Products

Product Description

This Front Bumper Bracket Right Passenger Side Fender Support Guide is designed for 2017-2022 Honda CR-V (5th Gen Household Compact SUV All Models) and installs at the right-hand passenger-side front bumper and outer fender-edge mounting area. This outer edge lock retainer clip plate helps support, guide, and secure the front bumper cover along the passenger-side corner. It is suitable for replacing a guide bracket that is cracked, broken, loose, missing, or damaged during bumper removal, collision repair, or other front-end repair work. This listing includes the Right Passenger Side (RH) single component only – HO1043131 / OEM: 71193-TNY-A01 Core Spec.

Interchange Part Numbers

Please compare the component and reference numbers below with your existing part before ordering.

Key Features

• Right Passenger Side (RH) front bumper fender support guide

• Helps support and guide the front bumper cover along the outer fender edge

• Integrated retention points for the corresponding mounting location

• Suitable for replacing cracked, broken, loose, damaged, or missing bumper guides

• Useful for bumper replacement, collision repair, and front-end restoration

• Single-component replacement for the corresponding RH mounting position

Technical Fitment Notes

This front bumper fender support guide is intended specifically for the 2017-2022 5th Gen Honda CR-V configuration. The molded guide profile, snap-in retention points, and mounting locations are designed to correspond with the right-hand passenger-side front bumper and outer fender-edge mounting area, helping maintain proper positioning and support of the bumper cover. Important: This component is intended for the 2017-2022 5th Gen Honda CR-V framework and should not be treated as interchangeable with alternate Honda Accord mounting configurations. Different vehicle platforms may use different bumper support profiles, anchor locations, and mounting layouts. When matched to the correct vehicle application and mounting configuration, this guide is designed as a direct replacement-style component without requiring cutting, drilling, or trimming.

Package Includes

• 1 × Front Bumper Right Passenger Side Fender Support Guide

Total: 1 Piece – Right Passenger Side (RH) Only

Important Component Notice

This listing includes only the component specifically stated in the Package Includes section. The left-side guide and any additional hardware, fasteners, clips, screws, trim pieces, brackets, accessories, or surrounding components that are not specifically listed are not included. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the product description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original guide, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the Right Passenger Side (RH) component only. Please confirm the installation side, vehicle year, 5th Gen CR-V configuration, existing mounting layout, and reference numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Honda Motor Co., Ltd. or American Honda Motor Co., Inc. Honda® and CR-V® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, mounting points, installation side, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Description

This Front Bumper Bracket Right Passenger Side Support Retainer Mounting Spacer is designed for 2016-2021 Honda Civic 4-Door Sedan (10th Gen Framework) and installs at the right-hand passenger-side front bumper and fender edge mounting area. This support guide retainer helps secure and position the front bumper cover along the passenger-side fender edge. It is suitable for replacing a bracket that is cracked, broken, loose, missing, or damaged during bumper removal, collision repair, or other front-end repair work. This listing includes the Right Passenger Side (RH) single component only – HO1043134 / OEM: 71193-TBA-A01 Core Spec.

Interchange Part Numbers

Please compare the component and reference numbers below with your existing part before ordering.

Key Features

• Right Passenger Side (RH) front bumper support retainer bracket

• Helps support and guide the front bumper cover along the fender edge

• Integrated retention points for the corresponding mounting location

• Suitable for replacing cracked, broken, loose, damaged, or missing retainers

• Useful for bumper replacement, collision repair, and front-end restoration

• Single-component replacement for the corresponding RH mounting position

Technical Fitment Notes

This front bumper support retainer guide bracket is intended specifically for the 2016-2021 10th Gen Honda Civic 4-Door Sedan configuration. The molded bracket profile, snap-in retention points, and mounting locations are designed to correspond with the right-hand passenger-side fender edge and front bumper corner mounting area, helping maintain proper positioning and support of the bumper cover. Important: This component is intended for the 2016-2021 10th Gen framework and should not be treated as interchangeable with the earlier 2012-2015 9th Gen configuration. The earlier generation uses a different mounting and structural anchor layout. When matched to the correct vehicle application and mounting configuration, this bracket is designed as a direct replacement-style component without requiring cutting, drilling, or trimming.

Package Includes

• 1 × Front Bumper Right Passenger Side Support Retainer Mounting Spacer

Total: 1 Piece – Right Passenger Side (RH) Only

Important Component Notice

This listing includes only the component specifically stated in the Package Includes section. The left-side bracket and any additional hardware, fasteners, clips, screws, trim pieces, brackets, accessories, or surrounding components that are not specifically listed are not included. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the product description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original bracket, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the Right Passenger Side (RH) component only. Please confirm the installation side, vehicle year, 10th Gen configuration, 4-door sedan body style, existing mounting layout, and reference numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Honda Motor Co., Ltd. or American Honda Motor Co., Inc. Honda® and Civic® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, body style, trim level, production configuration, mounting points, installation side, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Description

This Front Bumper Bracket Right Passenger Side Support Retainer Mounting Spacer is designed for 2018-2020 Honda Accord (10th Gen Pre-Facelift Sedan All Trims Sport, EX, LX) and installs at the right-hand passenger-side front bumper and fender edge mounting area. This support guide retainer helps secure and position the front bumper cover along the passenger-side fender edge. It is suitable for replacing a bracket that is cracked, broken, loose, missing, or damaged during bumper removal, collision repair, or other front-end repair work. This listing includes the Right Passenger Side (RH) single component only – HO1043136 / OEM: 71193-TVA-A01 Core Spec.

Interchange Part Numbers

Please compare the component and reference numbers below with your existing part before ordering.

Key Features

• Right Passenger Side (RH) front bumper support retainer bracket

• Helps support and guide the bumper cover along the fender edge

• Integrated retention points for the corresponding side mounting location

• Suitable for replacing cracked, broken, loose, damaged, or missing retainers

• Useful for bumper replacement, collision repair, and front-end restoration

• Single-component replacement for the corresponding RH mounting position

Technical Fitment Notes

This front bumper support retainer guide bracket is intended specifically for the 2018-2020 pre-facelift 10th Gen Honda Accord configuration. The molded bracket profile, snap-in retention points, and mounting locations are designed to correspond with the right-hand passenger-side fender edge and front bumper corner mounting area, helping keep the bumper cover properly positioned and supported. Important: This component is intended for the 2018-2020 pre-facelift configuration and should not be treated as interchangeable with the 2021-2022 post-facelift configuration. The later models use a different fender-edge mounting and anchor layout. When matched to the correct vehicle application and mounting configuration, this bracket is designed as a direct replacement-style component without requiring cutting, drilling, or trimming.

Package Includes

• 1 × Front Bumper Right Passenger Side Support Retainer Mounting Spacer

Total: 1 Piece – Right Passenger Side (RH) Only

Important Component Notice

This listing includes only the component specifically stated in the Package Includes section. The left-side bracket and any additional hardware, fasteners, clips, screws, trim pieces, brackets, accessories, or surrounding components that are not specifically listed are not included. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the product description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original bracket, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the Right Passenger Side (RH) component only. Please confirm the installation side, vehicle year, pre-facelift configuration, existing mounting layout, and reference numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Honda Motor Co., Ltd. or American Honda Motor Co., Inc. Honda® and Accord® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, mounting points, installation side, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Description

This Front Bumper Bracket Right Passenger Side Support Retainer Mounting Spacer is designed for 2021-2022 Honda Accord (10th Gen Facelift Sedan All Trims Sport, EX, LX) and installs at the right-hand passenger-side front bumper and fender edge mounting area. This support guide retainer helps secure and position the front bumper cover along the passenger-side fender edge. It is suitable for replacing a bracket that is cracked, broken, loose, missing, or damaged during bumper removal, collision repair, or other front-end repair work. This listing includes the Right Passenger Side (RH) single component only – HO1043124 / OEM: 71193-TVA-A11 Core Spec.

Interchange Part Numbers

Please compare the component and reference numbers below with your existing part before ordering.

Key Features

• Right Passenger Side (RH) front bumper support retainer bracket

• Helps support and guide the bumper cover along the fender edge

• Integrated retention points for the corresponding side mounting location

• Suitable for replacing cracked, broken, loose, damaged, or missing retainers

• Useful for bumper replacement, collision repair, and front-end restoration

• Single-component replacement for the corresponding RH mounting position

Technical Fitment Notes

This front bumper support retainer guide bracket is intended specifically for the 2021-2022 facelift 10th Gen Honda Accord configuration. The molded bracket profile, snap-in retention points, and mounting locations are designed to correspond with the right-hand passenger-side fender edge and front bumper corner mounting area, helping maintain proper positioning and support of the bumper cover. Important: This component is intended for the 2021-2022 post-facelift configuration and should not be treated as interchangeable with the 2018-2020 pre-facelift configuration. The earlier models use a different fender-edge alignment and mounting-anchor layout. When matched to the correct vehicle application and mounting configuration, this bracket is designed as a direct replacement-style component without requiring cutting, drilling, or trimming.

Package Includes

• 1 × Front Bumper Right Passenger Side Support Retainer Mounting Spacer

Total: 1 Piece – Right Passenger Side (RH) Only

Important Component Notice

This listing includes only the component specifically stated in the Package Includes section. The left-side bracket and any additional hardware, fasteners, clips, screws, trim pieces, brackets, accessories, or surrounding components that are not specifically listed are not included. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the product description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original bracket, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the Right Passenger Side (RH) component only. Please confirm the installation side, vehicle year, facelift configuration, existing mounting layout, and reference numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Honda Motor Co., Ltd. or American Honda Motor Co., Inc. Honda® and Accord® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, mounting points, installation side, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Overview

Restore the complete front bumper assembly with this 2-piece Front Bumper Cover Kit for compatible 2020-2022 Honda CR-V models. The kit includes a replacement Front Upper Bumper Cover and a matching Front Lower Bumper Valance with a pre-installed center honeycomb mesh grille, providing a convenient solution for repairing or replacing damaged front bumper components. Both components are manufactured to OE-style specifications with factory mounting locations and body contours for a precise fit. The upper bumper cover is supplied in a primed gray/black finish and should be properly prepared and painted before installation. The lower valance features a durable textured matte black finish designed to closely match the original factory appearance. Purchasing both components together helps ensure a consistent fit and appearance while simplifying the repair process. Each kit is securely packaged in a reinforced oversized shipping carton with protective foam inserts to help minimize the risk of shipping damage.

Reference Numbers

What's Included

• Front Upper Bumper Cover

• Front Lower Bumper Valance

• Pre-installed Center Honeycomb Mesh Grille

What's Not Included

The following original vehicle components are not included and must be reused from your existing vehicle or purchased separately if required:

• Upper grille assembly

• Honda emblem

• Fog lamp bezels / covers

• Parking sensors and sensor retainers (if equipped)

• Front bumper reinforcement

• Energy absorber

• Tow hook cover

• Mounting brackets

• Clips, screws, retainers, and other installation hardware

• Any components not specifically listed above

Fitment & Installation

Compatible with North American 2020–2022 Honda CR-V Facelift LX and EX models equipped with the corresponding factory front bumper configuration. This kit is not compatible with 2017–2019 Honda CR-V models due to differences in bumper design, lower valance, and mounting configuration. Before ordering, compare your original part numbers with the reference information above to verify compatibility.Test fit all components before painting or final installation. Professional installation is recommended to ensure proper alignment with adjacent body panels. Products that have been painted, modified, or installed may not qualify for return under the VELNOX Auto Return Policy.

Compatibility Notice

This is an aftermarket replacement product and is not a genuine Honda OEM part. OEM part numbers, Partslink numbers, Hollander interchange numbers, vehicle names, model names, and other manufacturer references are provided solely for product identification and compatibility reference purposes. Honda® and CR-V® are registered trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd. References to Honda®, CR-V®, OEM part numbers, and interchange numbers are used only to identify the intended vehicle application and do not imply any affiliation with or endorsement by the original vehicle manufacturer. Vehicle production dates, trim levels, and factory-installed equipment may affect compatibility. Please verify fitment before placing your order. If you have any questions regarding compatibility, please contact VELNOX Auto before ordering.

Product Overview

Restore the front end with this OE-style Front Bumper Cover Bare Shell, designed as an aftermarket replacement for compatible North American 2019–2021 Honda Civic Sedan and Coupe facelift models. Constructed from flexible automotive-grade plastic, the bumper cover follows the original-style body contour and mounting layout. It is supplied in a primed matte-black finish and requires professional preparation and painting before installation.

Package Includes

The following components are NOT included:

• Upper grille or chrome grille garnish

• Center lower honeycomb grille inserts

• Fog-light bezels or side bumper trim

• Fog lights, bulbs, wiring, or connectors

• Lower chin spoiler or splitter

• Front emblem or license-plate bracket

• Parking sensors or sensor brackets

• Impact absorber or reinforcement beam

• Side mounting brackets

• Clips, retainers, fasteners, or installation hardware

Compatible original components may be transferred from the existing bumper assembly when applicable.

Fitment & Ordering Notice

Designed for compatible North American 2019–2021 Honda Civic Sedan and Coupe facelift models using the matching bumper design.

Applicable body styles:

• Sedan — 4-Door

• Coupe — 2-Door

Applicable configurations may include LX, EX, EX-L, Sport, and Touring.

Does NOT fit:

• Hatchback models

• Type R models

• 2016–2018 pre-facelift models

Before ordering, verify the vehicle year, body style, trim configuration, bumper design, mounting locations, OEM 04711-TBA-A60ZZ, and Partslink HO1000314. Refer to the vehicle fitment chart for complete compatibility information.

Finish & Installation

The bumper cover is supplied primed and unpainted. Professional surface preparation may include cleaning, sanding, primer correction where needed, color matching, and final painting. Primer shade and appearance may vary slightly between production batches. Always test fit the bumper cover and transferred components before painting, drilling, cutting, or permanent modification. Professional installation is recommended. Previous collision damage, worn brackets, or misaligned mounting points may require repair or adjustment before installation. Painted, installed, drilled, cut, damaged, or permanently modified products may not qualify for return under the VELNOX Auto Return Policy.

Folded Shipping & Unboxing Notice

Due to its flexible construction, the bumper cover may be folded-packed inside a reinforced shipping carton to help reduce oversized shipping costs. Temporary bends, waves, or packaging impressions may appear after unpacking and do not necessarily indicate permanent damage.

After Unpacking

1. Remove all protective packaging.

2. Place the bumper cover in a warm, clean area.

3. Allow the panel time to recover its original shape.

4. Apply low, controlled heat gradually and evenly only if necessary.

5. Confirm proper shape and alignment before paint preparation.

Avoid concentrated or excessive heat, which may damage the primer or deform the panel.

Compatibility Disclaimer

This product is an aftermarket replacement component and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model years, trim names, and body-style descriptions are provided solely for product identification and compatibility verification. Honda® and Civic® are registered trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Restore your Honda Accord’s clean, factory-style appearance with this replacement front bumper cover fascia. Designed for the updated facelift body layout, it is ideal for replacing a cracked, scraped, dented, or collision-damaged bumper cover. Its revised design features the wider center grille opening and streamlined side openings used on the facelift front fascia.

Package Includes

• 1x Front Bumper Cover Fascia Bare Shell

• North American Interchange Number: HO1000319

• OEM Reference Number: 71101-TVA-A50ZZ

• Hollander Reference Number: 105-10334

This listing includes the front bumper cover bare shell only.

Grilles, trim moldings, fog-light components, sensors, radar equipment, tow-hook cover, lower spoiler, reinforcement beam, absorber, retainers, brackets, splash shields, license-plate bracket, and mounting hardware are not included. Compatible original components may be transferred from the existing bumper when applicable.

Important Compatibility Note

Designed exclusively for the 2021–2022 facelift front bumper layout. This part does not fit 2018–2020 Honda Accord pre-facelift models, which use a different bumper shape, grille layout, mounting-tab pattern, inner support structure, and surrounding trim configuration.

Paint and Installation Notice

Professional test fitting, surface preparation, painting, and installation are strongly recommended. Confirm the bumper shape, openings, mounting points, and reference numbers before painting or modifying the part. Minor primer variations or light handling marks may occur during manufacturing and shipping and are normally corrected during standard body-shop preparation.

Compatibility Disclaimer

This product is an aftermarket replacement component and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, and trim names are provided solely for product identification and compatibility-reference purposes. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim names are used only to identify compatible vehicle configurations. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Product Overview

Restore a damaged front end with this OE-style Front Bumper Cover Fascia Bare Shell. Designed as a standalone replacement panel for collision repair or exterior restoration, this bumper cover follows the original-style shape and mounting layout for a clean replacement installation.

Package Includes

This listing is for the Front Bumper Cover Bare Shell ONLY.

The following components are not included:

• Front upper grille

• Fog light bezels / covers

• Additional trim or accessories unless specifically stated

Compatible original components may be reused where applicable.

Paint & Installation Notice

The bumper cover is supplied primed and unpainted and requires paint preparation and color matching before final installation. Professional installation is recommended. Always test fit before painting to verify alignment and mounting points. Existing mounting components or previously damaged areas may require adjustment or replacement.

Important Ordering Notice

Before ordering, compare Partslink HO1000302, OEM 04711-TGG-A00ZZ, bumper design, and mounting locations with your original part. Only the component listed under Package Includes is included with your purchase.

Compatibility Disclaimer

This product is an aftermarket replacement component and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, trim names, and body-style descriptions are provided solely for product identification and compatibility verification. Honda® and Civic® are registered trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Product Overview

Restore a damaged front end with this OE-style Front Bumper Cover Fascia Bare Shell, designed as a standalone aftermarket replacement for collision repair and exterior restoration. Constructed from flexible automotive-grade plastic, this replacement panel follows the original-style front body contour and compatible factory-style mounting locations. It is supplied in a primed, unpainted finish for professional paint preparation and color matching.

Package Includes

Bare Shell ONLY – NOT Included

This listing includes the front bumper cover main shell only.

The following components are NOT included:

• Front upper grille or grille garnish

• Fog light bezels / side bumper trim

• Fog lights or related lighting components

• Lower grille / air-intake inserts

• Front emblem or license-plate bracket

• Mounting brackets, retainers, clips, or hardware

• Additional bumper trim or accessories unless specifically stated

Compatible original components may be transferred from the existing bumper assembly when applicable.

Paint & Installation Notice

The bumper cover requires surface preparation, color matching, and final paint before installation. Professional body-shop preparation and installation are recommended. Always test fit the bumper cover and transferred components before painting, drilling, cutting, or permanent modification to confirm alignment and mounting locations. Previous collision damage, worn brackets, damaged retainers, or misaligned mounting areas may require repair or adjustment before installation. Painted, installed, drilled, cut, damaged, or permanently modified products may not qualify for return under the VELNOX Auto Return Policy.

Folded Shipping & Unboxing Notice

Due to its flexible construction, the bumper cover may be professionally folded and securely packed inside a reinforced shipping carton to help reduce oversized-carrier shipping costs. Temporary bends, waves, creases, or packaging impressions may be visible after unpacking. These conditions can result from folded packaging and do not necessarily indicate permanent damage.

After unpacking:

1. Remove all protective packaging.

2. Place the bumper cover in a warm, clean area.

3. Allow the flexible panel sufficient time to recover its molded shape.

4. Apply low, controlled heat gradually and evenly only if necessary.

5. Confirm proper shape and alignment before paint preparation or installation.

Avoid concentrated direct heat, open flame, or overheating, as excessive heat may damage the primer or permanently deform the panel.

Before Ordering

Compare Partslink HO1000322, OEM 04711-TGG-A60ZZ, the original bumper design, and mounting locations before purchase. Confirm that any required grille, fog light bezels, trim, brackets, retainers, or hardware are available for reuse or separate replacement.

Compatibility Disclaimer

This is an aftermarket replacement and restoration package and is not manufactured or supplied by Honda Motor Co., Ltd. OEM reference numbers, North American interchange numbers, vehicle names, trim names and body-style descriptions are provided solely for identification and compatibility reference. Their use does not indicate that these products are genuine Honda OEM parts. Sensor, radar and lighting installation requirements may vary depending on the vehicle’s original wiring and equipment configuration. Buyers should verify compatibility before installation. Honda®, Civic® and related trademarks are the property of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, endorsed by or authorized by Honda Motor Co., Ltd.

Product Overview

This aftermarket front bumper cover is designed for 2014–2016 Nissan Rogue S & SV pre-facelift models, using the non-sensor smooth short-grille front fascia configuration. The bumper cover is molded from durable automotive-grade impact-resistant plastic and supplied in a primed black finish for professional preparation and color matching. Its cleaner short-grille layout is intended to match the corresponding standard-trim Rogue front-end design, making it a practical replacement for bumpers damaged by collisions, cracks, deep scrapes, deformation, or previous repair work.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face / Fascia Shell

Front Fascia Configuration

This bumper cover is intended specifically for 2014–2016 Nissan Rogue S & SV pre-facelift models with the non-sensor smooth short-grille layout. Before ordering, compare the original bumper’s grille opening shape, sensor-hole configuration, side openings, mounting tabs, and overall fascia profile. Rogue bumper designs can vary by trim and equipment package, so the visual layout should match before purchase.

What Is Not Included

This listing includes the front bumper cover shell only. Upper or lower grille components, side inserts or bezels, brackets, retainers, reinforcement parts, lighting components, sensors, emblems, and mounting hardware are not included unless specifically identified in the package contents.

Paint & Body-Shop Preparation

The bumper cover arrives in a primed black, unpainted finish and requires final preparation and painting before installation. Test-fit the fascia prior to paintwork to confirm alignment around the grille opening, fenders, headlights, and mounting locations. Professional surface preparation, color matching, refinishing, and installation are recommended.

Shipping & Shape Recovery

Front bumper covers are flexible exterior body panels and may experience minor temporary flexing during packaging or transit. After unpacking, allow the fascia to rest at room temperature and recover its normal contour before test-fitting or beginning paint preparation.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. Nissan® and Rogue® are registered trademarks of Nissan Motor Co., Ltd. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, front fascia configuration, and existing components before purchase.

Product Overview

Designed for 2014–2016 Nissan Rogue Premium, Luxury & SL pre-facelift models, this front bumper cover is configured for vehicles equipped with pre-molded front parking radar sensor openings. Rather than using the plain non-sensor fascia found on lower trims, this version follows the higher-trim sensor-ready bumper layout, making it a more appropriate replacement when restoring a damaged premium-spec front end. The cover is made from durable automotive-grade impact-resistant plastic and supplied in a primed finish for professional preparation and repainting.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face / Fascia Shell

Sensor-Ready Fitment

This bumper cover is intended for 2014–2016 Nissan Rogue Premium, Luxury & SL trims with the corresponding front parking radar sensor-hole layout. Before ordering, compare the sensor-hole positions, grille opening, lower fascia shape, side openings, mounting tabs, and reference numbers with the bumper currently on the vehicle. The standard S/SV non-sensor fascia uses a different configuration.

What’s Not Included

Only the front bumper cover shell is included. Parking radar sensors, sensor holders or brackets, grille assemblies, side bezels, reinforcement components, lighting parts, emblems, retainers, and installation hardware are not included unless specifically listed in the package contents.

Refinishing & Installation

The bumper cover is supplied in a primed, unpainted finish intended for professional refinishing. Test-fit the fascia before painting, paying particular attention to the sensor openings, grille alignment, fender edges, and mounting locations. Final surface preparation, color matching, painting, and professional installation are recommended.

Packaging Note

The flexible construction of an automotive bumper cover may allow minor temporary movement in shape during shipping. After unpacking, allow the fascia to rest at room temperature and return to its natural contour before fitment checks or paint preparation.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. Nissan® and Rogue® are registered trademarks of Nissan Motor Co., Ltd. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, sensor configuration, and existing components before purchase.

Product Overview

Designed around the distinctive V-Motion front fascia used on 2017–2020 Nissan Rogue S & SV post-facelift models, this aftermarket bumper cover is intended for the corresponding non-sensor standard-trim configuration. Its enlarged center grille opening and sculpted front profile are specific to this generation’s updated styling, making correct fascia selection especially important. Molded from durable automotive-grade impact-resistant plastic, the cover is supplied in a primed black, paintable finish for professional refinishing. A suitable replacement for factory bumpers affected by collision damage, cracks, deep scrapes, deformation, or previous body repair.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Armor Shield Shell

V-Motion Fitment Check

This fascia is intended for 2017–2020 Nissan Rogue S & SV post-facelift models with the non-sensor V-Motion bumper layout. Compare the center grille opening, side openings, bumper contour, sensor-hole layout, mounting tabs, and reference numbers with your original bumper before purchase. Higher-trim or sensor-equipped Rogue front bumper configurations may use a different fascia.

What’s Not Included

This listing includes the front bumper cover shell only. Main and lower grille components, side bezels or inserts, brackets, retainers, sensors, lighting parts, reinforcement components, emblems, and mounting hardware are not included unless specifically listed in the package contents.

Paint & Installation

The bumper cover is supplied in a primed black, unpainted finish and requires final preparation, color matching, and painting before installation. Test-fit the fascia before refinishing to confirm alignment around the grille, headlights, fenders, and mounting points. Professional installation is recommended.

Packaging & Handling

Minor temporary flexing may occur during shipping because bumper covers are large and flexible exterior panels. After unpacking, allow the fascia to rest at room temperature and recover its natural contour before test-fitting or refinishing.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd.  Nissan® and Rogue® are registered trademarks of Nissan Motor Co., Ltd. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, front fascia configuration, and existing components before purchase.

Product Overview

Designed for 2017–2020 Nissan Rogue SL, Premium & Hybrid post-facelift models, this aftermarket front bumper cover features two pre-molded parking sensor holes for the corresponding high-trim front fascia configuration. Made from durable automotive-grade impact-resistant plastic, the fascia is supplied in a primed black, paintable finish for professional refinishing. Its sensor-ready layout is suited for replacing a cracked, scraped, deformed, collision-damaged, or previously repaired original bumper cover.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

2-Sensor Fitment Configuration

This bumper cover is intended for 2017–2020 Nissan Rogue SL, Premium & Hybrid models using the 2-sensor post-facelift front bumper layout. Before ordering, compare the sensor-hole count and placement, grille opening, side openings, fascia contour, mounting tabs, and reference numbers with your original bumper. S/SV non-sensor bumper configurations use a different front fascia and should not be treated as interchangeable.

What’s Not Included

This listing includes the front bumper cover shell only. Parking sensors, sensor retainers or brackets, grille assemblies, side bezels or inserts, reinforcement parts, lighting components, emblems, mounting hardware, and other surrounding front bumper parts are not included unless specifically stated in the package contents.

Refinishing & Installation

The fascia is supplied in a primed black, unpainted finish and requires final preparation and painting before installation. Test-fit before refinishing to verify sensor positioning, grille alignment, fender-edge fitment, and mounting locations. Professional installation is recommended.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. Nissan® and Rogue® are registered trademarks of Nissan Motor Co., Ltd. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, sensor configuration, and existing components before purchase.

Product Overview

Created for the 2021–2023 Nissan Rogue S & SV on the T33 new-generation platform, this aftermarket front bumper cover follows the distinctive layered V-opening fascia layout used on the standard-trim front end. The shell is formed from durable automotive-grade exterior plastic and supplied in a paintable black finish for professional surface preparation and refinishing. Its T33-specific shape is intended to restore the correct front fascia profile when the original bumper has been damaged by impact, cracking, scraping, deformation, or prior body repair.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

T33 Layered-V Configuration

This bumper cover is intended for 2021–2023 Nissan Rogue S & SV models using the T33 layered V-opening front fascia design. Before ordering, compare the center opening layout, side fascia contours, sensor-hole configuration, mounting tabs, and overall bumper shape with your original part. Different trims or sensor-equipped front bumper versions may use another fascia design.

What’s Not Included

This listing includes the front bumper cover shell only. Main grille components, lower grille inserts, side bezels, brackets, retainers, reinforcement parts, sensors, lighting components, emblems, and mounting hardware are not included unless specifically listed in the package contents.

Paint & Installation

The bumper cover is supplied in a paintable black finish and requires final preparation and refinishing to match the vehicle. Test-fit the fascia before painting to confirm alignment around the grille openings, headlights, fender edges, and mounting points. Professional body-shop refinishing and installation are recommended.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. Nissan® and Rogue® are registered trademarks of Nissan Motor Co., Ltd. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, front fascia configuration, and existing components before purchase.

Product Overview

Engineered for 2021–2023 Nissan Rogue SL & Platinum models on the T33 platform, this aftermarket front bumper cover is built around the high-trim parking-sensor fascia configuration. Its sensor-ready layout is shaped for the corresponding premium front-end design, while the paintable black shell provides a clean base for professional refinishing. This makes it a suitable replacement for original bumpers with collision damage, cracks, deep scraping, deformation, or prior repair work.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

High-Trim Sensor Configuration

This fascia is intended for 2021–2023 Nissan Rogue SL & Platinum T33 models using the corresponding front parking-sensor bumper layout. Before ordering, compare the sensor-hole pattern, center opening design, side contours, mounting tabs, and overall fascia shape with the original bumper on your vehicle. Standard S/SV non-sensor versions use a different front bumper configuration and should not be treated as interchangeable.

Components Not Included

This listing includes the front bumper cover shell only. Parking sensors, sensor retainers or brackets, grille components, side inserts, lighting parts, reinforcement components, emblems, mounting hardware, and other surrounding front-end parts are not included unless specifically listed in the package contents.

Refinishing & Installation

The bumper cover is supplied in a paintable black finish intended for professional preparation and refinishing. Test-fit before painting to verify the sensor openings, grille alignment, fender-edge fitment, and mounting locations. Professional body-shop refinishing and installation are recommended for the best finished appearance.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. Nissan® and Rogue® are registered trademarks of Nissan Motor Co., Ltd. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, sensor configuration, and existing components before purchase.

Product Overview

Restore the front-end appearance of your Toyota Camry with this premium aftermarket front bumper cover replacement, designed specifically for 2012–2014 Toyota Camry High-End SE & Sport trim configurations. Manufactured from durable automotive-grade impact-resistant plastic, this bumper fascia comes in a primed black ready-to-paint finish, providing a clean surface for professional color matching before installation. Ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover, this standalone fascia shell helps restore the vehicle’s clean factory-inspired front-end appearance.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

What’s Not Included

This listing includes the front bumper cover fascia shell only. Grilles, trim moldings, brackets, retainers, reinforcement components, lighting parts, emblems, mounting hardware, and other surrounding bumper accessories are not included unless specifically stated in the package contents.

Before You Order

Please verify your vehicle year, trim configuration, bumper design, and reference numbers before purchasing. This bumper cover is designed specifically for 2012–2014 Toyota Camry High-End SE & Sport trims and is not intended for Standard LE or Luxury XLE bumper configurations.

Paint & Installation Notice

This bumper cover is supplied in a primed, unpainted finish and requires surface preparation and painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, the part may be packaged in a space-efficient manner for shipping. Minor temporary flexing or shape variation may occur during transit. Allow the bumper cover to rest at room temperature before test-fitting and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Camry® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore your Toyota Camry’s front-end appearance with this aftermarket front bumper cover replacement, designed specifically for 2012–2014 Toyota Camry Standard LE & Luxury XLE trim configurations. Constructed from durable automotive-grade impact-resistant plastic, this standalone fascia shell is supplied in a primed finish ready for professional preparation, painting, and color matching. Ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

What’s Not Included

This listing includes the front bumper cover fascia shell only. Grilles, trim moldings, brackets, retainers, reinforcement components, lighting parts, emblems, mounting hardware, and other surrounding bumper accessories are not included unless specifically stated in the package contents.

Before You Order

Please verify your vehicle year, trim configuration, bumper design, and reference numbers before purchasing. This bumper cover is designed specifically for 2012–2014 Toyota Camry Standard LE & Luxury XLE trims and does not fit High-End SE or Sport bumper configurations.

Paint & Installation Notice

This bumper cover is supplied in a primed, unpainted finish and requires surface preparation and painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, temporary flexing or minor shape variation may occur during shipping. Allow the bumper cover to rest at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Camry® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Designed as a replacement for the standard LE & mid-trim XLE front bumper configuration, this aftermarket bumper cover offers a clean solution for repairing accident damage, deep scratches, cracks, or deterioration to the original fascia. The shell is formed from durable automotive-grade impact-resistant plastic and supplied with a primed black surface, allowing the body shop or installer to complete final preparation and paint matching for the vehicle. Its trim-specific profile is intended to retain the correct bumper contour and surrounding component layout.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

Application Verification

Fitment should be confirmed against the vehicle’s trim level, original bumper profile, grille openings, side openings, mounting locations, and reference numbers before purchase. This version is intended for the corresponding LE & XLE standard-style front bumper layout. Other trim packages may use a different fascia design even when the vehicle body appears similar.

Items Sold Separately

Only the front bumper cover fascia shell is included with this listing. Grilles, bumper inserts, side bezels, brackets, retainers, reinforcement parts, lighting components, sensors, emblems, and mounting hardware are sold separately unless specifically identified as included.

Surface Preparation & Installation

The primed black finish is a preparation surface, not the final vehicle color. Test-fit the bumper before refinishing to confirm alignment with the surrounding panels and attachment points. Final sanding or surface preparation, paint matching, and professional refinishing are required prior to installation. Body-shop installation is recommended for the best fit and finished appearance.

Handling After Delivery

Automotive bumper covers are flexible by design. Temporary movement or slight distortion can occur while the panel is packaged and transported. Once unpacked, allow the bumper cover to rest at room temperature and regain its normal contour before test-fitting or beginning paint preparation.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and related vehicle trademarks are the property of Toyota Motor Corporation. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, and existing components before purchase.

Product Overview

Restore your Toyota Corolla’s front-end appearance with this aftermarket front bumper cover replacement, designed specifically for 2014–2016 Toyota Corolla S & Special Edition pre-facelift trims. Constructed from durable automotive-grade impact-resistant plastic, this front bumper fascia shell features a primed black finish and is ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

Before You Order

Please verify your vehicle year, trim configuration, front bumper design, and reference numbers before purchasing. Compare the bumper shape, grille and bezel openings, mounting points, and reference numbers with your existing part to confirm compatibility. Designed specifically for 2014–2016 Toyota Corolla S & Special Edition pre-facelift trims. Not intended for L, LE, LE Eco, or other bumper configurations.

What’s Not Included

This listing includes the front bumper cover fascia shell only. Upper and lower grille components, side inserts or bezels, brackets, retainers, reinforcement components, lighting parts, and mounting hardware are not included unless specifically stated in the package contents.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Corolla® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, interchange numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore your Toyota Corolla’s front-end appearance with this aftermarket front bumper cover replacement, designed specifically for 2014–2016 Toyota Corolla L, LE & LE Eco pre-facelift models. Constructed from durable automotive-grade impact-resistant plastic, this front bumper fascia shell features a primed black finish and is ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover. Suitable for collision repair, cosmetic restoration, and body shop replacement applications, this standalone fascia shell provides a clean foundation for professional refinishing and installation.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

Before You Order

Please verify your vehicle year, trim configuration, front bumper design, and reference numbers before purchasing. Compare the bumper shape, grille and bezel openings, mounting points, and reference numbers with your existing part to confirm compatibility. Designed specifically for 2014–2016 Toyota Corolla L, LE & LE Eco pre-facelift models. Not intended for other bumper or trim configurations.

What’s Not Included

This listing includes the front bumper cover fascia shell only. Upper and lower grille components, side inserts or bezels, trim moldings, brackets, retainers, reinforcement components, lighting parts, and mounting hardware are not included unless specifically stated in the package contents.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Corolla® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, interchange numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore your Toyota Camry’s front exterior appearance with this aftermarket front bumper cover replacement, designed specifically for 2015–2017 Toyota Camry SE & XSE trim configurations. Constructed from durable automotive-grade impact-resistant plastic, this standalone fascia shell features a primed black, ready-to-paint finish. Ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

Before You Order

Please verify your vehicle year, trim configuration, front bumper design, and reference numbers before purchasing. Designed specifically for 2015–2017 Toyota Camry SE & XSE trims. Does not fit LE or XLE bumper configurations.

What’s Not Included

This listing includes the front bumper cover fascia shell only. Grilles, trim moldings, brackets, retainers, reinforcement components, lighting parts, mounting hardware, and other surrounding bumper accessories are not included unless specifically stated in the package contents.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Camry® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore your Toyota Camry’s front-end appearance with this aftermarket front bumper cover replacement, designed specifically for 2015–2017 Toyota Camry LE & XLE trim configurations. Constructed from durable automotive-grade impact-resistant plastic, this standalone fascia shell features a primed black, ready-to-paint finish and is ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

Before You Order

Please verify your vehicle year, trim configuration, front bumper design, and reference numbers before purchasing. Designed specifically for 2015–2017 Toyota Camry LE & XLE trims. Does not fit SE or XSE bumper configurations.

What’s Not Included

This listing includes the front bumper cover fascia shell only. Grilles, trim moldings, brackets, retainers, reinforcement components, lighting parts, and mounting hardware are not included unless specifically stated in the package contents.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation.Toyota® and Camry® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Description

This Front Bumper Cover Replacement is designed for 2016-2018 Nissan Altima Base S, SR, SV, and SL trims with the mid-cycle facelift front-end configuration and smooth non-sensor bumper layout. This bumper cover serves as the exterior front fascia shell and is suitable for replacing a cracked, scraped, dented, deformed, or collision-damaged original bumper cover. Its molded profile corresponds with the facelift grille opening, headlight-side contours, and surrounding mounting areas. This listing includes the standalone 1-piece front bumper cover shell only – NI1000305 / OEM: 52119-9HS0A Core Spec.

Interchange Part Numbers

Please compare your vehicle trim, bumper configuration, and reference numbers with the information below before ordering.

Key Features

• Standalone 1-piece front bumper cover replacement shell

• Designed for 2016-2018 Nissan Altima mid-cycle facelift models

• Suitable for Base S, SR, SV, and SL trim applications

• Smooth non-sensor front bumper configuration

• Molded fascia profile for the corresponding grille and headlight-side layout

• Primed black surface ready for proper paint preparation and refinishing

• Suitable for collision repair, exterior restoration, and damaged bumper replacement

Technical Fitment Notes

This front bumper cover is intended specifically for the 2016-2018 Nissan Altima mid-cycle facelift configuration. The molded fascia profile is designed around the corresponding facelift front-end layout, including the grille opening, headlight-side contours, lower fascia structure, and mounting locations. Important: This bumper cover is intended for the smooth non-sensor configuration. It should not be treated as interchangeable with bumper covers that are factory-molded with parking sensor openings or other different front fascia configurations. This component is also intended for the 2016-2018 facelift design and should not be treated as interchangeable with the earlier 2013-2015 pre-facelift front bumper configuration, which uses a different fascia shape and mounting layout. When matched to the correct vehicle application and bumper configuration, this cover is designed as a direct replacement-style body component for the corresponding mounting locations.

Package Includes

• 1 × Front Bumper Cover Face Shell

Total: 1 Piece – Standalone Front Bumper Cover Shell Only

Important Component Notice

This listing includes only the front bumper cover shell specifically stated in the Package Includes section. Grilles, grille inserts, trim pieces, emblems, parking sensors, sensor hardware, brackets, retainers, absorber components, reinforcement bars, fog light components, fasteners, clips, and other surrounding parts are not included unless specifically stated otherwise. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the Product Description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original bumper cover, vehicle trim, front fascia configuration, sensor layout, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the 2016-2018 mid-cycle facelift smooth non-sensor configuration. Please confirm your vehicle year, Base S / SR / SV / SL trim application, existing bumper layout, and corresponding reference number before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. or Nissan North America, Inc. Nissan® and Altima® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, sensor configuration, mounting points, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Description

This Front Bumper Cover Replacement is designed for 2016-2018 Nissan Altima Limited/SL/Platinum Trims with the mid-cycle facelift front-end configuration, pre-molded 2 intelligent front parking radar sensor holes, and tow eye slot. The bumper cover serves as the exterior front fascia shell and is suitable for replacing a cracked, scraped, dented, deformed, or collision-damaged original bumper cover. Its molded profile is designed to correspond with the specified facelift front-end layout while retaining the required sensor openings and tow eye slot configuration. This listing includes the standalone front bumper cover shell only – NI1000306 / OEM: 52119-9HS0H Core Spec, finished in automotive-grade primed black.

Interchange Part Numbers

Please compare your vehicle trim, bumper configuration, sensor layout, and reference numbers with the information below before ordering.

Key Features

• Standalone 1-piece front bumper cover replacement shell

• Designed for 2016-2018 Nissan Altima Limited/SL/Platinum trims

• Mid-cycle facelift front fascia configuration

• Pre-molded with 2 front parking radar sensor holes

• Integrated tow eye slot configuration

• Automotive-grade primed black surface

• Molded profile for the corresponding bumper, grille, and surrounding mounting layout

• Suitable for collision repair, exterior restoration, and damaged bumper replacement

Technical Fitment Notes

This front bumper cover is intended specifically for the 2016-2018 Nissan Altima Limited/SL/Platinum mid-cycle facelift configuration. The fascia profile incorporates 2 pre-molded front parking radar sensor holes and a tow eye slot as part of the bumper shell design. These configuration details are important when comparing this replacement with the existing bumper on the vehicle. Important: This bumper cover is intended for Limited/SL/Platinum Trims with the corresponding 2 front parking radar sensor hole and tow eye slot configuration. It should not be treated as interchangeable with a smooth non-sensor bumper cover or another fascia configuration that uses a different opening or mounting layout. When matched to the correct vehicle and bumper configuration, this cover is designed as a direct replacement-style exterior body component for the corresponding mounting locations.

Package Includes

• 1 × Front Bumper Cover Face Shell

Total: 1 Piece – Standalone Front Bumper Cover Shell Only

Important Component Notice

This listing includes only the front bumper cover shell specifically stated in the Package Includes section. Parking radar sensors, sensor hardware, tow eye components, tow eye cover, grilles, grille inserts, trim pieces, emblems, brackets, retainers, absorber components, reinforcement bars, fog light components, fasteners, clips, and other surrounding parts are not included unless specifically stated otherwise. The bumper cover includes the described pre-molded sensor holes and tow eye slot only. Electronic sensors and related components are not included. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the Product Description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original bumper cover, vehicle trim, front fascia configuration, parking sensor layout, tow eye slot, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the 2016-2018 Nissan Altima Limited/SL/Platinum mid-cycle facelift configuration with 2 front parking radar sensor holes and tow eye slot. Please confirm these features and the listed interchange numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. or Nissan North America, Inc. Nissan® and Altima® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, sensor configuration, tow eye configuration, mounting points, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Overview

Built for the more aggressive front-end layout used on 2016–2018 Toyota RAV4 SE, Limited & Adventure post-facelift models, this aftermarket bumper cover is designed as a replacement for damaged or worn factory fascia panels. The bumper shell is molded from durable automotive-grade impact-resistant plastic and features a primed black surface for professional preparation and painting. Its trim-specific design incorporates the pre-molded lower tab and slotted mounting track configuration required for the corresponding sport and premium bumper layout.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

Fitment & Configuration Check

This bumper cover is intended specifically for 2016–2018 Toyota RAV4 SE, Limited & Adventure post-facelift configurations using the corresponding lower tab and slotted track mounting layout. Before ordering, compare the bumper contour, grille openings, lower mounting tracks, side openings, attachment points, and reference numbers with the original part on your vehicle. LE, XLE, or other standard-style bumper layouts may use a different fascia.

Components Sold Separately

This listing includes the front bumper cover fascia shell only. Upper and lower grille components, side bezels or inserts, trim pieces, brackets, retainers, reinforcement components, lighting parts, sensors, emblems, and mounting hardware are not included unless specifically identified in the package contents.

Paint Preparation & Installation

The supplied primed black finish is intended for professional refinishing and is not the vehicle’s final exterior color.Test-fit the bumper before painting to confirm alignment with the grille openings, lower mounting tracks, surrounding body panels, and attachment points. Professional surface preparation, paint matching, refinishing, and installation are recommended.

Shipping & Handling

As a large flexible exterior body panel, the bumper cover may experience minor temporary flexing during packaging or transportation. Allow the part to rest at room temperature and recover its natural contour before test-fitting, preparation, or painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and RAV4® are registered trademarks of Toyota Motor Corporation. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, bumper configuration, and existing components before purchase.

Product Overview

Built for the 2016–2018 Toyota RAV4 LE & XLE post-facelift front bumper layout, this aftermarket bumper cover provides a clean replacement option for vehicles with cracked, scraped, impact-damaged, or previously repaired front fascia panels. The shell is manufactured from durable automotive-grade impact-resistant plastic and comes in a primed black finish for professional preparation and repainting. Its trim-specific contour is designed to match the standard LE/XLE front-end configuration while providing a solid foundation for collision repair or cosmetic restoration.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

Application Check

This bumper cover is intended for 2016–2018 Toyota RAV4 LE & XLE post-facelift configurations. Before ordering, compare the overall bumper profile, grille openings, side insert areas, mounting points, and reference numbers with your original part. Limited or other trim-specific front bumper layouts may use a different fascia design.

Parts Not Included

This listing includes the front bumper cover shell only. Grilles, side bezels or inserts, brackets, retainers, reinforcement components, lighting parts, sensors, emblems, mounting hardware, and other surrounding front bumper components are not included unless specifically stated in the package contents.

Paint Preparation & Installation

The bumper cover is supplied in a primed black, unpainted finish intended for professional refinishing. Test-fit the fascia before painting to verify alignment with the surrounding panels and mounting locations. Final surface preparation, color matching, painting, and professional installation are recommended for the best finished result.

Packaging & Handling

Because bumper covers are large and flexible exterior panels, minor temporary flexing may occur during packaging or transportation. After unpacking, allow the part to rest at room temperature and return to its normal contour before test-fitting or beginning refinishing work.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and RAV4® are registered trademarks of Toyota Motor Corporation. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, and existing components before purchase.

Product Description

This Front Bumper Cover Replacement is designed for 2016-2019 Nissan Sentra SL, Nismo, and Premium Trims Only with the 7th Gen post-facelift front-end configuration and pre-molded front parking radar sensor holes. The bumper cover serves as the exterior front fascia shell and is suitable for replacing a cracked, scraped, dented, deformed, or collision-damaged original front bumper cover. Its molded profile is designed to correspond with the specified post-facelift front-end contours while retaining the required sensor-hole configuration. This listing includes the standalone front bumper cover shell only – NI1000315 / OEM: 62022-4FU1H, finished in primed black.

Interchange Part Numbers

Please compare your vehicle trim, front bumper configuration, sensor layout, and reference numbers with the information below before ordering.

Key Features

• Standalone 1-piece front bumper cover replacement shell

• Designed for 2016-2019 Nissan Sentra SL, Nismo, and Premium trims

• 7th Gen post-facelift front fascia configuration

• Pre-molded front parking radar sensor holes

• Primed black surface ready for proper paint preparation and refinishing

• Molded profile for the corresponding front fascia and mounting layout

• Suitable for collision repair, exterior restoration, and damaged bumper replacement

Technical Fitment Notes

This front bumper cover is intended specifically for the 2016-2019 Nissan Sentra 7th Gen post-facelift SL, Nismo, and Premium configuration. The molded fascia profile incorporates pre-molded front parking radar sensor holes as part of the bumper shell design. These openings are an important configuration detail when comparing this replacement with the existing front bumper cover. Important: This bumper cover is intended for vehicles equipped with the corresponding front parking radar sensor hole configuration. It should not be treated as interchangeable with a smooth non-sensor bumper cover or another fascia configuration that uses a different sensor-hole or mounting layout. When matched to the correct vehicle, trim, and bumper configuration, this cover is designed as a direct replacement-style exterior body component for the corresponding mounting locations.

Package Includes

• 1 × Front Bumper Cover Face Shell

Total: 1 Piece – Standalone Front Bumper Cover Shell Only

Important Component Notice

This listing includes only the front bumper cover shell specifically stated in the Package Includes section. Parking radar sensors, sensor hardware, grilles, grille inserts, trim pieces, emblems, brackets, retainers, absorber components, reinforcement bars, fog light components, fasteners, clips, and other surrounding parts are not included unless specifically stated otherwise. The bumper cover includes the described pre-molded sensor holes only. Electronic sensors and related hardware are not included. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the Product Description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original front bumper cover, vehicle trim, front fascia configuration, parking sensor layout, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the 2016-2019 Nissan Sentra SL, Nismo, and Premium 7th Gen post-facelift configuration with pre-molded front parking radar sensor holes. Please confirm these features and the listed interchange numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. or Nissan North America, Inc. Nissan® and Sentra® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, sensor configuration, mounting points, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Description

This Front Bumper Cover Replacement is designed for 2016-2019 Nissan Sentra Standard Base S and SV Trims Only with the 7th Gen post-facelift front-end configuration and smooth non-sensor V-Motion grille layout. The bumper cover serves as the exterior front fascia shell and is suitable for replacing a cracked, scraped, dented, deformed, or collision-damaged original front bumper cover. Its molded profile is designed to correspond with the specified post-facelift grille opening, front fascia contours, and surrounding mounting areas. This listing includes the standalone front bumper cover shell only – NI1000314 / OEM: 62022-4FU0H Core Spec, finished in primed black.

Interchange Part Numbers

Please compare your vehicle trim, front bumper configuration, sensor layout, and reference numbers with the information below before ordering.

Key Features

• Standalone 1-piece front bumper cover replacement shell

• Designed for 2016-2019 Nissan Sentra Base S and SV trims

• 7th Gen post-facelift front fascia configuration

• Smooth non-sensor bumper layout

• V-Motion grille front-end configuration

• Primed black surface ready for proper paint preparation and refinishing

• Suitable for collision repair, exterior restoration, and damaged bumper replacement

Technical Fitment Notes

This front bumper cover is intended specifically for the 2016-2019 Nissan Sentra 7th Gen post-facelift configuration. The molded fascia profile is designed around the corresponding post-facelift front-end layout, including the V-Motion grille opening, front corner contours, lower fascia structure, and mounting locations. Important: This bumper cover is intended for the smooth non-sensor configuration. It should not be treated as interchangeable with bumper covers that use factory-molded parking sensor openings or another front fascia configuration with different openings or mounting layouts. When matched to the correct vehicle, trim, and bumper configuration, this cover is designed as a direct replacement-style exterior body component for the corresponding mounting locations.

Package Includes

• 1 × Front Bumper Cover Face Shell

Total: 1 Piece – Standalone Front Bumper Cover Shell Only

Important Component Notice

This listing includes only the front bumper cover shell specifically stated in the Package Includes section. Grilles, grille inserts, trim pieces, emblems, parking sensors, sensor hardware, brackets, retainers, absorber components, reinforcement bars, fog light components, fasteners, clips, and other surrounding parts are not included unless specifically stated otherwise. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the Product Description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original front bumper cover, vehicle trim, front fascia configuration, sensor layout, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the 2016-2019 Nissan Sentra Standard Base S and SV 7th Gen post-facelift smooth non-sensor configuration. Please confirm your vehicle trim, existing bumper layout, and listed interchange numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. or Nissan North America, Inc. Nissan® and Sentra® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, sensor configuration, mounting points, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.