Accessories

Product Overview

This aftermarket front bumper cover is configured for 2019–2021 Toyota RAV4 Limited pre-facelift models equipped with two front parking radar sensor holes. Manufactured from durable automotive-grade impact-resistant plastic, the fascia is supplied in a primed black finish for professional preparation and refinishing. The pre-molded dual-sensor layout is intended to match the corresponding Limited-trim front bumper configuration, making it suitable for collision repair, cosmetic restoration, or replacement of a damaged original fascia.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

Radar & Fitment Verification

This bumper cover is intended specifically for 2019–2021 Toyota RAV4 Limited pre-facelift configurations with two pre-molded front parking radar sensor holes. Before purchase, compare the sensor-hole count and placement, grille openings, lower fascia profile, side openings, mounting points, and reference numbers with your original bumper. Non-sensor versions or other trim configurations may use a different front fascia.

Components Not Included

This listing includes the front bumper cover fascia shell only. Parking radar sensors, sensor retainers or brackets, grille components, side bezels or inserts, reinforcement parts, lighting components, emblems, mounting hardware, and other surrounding bumper accessories are not included unless specifically stated in the package contents.

Finish & Installation

The bumper cover is supplied with a primed black surface intended for professional painting and refinishing. Test-fit the fascia before paintwork to confirm sensor-hole positioning, grille alignment, and mounting-point fitment. Proper surface preparation, color matching, refinishing, and professional installation are recommended.

Packaging & Handling

Because front bumper fascia panels are large and flexible, minor temporary flexing may occur during packaging or transportation. After unpacking, allow the bumper cover to rest at room temperature and return to its natural contour before test-fitting or beginning paint preparation.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and RAV4® are registered trademarks of Toyota Motor Corporation. Vehicle names, trademarks, OEM numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, sensor configuration, and existing components before purchase.

Product Description

This Rear Bumper Bracket Right Passenger Side Support Retainer Mounting Spacer is designed for 2018-2020 Honda Accord (10th Gen Pre-Facelift Sedan All Trims Sport, EX, LX) and installs at the right-hand passenger-side rear bumper and fender-side mounting area. This support guide retainer plate helps secure and position the rear bumper cover along the passenger-side outer corner. It is suitable for replacing a bracket that is cracked, broken, loose, missing, or damaged during bumper removal, collision repair, or other rear-end repair work. This listing includes the Right Passenger Side (RH) single component only – HO1143118 / OEM: 71593-TVA-A01 Core Spec.

Interchange Part Numbers

Please compare the component and reference numbers below with your existing part before ordering.

Key Features

• Right Passenger Side (RH) rear bumper support retainer bracket

• Helps support and guide the rear bumper cover along the fender-side corner

• Integrated retention points for the corresponding mounting location

• Suitable for replacing cracked, broken, loose, damaged, or missing retainers

• Useful for bumper replacement, collision repair, and rear-end restoration

• Single-component replacement for the corresponding RH mounting position

Technical Fitment Notes

This rear bumper support retainer guide plate is intended specifically for the 2018-2020 pre-facelift 10th Gen Honda Accord configuration. The molded bracket profile, snap-in retention points, and mounting locations are designed to correspond with the right-hand passenger-side rear bumper and fender-side corner mounting area, helping maintain proper positioning and support of the rear bumper cover. Important: This component is intended for the 2018-2020 pre-facelift configuration and should not be treated as interchangeable with the 2021-2022 post-facelift configuration. The later models use a different rear bumper side mounting and anchor layout. When matched to the correct vehicle application and mounting configuration, this bracket is designed as a direct replacement-style component without requiring cutting, drilling, or trimming.

Package Includes

• 1 × Rear Bumper Right Passenger Side Support Retainer Mounting Spacer

Total: 1 Piece – Right Passenger Side (RH) Only

Important Component Notice

This listing includes only the component specifically stated in the Package Includes section. The left-side bracket and any additional hardware, fasteners, clips, screws, trim pieces, brackets, accessories, or surrounding components that are not specifically listed are not included. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the product description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original bracket, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the Right Passenger Side (RH) component only. Please confirm the installation side, vehicle year, pre-facelift configuration, existing rear bumper mounting layout, and reference numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Honda Motor Co., Ltd. or American Honda Motor Co., Inc. Honda® and Accord® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, mounting points, installation side, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Overview

Restore the rear bodywork of your 2019–2021 Toyota RAV4 LE or XLE with this aftermarket bumper cover, configured for pre-facelift models without factory sensor holes. The fascia is formed from durable automotive-grade impact-resistant plastic and supplied in a primed black finish for professional paint preparation and color matching. It provides a clean replacement option when the original rear bumper has suffered cracks, scrapes, deformation, collision damage, or previous repair work.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

Vehicle & Sensor Check

This rear bumper cover is intended for 2019–2021 Toyota RAV4 LE & XLE pre-facelift models without parking sensor holes. Check the original bumper’s sensor layout, reflector locations, lower contour, attachment points, and reference numbers before purchase. Versions equipped with factory sensors or a different trim-specific rear fascia may require another bumper configuration.

Accessories Not Included

Only the rear bumper cover fascia shell is included. Reflectors, lower valance or garnish pieces, parking sensors, sensor brackets, retainers, reinforcement components, installation hardware, and surrounding rear bumper accessories are not included unless specifically stated in the package contents.

Finish & Installation

The primed black surface is preparation-ready and requires final refinishing before installation. Test-fit the bumper first, then complete any necessary surface preparation, paint matching, and final coating. Professional installation is recommended to ensure proper fit around the quarter panels, reflectors, and mounting locations.

Delivery & Shape Recovery

The flexible construction of an automotive bumper fascia may allow minor temporary movement in shape during packaging and transportation. Once unpacked, leave the bumper at room temperature until it returns to its natural contour before beginning fitment checks or paint preparation.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and RAV4® are registered trademarks of Toyota Motor Corporation. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, sensor configuration, and existing components before purchase.

Product Description

This Rear Bumper Bracket Left Driver Side Support Retainer Mounting Spacer is designed for 2018-2020 Honda Accord (10th Gen Pre-Facelift Sedan All Trims Sport, EX, LX) and installs at the left-hand driver-side rear bumper and fender-side mounting area. This support guide retainer plate helps secure and position the rear bumper cover along the driver-side outer corner. It is suitable for replacing a bracket that is cracked, broken, loose, missing, or damaged during bumper removal, collision repair, or other rear-end repair work. This listing includes the Left Driver Side (LH) single component only – HO1142118 / OEM: 71598-TVA-A01 Core Spec.

Interchange Part Numbers

Please compare the component and reference numbers below with your existing part before ordering.

Key Features

• Left Driver Side (LH) rear bumper support retainer bracket

• Helps support and guide the rear bumper cover along the fender-side corner

• Integrated retention points for the corresponding mounting location

• Suitable for replacing cracked, broken, loose, damaged, or missing retainers

• Useful for bumper replacement, collision repair, and rear-end restoration

• Single-component replacement for the corresponding LH mounting position

Technical Fitment Notes

This rear bumper support retainer guide plate is intended specifically for the 2018-2020 pre-facelift 10th Gen Honda Accord configuration. The molded bracket profile, retention points, and mounting locations are designed to correspond with the left-hand driver-side rear bumper and fender-side corner mounting area, helping maintain proper positioning and support of the rear bumper cover. Important: This component is intended for the 2018-2020 pre-facelift configuration and should not be treated as interchangeable with the 2021-2022 post-facelift configuration. The later models use a different rear bumper side mounting and anchor layout. When matched to the correct vehicle application and mounting configuration, this bracket is designed as a direct replacement-style component without requiring cutting, drilling, or trimming.

Package Includes

• 1 × Rear Bumper Left Driver Side Support Retainer Mounting Spacer

Total: 1 Piece – Left Driver Side (LH) Only

Important Component Notice

This listing includes only the component specifically stated in the Package Includes section. The right-side bracket and any additional hardware, fasteners, clips, screws, trim pieces, brackets, accessories, or surrounding components that are not specifically listed are not included. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the product description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original bracket, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the Left Driver Side (LH) component only. Please confirm the installation side, vehicle year, pre-facelift configuration, existing rear bumper mounting layout, and reference numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Honda Motor Co., Ltd. or American Honda Motor Co., Inc. Honda® and Accord® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, mounting points, installation side, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Overview

This aftermarket front bumper cover is made for 2019–2021 Toyota RAV4 LE & XLE pre-facelift models without front sensor holes, providing the correct standard-trim fascia configuration for repair or replacement work. Manufactured from durable automotive-grade impact-resistant plastic, the bumper arrives in a primed black finish ready for professional surface preparation and painting. It is a suitable replacement for original fascia panels affected by collision damage, cracks, deep scratches, deformation, or previous repair work.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

Fitment & Sensor Configuration

This bumper cover is intended for 2019-2021 Toyota RAV4 LE & XLE pre-facelift configurations without pre-molded sensor holes. Before ordering, compare your original bumper’s sensor-hole layout, grille openings, side openings, overall contour, mounting locations, and reference numbers. Sensor-equipped or other trim-specific fascia designs may require a different bumper cover.

Components Sold Separately

This listing includes the front bumper cover fascia shell only. Grille assemblies, side bezels or inserts, sensor components, brackets, retainers, reinforcement parts, lighting components, emblems, mounting hardware, and other surrounding bumper parts are not included unless specifically listed in the package contents.

Paint Preparation & Installation

The supplied primed black surface is intended for professional refinishing and is not a final exterior paint finish. Test-fit the bumper before painting to confirm proper alignment with surrounding panels, grille openings, and mounting locations. Final surface preparation, color matching, painting, and professional installation are recommended.

Packaging & Handling

Front bumper covers are flexible exterior body panels and may experience minor temporary flexing while packaged or transported. After unpacking, allow the bumper to rest at room temperature and regain its normal contour before test-fitting or beginning refinishing work.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and RAV4® are registered trademarks of Toyota Motor Corporation. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, sensor configuration, and existing components before purchase.

Product Overview

Designed for 2016–2018 Toyota RAV4 Limited post-facelift models equipped with four rear backup radar sensor holes, this aftermarket rear bumper cover provides the correct premium-trim fascia layout for collision repair or exterior restoration. Molded from durable automotive-grade impact-resistant plastic, the cover is supplied in a primed black finish for professional preparation and painting. The factory-style sensor-hole layout helps simplify reuse or transfer of the corresponding rear parking-assist components when the original bumper has been cracked, scraped, deformed, or impact damaged.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

Sensor & Fitment Verification

This bumper cover is intended specifically for 2016–2018 Toyota RAV4 Limited post-facelift configurations with four pre-molded rear sensor holes. Before ordering, compare the sensor-hole count and placement, reflector areas, lower bumper contour, mounting points, and reference numbers with your existing part. Non-sensor versions or other trim layouts may require a different rear fascia.

Parts Not Included

This listing includes the rear bumper cover shell only. Parking sensors, sensor retainers or brackets, reflectors, lower garnish or valance components, reinforcement parts, mounting hardware, and other surrounding rear bumper components are not included unless specifically listed in the package contents.

Refinishing & Installation

The bumper cover arrives in a primed black, unpainted finish intended for professional refinishing. Test-fit the part before painting to verify the sensor locations, surrounding component alignment, and mounting points. Final surface preparation, color matching, painting, and professional installation are recommended.

Packaging & Handling

Because rear bumper covers are large and flexible, minor temporary flexing can occur during packaging and transportation. After unpacking, allow the panel to rest at room temperature and recover its normal shape before test-fitting or beginning paint preparation.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and RAV4® are registered trademarks of Toyota Motor Corporation. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, sensor configuration, and existing components before purchase.

Product Overview

This aftermarket rear bumper cover is tailored for 2016–2018 Toyota RAV4 LE & XLE post-facelift models without factory parking sensor holes. Built from durable automotive-grade impact-resistant plastic, the fascia comes in a primed black finish for professional prep and repainting. It is a practical choice for replacing a rear bumper cover with cracks, scrapes, impact damage, deformation, or previous repair work while preserving the standard LE/XLE rear bumper profile.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

Fitment Verification

This version is intended for 2016–2018 Toyota RAV4 LE & XLE post-facelift configurations without parking sensor holes. Before purchase, compare the rear bumper contour, reflector positions, lower openings, mounting locations, sensor-hole layout, and reference numbers with your original part. Sensor-equipped or trim-specific rear bumper designs may require a different fascia.

Components Not Included

This listing includes the rear bumper cover shell only. Reflectors, lower garnish or valance pieces, parking sensors, brackets, retainers, reinforcement components, mounting hardware, and other surrounding rear bumper parts are not included unless specifically listed in the package contents.

Refinishing & Installation

The bumper cover is supplied in a primed black, unpainted finish and requires final surface preparation, color matching, and painting before installation. Test-fitting before paintwork is strongly recommended. Professional body-shop preparation and installation are recommended to help ensure proper alignment and finish quality.

Packaging & Shape Recovery

Rear bumper covers are large, flexible exterior panels and may show minor temporary flexing during packaging or transit. After unpacking, allow the part to rest at room temperature and recover its normal contour before test-fitting, preparation, or painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and RAV4® are registered trademarks of Toyota Motor Corporation. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, sensor configuration, and existing components before purchase.

Product Overview

Built for the 2016–2018 Toyota RAV4 LE & XLE post-facelift front bumper layout, this aftermarket bumper cover provides a clean replacement option for vehicles with cracked, scraped, impact-damaged, or previously repaired front fascia panels. The shell is manufactured from durable automotive-grade impact-resistant plastic and comes in a primed black finish for professional preparation and repainting. Its trim-specific contour is designed to match the standard LE/XLE front-end configuration while providing a solid foundation for collision repair or cosmetic restoration.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

Application Check

This bumper cover is intended for 2016–2018 Toyota RAV4 LE & XLE post-facelift configurations. Before ordering, compare the overall bumper profile, grille openings, side insert areas, mounting points, and reference numbers with your original part. Limited or other trim-specific front bumper layouts may use a different fascia design.

Parts Not Included

This listing includes the front bumper cover shell only. Grilles, side bezels or inserts, brackets, retainers, reinforcement components, lighting parts, sensors, emblems, mounting hardware, and other surrounding front bumper components are not included unless specifically stated in the package contents.

Paint Preparation & Installation

The bumper cover is supplied in a primed black, unpainted finish intended for professional refinishing. Test-fit the fascia before painting to verify alignment with the surrounding panels and mounting locations. Final surface preparation, color matching, painting, and professional installation are recommended for the best finished result.

Packaging & Handling

Because bumper covers are large and flexible exterior panels, minor temporary flexing may occur during packaging or transportation. After unpacking, allow the part to rest at room temperature and return to its normal contour before test-fitting or beginning refinishing work.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and RAV4® are registered trademarks of Toyota Motor Corporation. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, and existing components before purchase.

Product Overview

Designed for 2013–2015 Toyota RAV4 Limited pre-facelift models, this aftermarket front bumper cover features the pre-molded cruise radar sensor opening required for the corresponding flagship trim configuration. The fascia is molded from durable automotive-grade impact-resistant plastic and supplied in a primed black finish for professional surface preparation and repainting. It provides a clean replacement option for front bumper covers affected by collision damage, cracks, deep scrapes, deformation, or prior repair work.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

Fitment & Radar Configuration

This bumper cover is intended specifically for 2013–2015 Toyota RAV4 Limited pre-facelift configurations with the corresponding cruise radar sensor opening. Before purchase, compare the radar opening, grille layout, side openings, bumper contour, mounting points, and reference numbers with your original part. LE, XLE, or non-radar bumper layouts may use a different fascia design.

Parts Sold Separately

This listing includes the front bumper cover fascia shell only. Radar sensor hardware, radar brackets, grilles, bezels, trim pieces, reinforcement components, retainers, lighting parts, emblems, and mounting hardware are not included unless specifically listed in the package contents.

Refinishing & Installation

The bumper cover arrives with a primed black surface intended for professional refinishing and should not be considered a final exterior paint finish. Test-fit the bumper before painting to confirm the radar opening, surrounding component alignment, and mounting locations. Professional surface preparation, color matching, painting, and installation are recommended.

Shipping & Handling

As a large flexible exterior body panel, the bumper cover may experience minor temporary flexing during packaging or transit. Allow the part to rest at room temperature and recover its natural contour before test-fitting, preparation, or painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and RAV4® are registered trademarks of Toyota Motor Corporation. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, radar configuration, and existing components before purchase.

Product Overview

This rear bumper cover replacement is designed for 2013–2015 Toyota RAV4 LE & XLE pre-facelift models without parking sensor holes. Formed from durable automotive-grade impact-resistant plastic, the bumper cover is supplied in a primed black finish for professional prep and repainting. Its standard rear fascia layout is intended to replace an original bumper cover that has been cracked, scraped, dented, collision-damaged, or previously repaired.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

Fitment Notes

This version is intended for 2013–2015 Toyota RAV4 LE & XLE standard rear bumper configurations without factory parking sensor holes. Before ordering, inspect your original bumper for sensor-hole layout, reflector positions, lower openings, mounting locations, and overall fascia shape. A sensor-equipped bumper or a different trim layout may require another version.

Parts Not Included

The listing includes the rear bumper cover shell only. Reflectors, lower valance or garnish pieces, parking sensors, brackets, retainers, reinforcement components, mounting hardware, and other surrounding rear bumper parts are not included unless specifically stated in the package contents.

Paint Preparation & Installation

The supplied primed black surface is intended for refinishing and is not the vehicle’s final exterior color. Test-fit the bumper before paintwork. Final sanding or preparation, color matching, painting, and professional installation are recommended to help achieve proper alignment and a clean finished appearance.

Shipping & Handling

Due to the size and flexible nature of bumper fascia panels, minor temporary flexing may occur while the part is packaged and transported. After unpacking, allow the bumper cover to rest at room temperature and return to its normal shape before test-fitting or refinishing.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and RAV4® are registered trademarks of Toyota Motor Corporation. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, sensor configuration, and existing components before purchase.

Product Overview

Designed as a replacement for the standard LE & mid-trim XLE front bumper configuration, this aftermarket bumper cover offers a clean solution for repairing accident damage, deep scratches, cracks, or deterioration to the original fascia. The shell is formed from durable automotive-grade impact-resistant plastic and supplied with a primed black surface, allowing the body shop or installer to complete final preparation and paint matching for the vehicle. Its trim-specific profile is intended to retain the correct bumper contour and surrounding component layout.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

Application Verification

Fitment should be confirmed against the vehicle’s trim level, original bumper profile, grille openings, side openings, mounting locations, and reference numbers before purchase. This version is intended for the corresponding LE & XLE standard-style front bumper layout. Other trim packages may use a different fascia design even when the vehicle body appears similar.

Items Sold Separately

Only the front bumper cover fascia shell is included with this listing. Grilles, bumper inserts, side bezels, brackets, retainers, reinforcement parts, lighting components, sensors, emblems, and mounting hardware are sold separately unless specifically identified as included.

Surface Preparation & Installation

The primed black finish is a preparation surface, not the final vehicle color. Test-fit the bumper before refinishing to confirm alignment with the surrounding panels and attachment points. Final sanding or surface preparation, paint matching, and professional refinishing are required prior to installation. Body-shop installation is recommended for the best fit and finished appearance.

Handling After Delivery

Automotive bumper covers are flexible by design. Temporary movement or slight distortion can occur while the panel is packaged and transported. Once unpacked, allow the bumper cover to rest at room temperature and regain its normal contour before test-fitting or beginning paint preparation.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and related vehicle trademarks are the property of Toyota Motor Corporation. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, and existing components before purchase.

Product Overview

Replace a damaged or worn rear fascia with this aftermarket rear bumper cover, engineered for 2020–2022 Toyota Corolla SE & XSE pre-facelift models. Designed around the more aggressive SE/XSE rear profile, this bumper cover is molded from durable automotive-grade impact-resistant plastic and supplied in a primed black finish for professional prep and painting. It is well suited for collision repair, cosmetic restoration, or replacing a factory bumper cover with cracks, scrapes, deformation, or prior repair damage.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

Fitment Verification

This rear bumper cover is designed specifically for 2020–2022 Toyota Corolla SE & XSE pre-facelift configurations. Before ordering, compare the overall bumper contour, lower rear openings, reflector positions, mounting points, and reference numbers with the original part on your vehicle. Standard-trim Corolla rear bumper designs may differ from the SE/XSE configuration.

Parts Not Included

This listing is for the rear bumper cover fascia shell only. Lower valance or diffuser-style trim, reflectors, brackets, retainers, reinforcement components, sensors, mounting hardware, and other surrounding rear bumper parts are not included unless specifically stated in the package contents.

Paint & Installation

The bumper cover is supplied in a primed black, unpainted finish and is intended to be professionally refinished to match the vehicle.  Test-fitting before paintwork is strongly recommended. Proper surface preparation, color matching, and professional installation help ensure accurate alignment and a clean finished appearance.

Shipping & Shape Recovery

As a large flexible exterior panel, the bumper cover may experience minor temporary flexing during transit. After unpacking, allow the part to rest at room temperature and recover its natural shape before test-fitting, preparation, or painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Corolla® are registered trademarks of Toyota Motor Corporation. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, and existing components before purchase.

Product Overview

Bring the front of your Corolla back to a clean, sport-oriented appearance with this aftermarket front bumper cover, developed for 2020–2022 Toyota Corolla SE & XSE pre-facelift models. Manufactured from durable automotive-grade impact-resistant plastic, the fascia is supplied in a primed black finish for professional prep and painting. Its SE/XSE-specific design makes it a strong replacement choice for collision damage, cosmetic wear, or previously repaired bumper covers that no longer align or present properly.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

Confirm Fitment Before Purchase

This bumper cover is intended specifically for 2020–2022 Toyota Corolla SE & XSE pre-facelift configurations. Before ordering, compare your original bumper’s overall contour, grille openings, side bezel areas, mounting tabs, and reference numbers. SE/XSE bumper layouts differ from standard-trim Corolla configurations.

Components Not Included

This listing includes the front bumper cover shell only. Upper and lower grilles, side bezels or inserts, brackets, retainers, reinforcement components, lighting parts, sensors, emblems, mounting hardware, and other surrounding bumper components are not included unless specifically listed in the package contents.

Refinishing & Installation

The bumper is supplied in a primed black, unpainted finish intended for professional refinishing. Test-fit the fascia before painting, then complete the necessary surface preparation, color matching, and final paintwork. Professional installation is recommended to help ensure proper panel alignment and fit.

Packaging Note

Because bumper covers are large and flexible, minor temporary flexing may occur during transportation. After unpacking, allow the fascia to rest at room temperature and recover its natural shape before test-fitting or refinishing.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Corolla® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, and existing components before purchase.

Product Overview

Replace a worn or damaged rear fascia with this aftermarket rear bumper cover, developed for 2020–2022 Toyota Corolla L, LE, XLE & Hybrid pre-facelift configurations. Molded from durable automotive-grade impact-resistant plastic, the bumper cover is supplied in a primed black finish for professional preparation and color matching. Its trim-specific rear profile makes it a suitable replacement for collision repairs, cosmetic restoration, or heavily damaged original bumper covers.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

Verify Your Application

This rear bumper cover is intended for 2020–2022 Toyota Corolla L, LE, XLE & Hybrid pre-facelift models. Before ordering, compare the rear bumper profile, lower openings, reflector positions, mounting areas, and reference numbers with the original part on your vehicle. Different trim configurations may use different rear fascia designs.

Components Not Included

This listing is for the rear bumper cover shell only. Reflectors, lower valance or garnish pieces, brackets, retainers, reinforcement components, sensors, mounting hardware, and other surrounding rear bumper parts are not included unless specifically identified in the package contents.

Refinishing & Installation

The primed black surface is intended for refinishing and is not a final exterior paint finish. Test-fit the bumper before painting, then complete the required surface preparation, color matching, and refinishing. Professional body-shop installation is recommended, particularly when surrounding mounting points have previous collision damage.

Packaging & Shape Recovery

Rear bumper covers are large, flexible exterior panels and may experience minor temporary flexing during transportation. After unpacking, allow the bumper cover to rest at room temperature and return to its natural shape before test-fitting, preparation, or painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Corolla® are registered trademarks of Toyota Motor Corporation. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, and existing components before purchase.

Product Overview

Bring the front of your 2020–2022 Toyota Corolla L, LE, or XLE back to a clean, repair-ready condition with this aftermarket bumper cover fascia. Designed around the pre-facelift standard-trim front bumper layout, the shell is manufactured from durable automotive-grade plastic and supplied in a primed black finish for professional refinishing. It is well suited for collision repairs, cosmetic replacement, or vehicles with cracked, scraped, or heavily worn original bumper covers.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

Confirm Fitment Before Ordering

This bumper cover is intended for 2020–2022 Toyota Corolla L, LE & XLE pre-facelift configurations. Before purchase, compare your original bumper’s overall profile, grille openings, side openings, mounting tabs, and reference numbers. Trim-specific bumper layouts may differ even within the same model year.

Components Sold Separately

This listing is for the bumper cover shell only.  Grilles, side bezels or inserts, brackets, retainers, reinforcement bars, lighting components, sensors, emblems, and installation hardware are not included unless specifically identified as part of the package.

Refinishing & Installation

The supplied primed black surface is not a final exterior finish. The bumper should be test-fitted before painting, followed by proper surface preparation, color matching, and refinishing. Professional installation is recommended, particularly when the vehicle has prior collision damage or surrounding mounting points require adjustment or replacement.

Packaging Note

Large automotive fascia panels are naturally flexible and may show temporary movement in shape during transportation. After unpacking, place the bumper in a suitable indoor environment and allow it to settle into its normal form before test-fitting or refinishing.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Corolla® are registered trademarks of Toyota Motor Corporation. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, and existing components before purchase.

Product Overview

Refresh the rear appearance of your Corolla with this aftermarket rear bumper cover replacement, designed specifically for 2017–2019 Toyota Corolla SE & XSE facelift models. Made from durable automotive-grade impact-resistant plastic, this rear fascia shell comes in a primed black finish for professional preparation and painting. It is a practical solution for replacing a cracked, scraped, impact-damaged, or previously repaired factory bumper cover while maintaining the sportier SE/XSE rear-end styling.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

Fitment Check Before Purchase

Please confirm your vehicle year, SE/XSE trim configuration, rear bumper profile, lower openings, reflector locations, mounting points, and reference numbers before ordering. This bumper cover is designed specifically for 2017–2019 Toyota Corolla SE & XSE facelift configurations and is not intended for LE, XLE, or other rear bumper layouts.

What’s Not Included

This listing includes the rear bumper cover fascia shell only. Lower valance or garnish components, reflectors, brackets, retainers, reinforcement components, mounting hardware, and other surrounding rear bumper accessories are not included unless specifically listed in the package contents.

Paint & Installation Notice

The bumper cover is supplied in a primed black, unpainted finish and requires final surface preparation, paint matching, and refinishing before installation. Test-fitting before painting is strongly recommended. Professional body-shop preparation and installation are recommended to help ensure proper alignment and finish quality.

Shipping & Packaging Note

Because automotive bumper covers are large and flexible, minor temporary flexing may occur during transportation. After unpacking, allow the bumper cover to rest at room temperature and recover its natural shape before test-fitting, preparation, or painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Corolla® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Upgrade the front appearance of your Corolla with this aftermarket front bumper cover, designed for 2017–2019 Toyota Corolla SE & XSE facelift models. Made from durable automotive-grade impact-resistant plastic, this fascia shell comes in a primed black finish for professional preparation and painting. It is well suited for replacing a cracked, scraped, collision-damaged, or previously repaired factory bumper cover while preserving the sharper SE/XSE front-end styling.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

Fitment Check Before Purchase

Please confirm your vehicle year, SE/XSE trim configuration, bumper profile, grille and bezel openings, mounting locations, and reference numbers before ordering. This bumper cover is designed specifically for 2017–2019 Toyota Corolla SE & XSE facelift configurations and is not intended for LE, XLE, or other bumper layouts.

What’s Not Included

This listing includes the front bumper cover fascia shell only. Upper and lower grille components, side inserts or bezels, brackets, retainers, reinforcement components, lighting parts, mounting hardware, and other surrounding front bumper accessories are not included unless specifically listed in the package contents.

Paint & Installation Notice

The bumper cover is supplied in a primed black, unpainted finish and requires final surface preparation, paint matching, and refinishing before installation. Test-fitting before painting is strongly recommended. Professional body-shop preparation and installation are recommended to help ensure proper alignment and finish quality.

Shipping & Packaging Note

Because automotive bumper covers are large and flexible, minor temporary flexing may occur during transportation.  After unpacking, allow the bumper cover to rest at room temperature and recover its natural shape before test-fitting, preparation, or painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Corolla® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Give your Corolla’s rear end a clean, factory-style refresh with this aftermarket rear bumper cover, developed for 2017–2019 Toyota Corolla LE & XLE trim configurations. Made from durable automotive-grade impact-resistant plastic, this 1-piece fascia shell is supplied in a primed black finish for professional prep and painting. It is a practical replacement for bumper covers affected by cracks, scrapes, impact damage, or previous body repair.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

Fitment Check Before Purchase

Confirm your vehicle year, trim level, bumper profile, mounting locations, and reference numbers before ordering.This rear bumper cover is intended for 2017–2019 Toyota Corolla LE & XLE configurations. Compare the lower openings, reflector areas, and mounting points with your original bumper to help confirm the correct application.

What’s Not Included

This listing is for the rear bumper cover shell only. Reflectors, lower garnish or valance pieces, brackets, retainers, reinforcement components, mounting hardware, and other surrounding rear bumper parts are not included unless specifically listed in the package contents.

Paint & Installation Notice

The bumper cover is supplied in a primed black, unpainted finish and requires final surface preparation, paint matching, and refinishing before installation. Test-fitting before painting is strongly recommended. Professional body-shop preparation and installation are also recommended to help ensure proper alignment and finish quality.

Shipping & Packaging Note

Because bumper covers are large and flexible, minor temporary flexing may occur during transportation. After unpacking, allow the bumper cover to rest at room temperature and recover its natural shape before test-fitting or refinishing.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Corolla® are registered trademarks of Toyota Motor Corporation. Vehicle names, trademarks, OEM numbers, Partslink numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Refresh the front appearance of your Toyota Corolla with this direct-fit aftermarket bumper cover, engineered for LE & XLE trim configurations. Built from durable automotive-grade impact-resistant plastic, this 1-piece fascia shell comes in a primed black finish and is ready for professional surface preparation and painting. It offers a clean replacement solution for worn, cracked, scraped, or collision-damaged factory bumper covers while maintaining the vehicle’s original front-end styling.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

Before You Order

Please verify your vehicle year, trim configuration, front bumper design, and reference numbers before purchasing. Compare the bumper shape, grille and bezel openings, mounting points, and reference numbers with your existing part to confirm compatibility. Designed specifically for Toyota Corolla LE & XLE bumper configurations. Not intended for other bumper or trim configurations.

What’s Not Included

This listing includes the front bumper cover fascia shell only. Upper and lower grille components, side inserts or bezels, brackets, retainers, reinforcement components, lighting parts, and mounting hardware are not included unless specifically stated in the package contents.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Corolla® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, interchange numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore your Toyota Corolla’s rear exterior appearance with this aftermarket rear bumper cover replacement, designed specifically for 2014–2016 Toyota Corolla S & Special Edition pre-facelift trims. Constructed from durable automotive-grade impact-resistant plastic, this rear bumper fascia shell features a primed black finish and is ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

Before You Order

Please verify your vehicle year, trim configuration, rear bumper design, and reference numbers before purchasing. Compare the bumper shape, lower openings, reflector locations, mounting points, and reference numbers with your existing part to confirm compatibility. Designed specifically for 2014–2016 Toyota Corolla S & Special Edition pre-facelift trims. Not intended for L, LE, LE Eco, or other bumper configurations.

What’s Not Included

This listing includes the rear bumper cover fascia shell only. Lower valance or garnish components, reflectors, brackets, retainers, reinforcement components, and mounting hardware are not included unless specifically stated in the package contents.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Corolla® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, interchange numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore your Toyota Corolla’s front-end appearance with this aftermarket front bumper cover replacement, designed specifically for 2014–2016 Toyota Corolla S & Special Edition pre-facelift trims. Constructed from durable automotive-grade impact-resistant plastic, this front bumper fascia shell features a primed black finish and is ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

Before You Order

Please verify your vehicle year, trim configuration, front bumper design, and reference numbers before purchasing. Compare the bumper shape, grille and bezel openings, mounting points, and reference numbers with your existing part to confirm compatibility. Designed specifically for 2014–2016 Toyota Corolla S & Special Edition pre-facelift trims. Not intended for L, LE, LE Eco, or other bumper configurations.

What’s Not Included

This listing includes the front bumper cover fascia shell only. Upper and lower grille components, side inserts or bezels, brackets, retainers, reinforcement components, lighting parts, and mounting hardware are not included unless specifically stated in the package contents.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Corolla® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, interchange numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore your Toyota Corolla’s rear exterior appearance with this aftermarket rear bumper cover replacement, designed specifically for 2014–2016 Toyota Corolla L, LE, and LE Eco pre-facelift trims. Constructed from durable automotive-grade impact-resistant plastic, this rear bumper fascia shell features a primed black finish and is ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

Before You Order

Please verify your vehicle year, trim configuration, rear bumper design, and reference numbers before purchasing. Compare the bumper shape, lower openings, reflector locations, mounting points, and reference numbers with your existing part to confirm compatibility. Designed specifically for 2014–2016 Toyota Corolla L, LE, and LE Eco pre-facelift trims. Not intended for other bumper or trim configurations.

What’s Not Included

This listing includes the rear bumper cover fascia shell only. Lower valance or garnish components, reflectors, brackets, retainers, reinforcement components, and mounting hardware are not included unless specifically stated in the package contents.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Corolla® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, interchange numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore your Toyota Corolla’s front-end appearance with this aftermarket front bumper cover replacement, designed specifically for 2014–2016 Toyota Corolla L, LE & LE Eco pre-facelift models. Constructed from durable automotive-grade impact-resistant plastic, this front bumper fascia shell features a primed black finish and is ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover. Suitable for collision repair, cosmetic restoration, and body shop replacement applications, this standalone fascia shell provides a clean foundation for professional refinishing and installation.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

Before You Order

Please verify your vehicle year, trim configuration, front bumper design, and reference numbers before purchasing. Compare the bumper shape, grille and bezel openings, mounting points, and reference numbers with your existing part to confirm compatibility. Designed specifically for 2014–2016 Toyota Corolla L, LE & LE Eco pre-facelift models. Not intended for other bumper or trim configurations.

What’s Not Included

This listing includes the front bumper cover fascia shell only. Upper and lower grille components, side inserts or bezels, trim moldings, brackets, retainers, reinforcement components, lighting parts, and mounting hardware are not included unless specifically stated in the package contents.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Corolla® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, interchange numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore major rear-end components with this 8-Piece Rear Bumper Restoration Bundle Kit, designed as an OE-style aftermarket solution for post-facelift Honda Civic Sedan applications. This coordinated package combines the rear bumper fascia with structural reinforcement, trunk garnish, lower valance, side mounting retainers, and rear corner bezel components for collision repair and rear-end restoration.

Package Includes

Product Highlights

• Complete rear-end restoration package

• Includes exterior, mounting, and structural bumper components

• OE-style contours and compatible mounting locations

• Designed for collision repair and rear-end rebuilding

Important Component Notice

Only the components specifically listed in the Package Includes table are included. Rear reflector lamps, parking sensors, sensor brackets, wiring, mounting clips, fasteners, and additional trim components are NOT included unless specifically stated. Compatible original components may be reused where applicable.

Paint & Installation Notice

The rear bumper cover is supplied primed and unpainted and requires professional surface preparation, color matching, and final paint before installation. Always test fit all components before painting, drilling, cutting, or permanent modification to verify alignment and mounting locations. Because this package includes a structural reinforcement beam and multiple mounting components, professional installation is recommended. Previous collision damage, distorted mounting points, worn retainers, or body alignment issues should be inspected and corrected before installation. Painted, installed, drilled, cut, damaged, or permanently modified products may not qualify for return under the VELNOX Auto Return Policy.

Folded Shipping & Unboxing Notice

Because of its flexible construction, the rear bumper cover may be professionally folded and securely packed inside a reinforced shipping carton to help reduce oversized-carrier shipping costs. Temporary bends, waves, creases, or packaging impressions may appear after unpacking and do not necessarily indicate permanent damage.

After unpacking:

1. Remove all protective packaging.

2. Place the bumper cover in a warm, clean area.

3. Allow sufficient time for the panel to recover its molded shape.

4. Apply low, controlled heat gradually and evenly only if necessary.

5. Confirm shape recovery before test fitting and paint preparation.

Avoid concentrated direct heat, open flame, or overheating, as excessive heat may damage the primer or permanently deform the panel.

Before Ordering

Compare the Partslink numbers, OEM reference numbers, Hollander numbers, rear fascia design, and mounting locations with the original vehicle components before purchase. Confirm that all components required beyond those listed in the package table are available for reuse or separate replacement.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda®, Accord®, LX®, Sport®, Touring®, and related names are registered trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Product Overview

Restore your Toyota Camry’s rear exterior appearance with this aftermarket rear bumper cover replacement, designed specifically for 2021–2024 Toyota Camry LE & XLE facelift models. Constructed from durable automotive-grade impact-resistant plastic, this rear bumper fascia shell features a primed black finish and is ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover. Suitable for collision repair, cosmetic restoration, and body shop replacement applications, this standalone fascia shell provides a clean foundation for professional refinishing and installation.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

Before You Order

Please verify your vehicle year, trim configuration, rear bumper design, and reference numbers before purchasing. Compare the bumper shape, lower openings, reflector locations, mounting points, and reference numbers with your existing part to confirm compatibility. Designed specifically for 2021–2024 Toyota Camry LE & XLE facelift models. Does not fit SE or XSE bumper configurations.

What’s Not Included

This listing includes the rear bumper cover fascia shell only. Lower valance or garnish components, reflectors, brackets, retainers, reinforcement components, exhaust-related trim pieces, and mounting hardware are not included unless specifically stated in the package contents.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Camry® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, interchange numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore your Toyota Camry’s front-end appearance with this aftermarket front bumper cover replacement, designed specifically for 2021–2024 Toyota Camry LE & XLE facelift models. Constructed from durable automotive-grade impact-resistant plastic, this front bumper fascia shell features a primed black finish and is ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover. Suitable for collision repair, cosmetic restoration, and body shop replacement applications, this standalone fascia shell provides a clean foundation for professional refinishing and installation.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

Before You Order

Please verify your vehicle year, trim configuration, front bumper design, and reference numbers before purchasing. Compare the bumper shape, grille and bezel openings, mounting points, and reference numbers with your existing part to confirm compatibility. Designed specifically for 2021–2024 Toyota Camry LE & XLE facelift models. Does not fit SE or XSE bumper configurations.

What’s Not Included

This listing includes the front bumper cover fascia shell only. Upper and lower grille components, side inserts or bezels, trim moldings, brackets, retainers, reinforcement components, lighting parts, and mounting hardware are not included unless specifically stated in the package contents.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Camry® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, interchange numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore your Toyota Camry’s rear exterior appearance with this aftermarket rear bumper cover replacement, designed specifically for 2021–2024 Toyota Camry SE & XSE facelift models. Constructed from durable automotive-grade impact-resistant plastic, this rear bumper fascia shell features a primed black finish and is ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover. Suitable for collision repair, cosmetic restoration, and body shop replacement applications, this standalone fascia shell provides a clean foundation for professional refinishing and installation

Reference Numbers 

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

Before You Order

Please verify your vehicle year, trim configuration, rear bumper design, and reference numbers before purchasing. Compare the bumper shape, lower openings, reflector locations, mounting points, and reference numbers with your existing part to confirm compatibility. Designed specifically for 2021–2024 Toyota Camry SE & XSE facelift configurations. Does not fit LE or XLE bumper configurations.

What’s Not Included

This listing includes the rear bumper cover fascia shell only. Lower valance or diffuser components, reflectors, garnish trim, brackets, retainers, reinforcement components, exhaust-related trim pieces, and mounting hardware are not included unless specifically stated in the package contents.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Camry® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, interchange numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore your Toyota Camry’s front-end appearance with this aftermarket front bumper cover replacement, designed specifically for 2021–2024 Toyota Camry SE & XSE facelift models. Constructed from durable automotive-grade impact-resistant plastic, this front bumper fascia shell features a primed black finish and is ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover. Suitable for collision repair, cosmetic restoration, and body shop replacement applications, this standalone fascia shell provides a clean foundation for professional refinishing and installation.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell
  

Before You Order

Please verify your vehicle year, trim configuration, front bumper design, and reference numbers before purchasing. Compare the bumper shape, grille and bezel openings, mounting points, and reference numbers with your existing part to confirm compatibility. Designed specifically for 2021–2024 Toyota Camry SE & XSE facelift configurations. Does not fit LE or XLE bumper configurations.

What’s Not Included

This listing includes the front bumper cover fascia shell only. Upper grille components, lower grille inserts, side or fog-light bezel components, trim moldings, brackets, retainers, reinforcement components, lighting parts, and mounting hardware are not included unless specifically stated in the package contents.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Camry® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, interchange numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore your Toyota Camry’s rear exterior appearance with this aftermarket rear bumper cover replacement, designed specifically for 2018–2020 Toyota Camry LE & XLE pre-facelift models. Constructed from durable automotive-grade impact-resistant plastic, this rear bumper fascia shell features a primed black finish and is ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

Before You Order

Please verify your vehicle year, trim configuration, rear bumper design, and reference numbers before purchasing. Designed specifically for 2018–2020 Toyota Camry LE & XLE pre-facelift models. Does not fit SE or XSE bumper configurations.

What’s Not Included

This listing includes the rear bumper cover fascia shell only. Lower valance or garnish components, reflectors, brackets, retainers, reinforcement components, mounting hardware, and other surrounding rear bumper accessories are not included unless specifically stated in the package contents.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Camry® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, interchange numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore your Toyota Camry’s rear exterior appearance with this aftermarket rear bumper cover replacement, designed specifically for 2018–2020 Toyota Camry SE & XSE pre-facelift models. Constructed from durable automotive-grade impact-resistant plastic, this rear bumper fascia shell features a primed black finish and is ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

Before You Order

Please verify your vehicle year, trim configuration, rear bumper design, and reference numbers before purchasing. Designed specifically for 2018–2020 Toyota Camry SE & XSE trims. Does not fit LE or XLE bumper configurations.

What’s Not Included

This listing includes the rear bumper cover fascia shell only. Lower valance or garnish components, reflectors, brackets, retainers, reinforcement components, and mounting hardware are not included unless specifically stated in the package contents.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Camry® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.