-molded front parking radar sensor holes only. Electronic sensors and related hardware are not included. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the Product Description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original bumper cover, vehicle trim, front fascia configuration, parking sensor layout, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the 2019-2022 Nissan Altima Limited, SL, and Platinum 6th Gen pre-facelift configuration with 2 front parking radar sensor holes. Please confirm these features and the listed interchange numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. or Nissan North America, Inc. Nissan® and Altima® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, sensor configuration, mounting points, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Description

This Front Bumper Cover Replacement is designed for 2019-2022 Nissan Altima Standard S, SR, and SV Trims Only with the 6th Gen pre-facelift front-end configuration and flush smooth non-sensor Giant V-Motion bumper layout. The bumper cover serves as the exterior front fascia shell and is suitable for replacing a cracked, scraped, dented, deformed, or collision-damaged original bumper cover. Its molded profile is designed to correspond with the specified pre-facelift front-end contours, grille opening, and surrounding mounting areas. This listing includes the standalone front bumper cover shell only – NI1000366 / OEM: 62022-6CA0H, finished in primed black.

Interchange Part Numbers

Please compare your vehicle trim, front bumper configuration, sensor layout, and reference numbers with the information below before ordering.

Key Features

• Standalone 1-piece front bumper cover replacement shell

• Designed for 2019-2022 Nissan Altima S, SR, and SV trims

• 6th Gen pre-facelift front fascia configuration

• Flush smooth non-sensor bumper layout

• Giant V-Motion front grille profile

• Primed black surface ready for proper paint preparation and refinishing

• Suitable for collision repair, exterior restoration, and damaged bumper replacement

Technical Fitment Notes

This front bumper cover is intended specifically for the 2019-2022 Nissan Altima 6th Gen pre-facelift configuration. The molded fascia profile is designed around the corresponding pre-facelift front-end layout, including the Giant V-Motion grille opening, headlight-side contours, lower fascia structure, and mounting locations. Important: This bumper cover is intended for the flush smooth non-sensor configuration. It should not be treated as interchangeable with bumper covers that use factory-molded parking sensor openings or other front fascia configurations with different openings or mounting layouts. This component is intended for the 2019-2022 pre-facelift design. Please verify the vehicle year, trim, bumper configuration, and existing mounting layout before ordering. When matched to the correct vehicle and bumper configuration, this cover is designed as a direct replacement-style exterior body component for the corresponding mounting locations.

Package Includes

• 1 × Front Bumper Cover Face Shell

Total: 1 Piece – Standalone Front Bumper Cover Shell Only

Important Component Notice

This listing includes only the front bumper cover shell specifically stated in the Package Includes section. Grilles, grille inserts, trim pieces, emblems, parking sensors, sensor hardware, brackets, retainers, absorber components, reinforcement bars, fog light components, fasteners, clips, and other surrounding parts are not included unless specifically stated otherwise. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the Product Description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original bumper cover, vehicle trim, front fascia configuration, sensor layout, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the 2019-2022 Nissan Altima Standard S, SR, and SV 6th Gen pre-facelift smooth non-sensor configuration. Please confirm these features and the listed interchange numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. or Nissan North America, Inc. Nissan® and Altima® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, sensor configuration, mounting points, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Description

This Rear Bumper Cover Lower Replacement is designed for 2016-2018 Nissan Altima Limited Trims Only with the mid-cycle facelift rear-end configuration and pre-molded 4 backup radar sensor holes. This lower rear bumper cover helps restore the exterior lower fascia area after cracking, impact damage, deformation, or collision repair. Its molded profile is designed to correspond with the specified rear bumper configuration while retaining the required sensor-hole layout. This listing includes the standalone rear lower bumper cover only – NI1100294, finished in automotive-grade black.

Interchange Part Numbers

Please compare your vehicle trim, rear bumper configuration, sensor layout, and reference numbers with the information below before ordering.

Key Features

• Standalone rear lower bumper cover replacement

• Designed for 2016-2018 Nissan Altima Limited trims

• Mid-cycle facelift rear fascia configuration

• Pre-molded with 4 backup radar sensor holes

• Black exterior finish

• Molded profile for the corresponding rear bumper layout

• Suitable for collision repair, exterior restoration, and damaged lower bumper replacement

Technical Fitment Notes

This rear lower bumper cover is intended specifically for the 2016-2018 Nissan Altima Limited mid-cycle facelift configuration. The molded lower fascia profile incorporates 4 pre-molded backup radar sensor holes as part of the bumper design. These openings are an important configuration detail when comparing this replacement with the existing rear bumper component. Important: This component is intended for vehicles equipped with the corresponding 4 backup radar sensor hole configuration. It should not be treated as interchangeable with a smooth non-sensor lower bumper cover or another rear fascia configuration that uses a different sensor-hole or mounting layout. When matched to the correct vehicle and bumper configuration, this lower cover is designed as a direct replacement-style exterior body component for the corresponding mounting locations.

Package Includes

• 1 × Rear Bumper Cover Lower

Total: 1 Piece – Standalone Rear Lower Bumper Cover Only

Important Component Notice

This listing includes only the rear lower bumper cover specifically stated in the Package Includes section. Backup radar sensors, sensor hardware, upper bumper cover, trim pieces, reflectors, brackets, retainers, absorber components, reinforcement bars, fasteners, clips, and other surrounding parts are not included unless specifically stated otherwise. The component includes the described pre-molded 4 backup radar sensor holes only. Electronic sensors and related hardware are not included. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the Product Description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original rear bumper component, vehicle trim, fascia configuration, sensor-hole layout, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the 2016-2018 Nissan Altima Limited mid-cycle facelift configuration with 4 backup radar sensor holes. Please confirm these features and the listed interchange numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. or Nissan North America, Inc. Nissan® and Altima® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, sensor configuration, mounting points, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Description

This Rear Bumper Cover Replacement is designed for 2016-2018 Nissan Altima Base S, SR, SV, and SL Trims Only with the mid-cycle facelift rear-end configuration and smooth non-sensor panel layout. The bumper cover serves as the exterior rear fascia shell and is suitable for replacing a cracked, scraped, dented, deformed, or collision-damaged original rear bumper cover. Its molded profile is designed to correspond with the specified facelift rear-body contours and surrounding mounting areas. This listing includes the standalone rear bumper cover shell only – NI1100293 / OEM: 85022-9HS0H, finished in primed black.

Interchange Part Numbers

Please compare your vehicle trim, rear bumper configuration, and reference numbers with the information below before ordering.

Key Features

• Standalone 1-piece rear bumper cover replacement shell

• Designed for 2016-2018 Nissan Altima mid-cycle facelift models

• Suitable for Base S, SR, SV, and SL trim applications

• Smooth non-sensor rear bumper configuration

• Molded fascia profile for the corresponding rear-body layout

• Primed black surface ready for proper paint preparation and refinishing

• Suitable for collision repair, exterior restoration, and damaged bumper replacement

Technical Fitment Notes

This rear bumper cover is intended specifically for the 2016-2018 Nissan Altima mid-cycle facelift configuration. The molded fascia profile is designed around the corresponding rear-end layout, including the outer corner contours, lower fascia structure, and mounting locations. Important: This bumper cover is intended for the smooth non-sensor configuration. It should not be treated as interchangeable with rear bumper covers that use factory-molded parking sensor openings or another fascia configuration with different openings or mounting points. When matched to the correct vehicle application and bumper configuration, this cover is designed as a direct replacement-style exterior body component for the corresponding mounting locations.

Package Includes

• 1 × Rear Bumper Cover Face Shell

Total: 1 Piece – Standalone Rear Bumper Cover Shell Only

Important Component Notice

This listing includes only the rear bumper cover shell specifically stated in the Package Includes section. Parking sensors, sensor hardware, trim pieces, reflectors, brackets, retainers, absorber components, reinforcement bars, exhaust trim components, fasteners, clips, and other surrounding parts are not included unless specifically stated otherwise. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the Product Description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original rear bumper cover, vehicle trim, fascia configuration, sensor layout, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the 2016-2018 Nissan Altima Base S, SR, SV, and SL mid-cycle facelift smooth non-sensor configuration. Please confirm your vehicle trim, existing bumper layout, and listed interchange numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. or Nissan North America, Inc. Nissan® and Altima® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, sensor configuration, mounting points, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Description

This Front Bumper Cover Replacement is designed for 2016-2018 Nissan Altima Limited/SL/Platinum Trims with the mid-cycle facelift front-end configuration, pre-molded 2 intelligent front parking radar sensor holes, and tow eye slot. The bumper cover serves as the exterior front fascia shell and is suitable for replacing a cracked, scraped, dented, deformed, or collision-damaged original bumper cover. Its molded profile is designed to correspond with the specified facelift front-end layout while retaining the required sensor openings and tow eye slot configuration. This listing includes the standalone front bumper cover shell only – NI1000306 / OEM: 52119-9HS0H Core Spec, finished in automotive-grade primed black.

Interchange Part Numbers

Please compare your vehicle trim, bumper configuration, sensor layout, and reference numbers with the information below before ordering.

Key Features

• Standalone 1-piece front bumper cover replacement shell

• Designed for 2016-2018 Nissan Altima Limited/SL/Platinum trims

• Mid-cycle facelift front fascia configuration

• Pre-molded with 2 front parking radar sensor holes

• Integrated tow eye slot configuration

• Automotive-grade primed black surface

• Molded profile for the corresponding bumper, grille, and surrounding mounting layout

• Suitable for collision repair, exterior restoration, and damaged bumper replacement

Technical Fitment Notes

This front bumper cover is intended specifically for the 2016-2018 Nissan Altima Limited/SL/Platinum mid-cycle facelift configuration. The fascia profile incorporates 2 pre-molded front parking radar sensor holes and a tow eye slot as part of the bumper shell design. These configuration details are important when comparing this replacement with the existing bumper on the vehicle. Important: This bumper cover is intended for Limited/SL/Platinum Trims with the corresponding 2 front parking radar sensor hole and tow eye slot configuration. It should not be treated as interchangeable with a smooth non-sensor bumper cover or another fascia configuration that uses a different opening or mounting layout. When matched to the correct vehicle and bumper configuration, this cover is designed as a direct replacement-style exterior body component for the corresponding mounting locations.

Package Includes

• 1 × Front Bumper Cover Face Shell

Total: 1 Piece – Standalone Front Bumper Cover Shell Only

Important Component Notice

This listing includes only the front bumper cover shell specifically stated in the Package Includes section. Parking radar sensors, sensor hardware, tow eye components, tow eye cover, grilles, grille inserts, trim pieces, emblems, brackets, retainers, absorber components, reinforcement bars, fog light components, fasteners, clips, and other surrounding parts are not included unless specifically stated otherwise. The bumper cover includes the described pre-molded sensor holes and tow eye slot only. Electronic sensors and related components are not included. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the Product Description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original bumper cover, vehicle trim, front fascia configuration, parking sensor layout, tow eye slot, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the 2016-2018 Nissan Altima Limited/SL/Platinum mid-cycle facelift configuration with 2 front parking radar sensor holes and tow eye slot. Please confirm these features and the listed interchange numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. or Nissan North America, Inc. Nissan® and Altima® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, sensor configuration, tow eye configuration, mounting points, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Description

This Front Bumper Cover Replacement is designed for 2016-2018 Nissan Altima Base S, SR, SV, and SL trims with the mid-cycle facelift front-end configuration and smooth non-sensor bumper layout. This bumper cover serves as the exterior front fascia shell and is suitable for replacing a cracked, scraped, dented, deformed, or collision-damaged original bumper cover. Its molded profile corresponds with the facelift grille opening, headlight-side contours, and surrounding mounting areas. This listing includes the standalone 1-piece front bumper cover shell only – NI1000305 / OEM: 52119-9HS0A Core Spec.

Interchange Part Numbers

Please compare your vehicle trim, bumper configuration, and reference numbers with the information below before ordering.

Key Features

• Standalone 1-piece front bumper cover replacement shell

• Designed for 2016-2018 Nissan Altima mid-cycle facelift models

• Suitable for Base S, SR, SV, and SL trim applications

• Smooth non-sensor front bumper configuration

• Molded fascia profile for the corresponding grille and headlight-side layout

• Primed black surface ready for proper paint preparation and refinishing

• Suitable for collision repair, exterior restoration, and damaged bumper replacement

Technical Fitment Notes

This front bumper cover is intended specifically for the 2016-2018 Nissan Altima mid-cycle facelift configuration. The molded fascia profile is designed around the corresponding facelift front-end layout, including the grille opening, headlight-side contours, lower fascia structure, and mounting locations. Important: This bumper cover is intended for the smooth non-sensor configuration. It should not be treated as interchangeable with bumper covers that are factory-molded with parking sensor openings or other different front fascia configurations. This component is also intended for the 2016-2018 facelift design and should not be treated as interchangeable with the earlier 2013-2015 pre-facelift front bumper configuration, which uses a different fascia shape and mounting layout. When matched to the correct vehicle application and bumper configuration, this cover is designed as a direct replacement-style body component for the corresponding mounting locations.

Package Includes

• 1 × Front Bumper Cover Face Shell

Total: 1 Piece – Standalone Front Bumper Cover Shell Only

Important Component Notice

This listing includes only the front bumper cover shell specifically stated in the Package Includes section. Grilles, grille inserts, trim pieces, emblems, parking sensors, sensor hardware, brackets, retainers, absorber components, reinforcement bars, fog light components, fasteners, clips, and other surrounding parts are not included unless specifically stated otherwise. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the Product Description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original bumper cover, vehicle trim, front fascia configuration, sensor layout, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the 2016-2018 mid-cycle facelift smooth non-sensor configuration. Please confirm your vehicle year, Base S / SR / SV / SL trim application, existing bumper layout, and corresponding reference number before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. or Nissan North America, Inc. Nissan® and Altima® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, sensor configuration, mounting points, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Overview

Designed for 2022–2025 Toyota RAV4 Limited post-facelift models, this aftermarket rear bumper cover features four pre-molded backup radar sensor holes to match the corresponding flagship rear fascia configuration. Manufactured from durable automotive-grade impact-resistant plastic, the bumper cover is supplied in a black finish and provides a direct replacement solution for rear fascia panels affected by collision damage, cracks, deep scrapes, deformation, or previous repair work.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

Sensor & Application Verification

This bumper cover is intended specifically for 2022–2025 Toyota RAV4 Limited post-facelift configurations with four pre-molded rear backup radar sensor holes. Before ordering, compare the sensor-hole count and placement, reflector areas, lower bumper profile, mounting locations, and reference numbers with your original part. Non-sensor versions or other trim configurations may use a different rear fascia.

Components Not Included

This listing includes the rear bumper cover fascia shell only. Backup radar sensors, sensor brackets or retainers, reflectors, lower valance or garnish components, reinforcement parts, mounting hardware, and other surrounding rear bumper accessories are not included unless specifically stated in the package contents.

Finish & Installation

The bumper cover is supplied in a black exterior finish. The surface should be inspected before final installation to determine whether additional preparation or refinishing is required. Test-fit the bumper before final installation to verify sensor-hole positioning, reflector alignment, surrounding panel fitment, and mounting locations. Professional installation is recommended for the best finished result.

Packaging & Shape Recovery

Rear bumper covers are large, flexible exterior panels and may experience minor temporary flexing during packaging or transportation. After unpacking, allow the bumper cover to rest at room temperature and return to its natural contour before test-fitting or refinishing.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and RAV4® are registered trademarks of Toyota Motor Corporation. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, sensor configuration, and existing components before purchase.

Product Overview

Built for 2022–2025 Toyota RAV4 Limited post-facelift models, this aftermarket front bumper cover features two pre-molded front parking radar sensor holes to match the corresponding premium-trim fascia configuration. The shell is formed from durable automotive-grade impact-resistant plastic and supplied in a primed black finish for professional prep and refinishing. Its sensor-ready layout makes it a practical replacement for front bumpers affected by collision damage, cracks, heavy scrapes, deformation, or prior repair work.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

Radar & Fitment Check

This bumper cover is intended specifically for 2022–2025 Toyota RAV4 Limited post-facelift configurations with two pre-molded front parking radar sensor holes. Before ordering, compare the sensor-hole count and placement, grille openings, lower fascia profile, side openings, mounting locations, and reference numbers with your original bumper. Non-sensor or other trim-specific front fascia layouts may require a different cover.

Components Sold Separately

This listing includes the front bumper cover fascia shell only. Parking radar sensors, sensor brackets or retainers, grille components, side bezels or inserts, reinforcement parts, lighting components, emblems, mounting hardware, and other surrounding bumper accessories are not included unless specifically stated in the package contents.

Paint & Installation

The bumper cover is supplied in a primed black, unpainted finish and requires final surface preparation, color matching, and professional painting before installation. Test-fit the fascia before paintwork to verify sensor-hole positioning, grille alignment, and mounting-point fitment. Professional refinishing and installation are recommended for the best final result.

Packaging & Handling

Because front bumper covers are large, flexible exterior panels, minor temporary flexing may occur during packaging or transportation. After unpacking, allow the bumper cover to rest at room temperature and recover its natural contour before test-fitting, preparation, or painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and RAV4® are registered trademarks of Toyota Motor Corporation. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, radar configuration, and existing components before purchase.

Product Description

This Rear Bumper Bracket Right Passenger Side Fender Support Guide is designed for 2017-2022 Honda CR-V (5th Gen Household Compact SUV All Models) and installs at the right-hand passenger-side rear bumper and quarter-edge mounting area. This quarter edge lock retainer clip plate helps support, guide, and secure the rear bumper cover along the passenger-side outer corner. It is suitable for replacing a guide bracket that is cracked, broken, loose, missing, or damaged during bumper removal, collision repair, or other rear-end repair work. This listing includes the Right Passenger Side (RH) single component only – HO1143125 / OEM: 71593-TNY-A01 Core Spec.

Interchange Part Numbers

Please compare the component and reference numbers below with your existing part before ordering.

Key Features

• Right Passenger Side (RH) rear bumper fender support guide

• Helps support and guide the rear bumper cover along the quarter edge

• Integrated retention points for the corresponding mounting location

• Suitable for replacing cracked, broken, loose, damaged, or missing bumper guides

• Useful for bumper replacement, collision repair, and rear-end restoration

• Single-component replacement for the corresponding RH mounting position

Technical Fitment Notes

This rear bumper fender support guide is intended specifically for the 2017-2022 5th Gen Honda CR-V configuration. The molded guide profile, snap-in retention points, and mounting locations are designed to correspond with the right-hand passenger-side rear bumper and quarter-edge mounting area, helping maintain proper positioning and support of the rear bumper cover. Important: This component is intended for the 2017-2022 5th Gen Honda CR-V framework and should not be treated as interchangeable with different vehicle platform or generation mounting layouts. Other applications may use different bumper support profiles, anchor locations, and retention points. When matched to the correct vehicle application and mounting configuration, this guide is designed as a direct replacement-style component without requiring cutting, drilling, or trimming.

Package Includes

• 1 × Rear Bumper Right Passenger Side Fender Support Guide

Total: 1 Piece – Right Passenger Side (RH) Only

Important Component Notice

This listing includes only the component specifically stated in the Package Includes section. The left-side guide and any additional hardware, fasteners, clips, screws, trim pieces, brackets, accessories, or surrounding components that are not specifically listed are not included. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the product description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original guide, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the Right Passenger Side (RH) component only. Please confirm the installation side, vehicle year, 5th Gen CR-V configuration, existing rear bumper mounting layout, and reference numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Honda Motor Co., Ltd. or American Honda Motor Co., Inc. Honda® and CR-V® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, mounting points, installation side, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Overview

This rear bumper cover is designed for 2022–2025 Toyota RAV4 LE & XLE post-facelift models without factory sensor holes, matching the standard rear fascia configuration used on these trims. Manufactured from durable automotive-grade impact-resistant plastic, the cover is supplied in a primed black finish for professional surface preparation and repainting. It provides a clean replacement solution for rear bumpers affected by cracks, scrapes, deformation, collision damage, or previous repair work.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

Fitment Confirmation

This bumper cover is intended specifically for 2022–2025 Toyota RAV4 LE & XLE post-facelift configurations without parking sensor holes. Before ordering, compare the rear bumper profile, reflector locations, lower contour, mounting areas, sensor-hole layout, and reference numbers with your original part. Sensor-equipped versions or other trim configurations may use a different rear fascia.

Parts Not Included

This listing includes the rear bumper cover fascia shell only. Reflectors, lower garnish or valance components, parking sensors, sensor brackets, retainers, reinforcement components, mounting hardware, and other surrounding rear bumper parts are not included unless specifically stated in the package contents.

Paint & Installation

The bumper cover is supplied in a primed black, unpainted finish and requires final surface preparation, color matching, and professional painting before installation. Test-fitting before paintwork is strongly recommended to confirm alignment with the quarter panels, reflector areas, and mounting points. Professional installation is recommended, especially when the vehicle has previous rear collision damage.

Packaging & Shape Recovery

Large bumper fascia panels are flexible by design and may show minor temporary movement in shape while packaged or transported. After unpacking, allow the bumper cover to rest at room temperature and return to its natural contour before test-fitting, preparation, or painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and RAV4® are registered trademarks of Toyota Motor Corporation. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, sensor configuration, and existing components before purchase.

Product Description

This Rear Bumper Bracket Left Driver Side Fender Support Guide is designed for 2017-2022 Honda CR-V (5th Gen Household Compact SUV All Models) and installs at the left-hand driver-side rear bumper and quarter-edge mounting area. This quarter edge lock retainer clip plate helps support, guide, and secure the rear bumper cover along the driver-side outer corner. It is suitable for replacing a guide bracket that is cracked, broken, loose, missing, or damaged during bumper removal, collision repair, or other rear-end repair work. This listing includes the Left Driver Side (LH) single component only – HO1142125 / OEM: 71598-TNY-A01 Core Spec.

Interchange Part Numbers

Please compare the component and reference numbers below with your existing part before ordering.

Key Features

• Left Driver Side (LH) rear bumper fender support guide

• Helps support and guide the rear bumper cover along the quarter edge

• Integrated retention points for the corresponding mounting location

• Suitable for replacing cracked, broken, loose, damaged, or missing bumper guides

• Useful for bumper replacement, collision repair, and rear-end restoration

• Single-component replacement for the corresponding LH mounting position

Technical Fitment Notes

This rear bumper fender support guide is intended specifically for the 2017-2022 5th Gen Honda CR-V configuration. The molded guide profile, snap-in retention points, and mounting locations are designed to correspond with the left-hand driver-side rear bumper and quarter-edge mounting area, helping maintain proper positioning and support of the rear bumper cover. Important: This component is intended for the 2017-2022 5th Gen Honda CR-V framework and should not be treated as interchangeable with different vehicle platform or generation mounting layouts. Other applications may use different bumper support profiles, anchor locations, and retention points. When matched to the correct vehicle application and mounting configuration, this guide is designed as a direct replacement-style component without requiring cutting, drilling, or trimming.

Package Includes

• 1 × Rear Bumper Left Driver Side Fender Support Guide

Total: 1 Piece – Left Driver Side (LH) Only

Important Component Notice

This listing includes only the component specifically stated in the Package Includes section. The right-side guide and any additional hardware, fasteners, clips, screws, trim pieces, brackets, accessories, or surrounding components that are not specifically listed are not included. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the product description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original guide, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the Left Driver Side (LH) component only. Please confirm the installation side, vehicle year, 5th Gen CR-V configuration, existing rear bumper mounting layout, and reference numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Honda Motor Co., Ltd. or American Honda Motor Co., Inc. Honda® and CR-V® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, mounting points, installation side, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Description

This Front Bumper Bracket Right Passenger Side Fender Support Guide is designed for 2017-2022 Honda CR-V (5th Gen Household Compact SUV All Models) and installs at the right-hand passenger-side front bumper and outer fender-edge mounting area. This outer edge lock retainer clip plate helps support, guide, and secure the front bumper cover along the passenger-side corner. It is suitable for replacing a guide bracket that is cracked, broken, loose, missing, or damaged during bumper removal, collision repair, or other front-end repair work. This listing includes the Right Passenger Side (RH) single component only – HO1043131 / OEM: 71193-TNY-A01 Core Spec.

Interchange Part Numbers

Please compare the component and reference numbers below with your existing part before ordering.

Key Features

• Right Passenger Side (RH) front bumper fender support guide

• Helps support and guide the front bumper cover along the outer fender edge

• Integrated retention points for the corresponding mounting location

• Suitable for replacing cracked, broken, loose, damaged, or missing bumper guides

• Useful for bumper replacement, collision repair, and front-end restoration

• Single-component replacement for the corresponding RH mounting position

Technical Fitment Notes

This front bumper fender support guide is intended specifically for the 2017-2022 5th Gen Honda CR-V configuration. The molded guide profile, snap-in retention points, and mounting locations are designed to correspond with the right-hand passenger-side front bumper and outer fender-edge mounting area, helping maintain proper positioning and support of the bumper cover. Important: This component is intended for the 2017-2022 5th Gen Honda CR-V framework and should not be treated as interchangeable with alternate Honda Accord mounting configurations. Different vehicle platforms may use different bumper support profiles, anchor locations, and mounting layouts. When matched to the correct vehicle application and mounting configuration, this guide is designed as a direct replacement-style component without requiring cutting, drilling, or trimming.

Package Includes

• 1 × Front Bumper Right Passenger Side Fender Support Guide

Total: 1 Piece – Right Passenger Side (RH) Only

Important Component Notice

This listing includes only the component specifically stated in the Package Includes section. The left-side guide and any additional hardware, fasteners, clips, screws, trim pieces, brackets, accessories, or surrounding components that are not specifically listed are not included. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the product description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original guide, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the Right Passenger Side (RH) component only. Please confirm the installation side, vehicle year, 5th Gen CR-V configuration, existing mounting layout, and reference numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Honda Motor Co., Ltd. or American Honda Motor Co., Inc. Honda® and CR-V® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, mounting points, installation side, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Description

This Front Bumper Bracket Left Driver Side Fender Support Guide is designed for 2017-2022 Honda CR-V (5th Gen Household Compact SUV All Models) and installs at the left-hand driver-side front bumper and outer fender-edge mounting area. This outer edge lock retainer clip plate helps support, guide, and secure the front bumper cover along the driver-side corner. It is suitable for replacing a guide bracket that is cracked, broken, loose, missing, or damaged during bumper removal, collision repair, or other front-end repair work. This listing includes the Left Driver Side (LH) single component only – HO1042131 / OEM: 71198-TNY-A01 Core Spec.

Interchange Part Numbers

Please compare the component and reference numbers below with your existing part before ordering.

Key Features

• Left Driver Side (LH) front bumper fender support guide

• Helps support and guide the front bumper cover along the outer fender edge

• Integrated retention points for the corresponding mounting location

• Suitable for replacing cracked, broken, loose, damaged, or missing bumper guides

• Useful for bumper replacement, collision repair, and front-end restoration

• Single-component replacement for the corresponding LH mounting position

Technical Fitment Notes

This front bumper fender support guide is intended specifically for the 2017-2022 5th Gen Honda CR-V configuration. The molded guide profile, snap-in retention points, and mounting locations are designed to correspond with the left-hand driver-side front bumper and outer fender-edge mounting area, helping maintain proper positioning and support of the bumper cover. Important: This component is intended for the 2017-2022 5th Gen Honda CR-V framework and should not be treated as interchangeable with alternate Honda Accord mounting configurations. Different vehicle platforms may use different bumper support profiles, anchor locations, and mounting layouts. When matched to the correct vehicle application and mounting configuration, this guide is designed as a direct replacement-style component without requiring cutting, drilling, or trimming.

Package Includes

• 1 × Front Bumper Left Driver Side Fender Support Guide

Total: 1 Piece – Left Driver Side (LH) Only

Important Component Notice

This listing includes only the component specifically stated in the Package Includes section. The right-side guide and any additional hardware, fasteners, clips, screws, trim pieces, brackets, accessories, or surrounding components that are not specifically listed are not included. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the product description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original guide, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the Left Driver Side (LH) component only. Please confirm the installation side, vehicle year, 5th Gen CR-V configuration, existing mounting layout, and reference numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Honda Motor Co., Ltd. or American Honda Motor Co., Inc. Honda® and CR-V® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, mounting points, installation side, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Overview

Designed for the updated 2022–2025 Toyota RAV4 LE & XLE post-facelift front-end configuration, this aftermarket bumper cover offers a clean replacement solution for damaged, cracked, scraped, or previously repaired factory fascia panels. The cover is molded from durable automotive-grade impact-resistant plastic and supplied in a primed black finish for professional prep and refinishing. Its standard-trim profile is intended to match the LE/XLE bumper layout while providing a solid foundation for collision repair or cosmetic restoration.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

Fitment Verification

This bumper cover is intended for 2022–2025 Toyota RAV4 LE & XLE post-facelift models using the corresponding standard front bumper configuration. Before ordering, compare the bumper contour, grille openings, side insert areas, mounting locations, and reference numbers with the original part on your vehicle. Other trims may use a different fascia layout.

Components Sold Separately

This listing includes the front bumper cover fascia shell only. Grille assemblies, side bezels or inserts, brackets, retainers, reinforcement components, lighting parts, sensors, emblems, mounting hardware, and other surrounding bumper components are not included unless specifically listed in the package contents.

Paint Preparation & Installation

The supplied primed black finish is intended for professional refinishing and is not the vehicle’s final exterior color. Test-fit the bumper before painting to confirm alignment with the surrounding body panels, grille openings, and mounting points. Proper surface preparation, color matching, painting, and professional installation are recommended.

Packaging & Handling

Automotive bumper covers are flexible exterior panels and may experience minor temporary flexing during packaging or transportation. After unpacking, allow the bumper cover to rest at room temperature and recover its natural contour before test-fitting or beginning refinishing work.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and RAV4® are registered trademarks of Toyota Motor Corporation. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, and existing components before purchase.

Product Overview

This aftermarket rear bumper cover is designed for 2019–2021 Toyota RAV4 Limited pre-facelift models equipped with four rear backup radar sensor holes. Made from durable automotive-grade impact-resistant plastic, the fascia comes in a primed black finish for professional preparation and repainting. Its four pre-molded sensor openings are configured for the corresponding Limited-trim rear bumper layout, making it suitable for collision repair, exterior restoration, or replacement of a damaged original fascia.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

Sensor & Fitment Check

This rear bumper cover is intended specifically for 2019–2021 Toyota RAV4 Limited pre-facelift configurations with four pre-molded backup radar sensor holes. Before ordering, compare the sensor-hole count and placement, reflector areas, lower bumper contour, mounting points, and reference numbers with your original part. Non-sensor versions or other trim configurations may use a different rear fascia.

Components Not Included

This listing includes the rear bumper cover fascia shell only. Backup radar sensors, sensor brackets or retainers, reflectors, lower garnish or valance pieces, reinforcement components, mounting hardware, and other surrounding rear bumper parts are not included unless specifically stated in the package contents.

Finish & Installation

The bumper cover is supplied in a primed black, unpainted finish intended for professional refinishing. Test-fit the part before painting to confirm sensor-hole positioning, surrounding component alignment, and mounting-point fitment. Proper surface preparation, color matching, painting, and professional installation are recommended.

Packaging & Shape Recovery

Rear bumper covers are large and flexible exterior panels, so minor temporary flexing may occur during packaging or transportation. After unpacking, allow the bumper cover to rest at room temperature and return to its natural contour before test-fitting, preparation, or painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and RAV4® are registered trademarks of Toyota Motor Corporation. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, sensor configuration, and existing components before purchase.

Product Description

This Front Bumper Bracket Left Driver Side Support Retainer Mounting Spacer is designed for 2016-2021 Honda Civic 4-Door Sedan (10th Gen Framework) and installs at the left-hand driver-side front bumper and fender edge mounting area. This support guide retainer helps secure and position the front bumper cover along the driver-side fender edge. It is suitable for replacing a bracket that is cracked, broken, loose, missing, or damaged during bumper removal, collision repair, or other front-end repair work. This listing includes the Left Driver Side (LH) single component only – HO1042134 / OEM: 71198-TBA-A01 Core Spec.

Interchange Part Numbers

Please compare the component and reference numbers below with your existing part before ordering.

Key Features

• Left Driver Side (LH) front bumper support retainer bracket

• Helps support and guide the front bumper cover along the fender edge

• Integrated retention points for the corresponding mounting location

• Suitable for replacing cracked, broken, loose, damaged, or missing retainers

• Useful for bumper replacement, collision repair, and front-end restoration

• Single-component replacement for the corresponding LH mounting position

Technical Fitment Notes

This front bumper support retainer guide bracket is intended specifically for the 2016-2021 10th Gen Honda Civic 4-Door Sedan configuration. The molded bracket profile, snap-in retention points, and mounting locations are designed to correspond with the left-hand driver-side fender edge and front bumper corner mounting area, helping maintain proper positioning and support of the bumper cover. Important: This component is intended for the 2016-2021 10th Gen framework and should not be treated as interchangeable with the earlier 2012-2015 9th Gen configuration. The earlier generation uses a different mounting and structural anchor layout. When matched to the correct vehicle application and mounting configuration, this bracket is designed as a direct replacement-style component without requiring cutting, drilling, or trimming.

Package Includes

• 1 × Front Bumper Left Driver Side Support Retainer Mounting Spacer

Total: 1 Piece – Left Driver Side (LH) Only

Important Component Notice

This listing includes only the component specifically stated in the Package Includes section. The right-side bracket and any additional hardware, fasteners, clips, screws, trim pieces, brackets, accessories, or surrounding components that are not specifically listed are not included. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the product description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original bracket, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the Left Driver Side (LH) component only. Please confirm the installation side, vehicle year, 10th Gen configuration, 4-door sedan body style, existing mounting layout, and reference numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Honda Motor Co., Ltd. or American Honda Motor Co., Inc. Honda® and Civic® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, body style, trim level, production configuration, mounting points, installation side, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.