Products

Product Overview
Replace a cracked, damaged, or collision-worn front bumper cover on 2015-2017 Toyota Camry LE and XLE models. This primed bumper fascia restores the factory-style front-end appearance with the horizontal slat grille opening.

Available in two configurations based on factory parking sensor equipment. Each order includes one front bumper cover only, based on the option selected at checkout.

Variant Options

Without Parking Sensor Holes

• OEM Reference: 52119-07912
• Partslink: TO1000409
• For vehicles without factory front parking sensors

With Parking Sensor Holes

• OEM Reference: 52119-07913
• Partslink: TO1000412
• For vehicles originally equipped with factory front parking sensors

Package Includes

• 1 × Front Bumper Cover Bare Shell
• Primed black finish

This listing includes the front bumper cover shell only. Grille, fog light bezels, sensors, reinforcement beam, brackets, and mounting hardware are not included.

Important Note
Fits 2015-2017 Toyota Camry LE and XLE trims. Confirm whether your original bumper has parking sensor holes before ordering. Does not fit SE or XSE models (different grille style).

Paint and Installation Notice
Supplied in a primed finish and requires professional preparation and painting. Test-fit before painting. Professional installation is recommended.

Compatibility Disclaimer
This product is an aftermarket replacement component and is not a genuine Toyota OEM product. OEM reference numbers, vehicle names, and model names are provided solely for product identification and compatibility-reference purposes. Toyota® and Camry® are registered trademarks of Toyota Motor Corporation. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Toyota Motor Corporation.

Product Overview
Replace a cracked, damaged, or collision-worn front bumper cover on 2015-2017 Toyota Camry SE and XSE models. This primed bumper fascia restores the factory-style sport front-end appearance with the honeycomb grille opening.

Available in two configurations based on factory parking sensor equipment. Each order includes one front bumper cover only, based on the option selected at checkout.

Variant Options

Without Parking Sensor Holes

• OEM Reference: 52119-07912
• Partslink: TO1000409
• For vehicles without factory front parking sensors

With Parking Sensor Holes

• OEM Reference: 52119-07913
• Partslink: TO1000412
• For vehicles originally equipped with factory front parking sensors

Package Includes

• 1 × Front Bumper Cover Bare Shell
• Primed black finish

This listing includes the front bumper cover shell only. Grille, fog light bezels, sensors, reinforcement beam, brackets, and mounting hardware are not included.

Important Note
Fits 2015-2017 Toyota Camry SE and XSE trims. Confirm whether your original bumper has parking sensor holes before ordering. Does not fit LE or XLE models (different grille style).

Paint and Installation Notice
Supplied in a primed finish and requires professional preparation and painting. Test-fit before painting. Professional installation is recommended.

Compatibility Disclaimer
This product is an aftermarket replacement component and is not a genuine Toyota OEM product. OEM reference numbers, vehicle names, and model names are provided solely for product identification and compatibility-reference purposes. Toyota® and Camry® are registered trademarks of Toyota Motor Corporation. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Toyota Motor Corporation.

Product Overview
Replace a cracked, damaged, or collision-worn rear bumper cover on 2015-2017 Toyota Camry LE and XLE models. This primed bumper fascia restores the factory-style rear-end appearance.

Available in two configurations based on factory parking sensor equipment. Each order includes one rear bumper cover only, based on the option selected at checkout.

Variant Options

Without Parking Sensor Holes

• OEM Reference: 52159-06989
• Partslink: TO1100315
• For vehicles without factory rear parking sensors

With Parking Sensor Holes

• OEM Reference: 52159-06990
• Partslink: TO1100317
• For vehicles originally equipped with factory rear parking sensors

Package Includes

• 1 × Rear Bumper Cover Bare Shell
• Primed black finish

This listing includes the rear bumper cover shell only. Reflectors, lower valance, sensors, brackets, and mounting hardware are not included.

Important Note
Fits 2015-2017 Toyota Camry LE and XLE trims. Confirm whether your original bumper has parking sensor holes before ordering. Does not fit SE or XSE models.

Paint and Installation Notice
Supplied in a primed finish and requires professional preparation and painting. Test-fit before painting. Professional installation is recommended.

Compatibility Disclaimer
This product is an aftermarket replacement component and is not a genuine Toyota OEM product. OEM reference numbers, vehicle names, and model names are provided solely for product identification and compatibility-reference purposes. Toyota® and Camry® are registered trademarks of Toyota Motor Corporation. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Toyota Motor Corporation.

Product Overview
Replace a cracked, damaged, or collision-worn rear bumper cover on 2015-2017 Toyota Camry SE and XSE models. This primed bumper fascia restores the factory-style rear-end appearance.

Available in two configurations based on factory parking sensor equipment. Each order includes one rear bumper cover only, based on the option selected at checkout.

Variant Options

Without Parking Sensor Holes

• OEM Reference: 52159-06989
• Partslink: TO1100315
• For vehicles without factory rear parking sensors

With Parking Sensor Holes

• OEM Reference: 52159-06990
• Partslink: TO1100317
• For vehicles originally equipped with factory rear parking sensors

Package Includes

• 1 × Rear Bumper Cover Bare Shell
• Primed black finish

This listing includes the rear bumper cover shell only. Reflectors, lower valance, sensors, brackets, and mounting hardware are not included.

Important Note
Fits 2015-2017 Toyota Camry SE and XSE trims. Confirm whether your original bumper has parking sensor holes before ordering.

Paint and Installation Notice
Supplied in a primed finish and requires professional preparation and painting. Test-fit before painting. Professional installation is recommended.

Compatibility Disclaimer
This product is an aftermarket replacement component and is not a genuine Toyota OEM product. OEM reference numbers, vehicle names, and model names are provided solely for product identification and compatibility-reference purposes. Toyota® and Camry® are registered trademarks of Toyota Motor Corporation. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Toyota Motor Corporation.

Product Overview
Bring back the clean factory-style lower front bumper of your 2016-2018 Honda Civic with this Fog Light Cover. Designed for vehicles equipped with factory fog lights, this cover frames the fog lamp opening while restoring the original bumper appearance.

Fits models such as EX-T, EX-L, Touring, Si, and similar trims with factory fog lights. Available in left and right side configurations. Select the correct side based on your vehicle.

Package Includes

• 1 × Front Bumper Fog Light Cover

Not Included
Fog light assembly, bulb, wiring, and mounting hardware are not included.

Reference Numbers

• Left Driver Side: 71108-TBA-A10
• Right Passenger Side: 71103-TBA-A10

Vehicle Fitment
Fits 2016-2018 Honda Civic models with factory fog lights (EX-T, EX-L, Touring, Si, and similar trims). Confirm original cover shape, fog lamp opening, and side before purchasing.

Important Note
This product is for models with factory fog lights. Compare the original cover and fog lamp opening before ordering.

Compatibility Disclaimer
This product is a replacement component and is not a genuine Honda OEM product. OEM reference numbers, vehicle names, and model names are provided solely for product identification and compatibility-reference purposes. Honda® and Civic® are registered trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with Honda.

Product Overview
Bring back the clean factory-style lower front bumper of your 2016-2018 Honda Civic with this Fog Light Cover. Designed for vehicles without factory fog lights, this cover fills the fog lamp opening area while restoring the original bumper appearance.

Fits models such as LX and similar base trims without factory fog lights. Available in left and right side configurations. Select the correct side based on your vehicle.

Package Includes

• 1 × Front Bumper Fog Light Cover

Not Included
Mounting hardware and surrounding bumper components are not included.

Reference Numbers

• Left Driver Side: 71108-TBA-A00
• Right Passenger Side: 71103-TBA-A00

Vehicle Fitment
Fits 2016-2018 Honda Civic models without factory fog lights (LX and similar base trims). Confirm original cover shape and side before purchasing.

Important Note
This product is for models without factory fog lights. Compare the original cover before ordering.

Compatibility Disclaimer
This product is a replacement component and is not a genuine Honda OEM product. OEM reference numbers, vehicle names, and model names are provided solely for product identification and compatibility-reference purposes. Honda® and Civic® are registered trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with Honda.

Product Overview
Bring back the clean factory-style lower front bumper of your 2016-2018 Honda Civic with this aftermarket Front Bumper Lower Grille. This black plastic mesh is designed to replace a cracked, damaged, or missing original lower grille while helping maintain proper airflow.

Available in three configurations. Select the correct variant based on your vehicle type.

Package Includes

• 1 × Front Bumper Lower Grille

Not Included
Bumper cover, upper grille, and mounting hardware are not included.

Reference Numbers

• 1.5L: 71102-TBA-A00
• 2.0L: 71102-TBA-A10
• Si: 71102-TBF-A00

Vehicle Fitment

• 1.5L variant fits non-Si models with 1.5L turbo engine
• 2.0L variant fits non-Si models with 2.0L engine
• Si variant fits Civic Si models only

Important Note
Confirm your vehicle type and original grille configuration before purchasing. The three variants are not interchangeable.

Compatibility Disclaimer
This product is an aftermarket replacement component and is not a genuine Honda OEM product. OEM reference numbers, vehicle names, and model names are provided solely for product identification and compatibility-reference purposes. Honda® and Civic® are registered trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with Honda.

Product Overview
Bring back the clean factory-style lower front bumper of your 2016-2018 Honda Civic with this aftermarket Front Lower Bumper Lip Spoiler. This replacement valance panel is designed for the original underside position beneath the center grille, helping finish the lower edge of the front fascia while providing a protective barrier along the underside of the bumper.

Its molded shape follows the original lower bumper contour and helps maintain the intended spacing and coverage below the center intake area. Made from high-impact automotive-grade ABS plastic, the panel features a raw textured matte black surface and can be installed in its original-style finish without painting.

Available in two configurations. Select the correct variant based on your vehicle type.

Package Includes

• 1 × Front Lower Bumper Lip Spoiler / Valance Panel

Important Note
This listing includes the front lower bumper lip / valance panel only. Front bumper cover, grille, brackets, clips, screws, and other surrounding components are not included. Compare the original lower panel shape and mounting locations before ordering.

Reference Numbers

• Si: 71110-TGG-A00

Vehicle Fitment

• Non-Si variant fits LX, EX, EX-T, EX-L, Touring and similar non-Si models
• Si variant fits Civic Si models only

Important Note
Confirm your vehicle type (Non-Si or Si) and original lower bumper configuration before purchasing. The two variants are not interchangeable.

Compatibility Disclaimer
This product is an aftermarket replacement component and is not a genuine Honda OEM product. OEM reference numbers, vehicle names, and model names are provided solely for product identification and compatibility-reference purposes. Honda® and Civic® are registered trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with Honda. Buyers should verify the original part and bumper configuration before purchase.

Product Overview
Bring back the clean factory-style upper grille area of your 2016-2018 Honda Civic with this Front Upper Grille Trim. Positioned between the center emblem and the headlight, this molding helps restore the continuous accent line across the front fascia.

Available in left and right side configurations. Select the correct side based on your vehicle.

Package Includes

• 1 × Front Upper Grille Molding Trim

Reference Numbers

• Left Driver Side: 71129-TBA-A01
• Right Passenger Side: 71124-TBA-A01

Vehicle Fitment
Fits 2016-2018 Honda Civic Sedan and Coupe models (excluding Si). Confirm original molding shape and side before purchasing.

Important Note
Sold individually. Center grille, emblem, headlight, and opposite-side molding are not included.

Compatibility Disclaimer
This product is a replacement component and is not a genuine Honda OEM product. OEM reference numbers, vehicle names, and model names are provided solely for product identification and compatibility-reference purposes. Honda® and Civic® are registered trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with Honda.

Product Overview
Bring back the clean factory-style front end of your 2016-2018 Honda Civic with this Front Upper Grille. This replacement is designed to match the factory contour and mounting layout, helping restore the original look between the headlights when the original grille is cracked, damaged, or missing.

Available in two configurations. Select the correct variant based on your vehicle type.

Package Includes

• 1 × Front Upper Grille

Not Included
Honda emblem, grille molding, and mounting hardware are not included.

Reference Numbers

• Non-Si: 71121-TBA-A01
• Si: 71121-TBF-A01

Vehicle Fitment

• Non-Si variant fits LX, EX, EX-T, EX-L, Touring and similar non-Si models
• Si variant fits Civic Si models only

Important Note
Confirm your vehicle type (Non-Si or Si) and original grille configuration before purchasing. The two variants are not interchangeable.

Compatibility Disclaimer
This product is a replacement component and is not a genuine Honda OEM product. OEM reference numbers, vehicle names, and model names are provided solely for product identification and compatibility-reference purposes. Honda® and Civic® are registered trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with Honda.

This Front Bumper Restoration Kit is designed for the 2016-2018 Honda Civic Sedan.

The package includes the main front bumper cover and matching upper grille molding, lower fog light bezels, lower chin lip, and side retainer brackets for a more complete front-end repair.

Two finish options are available for the upper grille molding.

Option 1: LX / EX Style (Bright Chrome) Option 2: Sport / Si Style (Glossy Piano Black)

Package Includes

• 1 × Front Bumper Cover Fascia Bare Shell (primed)
• 1 × Front Upper Grille Molding (Chrome or Piano Black)
• 1 × Left & Right Lower Fog Light Bezels
• 1 × Front Lower Chin Lip / Valance Set
• 1 × Left & Right Side Retainer Brackets

Reference Numbers

• Front Bumper Cover: HO1000306 / OEM 04711-TBA-A00ZZ
• Fog Light Bezels: OEM 71103-TBA-A00 / 71108-TBA-A00

Vehicle Fitment Fits 2016-2018 Honda Civic 4-door sedan models. Confirm the original bumper shape, grille style, and fog light configuration before ordering. Does not fit 2019-2021 facelift or Hatchback unless verified.

Paint and Installation Notice The bumper cover arrives primed and requires professional preparation and paint matching. Test-fit all components before painting. Professional installation is recommended.

Compatibility Disclaimer Aftermarket replacement kit. Not a genuine Honda OEM product. Honda® and Civic® are registered trademarks of Honda Motor Co., Ltd. Velnox Auto is not affiliated with Honda.

Replace a cracked, dented, or damaged front bumper cover on your 2016-2018 Nissan Altima with this primed bare shell fascia. Available in two configurations based on the original parking sensor layout.

Option 1: Without Parking Sensor Holes

• Front Bumper Cover Fascia: NI1000311 / 62022-9HS0H (primed, no sensor openings)
• For Base, S, SR, SV and similar models without factory front parking sensors

Option 2: With Parking Sensor Holes

• Front Bumper Cover Fascia: NI1000312 / 62022-9HS2H (primed, with sensor openings)
• For SL and models equipped with factory front parking sensors

Package Details
Each order includes one primed black front bumper cover bare shell in the selected configuration. Grilles, fog light bezels, sensors, reinforcement beam, and mounting hardware are not included. Compatible original components may be transferred.

Important Compatibility Note
Fits 2016-2018 Nissan Altima only. Does not fit 2013-2015 pre-facelift models. Confirm your original bumper has or does not have front parking sensor holes before ordering.

Paint and Installation Notice
Supplied in primed black finish and requires professional preparation and paint matching. Test-fit before painting. Professional installation is recommended.

Compatibility Disclaimer
Aftermarket replacement component. Not a genuine Nissan OEM product. Nissan® and Altima® are trademarks of Nissan Motor Co., Ltd. VELNOX Auto is not affiliated with Nissan.

Replace a cracked, dented, or damaged rear bumper cover on your 2016-2018 Nissan Altima with this primed bare shell fascia. Available in two configurations based on the original parking sensor layout.

Option 1: Without Parking Sensor Holes

• Rear Bumper Cover Fascia: NI1100309 / 85022-9HS0H (primed, no sensor openings)
• For Base, S, SR, SV and similar models without factory rear parking sensors

Option 2: With Parking Sensor Holes

• Rear Bumper Cover Fascia: NI1100311 / 85022-9HS2H (primed, with sensor openings)
• For SL and models equipped with factory rear parking sensors

Package Details
Each order includes one primed black rear bumper cover bare shell in the selected configuration. Reflectors, lower valance, sensors, reinforcement beam, and mounting hardware are not included. Compatible original components may be transferred.

Important Compatibility Note
Fits 2016-2018 Nissan Altima only. Does not fit 2013-2015 pre-facelift models. Confirm your original bumper has or does not have rear parking sensor holes before ordering.

Paint and Installation Notice
Supplied in primed black finish and requires professional preparation and paint matching. Test-fit before painting. Professional installation is recommended.

Compatibility Disclaimer
Aftermarket replacement component. Not a genuine Nissan OEM product. Nissan® and Altima® are trademarks of Nissan Motor Co., Ltd. VELNOX Auto is not affiliated with Nissan.