Products

Product Overview

Replace a worn or damaged rear fascia with this aftermarket rear bumper cover, developed for 2020–2022 Toyota Corolla L, LE, XLE & Hybrid pre-facelift configurations. Molded from durable automotive-grade impact-resistant plastic, the bumper cover is supplied in a primed black finish for professional preparation and color matching. Its trim-specific rear profile makes it a suitable replacement for collision repairs, cosmetic restoration, or heavily damaged original bumper covers.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

Verify Your Application

This rear bumper cover is intended for 2020–2022 Toyota Corolla L, LE, XLE & Hybrid pre-facelift models. Before ordering, compare the rear bumper profile, lower openings, reflector positions, mounting areas, and reference numbers with the original part on your vehicle. Different trim configurations may use different rear fascia designs.

Components Not Included

This listing is for the rear bumper cover shell only. Reflectors, lower valance or garnish pieces, brackets, retainers, reinforcement components, sensors, mounting hardware, and other surrounding rear bumper parts are not included unless specifically identified in the package contents.

Refinishing & Installation

The primed black surface is intended for refinishing and is not a final exterior paint finish. Test-fit the bumper before painting, then complete the required surface preparation, color matching, and refinishing. Professional body-shop installation is recommended, particularly when surrounding mounting points have previous collision damage.

Packaging & Shape Recovery

Rear bumper covers are large, flexible exterior panels and may experience minor temporary flexing during transportation. After unpacking, allow the bumper cover to rest at room temperature and return to its natural shape before test-fitting, preparation, or painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Corolla® are registered trademarks of Toyota Motor Corporation. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, and existing components before purchase.

Product Description

This Rear Bumper Cover Replacement is designed for 2020-2023 Nissan Sentra SR and SR Premium Trims Only with the 8th Gen B18 platform and pre-molded lower spoiler valance shark-fin diffuser slot configuration. The bumper cover serves as the exterior rear fascia shell and is suitable for replacing a cracked, scraped, deformed, or collision-damaged original rear bumper cover. Its molded profile is designed to correspond with the wider sport-oriented SR rear fascia, lower valance area, and surrounding mounting locations. This listing includes the standalone rear bumper cover shell only – NI1100336 / OEM: 85022-6LB5H, manufactured from polypropylene (PP) and supplied in primed black for proper paint preparation and refinishing.

Interchange Part Numbers

Please compare your vehicle trim, rear bumper configuration, lower diffuser layout, and reference numbers with the information below before ordering.

Key Features

• Standalone 1-piece rear bumper cover replacement shell

• Designed for 2020-2023 Nissan Sentra SR and SR Premium trims

• 8th Gen B18 platform sport rear fascia configuration

• Pre-molded lower spoiler valance shark-fin diffuser slots

• Polypropylene (PP) construction

• Primed black surface ready for proper paint preparation and refinishing

• Molded profile for the corresponding SR rear-body and lower valance layout

• Suitable for collision repair, exterior restoration, and damaged bumper replacement

Technical Fitment Notes

This rear bumper cover is intended specifically for the 2020-2023 Nissan Sentra 8th Gen B18 platform SR and SR Premium configuration. The lower portion of the fascia incorporates the corresponding pre-molded shark-fin diffuser and lower spoiler valance slots used with the SR-style rear bumper layout. These molded openings are an important configuration detail when comparing this replacement shell with the existing rear bumper cover. Important: This bumper cover is intended for the SR / SR Premium configuration only. It should not be treated as interchangeable with the standard S or SV rear bumper configuration, which uses a different smooth lower fascia layout without the corresponding sport diffuser slots. This 8th Gen B18 rear fascia configuration should also not be treated as interchangeable with earlier-generation 2013-2019 Sentra rear bumper designs. When matched to the correct vehicle, trim, and bumper configuration, this cover is designed as a direct replacement-style exterior body component for the corresponding mounting locations.

Package Includes

• 1 × Rear Bumper Cover Face Shell

Total: 1 Piece – Standalone Rear Bumper Cover Shell Only

Important Component Notice

This listing includes only the rear bumper cover shell specifically stated in the Package Includes section. Lower valance components, shark-fin diffuser pieces, spoilers, reflectors, trim pieces, sensors, sensor hardware, brackets, retainers, absorber components, reinforcement bars, exhaust trim components, fasteners, clips, and other surrounding parts are not included unless specifically stated otherwise. The bumper cover includes the described pre-molded lower diffuser and spoiler slots only. The separate lower spoiler, valance, diffuser components, and related hardware are not included unless specifically listed. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the Product Description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original rear bumper cover, vehicle trim, rear fascia configuration, lower diffuser slot layout, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the 2020-2023 Nissan Sentra SR and SR Premium 8th Gen B18 configuration with pre-molded lower spoiler valance shark-fin diffuser slots. It is not intended for the standard S or SV smooth lower rear fascia configuration. Please confirm your trim, existing bumper layout, and listed interchange numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. or Nissan North America, Inc. Nissan® and Sentra® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, lower valance or diffuser configuration, mounting points, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Description

This Rear Bumper Cover Replacement is designed for 2020-2023 Nissan Sentra Standard Base S and SV Trims Only with the 8th Gen B18 platform and Non-SR smooth flush rear fascia configuration. The bumper cover serves as the exterior rear fascia shell and is suitable for replacing a cracked, scraped, dented, deformed, or collision-damaged original rear bumper cover. Its molded profile is designed to correspond with the specified B18 rear-body contours and surrounding mounting areas. This listing includes the standalone rear bumper cover shell only – NI1100335 / OEM: 85022-6LB0H, with a textured flat black specification.

Interchange Part Numbers

Please compare your vehicle trim, rear bumper configuration, and reference numbers with the information below before ordering.

Key Features

• Standalone 1-piece rear bumper cover replacement shell

• Designed for 2020-2023 Nissan Sentra Base S and SV trims

• 8th Gen B18 platform rear fascia configuration

• Non-SR smooth flush bumper design

• Textured flat black specification

• Molded profile for the corresponding rear-body and mounting layout

• Suitable for collision repair, exterior restoration, and damaged bumper replacement

Technical Fitment Notes

This rear bumper cover is intended specifically for the 2020-2023 Nissan Sentra 8th Gen B18 platform Standard Base S and SV configuration. The molded fascia profile is designed around the corresponding Non-SR rear-end layout, including the outer corner contours, lower fascia structure, and mounting locations. Important: This bumper cover is intended for the Non-SR configuration. It should not be treated as interchangeable with SR, SR Premium, or other rear fascia configurations that use different styling, openings, trim features, or mounting layouts. When matched to the correct vehicle, trim, and bumper configuration, this cover is designed as a direct replacement-style exterior body component for the corresponding mounting locations.

Package Includes

• 1 × Rear Bumper Cover Face Shell

Total: 1 Piece – Standalone Rear Bumper Cover Shell Only

Important Component Notice

This listing includes only the rear bumper cover shell specifically stated in the Package Includes section. Reflectors, trim pieces, sensors, sensor hardware, brackets, retainers, absorber components, reinforcement bars, exhaust trim components, fasteners, clips, and other surrounding parts are not included unless specifically stated otherwise. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the Product Description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original rear bumper cover, vehicle trim, rear fascia configuration, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the 2020-2023 Nissan Sentra Standard Base S and SV 8th Gen B18 Non-SR smooth flush configuration. Please confirm your vehicle trim, existing bumper layout, and listed interchange numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. or Nissan North America, Inc. Nissan® and Sentra® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, mounting points, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Overview

Restore your Toyota Camry’s rear exterior appearance with this aftermarket rear bumper cover replacement, designed specifically for 2021–2024 Toyota Camry SE & XSE facelift models. Constructed from durable automotive-grade impact-resistant plastic, this rear bumper fascia shell features a primed black finish and is ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover. Suitable for collision repair, cosmetic restoration, and body shop replacement applications, this standalone fascia shell provides a clean foundation for professional refinishing and installation

Reference Numbers 

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

Before You Order

Please verify your vehicle year, trim configuration, rear bumper design, and reference numbers before purchasing. Compare the bumper shape, lower openings, reflector locations, mounting points, and reference numbers with your existing part to confirm compatibility. Designed specifically for 2021–2024 Toyota Camry SE & XSE facelift configurations. Does not fit LE or XLE bumper configurations.

What’s Not Included

This listing includes the rear bumper cover fascia shell only. Lower valance or diffuser components, reflectors, garnish trim, brackets, retainers, reinforcement components, exhaust-related trim pieces, and mounting hardware are not included unless specifically stated in the package contents.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Camry® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, interchange numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore your Toyota Camry’s rear exterior appearance with this aftermarket rear bumper cover replacement, designed specifically for 2021–2024 Toyota Camry LE & XLE facelift models. Constructed from durable automotive-grade impact-resistant plastic, this rear bumper fascia shell features a primed black finish and is ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover. Suitable for collision repair, cosmetic restoration, and body shop replacement applications, this standalone fascia shell provides a clean foundation for professional refinishing and installation.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

Before You Order

Please verify your vehicle year, trim configuration, rear bumper design, and reference numbers before purchasing. Compare the bumper shape, lower openings, reflector locations, mounting points, and reference numbers with your existing part to confirm compatibility. Designed specifically for 2021–2024 Toyota Camry LE & XLE facelift models. Does not fit SE or XSE bumper configurations.

What’s Not Included

This listing includes the rear bumper cover fascia shell only. Lower valance or garnish components, reflectors, brackets, retainers, reinforcement components, exhaust-related trim pieces, and mounting hardware are not included unless specifically stated in the package contents.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Camry® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, interchange numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

This rear bumper cover is designed for 2022–2025 Toyota RAV4 LE & XLE post-facelift models without factory sensor holes, matching the standard rear fascia configuration used on these trims. Manufactured from durable automotive-grade impact-resistant plastic, the cover is supplied in a primed black finish for professional surface preparation and repainting. It provides a clean replacement solution for rear bumpers affected by cracks, scrapes, deformation, collision damage, or previous repair work.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

Fitment Confirmation

This bumper cover is intended specifically for 2022–2025 Toyota RAV4 LE & XLE post-facelift configurations without parking sensor holes. Before ordering, compare the rear bumper profile, reflector locations, lower contour, mounting areas, sensor-hole layout, and reference numbers with your original part. Sensor-equipped versions or other trim configurations may use a different rear fascia.

Parts Not Included

This listing includes the rear bumper cover fascia shell only. Reflectors, lower garnish or valance components, parking sensors, sensor brackets, retainers, reinforcement components, mounting hardware, and other surrounding rear bumper parts are not included unless specifically stated in the package contents.

Paint & Installation

The bumper cover is supplied in a primed black, unpainted finish and requires final surface preparation, color matching, and professional painting before installation. Test-fitting before paintwork is strongly recommended to confirm alignment with the quarter panels, reflector areas, and mounting points. Professional installation is recommended, especially when the vehicle has previous rear collision damage.

Packaging & Shape Recovery

Large bumper fascia panels are flexible by design and may show minor temporary movement in shape while packaged or transported. After unpacking, allow the bumper cover to rest at room temperature and return to its natural contour before test-fitting, preparation, or painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and RAV4® are registered trademarks of Toyota Motor Corporation. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, sensor configuration, and existing components before purchase.

Product Overview

Designed for 2022–2025 Toyota RAV4 Limited post-facelift models, this aftermarket rear bumper cover features four pre-molded backup radar sensor holes to match the corresponding flagship rear fascia configuration. Manufactured from durable automotive-grade impact-resistant plastic, the bumper cover is supplied in a black finish and provides a direct replacement solution for rear fascia panels affected by collision damage, cracks, deep scrapes, deformation, or previous repair work.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

Sensor & Application Verification

This bumper cover is intended specifically for 2022–2025 Toyota RAV4 Limited post-facelift configurations with four pre-molded rear backup radar sensor holes. Before ordering, compare the sensor-hole count and placement, reflector areas, lower bumper profile, mounting locations, and reference numbers with your original part. Non-sensor versions or other trim configurations may use a different rear fascia.

Components Not Included

This listing includes the rear bumper cover fascia shell only. Backup radar sensors, sensor brackets or retainers, reflectors, lower valance or garnish components, reinforcement parts, mounting hardware, and other surrounding rear bumper accessories are not included unless specifically stated in the package contents.

Finish & Installation

The bumper cover is supplied in a black exterior finish. The surface should be inspected before final installation to determine whether additional preparation or refinishing is required. Test-fit the bumper before final installation to verify sensor-hole positioning, reflector alignment, surrounding panel fitment, and mounting locations. Professional installation is recommended for the best finished result.

Packaging & Shape Recovery

Rear bumper covers are large, flexible exterior panels and may experience minor temporary flexing during packaging or transportation. After unpacking, allow the bumper cover to rest at room temperature and return to its natural contour before test-fitting or refinishing.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and RAV4® are registered trademarks of Toyota Motor Corporation. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, sensor configuration, and existing components before purchase.

Product Overview

Designed for 2017–2020 Nissan Rogue SL & Premium post-facelift models, this rear bumper cover is configured as a complete 1-piece unified high-trim assembly with four pre-molded backup radar sensor holes. The fascia follows the corresponding deep-corner rear bumper profile used on the higher-trim sensor-equipped configuration. Its integrated one-piece construction provides a complete exterior replacement solution when the original rear bumper has been cracked, scraped, deformed, collision-damaged, or previously repaired. Unlike the standard non-sensor S/SV rear fascia, this version is specifically configured around the 4-sensor high-trim rear bumper layout, making sensor-hole placement and overall bumper contour critical fitment points.

Reference Numbers

Package Includes

• 1x Complete Rear Bumper Cover Integrated Assembly

4-Sensor High-Trim Configuration

This rear bumper assembly is intended specifically for 2017–2020 Nissan Rogue SL & Premium post-facelift models using the corresponding four-sensor backup radar configuration. Before ordering, compare the sensor-hole count and placement, deep-corner profile, overall bumper contour, mounting locations, and reference numbers with your existing rear bumper. The standard S/SV non-sensor configuration uses a different rear fascia layout and should not be treated as interchangeable.

Unified One-Piece Design

The bumper is supplied as one complete integrated rear fascia assembly, not as multiple separate bumper-cover sections. Its unified construction is designed to maintain the correct high-trim profile and corresponding 4-sensor layout across the complete rear bumper surface.

Components Not Included

This listing includes the complete rear bumper cover assembly only. Backup radar sensors, sensor holders or brackets, reinforcement components, impact absorbers, mounting brackets, retainers, hardware, and other separately installed rear bumper components are not included unless specifically stated in the package contents.

Fitment & Installation

Test-fit the bumper before final installation to verify sensor-hole alignment, deep-corner fitment, quarter-panel alignment, and mounting-point compatibility. Professional body-shop installation is recommended, particularly when previous collision damage has affected surrounding mounting locations, sensor brackets, or adjacent body panels.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. Nissan® and Rogue® are registered trademarks of Nissan Motor Co., Ltd. Vehicle names, trademarks, OEM numbers, Partslink references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, radar-sensor configuration, and existing components before purchase.

Product Overview

Replacement rear left / driver side bumper bracket for 2014-2019 Toyota Corolla Sedan models, including L, LE, S, SE, XLE, and XSE trims. This retainer is installed along the rear bumper-to-fender edge and uses a flush-style side guide design to help keep the bumper corner properly supported and seated. It is a practical replacement when the original bracket becomes cracked, loose, broken, or missing.

Sold individually — Rear Left / Driver Side (LH), 1 Piece.

Part Number References

Package Includes

1x Rear Bumper Left Driver Side Support Retainer Bracket

Rear Left / Driver Side / LH — 1 Piece

Key Features

• Rear left / driver side replacement

• Flush-style rear fender-edge retainer guide design

• Helps keep the rear bumper corner properly supported

• Designed for the specified Corolla sedan application

• Suitable for replacing a cracked, loose, damaged, or missing bracket

Installation Notice

Professional installation is recommended. Compare the replacement bracket with the original part before installation. Make sure the mounting holes, retaining tabs, bracket shape, and LH orientation line up correctly. Do not force installation if the mounting pattern does not match.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd. 

Product Overview

This rear left / driver side bumper support retainer bracket is designed for 2016-2019 Nissan Sentra Sedan models, including S, SV, SR, SL, FE+, and Nismo trims. Installed at the rear driver-side bumper corner, this retainer helps secure the bumper cover along the fender-edge mounting area. Its shape is specific to the listed Sentra application and provides a clean replacement option when the original bracket is cracked, loose, broken, or missing.

Sold individually — Rear Left / Driver Side (LH), 1 Piece.

Part Number References

Package Includes

1x Rear Bumper Left Driver Side Support Retainer Bracket

Rear Left / Driver Side / LH — 1 Piece

Key Features

• Rear left / driver side replacement bracket

• Rear fender-edge retainer configuration

• Helps keep the bumper corner securely positioned

• Designed for the specified 2016-2019 Sentra sedan application

• Compatible with S, SV, SR, SL, FE+, and Nismo trims

• Suitable for replacing a damaged, cracked, loose, or missing bracket

Installation Notice

Professional installation is recommended. Compare the replacement bracket with the original part before installation. Confirm that the mounting holes, retaining tabs, bracket shape, and LH orientation line up correctly. Do not force installation if the mounting layout does not match.

Compatibility Disclaimer

This product is an aftermarket replacement component and is not a genuine Nissan OEM product.  OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement component before purchase. Nissan® and Sentra® are trademarks of Nissan Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Nissan Motor Co., Ltd.

Product Overview

Replacement rear left / driver side bumper bracket for 2020-2026 Toyota Corolla Sedan models, including LE, SE, XLE, XSE, and Hybrid configurations. This bracket fits at the rear driver-side bumper corner and uses the specified corner swivel-joint retainer guide design. It helps keep the bumper side edge properly supported and seated where it meets the rear fender area. A good replacement when the original bracket is cracked, loose, damaged, or missing.

Sold individually — Rear Left / Driver Side (LH), 1 Piece.

Part Number References

Package Includes

1x Rear Bumper Left Driver Side Support Retainer Bracket

Rear Left / Driver Side / LH — 1 Piece

Key Features

• Rear left / driver side replacement

• Corner swivel-joint retainer guide design

• Helps support the rear bumper corner at the side mounting area

• Designed for the specified 12th Gen Corolla sedan platform

• Covers the listed gasoline and Hybrid configurations

• Suitable for replacing a cracked, loose, broken, or missing bracket

Installation Notice

Professional installation is recommended. Compare the replacement bracket with the original part before installation. Make sure the mounting holes, guide tabs, bracket contour, and LH orientation line up correctly. Do not force installation if the shape or mounting points are different.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd. 

Product Overview

This Rear Bumper Left Driver Side Support Retainer Bracket is designed as a vehicle-specific replacement for the specified 2012-2017 Toyota Camry LE and XLE Sedan configuration. It mounts at the rear left bumper-to-fender edge area and uses the flush-spec rear fender-edge side retainer guide design, helping restore proper bumper side support and alignment when the original bracket is cracked, broken, damaged, or missing.

This listing is for ONE Rear Left / Driver Side (LH) bracket only.

Critical Fitment & Hardware Configuration Notice

This bracket is specifically configured for the Rear Left / Driver Side (LH) and uses the rear fender-edge side retainer guide flush-spec layout. Rear bumper brackets may differ by trim level, mounting layout, and installation side。 Before purchase, compare the replacement bracket with the original part and confirm:

• Rear Left / Driver Side mounting position

• Overall bracket shape

• Mounting-hole locations

• Retaining tabs and guide points

• Part number references

Please verify the installation side, bracket shape, and part number before ordering.

Part Number References

Package Includes

1x Rear Bumper Left Driver Side Support Retainer Mounting Bracket

Rear Left / Driver Side / LH — 1 Piece

Key Features

• Rear Left / Driver Side specific replacement

• Flush-spec rear fender-edge side retainer guide design

• Helps restore secure bumper side mounting

• Supports proper bumper-to-body alignment

• Vehicle-specific replacement design

• Suitable for replacing a damaged, cracked, broken, or missing original bracket

Installation & Fitment Notice

Professional installation is recommended. Before installation, compare the replacement bracket with the original component to confirm the mounting pattern, bracket profile, retaining-tab locations, installation side, and part number references. Do not force installation if the bracket configuration does not match the original component.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd. 

Product Overview

This Rear Bumper Left Driver Side Support Retainer Bracket is designed for 2012-2017 Toyota Camry SE, SE Sport, and XSE Sedan models. Mounted at the rear left bumper-to-fender edge area, this bracket features the Legacy Sport-spec side retainer guide configuration, helping support proper rear bumper side positioning and alignment.

This listing is for ONE Rear Left / Driver Side (LH) bracket only.

Critical Fitment & Hardware Configuration Notice

This bracket is specifically configured for the Rear Left / Driver Side (LH) and uses the rear fender-edge side retainer guide Legacy Sport-spec layout. Bracket design may vary by trim level, mounting layout, and installation side.

Before purchase, compare the replacement bracket with the original part and confirm:

• Rear Left / Driver Side mounting position

• Overall bracket shape

• Legacy Sport-spec configuration

• Mounting-hole locations

• Retaining tabs and guide points

• Part number match

Part Number References

Package Includes

1x Rear Bumper Left Driver Side Support Retainer Mounting Bracket

Key Features

• Rear Left / Driver Side specific replacement

• Legacy Sport-spec rear fender-edge retainer guide configuration

• Helps maintain proper rear bumper side support and alignment

• Designed for the specified vehicle and mounting position

• Suitable for replacing a cracked, broken, damaged, or missing original bracket

Installation & Fitment Notice

Professional installation is recommended. Before installation, compare the replacement bracket with the original component to confirm the mounting pattern, bracket profile, retaining-tab locations, installation side, and part number. Do not force installation if the bracket configuration does not match the original component.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd. 

Product Overview

This Rear Bumper Left Driver Side Support Retainer Bracket is designed for 2018-2024 Toyota Camry Sedan models on the TNGA XV70 platform, including the specified LE, SE, XSE, XLE, and Hybrid configurations. Positioned at the rear left bumper-to-fender side mounting area, this bracket uses a corner swivel-joint style retainer guide configuration to support the bumper cover at the outer rear corner and help keep the side edge properly secured.

Sold individually — ONE Rear Left / Driver Side (LH) bracket.

Fitment & Mounting Verification

This component is specifically intended for the Rear Left / Driver Side (LH) mounting position and should match the original rear corner retainer layout. Before installation, compare the replacement bracket with the original part and confirm:

• LH / Driver Side orientation

• Overall bracket shape

• Corner swivel-joint guide layout

• Mounting-hole positions

• Retaining tabs and contact points

• Part number match

A correct match is important for stable bumper corner retention and proper side-edge positioning.

Part Number References

Package Includes

1x Rear Bumper Left Driver Side Support Retainer Mounting Bracket

Rear Left / Driver Side / LH — 1 Piece

Key Features

• Rear Left / Driver Side specific replacement

• Rear fender-side retainer guide design

• Corner swivel-joint mounting configuration

• Helps stabilize the outer rear bumper corner

• Supports proper bumper side-edge retention

• Suitable for replacing a cracked, broken, loose, or missing original bracket

Installation Notice

Professional installation is recommended. Check the replacement bracket against the original component before securing it in place, with particular attention to the corner guide shape, mounting holes, retaining tabs, and LH orientation. The bracket should align naturally with the factory-style mounting points. Do not force installation if the profile or mounting locations do not correspond.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd. 

Product Overview

Replacement rear right / passenger side bumper bracket for 2014-2019 Toyota Corolla Sedan models, including L, LE, S, SE, XLE, and XSE trims. This retainer sits along the rear passenger-side bumper-to-fender edge and uses a flush-style side guide design to help keep the bumper corner seated and supported. It is a practical replacement when the original bracket has become cracked, loose, broken, or missing.

Sold individually — Rear Right / Passenger Side (RH), 1 Piece.

Part Number References

Package Includes

1x Rear Bumper Right Passenger Side Support Retainer Bracket

Rear Right / Passenger Side / RH — 1 Piece

Key Features

• Rear right / passenger side replacement

• Flush-style rear fender-edge retainer guide design

• Helps support the rear bumper corner at the side mounting point

• Designed for the specified Corolla sedan application

• Suitable for replacing a damaged, cracked, loose, or missing bracket

Installation Notice

Professional installation is recommended. Compare the replacement bracket with the original part before installation. Make sure the mounting holes, tabs, bracket shape, and RH orientation line up correctly. Do not force installation if the mounting pattern does not match.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd. 

Product Overview

Replacement rear right / passenger side bumper bracket for 2020-2026 Toyota Corolla Sedan models, including LE, SE, XLE, XSE, and Hybrid configurations. Installed at the rear passenger-side bumper corner, this retainer helps hold the bumper cover in place where it meets the fender-side mounting area. It uses the specified corner swivel-joint guide design for the 12th Gen TNGA Corolla platform. Ideal for replacing an original bracket that is cracked, loose, broken, or missing.

Sold individually — Rear Right / Passenger Side (RH), 1 Piece.

Part Number References

Package Includes

1x Rear Bumper Right Passenger Side Support Retainer Bracket

Rear Right / Passenger Side / RH — 1 Piece

Key Features

• Rear right / passenger side replacement

• Corner swivel-joint retainer guide design

• Helps keep the rear bumper corner securely positioned

• Designed for the specified 12th Gen Corolla sedan platform

• Compatible with the listed gasoline and Hybrid configurations

• Suitable for replacing a worn, cracked, damaged, or missing bracket

Installation Notice

Professional installation is recommended. Before installation, compare the replacement bracket with the original part and confirm that the mounting holes, guide tabs, bracket shape, and RH orientation line up correctly. The bracket should fit naturally at the mounting points. Do not force installation if the shape or attachment points are different.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd. 

Product Overview

This Rear Bumper Right Passenger Side Support Retainer Bracket is designed as a vehicle-specific replacement for the specified 2012-2017 Toyota Camry LE and XLE Sedan configuration. Mounted at the rear right bumper-to-fender edge area, this bracket uses a flush-spec rear fender-edge side retainer guide design to help support the bumper side edge and maintain proper alignment.

This listing is for ONE Rear Right / Passenger Side (RH) bracket only.

Critical Fitment & Hardware Configuration Notice

This bracket is specifically configured for the Rear Right / Passenger Side (RH) and uses the rear fender-edge side retainer guide flush-spec layout. Rear bumper brackets may vary by trim level, mounting layout, and installation side. Before purchase, compare the replacement bracket with the original part and confirm:

• Rear Right / Passenger Side mounting position

• Overall bracket shape

• Mounting-hole locations

• Retaining tabs and guide points

• Part number match

Please verify the installation side, bracket shape, and part number before ordering.

Part Number References

Package Includes

1x Rear Bumper Right Passenger Side Support Retainer Mounting Bracket

Rear Right / Passenger Side / RH — 1 Piece

Key Features

• Rear Right / Passenger Side specific replacement

• Flush-spec rear fender-edge side retainer guide design

• Helps support proper rear bumper side positioning

• Vehicle-specific mounting configuration

• Suitable for replacing a cracked, broken, damaged, or missing original bracket

• Designed for direct replacement on the specified application

Installation & Fitment Notice

Professional installation is recommended. Before installation, compare the replacement bracket with the original component to confirm the mounting pattern, bracket profile, retaining-tab locations, installation side, and part number. Do not force installation if the bracket configuration does not match the original component.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd. 

Product Overview

This Rear Bumper Right Passenger Side Support Retainer Bracket is designed for 2012-2017 Toyota Camry SE, SE Sport, and XSE Sedan models. Installed at the rear right bumper-to-fender edge area, this bracket uses the Legacy Sport-spec side retainer guide configuration to help maintain proper bumper side positioning and secure mounting.

This listing is for ONE Rear Right / Passenger Side (RH) bracket only.

Critical Fitment & Hardware Configuration Notice

This bracket is specifically configured for the Rear Right / Passenger Side (RH) and uses the Legacy Sport-spec rear fender-edge retainer guide layout. Bracket design may vary by trim level, mounting configuration, and installation side. Before purchase, compare the replacement bracket with the original part and confirm:

• Rear Right / Passenger Side mounting position

• Overall bracket shape

• Legacy Sport-spec configuration

• Mounting-hole locations

• Retaining tabs and guide points

• Part number match

Part Number References

Package Includes

1x Rear Bumper Right Passenger Side Support Retainer Mounting Bracket

Key Features

• Rear Right / Passenger Side specific replacement

• Legacy Sport-spec retainer guide configuration

• Vehicle-specific mounting design

• Helps restore secure rear bumper side mounting

• Suitable for replacing a cracked, broken, damaged, or missing original bracket

Installation & Fitment Notice

Professional installation is recommended. Before installation, compare the replacement bracket with the original component to confirm the mounting pattern, bracket profile, retaining-tab locations, installation side, and part number. Do not force installation if the bracket configuration does not match the original component.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd. 

Product Overview

This Rear Bumper Right Passenger Side Support Retainer Bracket is designed for 2018-2024 Toyota Camry Sedan models built on the TNGA XV70 platform, including the specified LE, SE, XSE, XLE, and Hybrid configurations. Located at the rear passenger-side bumper corner, this retainer helps secure the bumper cover where it meets the fender-side mounting area. Its corner swivel-joint guide configuration is designed to support proper bumper corner positioning and provide a stable replacement point when the original bracket is damaged, loose, cracked, or missing.

Sold individually — ONE Rear Right / Passenger Side (RH) bracket.

Fitment & Retainer Configuration Check

This bracket is designed specifically for the Rear Right / Passenger Side (RH) mounting position. Because rear bumper corner retainers depend on precise guide and tab placement, compare the replacement component with the original bracket before installation.

Check the following:

• Right / Passenger Side orientation

• Overall bracket contour

• Corner swivel-joint guide configuration

• Mounting-hole alignment

• Retaining-tab positions

• Part number match

Proper bracket geometry helps the bumper cover sit securely along the rear passenger-side corner.

Part Number References

Package Includes

1x Rear Bumper Right Passenger Side Support Retainer Mounting Bracket

Rear Right / Passenger Side / RH — 1 Piece

Key Features

• Rear passenger-side bumper retainer replacement

• Corner swivel-joint guide configuration

• Designed around the specified XV70 rear mounting layout

• Helps maintain secure bumper corner retention

• Supports proper bumper-to-fender side positioning

• Suitable for replacing a cracked, loose, broken, or missing original bracket

Installation Notice

Professional installation is recommended. Before final installation, compare the new bracket with the original component and verify the mounting holes, guide points, retaining tabs, overall contour, and RH orientation. The bracket should align naturally with the mounting area. Do not force installation if the mounting pattern or profile does not match.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd. 

Product Overview

Restore the rear exterior of your Honda Accord with this coordinated facelift-style replacement kit. The package combines the main bumper cover with matching lower trim, chrome accents, exhaust outlet covers, and side mounting supports.

Package Includes

Important Package Details

This listing includes the Bright Chrome Silver exhaust outlet covers only.  Before ordering, compare your original bumper shape, lower valance design, exhaust openings, center garnish, side-retainer mounting points, and reference numbers with the components listed above.

Not Included

Rear reflector lamps, parking sensors, reinforcement beam, energy absorber, tailgate license-plate garnish, exhaust system components, wiring, mounting clips, hardware, and lower underbody support panels are not included.

Paint and Installation Notice

The rear bumper cover arrives primed and requires professional preparation and paint matching. Test-fit all components before painting, drilling, cutting, or final installation. Professional body-shop installation is strongly recommended. Minor primer variations or light handling marks may occur during manufacturing and shipping and are normally corrected during standard refinishing.

Compatibility Disclaimer

This product contains aftermarket replacement components and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement components before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Product Overview

This high-trim rear bumper cover assembly is configured for 2014–2016 Nissan Rogue SL, Premium & Luxury pre-facelift models equipped with four factory-style backup radar sensor openings. The bumper is built as a single integrated rear fascia, combining the upper body-panel area and lower valance-style section into one unified molded structure. Unlike the standard non-sensor S/SV version, this configuration is specifically shaped around the premium rear bumper layout and incorporates the 4-sensor backup-assist pattern required by the corresponding higher-trim application. Manufactured from durable automotive-grade exterior plastic, the assembly is intended for collision restoration, major cosmetic repair, or replacement of an original fascia with cracks, deformation, sensor-area damage, or previous bodywork.

Reference Numbers

Package Includes

• 1x Complete Rear Bumper Cover Unified Assembly

• Integrated upper fascia and lower valance-style structure

• Four pre-molded backup radar sensor openings

High-Trim Sensor Configuration

This bumper is intended for SL, Premium & Luxury rear fascia configurations with four backup radar sensor holes. The sensor-hole pattern is an important fitment feature. Before ordering, compare the number and position of the sensor openings, reflector areas, lower fascia contour, mounting locations, and overall bumper profile with the original part on your Rogue. A non-sensor S/SV rear bumper or another sensor configuration may use a different fascia layout.

Integrated One-Piece Design

The upper bumper body section and lower rear valance area are molded together as one complete assembly rather than supplied as separate pieces. This integrated construction helps preserve the correct high-trim rear appearance while eliminating the need to source a separate lower fascia section.

What’s Not Included

This listing includes the complete rear bumper cover assembly only.  Backup radar sensors, sensor retainers or brackets, reflectors, reinforcement bars, impact absorbers, mounting brackets, hardware, and other surrounding rear bumper components are not included unless specifically stated in the package contents.

Fitment & Installation

Test-fit the bumper before final installation to verify sensor-hole alignment, reflector positioning, quarter-panel fitment, lower fascia alignment, and mounting-point compatibility. Professional body-shop installation is recommended, especially when the original vehicle has collision damage around the rear mounting structure or sensor system.

Packaging & Handling

Because this is a large integrated fascia panel, minor temporary flexing may occur during packaging or transportation. After unpacking, allow the bumper to rest at room temperature and return to its natural contour before installation or any required refinishing.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. Nissan® and Rogue® are registered trademarks of Nissan Motor Co., Ltd. Vehicle names, trademarks, OEM numbers, Partslink references, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, sensor configuration, and existing components before purchase.

Product Overview

Restore the rear-end appearance of your Honda CR-V with this aftermarket replacement Rear Bumper Cover Fascia. This listing includes the rear bumper cover bare shell in a primed gray or black finish. Constructed from heavy-duty polypropylene plastic, the bumper cover requires professional surface preparation, color matching, and painting before installation.

Package Includes

• 1× Rear Bumper Cover Bare Shell

• Primed gray or black finish

• Partslink Number: HO1100301

• OEM Reference Numbers: 71501-TLA-A00 / 04712-TLY-A00ZZ / 04717-TLY-A00ZZ

• Hollander Number: 190-10142B

• Material: Heavy-Duty Polypropylene Plastic

This listing includes the Rear Bumper Cover Bare Shell ONLY.

The following components are not included:

• Lower valance lip skirt

• Side reflector lamps

• Chrome garnish strips

Existing factory components may need to be transferred from the original bumper assembly or purchased separately as needed.

Paint and Installation Notice

This rear bumper cover is supplied in a primed finish and is not pre-painted. Professional surface preparation, test fitting, color matching, painting, and installation are strongly recommended. Always test-fit the bumper cover before painting, drilling, trimming, or making any modifications. Painted, modified, or installed parts may not be eligible for return.

Compatibility Disclaimer

This is an aftermarket replacement part and is not a genuine Honda OEM product. OEM part numbers, North American interchange numbers, vehicle names, and model names are provided solely for product identification and compatibility reference purposes. Honda® and CR-V® are registered trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, or endorsed by Honda Motor Co., Ltd.

Product Overview

This rear right / passenger side bumper support retainer bracket fits 2016-2019 Nissan Sentra Sedan models, including S, SV, SR, SL, FE+, and Nismo trims. The bracket sits at the rear passenger-side bumper edge and helps secure the bumper cover where it meets the fender-side mounting area. Its rear edge retainer guide profile is designed for the specified facelift Sentra application. It works well as a replacement for an original bracket that has cracked, loosened, broken, or gone missing.

Sold individually — Rear Right / Passenger Side (RH), 1 Piece.

Part Number References

Package Includes

1x Rear Bumper Right Passenger Side Support Retainer Bracket

Rear Right / Passenger Side / RH — 1 Piece

Key Features

• Rear right / passenger side replacement bracket

• Rear fender-edge retainer guide design

• Helps keep the bumper corner securely mounted

• Designed for the specified 2016-2019 Sentra sedan application

• Compatible with S, SV, SR, SL, FE+, and Nismo trims

• Suitable for replacing a loose, cracked, damaged, or missing bracket

Installation Notice

Professional installation is recommended. Before installation, compare the new bracket with the original component and make sure the mounting holes, retaining tabs, overall shape, and RH orientation match correctly. Do not force installation if the mounting pattern is different.

Compatibility Disclaimer

This product is an aftermarket replacement component and is not a genuine Nissan OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement component before purchase. Nissan® and Sentra® are trademarks of Nissan Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Nissan Motor Co., Ltd.