Accessories

Product Overview

Restore your Toyota Camry’s front-end appearance with this aftermarket front bumper cover replacement, designed specifically for 2018–2020 Toyota Camry LE & XLE pre-facelift models. Constructed from durable automotive-grade impact-resistant plastic, this front bumper fascia shell features a primed black finish and is ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover. Suitable for collision repair, cosmetic restoration, and body shop replacement applications, this standalone fascia shell provides a clean foundation for professional refinishing and installation.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

Before You Order

Please verify your vehicle year, trim configuration, front bumper design, and reference numbers before purchasing. Compare the bumper shape, grille and bezel openings, mounting points, and reference numbers with your existing part to confirm compatibility. Designed specifically for 2018–2020 Toyota Camry LE & XLE pre-facelift models. Does not fit SE or XSE bumper configurations.

What’s Not Included

This listing includes the front bumper cover fascia shell only. Upper and lower grille components, side inserts or bezels, trim moldings, brackets, retainers, reinforcement components, lighting parts, and mounting hardware are not included unless specifically stated in the package contents.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Camry® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, interchange numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore your Toyota Camry’s front-end appearance with this aftermarket front bumper cover replacement, designed specifically for 2018–2020 Toyota Camry SE & XSE pre-facelift models. Constructed from durable automotive-grade impact-resistant plastic, this standalone fascia shell features a primed black finish and is ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

Before You Order

Please verify your vehicle year, trim configuration, front bumper design, and reference numbers before purchasing. Designed specifically for 2018–2020 Toyota Camry SE & XSE pre-facelift models. Does not fit LE or XLE bumper configurations.

What’s Not Included

This listing includes the front bumper cover fascia shell only. Upper and lower grilles, fog light bezels, trim moldings, brackets, retainers, reinforcement components, lighting parts, and mounting hardware are not included unless specifically stated in the package contents.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Camry® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore your Toyota Camry’s rear exterior appearance with this aftermarket rear bumper cover replacement, designed specifically for 2015–2017 Toyota Camry LE & XLE trim configurations. Constructed from durable automotive-grade impact-resistant plastic, this standalone fascia shell features a primed black, ready-to-paint finish and provides a practical replacement for a cracked, scraped, damaged, or collision-worn original bumper cover.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

Before You Order

Please verify your vehicle year, trim configuration, rear bumper design, and reference numbers before purchasing. Designed specifically for 2015–2017 Toyota Camry LE & XLE trims. Does not fit SE or XSE bumper configurations.

What’s Not Included

This listing includes the rear bumper cover fascia shell only. Lower valance components, reflectors, brackets, retainers, reinforcement components, and mounting hardware are not included unless specifically stated in the package contents.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Camry® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore your Toyota Camry’s front-end appearance with this aftermarket front bumper cover replacement, designed specifically for 2015–2017 Toyota Camry LE & XLE trim configurations. Constructed from durable automotive-grade impact-resistant plastic, this standalone fascia shell features a primed black, ready-to-paint finish and is ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

Before You Order

Please verify your vehicle year, trim configuration, front bumper design, and reference numbers before purchasing. Designed specifically for 2015–2017 Toyota Camry LE & XLE trims. Does not fit SE or XSE bumper configurations.

What’s Not Included

This listing includes the front bumper cover fascia shell only. Grilles, trim moldings, brackets, retainers, reinforcement components, lighting parts, and mounting hardware are not included unless specifically stated in the package contents.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation.Toyota® and Camry® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore your Toyota Camry’s front exterior appearance with this aftermarket front bumper cover replacement, designed specifically for 2015–2017 Toyota Camry SE & XSE trim configurations. Constructed from durable automotive-grade impact-resistant plastic, this standalone fascia shell features a primed black, ready-to-paint finish. Ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

Before You Order

Please verify your vehicle year, trim configuration, front bumper design, and reference numbers before purchasing. Designed specifically for 2015–2017 Toyota Camry SE & XSE trims. Does not fit LE or XLE bumper configurations.

What’s Not Included

This listing includes the front bumper cover fascia shell only. Grilles, trim moldings, brackets, retainers, reinforcement components, lighting parts, mounting hardware, and other surrounding bumper accessories are not included unless specifically stated in the package contents.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Camry® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore your Toyota Camry’s rear exterior appearance with this aftermarket rear bumper cover replacement, designed specifically for 2012–2014 Toyota Camry Standard LE & Luxury XLE trim configurations. Constructed from durable automotive-grade impact-resistant plastic, this standalone fascia shell features a primed finish ready for professional preparation, painting, and color matching. Ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

What’s Not Included

This listing includes the rear bumper cover fascia shell only. Lower valance components, reflectors, brackets, retainers, reinforcement components, mounting hardware, and other surrounding bumper accessories are not included unless specifically stated in the package contents.

Before You Order

Please verify your vehicle year, trim configuration, rear bumper design, and reference numbers before purchasing. Designed specifically for 2012–2014 Toyota Camry Standard LE & Luxury XLE trims. Does not fit High-End SE or Sport bumper configurations.

Paint & Installation Notice

This bumper cover is supplied in a primed, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Camry® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore your Toyota Camry’s rear exterior appearance with this aftermarket rear bumper cover replacement, designed specifically for 2012–2014 Toyota Camry High-End SE & Sport trim configurations. Constructed from durable automotive-grade impact-resistant plastic, this standalone rear fascia shell features a primed black ready-to-paint finish and is ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

What’s Not Included

This listing includes the rear bumper cover fascia shell only. Lower valance components, reflectors, mounting brackets, retainers, reinforcement components, installation hardware, and other surrounding bumper accessories are not included unless specifically stated in the package contents.

Before You Order

Please verify your vehicle year, trim configuration, rear bumper design, and reference numbers before purchasing. This rear bumper cover is designed specifically for 2012–2014 Toyota Camry High-End SE & Sport trims and does not fit Standard LE or Luxury XLE bumper configurations.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, temporary flexing or minor shape variation may occur during shipping. Allow the bumper cover to rest at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Camry® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore your Toyota Camry’s front-end appearance with this aftermarket front bumper cover replacement, designed specifically for 2012–2014 Toyota Camry Standard LE & Luxury XLE trim configurations. Constructed from durable automotive-grade impact-resistant plastic, this standalone fascia shell is supplied in a primed finish ready for professional preparation, painting, and color matching. Ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

What’s Not Included

This listing includes the front bumper cover fascia shell only. Grilles, trim moldings, brackets, retainers, reinforcement components, lighting parts, emblems, mounting hardware, and other surrounding bumper accessories are not included unless specifically stated in the package contents.

Before You Order

Please verify your vehicle year, trim configuration, bumper design, and reference numbers before purchasing. This bumper cover is designed specifically for 2012–2014 Toyota Camry Standard LE & Luxury XLE trims and does not fit High-End SE or Sport bumper configurations.

Paint & Installation Notice

This bumper cover is supplied in a primed, unpainted finish and requires surface preparation and painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, temporary flexing or minor shape variation may occur during shipping. Allow the bumper cover to rest at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Camry® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore the front-end appearance of your Toyota Camry with this premium aftermarket front bumper cover replacement, designed specifically for 2012–2014 Toyota Camry High-End SE & Sport trim configurations. Manufactured from durable automotive-grade impact-resistant plastic, this bumper fascia comes in a primed black ready-to-paint finish, providing a clean surface for professional color matching before installation. Ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover, this standalone fascia shell helps restore the vehicle’s clean factory-inspired front-end appearance.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

What’s Not Included

This listing includes the front bumper cover fascia shell only. Grilles, trim moldings, brackets, retainers, reinforcement components, lighting parts, emblems, mounting hardware, and other surrounding bumper accessories are not included unless specifically stated in the package contents.

Before You Order

Please verify your vehicle year, trim configuration, bumper design, and reference numbers before purchasing. This bumper cover is designed specifically for 2012–2014 Toyota Camry High-End SE & Sport trims and is not intended for Standard LE or Luxury XLE bumper configurations.

Paint & Installation Notice

This bumper cover is supplied in a primed, unpainted finish and requires surface preparation and painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, the part may be packaged in a space-efficient manner for shipping. Minor temporary flexing or shape variation may occur during transit. Allow the bumper cover to rest at room temperature before test-fitting and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Camry® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore your Toyota Camry’s rear exterior appearance with this aftermarket rear bumper cover replacement, designed specifically for 2015–2017 Toyota Camry SE & XSE trim configurations. Constructed from durable automotive-grade impact-resistant plastic, this standalone fascia shell features a primed black, ready-to-paint finish and provides a practical replacement for a cracked, scraped, damaged, or collision-worn original bumper cover.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

Before You Order

Please verify your vehicle year, trim configuration, rear bumper design, and reference numbers before purchasing. Designed specifically for 2015–2017 Toyota Camry SE & XSE trims. Does not fit LE or XLE bumper configurations.

What’s Not Included

This listing includes the rear bumper cover fascia shell only. Lower valance components, reflectors, brackets, retainers, reinforcement components, and mounting hardware are not included unless specifically stated in the package contents.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Camry® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Description

This Front Bumper Bracket Right Passenger Side Support Retainer Mounting Spacer is designed for 2021-2022 Honda Accord (10th Gen Facelift Sedan All Trims Sport, EX, LX) and installs at the right-hand passenger-side front bumper and fender edge mounting area. This support guide retainer helps secure and position the front bumper cover along the passenger-side fender edge. It is suitable for replacing a bracket that is cracked, broken, loose, missing, or damaged during bumper removal, collision repair, or other front-end repair work. This listing includes the Right Passenger Side (RH) single component only – HO1043124 / OEM: 71193-TVA-A11 Core Spec.

Interchange Part Numbers

Please compare the component and reference numbers below with your existing part before ordering.

Key Features

• Right Passenger Side (RH) front bumper support retainer bracket

• Helps support and guide the bumper cover along the fender edge

• Integrated retention points for the corresponding side mounting location

• Suitable for replacing cracked, broken, loose, damaged, or missing retainers

• Useful for bumper replacement, collision repair, and front-end restoration

• Single-component replacement for the corresponding RH mounting position

Technical Fitment Notes

This front bumper support retainer guide bracket is intended specifically for the 2021-2022 facelift 10th Gen Honda Accord configuration. The molded bracket profile, snap-in retention points, and mounting locations are designed to correspond with the right-hand passenger-side fender edge and front bumper corner mounting area, helping maintain proper positioning and support of the bumper cover. Important: This component is intended for the 2021-2022 post-facelift configuration and should not be treated as interchangeable with the 2018-2020 pre-facelift configuration. The earlier models use a different fender-edge alignment and mounting-anchor layout. When matched to the correct vehicle application and mounting configuration, this bracket is designed as a direct replacement-style component without requiring cutting, drilling, or trimming.

Package Includes

• 1 × Front Bumper Right Passenger Side Support Retainer Mounting Spacer

Total: 1 Piece – Right Passenger Side (RH) Only

Important Component Notice

This listing includes only the component specifically stated in the Package Includes section. The left-side bracket and any additional hardware, fasteners, clips, screws, trim pieces, brackets, accessories, or surrounding components that are not specifically listed are not included. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the product description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original bracket, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the Right Passenger Side (RH) component only. Please confirm the installation side, vehicle year, facelift configuration, existing mounting layout, and reference numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Honda Motor Co., Ltd. or American Honda Motor Co., Inc. Honda® and Accord® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, mounting points, installation side, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Description

This Front Bumper Bracket Left Driver Side Support Retainer Mounting Spacer is designed for 2021-2022 Honda Accord (10th Gen Facelift Sedan All Trims Sport, EX, LX) and installs at the left-hand driver-side front bumper and fender edge mounting area. This support guide retainer helps secure and position the front bumper cover along the driver-side fender edge. It is suitable for replacing a bracket that is cracked, broken, loose, missing, or damaged during bumper removal, collision repair, or other front-end repair work. This listing includes the Left Driver Side (LH) single component only – HO1042124 / OEM: 71198-TVA-A11 Core Spec.

Interchange Part Numbers

Please compare the component and reference numbers below with your existing part before ordering.

Key Features

• Left Driver Side (LH) front bumper support retainer bracket

• Helps support and guide the bumper cover along the fender edge

• Integrated retention points for the corresponding side mounting location

• Suitable for replacing cracked, broken, loose, damaged, or missing retainers

• Useful for bumper replacement, collision repair, and front-end restoration

• Single-component replacement for the corresponding LH mounting position

Technical Fitment Notes

This front bumper support retainer guide bracket is intended specifically for the 2021-2022 facelift 10th Gen Honda Accord configuration. The molded bracket profile, snap-in retention points, and mounting locations are designed to correspond with the left-hand driver-side fender edge and front bumper corner mounting area, helping maintain proper positioning and support of the bumper cover. Important: This component is intended for the 2021-2022 post-facelift configuration and should not be treated as interchangeable with the 2018-2020 pre-facelift configuration. The earlier models use a different fender-edge alignment and mounting-anchor layout. When matched to the correct vehicle application and mounting configuration, this bracket is designed as a direct replacement-style component without requiring cutting, drilling, or trimming.

Package Includes

• 1 × Front Bumper Left Driver Side Support Retainer Mounting Spacer

Total: 1 Piece – Left Driver Side (LH) Only

Important Component Notice

This listing includes only the component specifically stated in the Package Includes section. The right-side bracket and any additional hardware, fasteners, clips, screws, trim pieces, brackets, accessories, or surrounding components that are not specifically listed are not included. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the product description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original bracket, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the Left Driver Side (LH) component only. Please confirm the installation side, vehicle year, facelift configuration, existing mounting layout, and reference numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Honda Motor Co., Ltd. or American Honda Motor Co., Inc. Honda® and Accord® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, mounting points, installation side, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Description

This Front Bumper Bracket Left Driver Side Support Retainer Mounting Spacer is designed for 2018-2020 Honda Accord (10th Gen Pre-Facelift Sedan All Trims Sport, EX, LX) and installs at the left-hand driver-side front bumper and fender edge mounting area. This support guide retainer helps secure and position the front bumper cover along the driver-side fender edge. It is suitable for replacing a bracket that is cracked, broken, loose, missing, or damaged during bumper removal, collision repair, or other front-end repair work. This listing includes the Left Driver Side (LH) single component only – HO1042136 / OEM: 71198-TVA-A01 Core Spec.

Interchange Part Numbers

Please compare the component and reference numbers below with your existing part before ordering.

Key Features

• Left Driver Side (LH) front bumper support retainer bracket

• Helps support and guide the bumper cover along the fender edge

• Integrated retention points for the corresponding side mounting location

• Suitable for replacing cracked, broken, loose, damaged, or missing retainers

• Useful for bumper replacement, collision repair, and front-end restoration

• Single-component replacement for the corresponding LH mounting position

Technical Fitment Notes

This front bumper support retainer guide bracket is intended specifically for the 2018-2020 pre-facelift 10th Gen Honda Accord configuration. The molded bracket profile, snap-in retention points, and mounting locations are designed to correspond with the left-hand driver-side fender edge and front bumper corner mounting area, helping keep the bumper cover properly positioned and supported. Important: This component is intended for the 2018-2020 pre-facelift configuration and should not be treated as interchangeable with the 2021-2022 post-facelift configuration. The later models use a different fender-edge mounting and anchor layout. When matched to the correct vehicle application and mounting configuration, this bracket is designed as a direct replacement-style component without requiring cutting, drilling, or trimming.

Package Includes

• 1 × Front Bumper Left Driver Side Support Retainer Mounting Spacer

Total: 1 Piece – Left Driver Side (LH) Only

Important Component Notice

This listing includes only the component specifically stated in the Package Includes section. The right-side bracket and any additional hardware, fasteners, clips, screws, trim pieces, brackets, accessories, or surrounding components that are not specifically listed are not included. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the product description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original bracket, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the Left Driver Side (LH) component only. Please confirm the installation side, vehicle year, pre-facelift configuration, existing mounting layout, and reference numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Honda Motor Co., Ltd. or American Honda Motor Co., Inc. Honda® and Accord® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, mounting points, installation side, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Description

This Front Bumper Bracket Right Passenger Side Support Retainer Mounting Spacer is designed for 2018-2020 Honda Accord (10th Gen Pre-Facelift Sedan All Trims Sport, EX, LX) and installs at the right-hand passenger-side front bumper and fender edge mounting area. This support guide retainer helps secure and position the front bumper cover along the passenger-side fender edge. It is suitable for replacing a bracket that is cracked, broken, loose, missing, or damaged during bumper removal, collision repair, or other front-end repair work. This listing includes the Right Passenger Side (RH) single component only – HO1043136 / OEM: 71193-TVA-A01 Core Spec.

Interchange Part Numbers

Please compare the component and reference numbers below with your existing part before ordering.

Key Features

• Right Passenger Side (RH) front bumper support retainer bracket

• Helps support and guide the bumper cover along the fender edge

• Integrated retention points for the corresponding side mounting location

• Suitable for replacing cracked, broken, loose, damaged, or missing retainers

• Useful for bumper replacement, collision repair, and front-end restoration

• Single-component replacement for the corresponding RH mounting position

Technical Fitment Notes

This front bumper support retainer guide bracket is intended specifically for the 2018-2020 pre-facelift 10th Gen Honda Accord configuration. The molded bracket profile, snap-in retention points, and mounting locations are designed to correspond with the right-hand passenger-side fender edge and front bumper corner mounting area, helping keep the bumper cover properly positioned and supported. Important: This component is intended for the 2018-2020 pre-facelift configuration and should not be treated as interchangeable with the 2021-2022 post-facelift configuration. The later models use a different fender-edge mounting and anchor layout. When matched to the correct vehicle application and mounting configuration, this bracket is designed as a direct replacement-style component without requiring cutting, drilling, or trimming.

Package Includes

• 1 × Front Bumper Right Passenger Side Support Retainer Mounting Spacer

Total: 1 Piece – Right Passenger Side (RH) Only

Important Component Notice

This listing includes only the component specifically stated in the Package Includes section. The left-side bracket and any additional hardware, fasteners, clips, screws, trim pieces, brackets, accessories, or surrounding components that are not specifically listed are not included. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the product description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original bracket, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the Right Passenger Side (RH) component only. Please confirm the installation side, vehicle year, pre-facelift configuration, existing mounting layout, and reference numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Honda Motor Co., Ltd. or American Honda Motor Co., Inc. Honda® and Accord® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, mounting points, installation side, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Description

This Front Bumper Bracket Right Passenger Side Support Retainer Mounting Spacer is designed for 2016-2021 Honda Civic 4-Door Sedan (10th Gen Framework) and installs at the right-hand passenger-side front bumper and fender edge mounting area. This support guide retainer helps secure and position the front bumper cover along the passenger-side fender edge. It is suitable for replacing a bracket that is cracked, broken, loose, missing, or damaged during bumper removal, collision repair, or other front-end repair work. This listing includes the Right Passenger Side (RH) single component only – HO1043134 / OEM: 71193-TBA-A01 Core Spec.

Interchange Part Numbers

Please compare the component and reference numbers below with your existing part before ordering.

Key Features

• Right Passenger Side (RH) front bumper support retainer bracket

• Helps support and guide the front bumper cover along the fender edge

• Integrated retention points for the corresponding mounting location

• Suitable for replacing cracked, broken, loose, damaged, or missing retainers

• Useful for bumper replacement, collision repair, and front-end restoration

• Single-component replacement for the corresponding RH mounting position

Technical Fitment Notes

This front bumper support retainer guide bracket is intended specifically for the 2016-2021 10th Gen Honda Civic 4-Door Sedan configuration. The molded bracket profile, snap-in retention points, and mounting locations are designed to correspond with the right-hand passenger-side fender edge and front bumper corner mounting area, helping maintain proper positioning and support of the bumper cover. Important: This component is intended for the 2016-2021 10th Gen framework and should not be treated as interchangeable with the earlier 2012-2015 9th Gen configuration. The earlier generation uses a different mounting and structural anchor layout. When matched to the correct vehicle application and mounting configuration, this bracket is designed as a direct replacement-style component without requiring cutting, drilling, or trimming.

Package Includes

• 1 × Front Bumper Right Passenger Side Support Retainer Mounting Spacer

Total: 1 Piece – Right Passenger Side (RH) Only

Important Component Notice

This listing includes only the component specifically stated in the Package Includes section. The left-side bracket and any additional hardware, fasteners, clips, screws, trim pieces, brackets, accessories, or surrounding components that are not specifically listed are not included. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the product description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original bracket, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the Right Passenger Side (RH) component only. Please confirm the installation side, vehicle year, 10th Gen configuration, 4-door sedan body style, existing mounting layout, and reference numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Honda Motor Co., Ltd. or American Honda Motor Co., Inc. Honda® and Civic® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, body style, trim level, production configuration, mounting points, installation side, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Loose bumper? Missing push clips? Hanging splash shield? A broken retainer clip may seem like a small problem, but it can quickly lead to loose body panels, unwanted rattles, poor panel alignment, and unfinished repairs. VELNOX Automotive Push Retainer Clips are designed to replace worn, damaged, or missing factory fasteners with a secure, reliable solution. Made from durable automotive-grade nylon, these replacement push clips provide a strong hold while resisting heat, moisture, vibration, and everyday road conditions. Whether you're replacing a few missing clips or completing a larger repair, these automotive fastener clips help keep your vehicle looking clean, secure, and properly assembled.

Perfect for Multiple Automotive Applications

These versatile automotive push retainer clips are commonly used throughout many vehicles and are ideal for securing:

• Front bumpers

• Rear bumpers

• Fender liners

• Splash shields

• Wheel well liners

• Underbody panels

• Engine covers

• Radiator covers

• Interior trim panels

• Exterior trim panels

Perfect for routine maintenance, collision repairs, restoration projects, and DIY automotive upgrades.

Why Replace Worn Retainer Clips?

Factory push clips naturally wear out over time due to road vibration, weather exposure, repeated removal, and normal vehicle aging. Damaged clips may allow bumpers, splash shields, wheel liners, or trim panels to loosen, creating unwanted movement, vibration, or rattling while driving. Replacing worn retainers helps restore proper panel alignment, improves overall appearance, and keeps important vehicle components securely attached.

Durable Nylon Construction

Manufactured from high-strength automotive-grade nylon, these plastic retainer clips are designed to resist cracking, corrosion, moisture, temperature changes, and everyday wear for dependable long-term performance.

Secure Push-Lock Design

The expansion-style push pin locks firmly into place after installation, creating a secure hold that helps prevent loose panels while allowing easy removal for future maintenance when needed.

Fast & Easy Installation

No special tools or professional experience required. Simply insert the clip into the mounting hole and press the center pin to lock it securely in place. Installation takes only seconds, making repairs faster and easier.

Universal Automotive Compatibility

These automotive push retainer clips are commonly used on many cars, SUVs, pickup trucks, vans, and crossovers. For the best fit, please compare your original clip dimensions and shape with the product specifications before purchasing.

Ideal for Repairs & Preventive Maintenance

Whether you're replacing broken bumper clips after a repair, reinstalling a splash shield, securing loose trim panels, or keeping spare fasteners in your garage or toolbox, these push retainer clips are an essential addition to every vehicle owner's maintenance kit.

Product Features

• Durable automotive-grade nylon construction resists cracking and corrosion
• Secure push-type expansion locking design eliminates loose or rattling panels
• Fast and easy tool-free installation inserts securely in seconds
• Versatile application ideal for bumpers, splash shields, fender liners, and trim
• Reliable, premium aftermarket replacement for worn or missing factory fasteners

FAQS

1. Will these clips fit my vehicle?

These push retainer clips are compatible with many vehicles. Please compare your original clip's size, shape, and dimensions with the product specifications before ordering.

2. Are these OEM clips?

No. These are premium aftermarket replacement clips designed to provide performance comparable to many factory-installed retainers.

3. Where can these clips be used?

They are commonly used for bumpers, splash shields, fender liners, wheel well covers, engine covers, underbody panels, and interior or exterior trim pieces.

4. Can these clips be reused?

Many clips can be reused if removed carefully, but replacing damaged or worn retainers is recommended to ensure the most secure fit.

5. Are installation tools included?

Please refer to the product options or package contents to confirm whether a trim removal tool is included with your selected package.

Keep Your Vehicle Secure with Confidence

Small fasteners play a big role in keeping your vehicle properly assembled. Whether you're replacing damaged clips after a repair or stocking up on spare retainers for future maintenance, VELNOX Automotive Push Retainer Clips provide a simple, dependable solution for securing body panels and keeping your vehicle looking its best.