Products

Product Overview

Upgrade the front appearance of your Corolla with this aftermarket front bumper cover, designed for 2017–2019 Toyota Corolla SE & XSE facelift models. Made from durable automotive-grade impact-resistant plastic, this fascia shell comes in a primed black finish for professional preparation and painting. It is well suited for replacing a cracked, scraped, collision-damaged, or previously repaired factory bumper cover while preserving the sharper SE/XSE front-end styling.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

Fitment Check Before Purchase

Please confirm your vehicle year, SE/XSE trim configuration, bumper profile, grille and bezel openings, mounting locations, and reference numbers before ordering. This bumper cover is designed specifically for 2017–2019 Toyota Corolla SE & XSE facelift configurations and is not intended for LE, XLE, or other bumper layouts.

What’s Not Included

This listing includes the front bumper cover fascia shell only. Upper and lower grille components, side inserts or bezels, brackets, retainers, reinforcement components, lighting parts, mounting hardware, and other surrounding front bumper accessories are not included unless specifically listed in the package contents.

Paint & Installation Notice

The bumper cover is supplied in a primed black, unpainted finish and requires final surface preparation, paint matching, and refinishing before installation. Test-fitting before painting is strongly recommended. Professional body-shop preparation and installation are recommended to help ensure proper alignment and finish quality.

Shipping & Packaging Note

Because automotive bumper covers are large and flexible, minor temporary flexing may occur during transportation.  After unpacking, allow the bumper cover to rest at room temperature and recover its natural shape before test-fitting, preparation, or painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Corolla® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Refresh the front appearance of your Toyota Corolla with this direct-fit aftermarket bumper cover, engineered for LE & XLE trim configurations. Built from durable automotive-grade impact-resistant plastic, this 1-piece fascia shell comes in a primed black finish and is ready for professional surface preparation and painting. It offers a clean replacement solution for worn, cracked, scraped, or collision-damaged factory bumper covers while maintaining the vehicle’s original front-end styling.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

Before You Order

Please verify your vehicle year, trim configuration, front bumper design, and reference numbers before purchasing. Compare the bumper shape, grille and bezel openings, mounting points, and reference numbers with your existing part to confirm compatibility. Designed specifically for Toyota Corolla LE & XLE bumper configurations. Not intended for other bumper or trim configurations.

What’s Not Included

This listing includes the front bumper cover fascia shell only. Upper and lower grille components, side inserts or bezels, brackets, retainers, reinforcement components, lighting parts, and mounting hardware are not included unless specifically stated in the package contents.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Corolla® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, interchange numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore your Toyota Camry’s front-end appearance with this aftermarket front bumper cover replacement, designed specifically for 2018–2020 Toyota Camry SE & XSE pre-facelift models. Constructed from durable automotive-grade impact-resistant plastic, this standalone fascia shell features a primed black finish and is ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

Before You Order

Please verify your vehicle year, trim configuration, front bumper design, and reference numbers before purchasing. Designed specifically for 2018–2020 Toyota Camry SE & XSE pre-facelift models. Does not fit LE or XLE bumper configurations.

What’s Not Included

This listing includes the front bumper cover fascia shell only. Upper and lower grilles, fog light bezels, trim moldings, brackets, retainers, reinforcement components, lighting parts, and mounting hardware are not included unless specifically stated in the package contents.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Camry® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore your Toyota Camry’s front-end appearance with this aftermarket front bumper cover replacement, designed specifically for 2018–2020 Toyota Camry LE & XLE pre-facelift models. Constructed from durable automotive-grade impact-resistant plastic, this front bumper fascia shell features a primed black finish and is ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover. Suitable for collision repair, cosmetic restoration, and body shop replacement applications, this standalone fascia shell provides a clean foundation for professional refinishing and installation.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

Before You Order

Please verify your vehicle year, trim configuration, front bumper design, and reference numbers before purchasing. Compare the bumper shape, grille and bezel openings, mounting points, and reference numbers with your existing part to confirm compatibility. Designed specifically for 2018–2020 Toyota Camry LE & XLE pre-facelift models. Does not fit SE or XSE bumper configurations.

What’s Not Included

This listing includes the front bumper cover fascia shell only. Upper and lower grille components, side inserts or bezels, trim moldings, brackets, retainers, reinforcement components, lighting parts, and mounting hardware are not included unless specifically stated in the package contents.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Camry® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, interchange numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

This aftermarket front bumper cover is configured for 2019–2021 Toyota RAV4 Limited pre-facelift models equipped with two front parking radar sensor holes. Manufactured from durable automotive-grade impact-resistant plastic, the fascia is supplied in a primed black finish for professional preparation and refinishing. The pre-molded dual-sensor layout is intended to match the corresponding Limited-trim front bumper configuration, making it suitable for collision repair, cosmetic restoration, or replacement of a damaged original fascia.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

Radar & Fitment Verification

This bumper cover is intended specifically for 2019–2021 Toyota RAV4 Limited pre-facelift configurations with two pre-molded front parking radar sensor holes. Before purchase, compare the sensor-hole count and placement, grille openings, lower fascia profile, side openings, mounting points, and reference numbers with your original bumper. Non-sensor versions or other trim configurations may use a different front fascia.

Components Not Included

This listing includes the front bumper cover fascia shell only. Parking radar sensors, sensor retainers or brackets, grille components, side bezels or inserts, reinforcement parts, lighting components, emblems, mounting hardware, and other surrounding bumper accessories are not included unless specifically stated in the package contents.

Finish & Installation

The bumper cover is supplied with a primed black surface intended for professional painting and refinishing. Test-fit the fascia before paintwork to confirm sensor-hole positioning, grille alignment, and mounting-point fitment. Proper surface preparation, color matching, refinishing, and professional installation are recommended.

Packaging & Handling

Because front bumper fascia panels are large and flexible, minor temporary flexing may occur during packaging or transportation. After unpacking, allow the bumper cover to rest at room temperature and return to its natural contour before test-fitting or beginning paint preparation.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and RAV4® are registered trademarks of Toyota Motor Corporation. Vehicle names, trademarks, OEM numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, sensor configuration, and existing components before purchase.

Product Overview

This aftermarket front bumper cover is made for 2019–2021 Toyota RAV4 LE & XLE pre-facelift models without front sensor holes, providing the correct standard-trim fascia configuration for repair or replacement work. Manufactured from durable automotive-grade impact-resistant plastic, the bumper arrives in a primed black finish ready for professional surface preparation and painting. It is a suitable replacement for original fascia panels affected by collision damage, cracks, deep scratches, deformation, or previous repair work.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

Fitment & Sensor Configuration

This bumper cover is intended for 2019-2021 Toyota RAV4 LE & XLE pre-facelift configurations without pre-molded sensor holes. Before ordering, compare your original bumper’s sensor-hole layout, grille openings, side openings, overall contour, mounting locations, and reference numbers. Sensor-equipped or other trim-specific fascia designs may require a different bumper cover.

Components Sold Separately

This listing includes the front bumper cover fascia shell only. Grille assemblies, side bezels or inserts, sensor components, brackets, retainers, reinforcement parts, lighting components, emblems, mounting hardware, and other surrounding bumper parts are not included unless specifically listed in the package contents.

Paint Preparation & Installation

The supplied primed black surface is intended for professional refinishing and is not a final exterior paint finish. Test-fit the bumper before painting to confirm proper alignment with surrounding panels, grille openings, and mounting locations. Final surface preparation, color matching, painting, and professional installation are recommended.

Packaging & Handling

Front bumper covers are flexible exterior body panels and may experience minor temporary flexing while packaged or transported. After unpacking, allow the bumper to rest at room temperature and regain its normal contour before test-fitting or beginning refinishing work.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and RAV4® are registered trademarks of Toyota Motor Corporation. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, sensor configuration, and existing components before purchase.

Product Description

This Front Bumper Cover Replacement is designed for 2019-2022 Nissan Altima Limited, SL, and Platinum Trims Only with the 6th Gen pre-facelift front-end configuration and pre-molded 2 intelligent front parking radar sensor holes. The bumper cover serves as the exterior front fascia shell and is suitable for replacing a cracked, scraped, dented, deformed, or collision-damaged original bumper cover. Its molded profile is designed to correspond with the specified pre-facelift front-end layout while retaining the required sensor-hole configuration. This listing includes the standalone front bumper cover shell only – NI1000373 / OEM: 62022-6CA1H, finished in primed black.

Interchange Part Numbers

Please compare your vehicle trim, front bumper configuration, sensor layout, and reference numbers with the information below before ordering.

Key Features

• Standalone 1-piece front bumper cover replacement shell

• Designed for 2019-2022 Nissan Altima Limited, SL, and Platinum trims

• 6th Gen pre-facelift front fascia configuration

• Pre-molded with 2 front parking radar sensor holes

• Primed black surface ready for proper paint preparation and refinishing

• Molded profile for the corresponding front bumper and surrounding mounting layout

• Suitable for collision repair, exterior restoration, and damaged bumper replacement

Technical Fitment Notes

This front bumper cover is intended specifically for the 2019-2022 Nissan Altima 6th Gen pre-facelift Limited, SL, and Platinum configuration. The molded fascia profile incorporates 2 pre-molded front parking radar sensor holes as part of the bumper shell design. These openings are an important configuration detail when comparing this replacement with the existing front bumper cover. Important: This bumper cover is intended for vehicles equipped with the corresponding 2 front parking radar sensor hole configuration. It should not be treated as interchangeable with a smooth non-sensor bumper cover or another fascia configuration that uses a different sensor-hole or mounting layout. When matched to the correct vehicle and bumper configuration, this cover is designed as a direct replacement-style exterior body component for the corresponding mounting locations.

Package Includes

• 1 × Front Bumper Cover Face Shell

Total: 1 Piece – Standalone Front Bumper Cover Shell Only

Important Component Notice

This listing includes only the front bumper cover shell specifically stated in the Package Includes section. Parking radar sensors, sensor hardware, grilles, grille inserts, trim pieces, emblems, brackets, retainers, absorber components, reinforcement bars, fog light components, fasteners, clips, and other surrounding parts are not included unless specifically stated otherwise. The bumper cover includes the described 2 pre-molded front parking radar sensor holes only. Electronic sensors and related hardware are not included. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the Product Description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original bumper cover, vehicle trim, front fascia configuration, parking sensor layout, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the 2019-2022 Nissan Altima Limited, SL, and Platinum 6th Gen pre-facelift configuration with 2 front parking radar sensor holes. Please confirm these features and the listed interchange numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. or Nissan North America, Inc. Nissan® and Altima® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, sensor configuration, mounting points, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Description

This Front Bumper Cover Replacement is designed for 2019-2022 Nissan Altima Standard S, SR, and SV Trims Only with the 6th Gen pre-facelift front-end configuration and flush smooth non-sensor Giant V-Motion bumper layout. The bumper cover serves as the exterior front fascia shell and is suitable for replacing a cracked, scraped, dented, deformed, or collision-damaged original bumper cover. Its molded profile is designed to correspond with the specified pre-facelift front-end contours, grille opening, and surrounding mounting areas. This listing includes the standalone front bumper cover shell only – NI1000366 / OEM: 62022-6CA0H, finished in primed black.

Interchange Part Numbers

Please compare your vehicle trim, front bumper configuration, sensor layout, and reference numbers with the information below before ordering.

Key Features

• Standalone 1-piece front bumper cover replacement shell

• Designed for 2019-2022 Nissan Altima S, SR, and SV trims

• 6th Gen pre-facelift front fascia configuration

• Flush smooth non-sensor bumper layout

• Giant V-Motion front grille profile

• Primed black surface ready for proper paint preparation and refinishing

• Suitable for collision repair, exterior restoration, and damaged bumper replacement

Technical Fitment Notes

This front bumper cover is intended specifically for the 2019-2022 Nissan Altima 6th Gen pre-facelift configuration. The molded fascia profile is designed around the corresponding pre-facelift front-end layout, including the Giant V-Motion grille opening, headlight-side contours, lower fascia structure, and mounting locations. Important: This bumper cover is intended for the flush smooth non-sensor configuration. It should not be treated as interchangeable with bumper covers that use factory-molded parking sensor openings or other front fascia configurations with different openings or mounting layouts. This component is intended for the 2019-2022 pre-facelift design. Please verify the vehicle year, trim, bumper configuration, and existing mounting layout before ordering. When matched to the correct vehicle and bumper configuration, this cover is designed as a direct replacement-style exterior body component for the corresponding mounting locations.

Package Includes

• 1 × Front Bumper Cover Face Shell

Total: 1 Piece – Standalone Front Bumper Cover Shell Only

Important Component Notice

This listing includes only the front bumper cover shell specifically stated in the Package Includes section. Grilles, grille inserts, trim pieces, emblems, parking sensors, sensor hardware, brackets, retainers, absorber components, reinforcement bars, fog light components, fasteners, clips, and other surrounding parts are not included unless specifically stated otherwise. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the Product Description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original bumper cover, vehicle trim, front fascia configuration, sensor layout, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the 2019-2022 Nissan Altima Standard S, SR, and SV 6th Gen pre-facelift smooth non-sensor configuration. Please confirm these features and the listed interchange numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. or Nissan North America, Inc. Nissan® and Altima® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, sensor configuration, mounting points, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Overview

Bring the front of your Corolla back to a clean, sport-oriented appearance with this aftermarket front bumper cover, developed for 2020–2022 Toyota Corolla SE & XSE pre-facelift models. Manufactured from durable automotive-grade impact-resistant plastic, the fascia is supplied in a primed black finish for professional prep and painting. Its SE/XSE-specific design makes it a strong replacement choice for collision damage, cosmetic wear, or previously repaired bumper covers that no longer align or present properly.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

Confirm Fitment Before Purchase

This bumper cover is intended specifically for 2020–2022 Toyota Corolla SE & XSE pre-facelift configurations. Before ordering, compare your original bumper’s overall contour, grille openings, side bezel areas, mounting tabs, and reference numbers. SE/XSE bumper layouts differ from standard-trim Corolla configurations.

Components Not Included

This listing includes the front bumper cover shell only. Upper and lower grilles, side bezels or inserts, brackets, retainers, reinforcement components, lighting parts, sensors, emblems, mounting hardware, and other surrounding bumper components are not included unless specifically listed in the package contents.

Refinishing & Installation

The bumper is supplied in a primed black, unpainted finish intended for professional refinishing. Test-fit the fascia before painting, then complete the necessary surface preparation, color matching, and final paintwork. Professional installation is recommended to help ensure proper panel alignment and fit.

Packaging Note

Because bumper covers are large and flexible, minor temporary flexing may occur during transportation. After unpacking, allow the fascia to rest at room temperature and recover its natural shape before test-fitting or refinishing.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Corolla® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, and existing components before purchase.

Product Overview

Bring the front of your 2020–2022 Toyota Corolla L, LE, or XLE back to a clean, repair-ready condition with this aftermarket bumper cover fascia. Designed around the pre-facelift standard-trim front bumper layout, the shell is manufactured from durable automotive-grade plastic and supplied in a primed black finish for professional refinishing. It is well suited for collision repairs, cosmetic replacement, or vehicles with cracked, scraped, or heavily worn original bumper covers.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

Confirm Fitment Before Ordering

This bumper cover is intended for 2020–2022 Toyota Corolla L, LE & XLE pre-facelift configurations. Before purchase, compare your original bumper’s overall profile, grille openings, side openings, mounting tabs, and reference numbers. Trim-specific bumper layouts may differ even within the same model year.

Components Sold Separately

This listing is for the bumper cover shell only.  Grilles, side bezels or inserts, brackets, retainers, reinforcement bars, lighting components, sensors, emblems, and installation hardware are not included unless specifically identified as part of the package.

Refinishing & Installation

The supplied primed black surface is not a final exterior finish. The bumper should be test-fitted before painting, followed by proper surface preparation, color matching, and refinishing. Professional installation is recommended, particularly when the vehicle has prior collision damage or surrounding mounting points require adjustment or replacement.

Packaging Note

Large automotive fascia panels are naturally flexible and may show temporary movement in shape during transportation. After unpacking, place the bumper in a suitable indoor environment and allow it to settle into its normal form before test-fitting or refinishing.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Corolla® are registered trademarks of Toyota Motor Corporation. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, and existing components before purchase.

Product Description

This Front Bumper Cover Replacement is designed for 2020-2023 Nissan Sentra SR and SR Premium Trims Only with the 8th Gen B18 platform and pre-molded outer lower bumper wing lip spoiler cutout slots. The bumper cover serves as the exterior front fascia shell and is suitable for replacing a cracked, scraped, dented, deformed, or collision-damaged original front bumper cover. Its molded profile is designed to correspond with the specified SR front-end styling and lower spoiler cutout configuration. This listing includes the standalone front bumper cover shell only – NI1000340 / OEM: 62022-6LB5H, finished in primed black.

Interchange Part Numbers

Please compare your vehicle trim, front bumper configuration, lower spoiler layout, and reference numbers with the information below before ordering.

Key Features

• Standalone 1-piece front bumper cover replacement shell

• Designed for 2020-2023 Nissan Sentra SR and SR Premium trims

• 8th Gen B18 platform front fascia configuration

• Pre-molded outer lower bumper wing lip spoiler cutout slots

• Primed black surface ready for proper paint preparation and refinishing

• Molded profile for the corresponding SR front fascia and lower spoiler layout

• Suitable for collision repair, exterior restoration, and damaged bumper replacement

Technical Fitment Notes

This front bumper cover is intended specifically for the 2020-2023 Nissan Sentra 8th Gen B18 platform SR and SR Premium configuration. The molded fascia profile includes the corresponding outer lower bumper wing lip spoiler cutout slots as part of the front bumper design. These openings are an important configuration detail when comparing this replacement with the existing bumper cover. Important: This bumper cover is intended for the SR / SR Premium configuration and should not be treated as interchangeable with Base S, SV, or other front fascia configurations that use a smooth lower bumper layout without the corresponding spoiler cutout slots. When matched to the correct vehicle, trim, and bumper configuration, this cover is designed as a direct replacement-style exterior body component for the corresponding mounting locations.

Package Includes

• 1 × Front Bumper Cover Face Shell

Total: 1 Piece – Standalone Front Bumper Cover Shell Only

Important Component Notice

This listing includes only the front bumper cover shell specifically stated in the Package Includes section. Lower wing lip spoilers, trim pieces, grille components, emblems, sensors, brackets, retainers, absorber components, reinforcement bars, fog light components, fasteners, clips, and other surrounding parts are not included unless specifically stated otherwise. The bumper cover includes the described pre-molded spoiler cutout slots only. The spoiler or lip components themselves are not included unless specifically listed. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the Product Description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original front bumper cover, vehicle trim, front fascia configuration, lower spoiler cutout layout, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the 2020-2023 Nissan Sentra SR and SR Premium 8th Gen B18 configuration with pre-molded outer lower bumper wing lip spoiler cutout slots. Please confirm these features and the listed interchange numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. or Nissan North America, Inc. Nissan® and Sentra® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, mounting points, spoiler configuration, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Description

This Front Bumper Cover Replacement is designed for 2020-2023 Nissan Sentra Standard Base S and SV Trims Only with the 8th Gen B18 platform and Non-SR smooth flush flat black front fascia configuration. The bumper cover serves as the exterior front fascia shell and is suitable for replacing a cracked, scraped, dented, deformed, or collision-damaged original front bumper cover. Its molded profile is designed to correspond with the specified B18 front-end contours, grille opening, and surrounding mounting areas. This listing includes the standalone front bumper cover shell only – NI1000339 / OEM: 62022-6LB0H, with the specified flat black nose configuration.

Interchange Part Numbers

Please compare your vehicle trim, front bumper configuration, and reference numbers with the information below before ordering.

Key Features

• Standalone 1-piece front bumper cover replacement shell

• Designed for 2020-2023 Nissan Sentra Base S and SV trims

• 8th Gen B18 platform front fascia configuration

• Non-SR smooth flush bumper design

• Flat black nose specification

• Molded profile for the corresponding grille opening and front-body layout

• Suitable for collision repair, exterior restoration, and damaged bumper replacement

Technical Fitment Notes

This front bumper cover is intended specifically for the 2020-2023 Nissan Sentra 8th Gen B18 platform Standard Base S and SV configuration. The molded fascia profile is designed around the corresponding smooth flush front-end layout, including the grille opening, front corner contours, lower fascia structure, and mounting locations. Important: This bumper cover is intended for the Non-SR configuration. It should not be treated as interchangeable with SR or other front fascia configurations that use different styling, openings, mounting profiles, or surrounding components. When matched to the correct vehicle, trim, and bumper configuration, this cover is designed as a direct replacement-style exterior body component for the corresponding mounting locations.

Package Includes

• 1 × Front Bumper Cover Face Shell

Total: 1 Piece – Standalone Front Bumper Cover Shell Only

Important Component Notice

This listing includes only the front bumper cover shell specifically stated in the Package Includes section. Grilles, grille inserts, trim pieces, emblems, sensors, sensor hardware, brackets, retainers, absorber components, reinforcement bars, fog light components, fasteners, clips, and other surrounding parts are not included unless specifically stated otherwise. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the Product Description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original front bumper cover, vehicle trim, front fascia configuration, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the 2020-2023 Nissan Sentra Standard Base S and SV 8th Gen B18 Non-SR smooth flush configuration. Please confirm your vehicle trim, existing bumper layout, and listed interchange numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. or Nissan North America, Inc. Nissan® and Sentra® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, mounting points, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Overview

Restore your Toyota Camry’s front-end appearance with this aftermarket front bumper cover replacement, designed specifically for 2021–2024 Toyota Camry SE & XSE facelift models. Constructed from durable automotive-grade impact-resistant plastic, this front bumper fascia shell features a primed black finish and is ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover. Suitable for collision repair, cosmetic restoration, and body shop replacement applications, this standalone fascia shell provides a clean foundation for professional refinishing and installation.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell
  

Before You Order

Please verify your vehicle year, trim configuration, front bumper design, and reference numbers before purchasing. Compare the bumper shape, grille and bezel openings, mounting points, and reference numbers with your existing part to confirm compatibility. Designed specifically for 2021–2024 Toyota Camry SE & XSE facelift configurations. Does not fit LE or XLE bumper configurations.

What’s Not Included

This listing includes the front bumper cover fascia shell only. Upper grille components, lower grille inserts, side or fog-light bezel components, trim moldings, brackets, retainers, reinforcement components, lighting parts, and mounting hardware are not included unless specifically stated in the package contents.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Camry® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, interchange numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore your Toyota Camry’s front-end appearance with this aftermarket front bumper cover replacement, designed specifically for 2021–2024 Toyota Camry LE & XLE facelift models. Constructed from durable automotive-grade impact-resistant plastic, this front bumper fascia shell features a primed black finish and is ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover. Suitable for collision repair, cosmetic restoration, and body shop replacement applications, this standalone fascia shell provides a clean foundation for professional refinishing and installation.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

Before You Order

Please verify your vehicle year, trim configuration, front bumper design, and reference numbers before purchasing. Compare the bumper shape, grille and bezel openings, mounting points, and reference numbers with your existing part to confirm compatibility. Designed specifically for 2021–2024 Toyota Camry LE & XLE facelift models. Does not fit SE or XSE bumper configurations.

What’s Not Included

This listing includes the front bumper cover fascia shell only. Upper and lower grille components, side inserts or bezels, trim moldings, brackets, retainers, reinforcement components, lighting parts, and mounting hardware are not included unless specifically stated in the package contents.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Camry® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, interchange numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Built for 2022–2025 Toyota RAV4 Limited post-facelift models, this aftermarket front bumper cover features two pre-molded front parking radar sensor holes to match the corresponding premium-trim fascia configuration. The shell is formed from durable automotive-grade impact-resistant plastic and supplied in a primed black finish for professional prep and refinishing. Its sensor-ready layout makes it a practical replacement for front bumpers affected by collision damage, cracks, heavy scrapes, deformation, or prior repair work.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

Radar & Fitment Check

This bumper cover is intended specifically for 2022–2025 Toyota RAV4 Limited post-facelift configurations with two pre-molded front parking radar sensor holes. Before ordering, compare the sensor-hole count and placement, grille openings, lower fascia profile, side openings, mounting locations, and reference numbers with your original bumper. Non-sensor or other trim-specific front fascia layouts may require a different cover.

Components Sold Separately

This listing includes the front bumper cover fascia shell only. Parking radar sensors, sensor brackets or retainers, grille components, side bezels or inserts, reinforcement parts, lighting components, emblems, mounting hardware, and other surrounding bumper accessories are not included unless specifically stated in the package contents.

Paint & Installation

The bumper cover is supplied in a primed black, unpainted finish and requires final surface preparation, color matching, and professional painting before installation. Test-fit the fascia before paintwork to verify sensor-hole positioning, grille alignment, and mounting-point fitment. Professional refinishing and installation are recommended for the best final result.

Packaging & Handling

Because front bumper covers are large, flexible exterior panels, minor temporary flexing may occur during packaging or transportation. After unpacking, allow the bumper cover to rest at room temperature and recover its natural contour before test-fitting, preparation, or painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and RAV4® are registered trademarks of Toyota Motor Corporation. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, radar configuration, and existing components before purchase.

Product Overview

Designed for the updated 2022–2025 Toyota RAV4 LE & XLE post-facelift front-end configuration, this aftermarket bumper cover offers a clean replacement solution for damaged, cracked, scraped, or previously repaired factory fascia panels. The cover is molded from durable automotive-grade impact-resistant plastic and supplied in a primed black finish for professional prep and refinishing. Its standard-trim profile is intended to match the LE/XLE bumper layout while providing a solid foundation for collision repair or cosmetic restoration.

Reference Numbers

Package Includes

• 1x Front Bumper Cover Face Matrix Shield Shell

Fitment Verification

This bumper cover is intended for 2022–2025 Toyota RAV4 LE & XLE post-facelift models using the corresponding standard front bumper configuration. Before ordering, compare the bumper contour, grille openings, side insert areas, mounting locations, and reference numbers with the original part on your vehicle. Other trims may use a different fascia layout.

Components Sold Separately

This listing includes the front bumper cover fascia shell only. Grille assemblies, side bezels or inserts, brackets, retainers, reinforcement components, lighting parts, sensors, emblems, mounting hardware, and other surrounding bumper components are not included unless specifically listed in the package contents.

Paint Preparation & Installation

The supplied primed black finish is intended for professional refinishing and is not the vehicle’s final exterior color. Test-fit the bumper before painting to confirm alignment with the surrounding body panels, grille openings, and mounting points. Proper surface preparation, color matching, painting, and professional installation are recommended.

Packaging & Handling

Automotive bumper covers are flexible exterior panels and may experience minor temporary flexing during packaging or transportation. After unpacking, allow the bumper cover to rest at room temperature and recover its natural contour before test-fitting or beginning refinishing work.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and RAV4® are registered trademarks of Toyota Motor Corporation. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, and existing components before purchase.

Product Overview

Restore major front-end components with this Front Bumper Structural Restoration Bundle Kit, designed as an OE-style aftermarket solution for collision repair and front-end rebuilding. The package combines the main bumper fascia with structural reinforcement, lower protection panels, mounting supports, license-plate bracket, and facelift-style fog-light bezels in one coordinated restoration bundle.

Package Includes

Product Highlights

• Comprehensive front-end collision restoration package

• Includes both exterior and structural bumper components

• OE-style contours and compatible mounting locations

• Heavy-duty steel bumper reinforcement beam

• Includes lower bumper and underbody protection panels

• Includes LH & RH bumper mounting supports

• Includes LH & RH facelift-style fog-light bezels

• Designed to simplify multi-component front-end repairs

Important Component Notice

This package includes only the components specifically listed in the Package Includes table. Items such as the upper grille assembly, center grille inserts, fog lamps, lighting wiring, emblem, sensors, absorber foam, and additional mounting hardware are not included unless specifically stated. Compatible original components may be transferred from the existing bumper assembly when applicable.

Paint & Installation Notice

The front bumper cover is supplied primed and unpainted and requires professional surface preparation, color matching, and final paint before installation. Always test fit the bumper cover and all related components before painting, drilling, cutting, or permanent modification. Because this package includes structural and underbody components, professional installation is strongly recommended. Previous collision damage, distorted mounting points, damaged brackets, or frame alignment issues should be inspected and corrected before installation. Painted, installed, drilled, cut, damaged, or permanently modified products may not qualify for return under the VELNOX Auto Return Policy.

Folded Shipping & Unboxing Notice

Due to the flexible construction of the bumper cover, the fascia may be professionally folded and securely packed inside a reinforced shipping carton to help reduce oversized-carrier shipping costs. Temporary bends, waves, creases, or packaging impressions may appear after unpacking and do not necessarily indicate permanent damage.

After unpacking:

1. Remove all protective packaging.

2. Place the bumper cover in a warm, clean area.

3. Allow sufficient time for the panel to recover its molded shape.

4. Apply low, controlled heat gradually and evenly only if necessary.

5. Confirm proper shape and alignment before paint preparation or installation.

Avoid concentrated direct heat, open flame, or overheating, as excessive heat may damage the primer or permanently deform the bumper cover.

Before Ordering

Compare the Partslink / interchange numbers, OEM reference numbers, component design, and mounting locations with the original vehicle components before purchase. Pay particular attention to the bumper cover design, fog-light bezel opening style, lower protection panels, and mounting support locations.

Compatibility Disclaimer

This product is an aftermarket replacement and appearance-upgrade component and is not manufactured or supplied by Honda Motor Co., Ltd. OEM reference numbers, North American interchange numbers, vehicle names, trim names and body-style descriptions are provided solely for identification and compatibility verification. Their use does not indicate that this product is a genuine Honda OEM part. Honda®, Civic® and related trademarks are the property of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, endorsed by or authorized by Honda Motor Co., Ltd.

Product Overview

Restore the front-end appearance of your Honda CR-V with this aftermarket replacement Front Upper Bumper Cover Fascia. Designed for North American 2017–2019 Honda CR-V pre-facelift models, this replacement panel features an OE-style shape and a lightweight, flexible plastic construction. The bumper cover is supplied in a primed gray or black finish. Professional surface preparation, test fitting, color matching, painting, and installation are required.

Package Includes

• 1× Front Bumper Upper Cover Bare Skin Shell Panel

• Primed gray or black finish

• Pre-facelift specifications

• Partslink Number: HO1014104

• OEM Reference Numbers: 04711-TLA-A00ZZ / 71101-TLA-A00ZZ

• Hollander Number: 101-60317

Bare Shell Only

This listing includes the Front Upper Bumper Cover Bare Skin Shell ONLY.

The following components are not included:

• Lower bumper balance or valance grille

• Chrome flying-wing strip moldings

• Fog-light bezel covers

Existing factory components must be transferred from the original bumper cover or purchased separately as needed.

Folded Packaging Notice

To reduce oversized carrier shipping surcharges and provide greater shipping savings, this flexible bumper cover may be securely folded and packed with high-resiliency protective wrapping. Temporary bends, creases, or deformation may be visible after unpacking. Place the bumper cover in a warm environment and allow it sufficient time to gradually return to its original shape before test fitting or installation. Controlled heat may also be applied carefully by a qualified professional when necessary.

Paint and Installation Notice

This bumper cover is supplied in a primed finish and is not pre-painted. Professional surface preparation, test fitting, color matching, painting, and installation are strongly recommended. Always test-fit the bumper cover before painting, drilling, trimming, or making any modifications. Painted, modified, or installed parts may not be eligible for return.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM assembly. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other reference identifiers are provided solely for product identification and compatibility-reference purposes. Honda® and CR-V® are registered trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Product Overview

Replace your original bumper cover with an OE-style aftermarket replacement engineered to match the factory design and fit of compatible 2020–2022 Honda CR-V models. Manufactured to follow the original body lines and mounting locations, this Front Upper Bumper Cover is an ideal solution for repairing collision damage, replacing a cracked bumper, or restoring the factory appearance of your vehicle. Manufactured using automotive-grade injection-molded thermoplastic, the bumper cover provides the flexibility and durability expected of modern exterior body components. It is supplied in a primed gray/black finish and is ready for final surface preparation and painting to match your vehicle. Before placing your order, compare your original bumper cover with the reference part numbers below to confirm compatibility.

Reference Part Numbers

• OEM: 04711-TLA-A50ZZ / 71101-TLA-A50ZZ / 04711-TNY-A00ZZ

• Partslink: HO1014106

• Hollander Number: 101-99430X

Package Includes

• 1 × Front Upper Bumper Cover Bare Shell

• Primed Gray/Black Finish

Items Not Included

This listing includes the Front Upper Bumper Cover Bare Shell only. The following original components are not included and should be reused from your existing bumper or purchased separately if replacement is required:

• Lower bumper valance

• Front grille and grille inserts

• Chrome moldings

• Fog light bezels

• Front emblem

• Parking sensors and sensor retainers (if equipped)

• Mounting brackets

• Clips, screws, fasteners, and installation hardware

• Any additional components not specifically listed

Fitment & Installation

This bumper cover is designed exclusively for the 2020–2022 Honda CR-V facelift models. It is not compatible with 2017–2019 models, as Honda redesigned the front bumper assembly, mounting locations, and trim configuration beginning with the 2020 model year. The bumper cover is supplied in a primed finish and must be painted before installation. We recommend performing a complete test fit before sanding, painting, drilling, or making any permanent modifications. Professional painting and installation are recommended to help ensure proper panel alignment, consistent body gaps, and accurate color matching. Products that have been painted, modified, or installed may not be eligible for return under the VELNOX Auto Return Policy.

Compatibility Disclaimer

This is an aftermarket replacement part and is not a genuine Honda OEM product. OEM part numbers, Partslink numbers, Hollander interchange numbers, vehicle names, model names, and other manufacturer references are provided solely for product identification and compatibility-reference purposes. Honda® and CR-V® are registered trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd. The use of manufacturer names, trademarks, and reference numbers is for identification purposes only and does not imply any affiliation with or endorsement by the original vehicle manufacturer. Customers are responsible for verifying vehicle compatibility before purchase by reviewing the vehicle application, reference part numbers, and product specifications. If you have any questions regarding fitment, please contact VELNOX Auto before placing your order.

Product Overview

Restore major rear-end components with this 8-Piece Rear Bumper Restoration Bundle Kit, designed as an OE-style aftermarket solution for post-facelift Honda Civic Sedan applications. This coordinated package combines the rear bumper fascia with structural reinforcement, trunk garnish, lower valance, side mounting retainers, and rear corner bezel components for collision repair and rear-end restoration.

Package Includes

Product Highlights

• Complete rear-end restoration package

• Includes exterior, mounting, and structural bumper components

• OE-style contours and compatible mounting locations

• Designed for collision repair and rear-end rebuilding

Important Component Notice

Only the components specifically listed in the Package Includes table are included. Rear reflector lamps, parking sensors, sensor brackets, wiring, mounting clips, fasteners, and additional trim components are NOT included unless specifically stated. Compatible original components may be reused where applicable.

Paint & Installation Notice

The rear bumper cover is supplied primed and unpainted and requires professional surface preparation, color matching, and final paint before installation. Always test fit all components before painting, drilling, cutting, or permanent modification to verify alignment and mounting locations. Because this package includes a structural reinforcement beam and multiple mounting components, professional installation is recommended. Previous collision damage, distorted mounting points, worn retainers, or body alignment issues should be inspected and corrected before installation. Painted, installed, drilled, cut, damaged, or permanently modified products may not qualify for return under the VELNOX Auto Return Policy.

Folded Shipping & Unboxing Notice

Because of its flexible construction, the rear bumper cover may be professionally folded and securely packed inside a reinforced shipping carton to help reduce oversized-carrier shipping costs. Temporary bends, waves, creases, or packaging impressions may appear after unpacking and do not necessarily indicate permanent damage.

After unpacking:

1. Remove all protective packaging.

2. Place the bumper cover in a warm, clean area.

3. Allow sufficient time for the panel to recover its molded shape.

4. Apply low, controlled heat gradually and evenly only if necessary.

5. Confirm shape recovery before test fitting and paint preparation.

Avoid concentrated direct heat, open flame, or overheating, as excessive heat may damage the primer or permanently deform the panel.

Before Ordering

Compare the Partslink numbers, OEM reference numbers, Hollander numbers, rear fascia design, and mounting locations with the original vehicle components before purchase. Confirm that all components required beyond those listed in the package table are available for reuse or separate replacement.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda®, Accord®, LX®, Sport®, Touring®, and related names are registered trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Product Description

This Rear Bumper Bracket Left Driver Side Fender Support Guide is designed for 2017-2022 Honda CR-V (5th Gen Household Compact SUV All Models) and installs at the left-hand driver-side rear bumper and quarter-edge mounting area. This quarter edge lock retainer clip plate helps support, guide, and secure the rear bumper cover along the driver-side outer corner. It is suitable for replacing a guide bracket that is cracked, broken, loose, missing, or damaged during bumper removal, collision repair, or other rear-end repair work. This listing includes the Left Driver Side (LH) single component only – HO1142125 / OEM: 71598-TNY-A01 Core Spec.

Interchange Part Numbers

Please compare the component and reference numbers below with your existing part before ordering.

Key Features

• Left Driver Side (LH) rear bumper fender support guide

• Helps support and guide the rear bumper cover along the quarter edge

• Integrated retention points for the corresponding mounting location

• Suitable for replacing cracked, broken, loose, damaged, or missing bumper guides

• Useful for bumper replacement, collision repair, and rear-end restoration

• Single-component replacement for the corresponding LH mounting position

Technical Fitment Notes

This rear bumper fender support guide is intended specifically for the 2017-2022 5th Gen Honda CR-V configuration. The molded guide profile, snap-in retention points, and mounting locations are designed to correspond with the left-hand driver-side rear bumper and quarter-edge mounting area, helping maintain proper positioning and support of the rear bumper cover. Important: This component is intended for the 2017-2022 5th Gen Honda CR-V framework and should not be treated as interchangeable with different vehicle platform or generation mounting layouts. Other applications may use different bumper support profiles, anchor locations, and retention points. When matched to the correct vehicle application and mounting configuration, this guide is designed as a direct replacement-style component without requiring cutting, drilling, or trimming.

Package Includes

• 1 × Rear Bumper Left Driver Side Fender Support Guide

Total: 1 Piece – Left Driver Side (LH) Only

Important Component Notice

This listing includes only the component specifically stated in the Package Includes section. The right-side guide and any additional hardware, fasteners, clips, screws, trim pieces, brackets, accessories, or surrounding components that are not specifically listed are not included. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the product description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original guide, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the Left Driver Side (LH) component only. Please confirm the installation side, vehicle year, 5th Gen CR-V configuration, existing rear bumper mounting layout, and reference numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Honda Motor Co., Ltd. or American Honda Motor Co., Inc. Honda® and CR-V® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, mounting points, installation side, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Description

This Rear Bumper Bracket Left Driver Side Support Retainer Mounting Spacer is designed for 2018-2020 Honda Accord (10th Gen Pre-Facelift Sedan All Trims Sport, EX, LX) and installs at the left-hand driver-side rear bumper and fender-side mounting area. This support guide retainer plate helps secure and position the rear bumper cover along the driver-side outer corner. It is suitable for replacing a bracket that is cracked, broken, loose, missing, or damaged during bumper removal, collision repair, or other rear-end repair work. This listing includes the Left Driver Side (LH) single component only – HO1142118 / OEM: 71598-TVA-A01 Core Spec.

Interchange Part Numbers

Please compare the component and reference numbers below with your existing part before ordering.

Key Features

• Left Driver Side (LH) rear bumper support retainer bracket

• Helps support and guide the rear bumper cover along the fender-side corner

• Integrated retention points for the corresponding mounting location

• Suitable for replacing cracked, broken, loose, damaged, or missing retainers

• Useful for bumper replacement, collision repair, and rear-end restoration

• Single-component replacement for the corresponding LH mounting position

Technical Fitment Notes

This rear bumper support retainer guide plate is intended specifically for the 2018-2020 pre-facelift 10th Gen Honda Accord configuration. The molded bracket profile, retention points, and mounting locations are designed to correspond with the left-hand driver-side rear bumper and fender-side corner mounting area, helping maintain proper positioning and support of the rear bumper cover. Important: This component is intended for the 2018-2020 pre-facelift configuration and should not be treated as interchangeable with the 2021-2022 post-facelift configuration. The later models use a different rear bumper side mounting and anchor layout. When matched to the correct vehicle application and mounting configuration, this bracket is designed as a direct replacement-style component without requiring cutting, drilling, or trimming.

Package Includes

• 1 × Rear Bumper Left Driver Side Support Retainer Mounting Spacer

Total: 1 Piece – Left Driver Side (LH) Only

Important Component Notice

This listing includes only the component specifically stated in the Package Includes section. The right-side bracket and any additional hardware, fasteners, clips, screws, trim pieces, brackets, accessories, or surrounding components that are not specifically listed are not included. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the product description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original bracket, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the Left Driver Side (LH) component only. Please confirm the installation side, vehicle year, pre-facelift configuration, existing rear bumper mounting layout, and reference numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Honda Motor Co., Ltd. or American Honda Motor Co., Inc. Honda® and Accord® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, mounting points, installation side, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Description

This Rear Bumper Bracket Right Passenger Side Fender Support Guide is designed for 2017-2022 Honda CR-V (5th Gen Household Compact SUV All Models) and installs at the right-hand passenger-side rear bumper and quarter-edge mounting area. This quarter edge lock retainer clip plate helps support, guide, and secure the rear bumper cover along the passenger-side outer corner. It is suitable for replacing a guide bracket that is cracked, broken, loose, missing, or damaged during bumper removal, collision repair, or other rear-end repair work. This listing includes the Right Passenger Side (RH) single component only – HO1143125 / OEM: 71593-TNY-A01 Core Spec.

Interchange Part Numbers

Please compare the component and reference numbers below with your existing part before ordering.

Key Features

• Right Passenger Side (RH) rear bumper fender support guide

• Helps support and guide the rear bumper cover along the quarter edge

• Integrated retention points for the corresponding mounting location

• Suitable for replacing cracked, broken, loose, damaged, or missing bumper guides

• Useful for bumper replacement, collision repair, and rear-end restoration

• Single-component replacement for the corresponding RH mounting position

Technical Fitment Notes

This rear bumper fender support guide is intended specifically for the 2017-2022 5th Gen Honda CR-V configuration. The molded guide profile, snap-in retention points, and mounting locations are designed to correspond with the right-hand passenger-side rear bumper and quarter-edge mounting area, helping maintain proper positioning and support of the rear bumper cover. Important: This component is intended for the 2017-2022 5th Gen Honda CR-V framework and should not be treated as interchangeable with different vehicle platform or generation mounting layouts. Other applications may use different bumper support profiles, anchor locations, and retention points. When matched to the correct vehicle application and mounting configuration, this guide is designed as a direct replacement-style component without requiring cutting, drilling, or trimming.

Package Includes

• 1 × Rear Bumper Right Passenger Side Fender Support Guide

Total: 1 Piece – Right Passenger Side (RH) Only

Important Component Notice

This listing includes only the component specifically stated in the Package Includes section. The left-side guide and any additional hardware, fasteners, clips, screws, trim pieces, brackets, accessories, or surrounding components that are not specifically listed are not included. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the product description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original guide, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the Right Passenger Side (RH) component only. Please confirm the installation side, vehicle year, 5th Gen CR-V configuration, existing rear bumper mounting layout, and reference numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Honda Motor Co., Ltd. or American Honda Motor Co., Inc. Honda® and CR-V® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, mounting points, installation side, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Description

This Rear Bumper Bracket Right Passenger Side Support Retainer Mounting Spacer is designed for 2018-2020 Honda Accord (10th Gen Pre-Facelift Sedan All Trims Sport, EX, LX) and installs at the right-hand passenger-side rear bumper and fender-side mounting area. This support guide retainer plate helps secure and position the rear bumper cover along the passenger-side outer corner. It is suitable for replacing a bracket that is cracked, broken, loose, missing, or damaged during bumper removal, collision repair, or other rear-end repair work. This listing includes the Right Passenger Side (RH) single component only – HO1143118 / OEM: 71593-TVA-A01 Core Spec.

Interchange Part Numbers

Please compare the component and reference numbers below with your existing part before ordering.

Key Features

• Right Passenger Side (RH) rear bumper support retainer bracket

• Helps support and guide the rear bumper cover along the fender-side corner

• Integrated retention points for the corresponding mounting location

• Suitable for replacing cracked, broken, loose, damaged, or missing retainers

• Useful for bumper replacement, collision repair, and rear-end restoration

• Single-component replacement for the corresponding RH mounting position

Technical Fitment Notes

This rear bumper support retainer guide plate is intended specifically for the 2018-2020 pre-facelift 10th Gen Honda Accord configuration. The molded bracket profile, snap-in retention points, and mounting locations are designed to correspond with the right-hand passenger-side rear bumper and fender-side corner mounting area, helping maintain proper positioning and support of the rear bumper cover. Important: This component is intended for the 2018-2020 pre-facelift configuration and should not be treated as interchangeable with the 2021-2022 post-facelift configuration. The later models use a different rear bumper side mounting and anchor layout. When matched to the correct vehicle application and mounting configuration, this bracket is designed as a direct replacement-style component without requiring cutting, drilling, or trimming.

Package Includes

• 1 × Rear Bumper Right Passenger Side Support Retainer Mounting Spacer

Total: 1 Piece – Right Passenger Side (RH) Only

Important Component Notice

This listing includes only the component specifically stated in the Package Includes section. The left-side bracket and any additional hardware, fasteners, clips, screws, trim pieces, brackets, accessories, or surrounding components that are not specifically listed are not included. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the product description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original bracket, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the Right Passenger Side (RH) component only. Please confirm the installation side, vehicle year, pre-facelift configuration, existing rear bumper mounting layout, and reference numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Honda Motor Co., Ltd. or American Honda Motor Co., Inc. Honda® and Accord® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, mounting points, installation side, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Overview

This aftermarket rear bumper cover is designed for 2014–2016 Nissan Rogue S & SV pre-facelift models using the corresponding non-sensor one-piece rear fascia configuration. Unlike a separate upper bumper and lower valance setup, this version is manufactured as a single unified rear bumper assembly, combining the upper body-panel section and lower valance-style area into one integrated shell. The one-piece construction helps maintain the correct factory-style rear profile while simplifying replacement of a damaged original fascia. Made from durable automotive-grade impact-resistant plastic, the bumper cover is suitable for collision repair, cosmetic restoration, or replacement of panels affected by cracks, scrapes, deformation, or previous repair work.

Reference Numbers

Package Includes

• 1x Complete Rear Bumper Cover Unified Assembly

• Integrated upper body-panel and lower valance-style fascia design

• Single-piece construction

One-Piece Configuration

This product is supplied as one complete molded rear bumper cover, not as two separate bumper pieces. The upper bumper section and lower black valance-style area are incorporated into the same unified fascia structure for the corresponding 2014–2016 Nissan Rogue S & SV pre-facelift configuration. Before ordering, compare the overall rear bumper contour, lower fascia design, reflector areas, mounting locations, and reference numbers with your existing part.

Fitment Notes

Designed for 2014–2016 Nissan Rogue S & SV pre-facelift models using the compatible non-sensor rear bumper layout. Sensor-equipped, higher-trim, or differently configured Rogue rear bumpers may use another fascia design. Verify your vehicle’s trim and existing bumper layout before purchase.

What’s Not Included

This listing includes the complete one-piece rear bumper cover assembly only. Reflectors, parking sensors, reinforcement bars, impact absorbers, brackets, retainers, mounting hardware, lighting components, and other surrounding rear bumper parts are not included unless specifically stated in the package contents.

Finish & Installation

The bumper cover should be test-fitted before final refinishing or installation to confirm alignment with the quarter-panel edges, reflector locations, and mounting points. Professional body-shop preparation and installation are recommended, particularly when the vehicle has previous collision damage or damaged surrounding mounting components.

Packaging & Handling

As a large flexible exterior body panel, the bumper cover may experience minor temporary flexing during packaging or transportation. After unpacking, allow the fascia to rest at room temperature and recover its natural contour before test-fitting or installation.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. Nissan® and Rogue® are registered trademarks of Nissan Motor Co., Ltd. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, rear bumper configuration, and existing components before purchase.

Product Overview

This complete rear bumper cover assembly is designed for 2017–2020 Nissan Rogue S & SV post-facelift models using the standard non-sensor rear bumper configuration. The bumper is manufactured as a single unified 1-piece assembly, combining the upper body panel skin with the lower textured black valance apron into one integrated structure. This design matches the corresponding S/SV rear fascia layout while eliminating the need to source the upper bumper section and lower valance separately. It is a suitable replacement for an original bumper assembly affected by collision damage, cracks, scrapes, deformation, or previous body repair.

Reference Numbers

Package Includes

• 1x Complete Rear Bumper Cover Assembly
  

Integrated 1-Piece Construction

The upper bumper skin and lower textured black valance are molded together as one complete unified rear bumper assembly. This is not a two-piece package. Both visual sections are incorporated into a single integrated bumper cover, providing the correct combined rear fascia configuration for the applicable S/SV models.

Fitment Configuration

Designed specifically for 2017–2020 Nissan Rogue S & SV post-facelift models with the smooth non-sensor rear bumper layout. Before ordering, compare the overall bumper shape, lower textured valance profile, sensor-hole layout, corner contour, mounting locations, and reference numbers with your original part.Sensor-equipped or higher-trim rear bumper configurations may require a different version.

What’s Not Included

This listing includes the complete integrated rear bumper cover assembly only. Reflectors, parking sensors, reinforcement components, impact absorbers, brackets, retainers, mounting hardware, and other separately installed rear bumper components are not included unless specifically stated in the package contents.

Installation Notice

Test-fit the complete bumper assembly before final installation to confirm alignment around the quarter-panel edges, lower valance area, corner profile, and mounting points. Professional body-shop installation is recommended, particularly if previous collision damage has affected surrounding brackets or mounting locations.

Packaging & Handling

Because this is a large flexible exterior body panel, minor temporary flexing may occur during packaging or transportation. After unpacking, allow the bumper assembly to rest at room temperature and recover its natural contour before test-fitting or installation.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. Nissan® and Rogue® are registered trademarks of Nissan Motor Co., Ltd. Vehicle names, trademarks, OEM numbers, Partslink references, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, rear bumper configuration, and existing components before purchase.

Product Overview

Replace your damaged rear bumper with this Rear Bumper Cover Assembly for 2020–2022 Honda CR-V North American models. Featuring an integrated upper and lower shell, this assembly provides a complete replacement for the original bumper cover while maintaining the vehicle's original appearance. The upper bumper cover is supplied in a primed black finish for sanding, preparation, and painting, while the lower section features a textured black finish that closely matches the factory appearance. Combining both sections into a single assembly simplifies replacement and eliminates the need to purchase the upper and lower bumper covers separately.

Product Highlights

• Complete upper and lower integrated bumper cover assembly

• Primed upper bumper cover ready for paint

• Factory-style textured black lower section

• Designed for 2020–2022 Honda CR-V North American models

• Direct replacement for the original bumper cover assembly

Reference Numbers

What's Not Included

The following items are not included:

• Rear lower valance trim

• Rear bumper reflectors

• Mounting clips, screws, bolts, and other installation hardware

Fitment & Installation

Compatible with 2020–2022 Honda CR-V North American models.

• Supplied with a primed upper bumper cover that requires preparation and painting before installation.

• Test fit all components before painting or final installation.

• Professional installation is recommended.

Compatibility Disclaimer

This is an aftermarket replacement part and is not a genuine Honda OEM product. OEM part numbers, North American interchange numbers, vehicle names, and model names are provided solely for product identification and compatibility-reference purposes. Honda® and CR-V® are registered trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, or endorsed by Honda Motor Co., Ltd.

Product Overview

Restore the rear-end appearance of your Honda Civic with this complete 2-In-1 Rear Bumper Restoration Kit. This package combines the main rear bumper cover with the center lower lip / diffuser valance, giving you the two major exterior components needed for a cleaner and more complete rear bumper repair.

Package Includes

2-In-1 Kit Configuration

This restoration package includes:

1. Rear Bumper Cover Fascia Bare Shell

2. Rear Center Lower Lip / Diffuser Valance

The bumper cover and lower valance are supplied as separate components for installation.

Product Highlights

• Complete rear bumper cover and lower valance combination

• OE-style replacement design

• Primed bumper cover ready for professional paint preparation

• Matte black lower valance supplied in finished trim appearance

• Factory-style contours and mounting locations

• Suitable for collision repair and rear-end exterior restoration

• Convenient bundled solution compared with purchasing both components separately

Only the components specifically listed in the Package Includes table are supplied.

This kit does NOT include:

• Rear reflectors

• Side bumper retainers or brackets

• Mounting clips or hardware

• Additional rear bumper trim or accessories

Compatible original components may be reused where applicable.

Paint & Installation Notice

The rear bumper cover is supplied primed and unpainted and requires professional surface preparation, color matching, and painting before final installation. The lower valance is supplied in a matte black finish. Professional installation is recommended. Always test fit both components before painting the bumper cover to verify alignment and mounting points. Existing retainers, brackets, clips, or previously damaged mounting areas may require adjustment or replacement.

Important Ordering Notice

Before ordering, compare the reference numbers, component design, and mounting locations with your original parts.

Key references include:

• HO1100287 / OEM 04715-TBA-A00ZZ

• HO1116102 / OEM 71510-TBA-A00

• Hollander 106-05241 — Rear Bumper Cover

Only the two components listed in the package table are included.

Compatibility Disclaimer

This product is an aftermarket replacement and restoration package and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, trim names, and body-style descriptions are provided solely for product identification and compatibility verification. Custom lighting installation requirements may vary depending on the vehicle’s original wiring and equipment configuration. Honda® and Civic® are registered trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.