Products

Product Overview

Restore the rear-end appearance of your Honda Civic with this OE-style Rear Bumper Cover Fascia Bare Shell. Designed as a standalone replacement panel for collision repair or exterior restoration, this bumper cover follows the original-style shape and mounting layout for a clean replacement installation.

Package Includes

Product Features

• OE-style replacement rear bumper fascia

• Durable automotive-grade plastic construction

• Factory-style shape and mounting locations

• Suitable for collision repair and exterior restoration

• Designed for professional paint preparation and color matching

• Ideal replacement for cracked, dented, scratched, or damaged bumper covers

This listing is for the Rear Bumper Cover Bare Shell ONLY.

The following components are not included:

• Rear lower valance / diffuser trim

• Reflectors

• Bumper retainers or mounting hardware

• Additional rear bumper trim or accessories unless specifically stated

Compatible original components may be reused where applicable.

Paint & Installation Notice

The bumper cover is supplied primed and unpainted and requires paint preparation and color matching before final installation. Professional installation is recommended. Always test fit before painting to verify alignment and mounting points. Normal surface preparation may be required before painting. Existing mounting components or previously damaged areas may also require adjustment or replacement.

Important Ordering Notice

Before ordering, compare Partslink HO1100287, OEM 04715-TBA-A00ZZ, bumper design, and mounting locations with your original part. Only the component listed under Package Includes is included with your purchase.

Compatibility Disclaimer

This product is an aftermarket replacement component and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, trim names, and body-style descriptions are provided solely for product identification and compatibility verification. Honda® and Civic® are registered trademarks of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Product Overview

Restore a damaged rear bumper with this OE-style Rear Bumper Cover Fascia Bare Shell, designed as a direct aftermarket replacement for collision repair and exterior restoration. Constructed from durable, flexible automotive-grade plastic, this replacement bumper cover follows the original-style rear body contour and compatible factory-style mounting locations. It is supplied in a primed, unpainted finish and requires professional surface preparation, color matching, and final paint before installation.

Package Includes

Product Highlights

• OE-style rear bumper replacement design

• Durable automotive-grade plastic construction

• Factory-style contour and compatible mounting locations

• Primed surface ready for professional paint preparation

• Suitable for replacing cracked, dented, scratched, or collision-damaged bumper covers

• Designed for reuse of compatible original trim and surrounding components where applicable

This listing includes the rear bumper cover main shell ONLY.

The following components are NOT included:

• Rear lower diffuser / lower bumper lip

• Left and right rear side reflectors

• Mounting brackets, retainers, clips, or hardware

• Additional rear bumper trim or accessories unless specifically stated

Compatible original components may be transferred from the existing bumper assembly when applicable or purchased separately as needed.

Paint & Installation Notice

This bumper cover is supplied primed and unpainted and requires professional surface preparation, color matching, and painting before final installation. Always test fit the bumper cover before painting, drilling, cutting, or making permanent modifications to confirm panel alignment and mounting locations. Previous collision damage, worn retainers, damaged brackets, or misaligned mounting areas may affect installation and should be inspected before fitting the replacement bumper cover. Professional body-shop preparation and installation are recommended. Painted, installed, drilled, cut, damaged, or permanently modified products may not qualify for return under the VELNOX Auto Return Policy.

Folded Shipping & Unboxing Notice

Due to the flexible construction of the bumper cover, the panel may be professionally folded and securely packed inside a reinforced shipping carton to help reduce oversized-carrier shipping costs and improve shipping efficiency. Temporary bends, waves, creases, or packaging impressions may be visible immediately after unpacking. These conditions are commonly caused by folded packaging and do not necessarily indicate permanent damage to the bumper cover.

After unpacking:

1. Remove all protective wrapping and packaging materials.

2. Place the bumper cover in a warm, clean, flat area.

3. Allow sufficient time for the flexible plastic panel to recover toward its original molded shape.

4. If necessary, apply low, controlled heat gradually and evenly to affected areas.

5. Confirm the panel has recovered properly and test fit before paint preparation or installation.

Avoid concentrated direct heat, open flame, or overheating. Excessive heat may damage the primer, distort mounting areas, or permanently deform the bumper cover.

Before Ordering, please compare the following with your original bumper before purchase:

• Partslink No.: HO1100288

• OEM Reference No.: 04715-TBG-A00ZZ

• Original bumper design and mounting locations

Confirm that you are purchasing the Bare Shell ONLY configuration and that any required lower diffuser, reflectors, brackets, retainers, clips, or hardware are available for reuse or separate replacement.

FAQs

1. Is this rear bumper cover already painted?

No. It is supplied in a primed, unpainted finish and requires professional surface preparation, color matching, and final paint.

2. Are the lower diffuser and rear reflectors included?

No. This listing includes the rear bumper cover bare shell only. The lower diffuser / lip and left and right rear reflectors are not included.

3. Why may the bumper cover arrive folded?

The flexible bumper cover may be folded and securely protected inside a reinforced shipping carton to reduce oversized shipping costs. Temporary packaging impressions normally improve after proper unpacking and shape recovery.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured or supplied by Honda Motor Co., Ltd. OEM reference numbers, Partslink / North American interchange numbers, vehicle names, trim names, and body-style descriptions are provided solely for product identification and compatibility verification. Their use does not indicate that this product is a genuine Honda OEM part. Honda®, Civic®, and related trademarks are the property of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Restore the clean, factory-style rear appearance of your Honda Accord with this replacement rear bumper cover fascia. Designed for the updated facelift rear-end layout, it is ideal for replacing a cracked, scraped, dented, or collision-damaged bumper cover.

Package Includes

• 1x Rear Bumper Cover Fascia Bare Shell

• Primed finish

• Interchange Number: HO1100318

• OEM Reference Number: 71501-TVA-A10ZZ

This listing includes the rear bumper cover bare shell only.

Lower valance or diffuser skirt, chrome exhaust outlet bezels, tailgate center license-plate garnish, rear reflector lamps, parking sensors, reinforcement components, retainers, brackets, and mounting hardware are not included. Compatible original components may need to be transferred from the existing bumper or purchased separately.

Important Compatibility Note

Designed for the 2021–2022 Honda Accord facelift rear bumper configuration. This part does not fit 2018–2020 pre-facelift models, which use a different bumper structure, exhaust-area layout, lower-valance mounting system, and surrounding trim configuration.

Paint and Installation Notice

The bumper cover is supplied with a primed finish and requires professional surface preparation and paint matching before installation. Test-fit the bumper and confirm all openings, mounting points, and trim connections before painting or modifying the part. Professional body-shop installation is strongly recommended. Minor primer variations or light handling marks may occur during manufacturing and shipping and are normally corrected during standard refinishing.

Compatibility Disclaimer

This product is an aftermarket replacement component and is not a genuine Honda OEM product. OEM reference numbers, North American interchange numbers, vehicle names, model names, trim names, and other identifiers are provided solely for product identification and compatibility-reference purposes. All reference numbers are intended to assist customers in verifying vehicle compatibility and selecting the correct replacement component before purchase. Honda® and Accord® are registered trademarks of Honda Motor Co., Ltd. Trim and configuration names are used solely to identify compatible vehicle applications. VELNOX Auto is not affiliated with, sponsored by, endorsed by, or authorized by Honda Motor Co., Ltd.

Product Overview

Built for 2021–2023 Nissan Rogue S & SV models on the T33 platform, this aftermarket rear bumper cover matches the corresponding smooth non-sensor rear fascia configuration used on the standard trim layout. The shell is made from durable automotive-grade exterior plastic and supplied in a paintable black finish for professional preparation and refinishing. Its clean sensor-free rear profile makes it suitable for replacing an original bumper affected by cracking, scraping, deformation, collision damage, or previous body repair.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Trailing Armor Shield Shell

T33 Non-Sensor Rear Configuration

This bumper cover is intended for 2021–2023 Nissan Rogue S & SV T33 models using the smooth non-sensor rear bumper layout. Before ordering, compare the overall rear fascia profile, sensor-hole configuration, reflector areas, corner shape, mounting points, and reference numbers with your existing bumper. Sensor-equipped or higher-trim rear bumper configurations may use a different fascia design.

What’s Not Included

This listing includes the rear bumper cover shell only. Parking sensors, sensor brackets, reflectors, reinforcement components, retainers, mounting hardware, and other surrounding rear bumper parts are not included unless specifically stated in the package contents.

Finish & Installation

The bumper cover is supplied in a paintable black finish intended for professional surface preparation and refinishing. Test-fit the fascia before painting to verify alignment around the rear corners, reflector areas, quarter-panel edges, and mounting locations. Professional body-shop refinishing and installation are recommended.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. Nissan® and Rogue® are registered trademarks of Nissan Motor Co., Ltd. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, rear bumper configuration, and existing components before purchase.

Product Overview

Designed for 2021–2023 Nissan Rogue SL & Platinum models on the T33 platform, this aftermarket rear bumper cover is built around the high-trim 4-sensor rear fascia configuration. The shell is formed from durable automotive-grade exterior plastic and supplied in a paintable black finish for professional preparation and refinishing. Its four pre-molded parking sensor openings are intended to match the corresponding premium rear bumper layout, making it suitable for collision repair, cosmetic restoration, or replacement of a damaged original fascia.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

4-Sensor High-Trim Configuration

This bumper cover is intended for 2021–2023 Nissan Rogue SL & Platinum T33 models using the corresponding 4-sensor rear bumper layout. Before ordering, compare the sensor-hole count and placement, rear fascia contour, reflector areas, mounting locations, and overall bumper shape with your original part. Standard S/SV non-sensor configurations use a different rear fascia and should not be treated as interchangeable.

Components Not Included

This listing includes the rear bumper cover shell only. Parking sensors, sensor retainers or brackets, reflectors, reinforcement components, mounting hardware, and other surrounding rear bumper parts are not included unless specifically stated in the package contents.

Refinishing & Installation

The bumper cover is supplied in a paintable black finish intended for professional surface preparation and refinishing. Test-fit the fascia before painting to verify the sensor openings, reflector areas, rear corner alignment, quarter-panel fitment, and mounting locations. Professional body-shop refinishing and installation are recommended.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. Nissan® and Rogue® are registered trademarks of Nissan Motor Co., Ltd. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, sensor configuration, and existing components before purchase.

Product Description

This Rear Bumper Cover Lower Replacement is designed for 2016-2018 Nissan Altima Limited Trims Only with the mid-cycle facelift rear-end configuration and pre-molded 4 backup radar sensor holes. This lower rear bumper cover helps restore the exterior lower fascia area after cracking, impact damage, deformation, or collision repair. Its molded profile is designed to correspond with the specified rear bumper configuration while retaining the required sensor-hole layout. This listing includes the standalone rear lower bumper cover only – NI1100294, finished in automotive-grade black.

Interchange Part Numbers

Please compare your vehicle trim, rear bumper configuration, sensor layout, and reference numbers with the information below before ordering.

Key Features

• Standalone rear lower bumper cover replacement

• Designed for 2016-2018 Nissan Altima Limited trims

• Mid-cycle facelift rear fascia configuration

• Pre-molded with 4 backup radar sensor holes

• Black exterior finish

• Molded profile for the corresponding rear bumper layout

• Suitable for collision repair, exterior restoration, and damaged lower bumper replacement

Technical Fitment Notes

This rear lower bumper cover is intended specifically for the 2016-2018 Nissan Altima Limited mid-cycle facelift configuration. The molded lower fascia profile incorporates 4 pre-molded backup radar sensor holes as part of the bumper design. These openings are an important configuration detail when comparing this replacement with the existing rear bumper component. Important: This component is intended for vehicles equipped with the corresponding 4 backup radar sensor hole configuration. It should not be treated as interchangeable with a smooth non-sensor lower bumper cover or another rear fascia configuration that uses a different sensor-hole or mounting layout. When matched to the correct vehicle and bumper configuration, this lower cover is designed as a direct replacement-style exterior body component for the corresponding mounting locations.

Package Includes

• 1 × Rear Bumper Cover Lower

Total: 1 Piece – Standalone Rear Lower Bumper Cover Only

Important Component Notice

This listing includes only the rear lower bumper cover specifically stated in the Package Includes section. Backup radar sensors, sensor hardware, upper bumper cover, trim pieces, reflectors, brackets, retainers, absorber components, reinforcement bars, fasteners, clips, and other surrounding parts are not included unless specifically stated otherwise. The component includes the described pre-molded 4 backup radar sensor holes only. Electronic sensors and related hardware are not included. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the Product Description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original rear bumper component, vehicle trim, fascia configuration, sensor-hole layout, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the 2016-2018 Nissan Altima Limited mid-cycle facelift configuration with 4 backup radar sensor holes. Please confirm these features and the listed interchange numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. or Nissan North America, Inc. Nissan® and Altima® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, sensor configuration, mounting points, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Description

This Rear Bumper Cover Lower Replacement is designed for 2019-2022 Nissan Altima Limited, SL, and Platinum Trims Only with the 6th Gen pre-facelift rear-end configuration and pre-molded 4 backup radar sensor holes. This lower rear bumper cover helps restore the exterior lower fascia area after cracking, impact damage, deformation, scraping, or collision repair. Its molded profile is designed to correspond with the specified rear bumper configuration while retaining the required sensor-hole layout. This listing includes the standalone rear lower bumper cover only – NI1100312 / OEM: 85022-6MA5H, finished in automotive-grade black.

Interchange Part Numbers

Please compare your vehicle trim, rear bumper configuration, sensor layout, and reference numbers with the information below before ordering.

Key Features

• Standalone rear lower bumper cover replacement

• Designed for 2019-2022 Nissan Altima Limited, SL, and Platinum trims

• 6th Gen pre-facelift rear fascia configuration

• Pre-molded with 4 backup radar sensor holes

• Automotive-grade black finish

• Molded profile for the corresponding rear bumper and lower fascia layout

• Suitable for collision repair, exterior restoration, and damaged lower bumper replacement

Technical Fitment Notes

This rear lower bumper cover is intended specifically for the 2019-2022 Nissan Altima 6th Gen pre-facelift Limited, SL, and Platinum configuration. The molded lower fascia profile incorporates 4 pre-molded backup radar sensor holes as part of the bumper design. These openings are an important configuration detail when comparing this replacement with the existing rear bumper component. Important: This component is intended for vehicles equipped with the corresponding 4 backup radar sensor hole configuration. It should not be treated as interchangeable with a smooth non-sensor lower bumper cover or another rear fascia configuration that uses a different sensor-hole or mounting layout. When matched to the correct vehicle and bumper configuration, this lower cover is designed as a direct replacement-style exterior body component for the corresponding mounting locations.

Package Includes

• 1 × Rear Bumper Cover Lower

Total: 1 Piece – Standalone Rear Lower Bumper Cover Only

Important Component Notice

This listing includes only the rear lower bumper cover specifically stated in the Package Includes section. Backup radar sensors, sensor hardware, upper bumper cover, trim pieces, reflectors, brackets, retainers, absorber components, reinforcement bars, exhaust trim components, fasteners, clips, and other surrounding parts are not included unless specifically stated otherwise. The component includes the described pre-molded 4 backup radar sensor holes only. Electronic sensors and related hardware are not included. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the Product Description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original rear bumper component, vehicle trim, fascia configuration, sensor-hole layout, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the 2019-2022 Nissan Altima Limited, SL, and Platinum 6th Gen pre-facelift configuration with 4 backup radar sensor holes. Please confirm these features and the listed interchange numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. or Nissan North America, Inc. Nissan® and Altima® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, sensor configuration, mounting points, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Overview

Restore a damaged rear end with this OE-style Rear Bumper Cover Fascia Bare Shell, designed as a standalone aftermarket replacement for compatible post-facelift Honda Civic Coupe applications using the matching Sport / Si-style rear fascia configuration. Constructed from flexible automotive-grade plastic, the panel follows the original-style rear body contour and compatible mounting layout.

Package Includes

This listing includes the rear bumper fascia main shell only.

The following components are NOT included:

• Center exhaust valance / diffuser

• Rear reflectors or related lighting components

• Side retainers, brackets, clips, or installation hardware

• Additional rear bumper trim unless specifically stated

Compatible original components may be reused when applicable.

Paint & Installation Notice

The bumper cover is supplied primed and unpainted and requires professional surface preparation, color matching, and final paint before installation. Always test fit before painting, drilling, cutting, or permanent modification to verify panel alignment and mounting points. Previous collision damage, worn retainers, damaged brackets, or distorted mounting areas may affect installation and should be inspected before fitting the replacement panel. Professional body-shop preparation and installation are recommended. Painted, installed, drilled, cut, damaged, or permanently modified products may not qualify for return under the VELNOX Auto Return Policy.

Folded Shipping & Unboxing Notice

Because of its flexible construction, the bumper cover may be professionally folded and securely packed inside a reinforced shipping carton to help reduce oversized-carrier shipping costs. Temporary bends, waves, creases, or packaging impressions may appear after unpacking and do not necessarily indicate permanent damage.

After unpacking:

1. Remove all protective packaging.

2. Place the bumper cover in a warm, clean area.

3. Allow sufficient time for the panel to recover its molded shape.

4. Apply low, controlled heat gradually and evenly only if necessary.

5. Confirm shape recovery before test fitting and paint preparation.

Avoid concentrated direct heat, open flame, or overheating, as excessive heat may damage the primer or permanently deform the panel.

Before Ordering

Compare Partslink HO1100312, OEM 04715-TBG-A00ZZ, the rear fascia design, and mounting locations with your original bumper before purchase. Confirm that any required center exhaust valance / diffuser and related trim components are available for reuse or separate replacement.

Compatibility Disclaimer

This product is an aftermarket replacement and restoration package and is not manufactured or supplied by Honda Motor Co., Ltd. OEM reference numbers, North American interchange numbers, vehicle names, trim names and body-style descriptions are provided solely for product identification and compatibility verification. Their use does not indicate that these products are genuine Honda OEM parts. Lighting installation requirements may vary depending on the vehicle’s original wiring, connectors and equipment configuration. Honda®, Civic® and related trademarks are the property of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, endorsed by or authorized by Honda Motor Co., Ltd.

Product Overview

Restore a damaged rear end with this OE-style Rear Bumper Cover Fascia Bare Shell, designed as a standalone aftermarket replacement for post-facelift Honda Civic Sedan applications. Constructed from flexible automotive-grade plastic, the panel follows the original-style rear body contour and compatible mounting layout. It is supplied in a primed, unpainted finish for professional paint preparation and color matching.

Package Includes

This listing includes the rear bumper fascia main shell only.

The following components are NOT included:

• Continuous rear lower valance / lower lip

• Rear corner bezels or garnish pieces

• Reflectors or related lighting components

• Side retainers, brackets, clips, or installation hardware

• Additional rear bumper trim unless specifically stated

Compatible original components may be reused when applicable or replaced separately as needed.

Paint & Installation Notice

The bumper cover requires professional surface preparation, color matching, and final paint before installation. Always test fit before painting, drilling, cutting, or permanent modification to verify panel alignment and mounting points. Previous collision damage, worn retainers, damaged brackets, or distorted mounting areas may affect installation and should be inspected before fitting the replacement panel. Professional body-shop preparation and installation are recommended. Painted, installed, drilled, cut, damaged, or permanently modified products may not qualify for return under the VELNOX Auto Return Policy.

Folded Shipping & Unboxing Notice

Because of its flexible construction, the bumper cover may be professionally folded and securely packed inside a reinforced shipping carton to help reduce oversized-carrier shipping costs. Temporary bends, waves, creases, or packaging impressions may appear after unpacking and do not necessarily indicate permanent damage.

After unpacking:

1. Remove all protective packaging.

2. Place the bumper cover in a warm, clean area.

3. Allow sufficient time for the panel to recover its molded shape.

4. Apply low, controlled heat gradually and evenly only if necessary.

5. Confirm shape recovery before test fitting and paint preparation.

Avoid concentrated direct heat, open flame, or overheating, as excessive heat may damage the primer or permanently deform the panel.

Before Ordering

Compare Partslink HO1100311, OEM 04715-TBA-A10ZZ, the rear fascia design, and mounting locations with the original bumper before purchase. Confirm that the required lower valance, corner bezels, retainers, and related trim components are available for reuse or separate replacement.

Compatibility Disclaimer

This product is an aftermarket replacement and is not manufactured or supplied by Honda Motor Co., Ltd. OEM reference numbers, North American interchange numbers, vehicle names, trim names and body-style descriptions are provided solely for product identification and compatibility verification. Their use does not indicate that this product is a genuine Honda OEM part. Honda®, Civic® and related trademarks are the property of Honda Motor Co., Ltd. VELNOX Auto is not affiliated with, sponsored by, endorsed by or authorized by Honda Motor Co., Ltd.

Product Overview

Restore your Toyota Camry’s rear exterior appearance with this aftermarket rear bumper cover replacement, designed specifically for 2012–2014 Toyota Camry High-End SE & Sport trim configurations. Constructed from durable automotive-grade impact-resistant plastic, this standalone rear fascia shell features a primed black ready-to-paint finish and is ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

What’s Not Included

This listing includes the rear bumper cover fascia shell only. Lower valance components, reflectors, mounting brackets, retainers, reinforcement components, installation hardware, and other surrounding bumper accessories are not included unless specifically stated in the package contents.

Before You Order

Please verify your vehicle year, trim configuration, rear bumper design, and reference numbers before purchasing. This rear bumper cover is designed specifically for 2012–2014 Toyota Camry High-End SE & Sport trims and does not fit Standard LE or Luxury XLE bumper configurations.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, temporary flexing or minor shape variation may occur during shipping. Allow the bumper cover to rest at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Camry® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore your Toyota Camry’s rear exterior appearance with this aftermarket rear bumper cover replacement, designed specifically for 2012–2014 Toyota Camry Standard LE & Luxury XLE trim configurations. Constructed from durable automotive-grade impact-resistant plastic, this standalone fascia shell features a primed finish ready for professional preparation, painting, and color matching. Ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

What’s Not Included

This listing includes the rear bumper cover fascia shell only. Lower valance components, reflectors, brackets, retainers, reinforcement components, mounting hardware, and other surrounding bumper accessories are not included unless specifically stated in the package contents.

Before You Order

Please verify your vehicle year, trim configuration, rear bumper design, and reference numbers before purchasing. Designed specifically for 2012–2014 Toyota Camry Standard LE & Luxury XLE trims. Does not fit High-End SE or Sport bumper configurations.

Paint & Installation Notice

This bumper cover is supplied in a primed, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Camry® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

This rear bumper cover replacement is designed for 2013–2015 Toyota RAV4 LE & XLE pre-facelift models without parking sensor holes. Formed from durable automotive-grade impact-resistant plastic, the bumper cover is supplied in a primed black finish for professional prep and repainting. Its standard rear fascia layout is intended to replace an original bumper cover that has been cracked, scraped, dented, collision-damaged, or previously repaired.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

Fitment Notes

This version is intended for 2013–2015 Toyota RAV4 LE & XLE standard rear bumper configurations without factory parking sensor holes. Before ordering, inspect your original bumper for sensor-hole layout, reflector positions, lower openings, mounting locations, and overall fascia shape. A sensor-equipped bumper or a different trim layout may require another version.

Parts Not Included

The listing includes the rear bumper cover shell only. Reflectors, lower valance or garnish pieces, parking sensors, brackets, retainers, reinforcement components, mounting hardware, and other surrounding rear bumper parts are not included unless specifically stated in the package contents.

Paint Preparation & Installation

The supplied primed black surface is intended for refinishing and is not the vehicle’s final exterior color. Test-fit the bumper before paintwork. Final sanding or preparation, color matching, painting, and professional installation are recommended to help achieve proper alignment and a clean finished appearance.

Shipping & Handling

Due to the size and flexible nature of bumper fascia panels, minor temporary flexing may occur while the part is packaged and transported. After unpacking, allow the bumper cover to rest at room temperature and return to its normal shape before test-fitting or refinishing.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and RAV4® are registered trademarks of Toyota Motor Corporation. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, sensor configuration, and existing components before purchase.

Product Overview

Restore your Toyota Corolla’s rear exterior appearance with this aftermarket rear bumper cover replacement, designed specifically for 2014–2016 Toyota Corolla S & Special Edition pre-facelift trims. Constructed from durable automotive-grade impact-resistant plastic, this rear bumper fascia shell features a primed black finish and is ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

Before You Order

Please verify your vehicle year, trim configuration, rear bumper design, and reference numbers before purchasing. Compare the bumper shape, lower openings, reflector locations, mounting points, and reference numbers with your existing part to confirm compatibility. Designed specifically for 2014–2016 Toyota Corolla S & Special Edition pre-facelift trims. Not intended for L, LE, LE Eco, or other bumper configurations.

What’s Not Included

This listing includes the rear bumper cover fascia shell only. Lower valance or garnish components, reflectors, brackets, retainers, reinforcement components, and mounting hardware are not included unless specifically stated in the package contents.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Corolla® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, interchange numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore your Toyota Corolla’s rear exterior appearance with this aftermarket rear bumper cover replacement, designed specifically for 2014–2016 Toyota Corolla L, LE, and LE Eco pre-facelift trims. Constructed from durable automotive-grade impact-resistant plastic, this rear bumper fascia shell features a primed black finish and is ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

Before You Order

Please verify your vehicle year, trim configuration, rear bumper design, and reference numbers before purchasing. Compare the bumper shape, lower openings, reflector locations, mounting points, and reference numbers with your existing part to confirm compatibility. Designed specifically for 2014–2016 Toyota Corolla L, LE, and LE Eco pre-facelift trims. Not intended for other bumper or trim configurations.

What’s Not Included

This listing includes the rear bumper cover fascia shell only. Lower valance or garnish components, reflectors, brackets, retainers, reinforcement components, and mounting hardware are not included unless specifically stated in the package contents.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Corolla® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, interchange numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore your Toyota Camry’s rear exterior appearance with this aftermarket rear bumper cover replacement, designed specifically for 2015–2017 Toyota Camry SE & XSE trim configurations. Constructed from durable automotive-grade impact-resistant plastic, this standalone fascia shell features a primed black, ready-to-paint finish and provides a practical replacement for a cracked, scraped, damaged, or collision-worn original bumper cover.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

Before You Order

Please verify your vehicle year, trim configuration, rear bumper design, and reference numbers before purchasing. Designed specifically for 2015–2017 Toyota Camry SE & XSE trims. Does not fit LE or XLE bumper configurations.

What’s Not Included

This listing includes the rear bumper cover fascia shell only. Lower valance components, reflectors, brackets, retainers, reinforcement components, and mounting hardware are not included unless specifically stated in the package contents.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Camry® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore your Toyota Camry’s rear exterior appearance with this aftermarket rear bumper cover replacement, designed specifically for 2015–2017 Toyota Camry LE & XLE trim configurations. Constructed from durable automotive-grade impact-resistant plastic, this standalone fascia shell features a primed black, ready-to-paint finish and provides a practical replacement for a cracked, scraped, damaged, or collision-worn original bumper cover.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

Before You Order

Please verify your vehicle year, trim configuration, rear bumper design, and reference numbers before purchasing. Designed specifically for 2015–2017 Toyota Camry LE & XLE trims. Does not fit SE or XSE bumper configurations.

What’s Not Included

This listing includes the rear bumper cover fascia shell only. Lower valance components, reflectors, brackets, retainers, reinforcement components, and mounting hardware are not included unless specifically stated in the package contents.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Camry® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Description

This Rear Bumper Cover Replacement is designed for 2016-2018 Nissan Altima Base S, SR, SV, and SL Trims Only with the mid-cycle facelift rear-end configuration and smooth non-sensor panel layout. The bumper cover serves as the exterior rear fascia shell and is suitable for replacing a cracked, scraped, dented, deformed, or collision-damaged original rear bumper cover. Its molded profile is designed to correspond with the specified facelift rear-body contours and surrounding mounting areas. This listing includes the standalone rear bumper cover shell only – NI1100293 / OEM: 85022-9HS0H, finished in primed black.

Interchange Part Numbers

Please compare your vehicle trim, rear bumper configuration, and reference numbers with the information below before ordering.

Key Features

• Standalone 1-piece rear bumper cover replacement shell

• Designed for 2016-2018 Nissan Altima mid-cycle facelift models

• Suitable for Base S, SR, SV, and SL trim applications

• Smooth non-sensor rear bumper configuration

• Molded fascia profile for the corresponding rear-body layout

• Primed black surface ready for proper paint preparation and refinishing

• Suitable for collision repair, exterior restoration, and damaged bumper replacement

Technical Fitment Notes

This rear bumper cover is intended specifically for the 2016-2018 Nissan Altima mid-cycle facelift configuration. The molded fascia profile is designed around the corresponding rear-end layout, including the outer corner contours, lower fascia structure, and mounting locations. Important: This bumper cover is intended for the smooth non-sensor configuration. It should not be treated as interchangeable with rear bumper covers that use factory-molded parking sensor openings or another fascia configuration with different openings or mounting points. When matched to the correct vehicle application and bumper configuration, this cover is designed as a direct replacement-style exterior body component for the corresponding mounting locations.

Package Includes

• 1 × Rear Bumper Cover Face Shell

Total: 1 Piece – Standalone Rear Bumper Cover Shell Only

Important Component Notice

This listing includes only the rear bumper cover shell specifically stated in the Package Includes section. Parking sensors, sensor hardware, trim pieces, reflectors, brackets, retainers, absorber components, reinforcement bars, exhaust trim components, fasteners, clips, and other surrounding parts are not included unless specifically stated otherwise. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the Product Description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original rear bumper cover, vehicle trim, fascia configuration, sensor layout, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the 2016-2018 Nissan Altima Base S, SR, SV, and SL mid-cycle facelift smooth non-sensor configuration. Please confirm your vehicle trim, existing bumper layout, and listed interchange numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. or Nissan North America, Inc. Nissan® and Altima® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, sensor configuration, mounting points, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Overview

Designed for 2016–2018 Toyota RAV4 Limited post-facelift models equipped with four rear backup radar sensor holes, this aftermarket rear bumper cover provides the correct premium-trim fascia layout for collision repair or exterior restoration. Molded from durable automotive-grade impact-resistant plastic, the cover is supplied in a primed black finish for professional preparation and painting. The factory-style sensor-hole layout helps simplify reuse or transfer of the corresponding rear parking-assist components when the original bumper has been cracked, scraped, deformed, or impact damaged.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

Sensor & Fitment Verification

This bumper cover is intended specifically for 2016–2018 Toyota RAV4 Limited post-facelift configurations with four pre-molded rear sensor holes. Before ordering, compare the sensor-hole count and placement, reflector areas, lower bumper contour, mounting points, and reference numbers with your existing part. Non-sensor versions or other trim layouts may require a different rear fascia.

Parts Not Included

This listing includes the rear bumper cover shell only. Parking sensors, sensor retainers or brackets, reflectors, lower garnish or valance components, reinforcement parts, mounting hardware, and other surrounding rear bumper components are not included unless specifically listed in the package contents.

Refinishing & Installation

The bumper cover arrives in a primed black, unpainted finish intended for professional refinishing. Test-fit the part before painting to verify the sensor locations, surrounding component alignment, and mounting points. Final surface preparation, color matching, painting, and professional installation are recommended.

Packaging & Handling

Because rear bumper covers are large and flexible, minor temporary flexing can occur during packaging and transportation. After unpacking, allow the panel to rest at room temperature and recover its normal shape before test-fitting or beginning paint preparation.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and RAV4® are registered trademarks of Toyota Motor Corporation. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, sensor configuration, and existing components before purchase.

Product Overview

This aftermarket rear bumper cover is tailored for 2016–2018 Toyota RAV4 LE & XLE post-facelift models without factory parking sensor holes. Built from durable automotive-grade impact-resistant plastic, the fascia comes in a primed black finish for professional prep and repainting. It is a practical choice for replacing a rear bumper cover with cracks, scrapes, impact damage, deformation, or previous repair work while preserving the standard LE/XLE rear bumper profile.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

Fitment Verification

This version is intended for 2016–2018 Toyota RAV4 LE & XLE post-facelift configurations without parking sensor holes. Before purchase, compare the rear bumper contour, reflector positions, lower openings, mounting locations, sensor-hole layout, and reference numbers with your original part. Sensor-equipped or trim-specific rear bumper designs may require a different fascia.

Components Not Included

This listing includes the rear bumper cover shell only. Reflectors, lower garnish or valance pieces, parking sensors, brackets, retainers, reinforcement components, mounting hardware, and other surrounding rear bumper parts are not included unless specifically listed in the package contents.

Refinishing & Installation

The bumper cover is supplied in a primed black, unpainted finish and requires final surface preparation, color matching, and painting before installation. Test-fitting before paintwork is strongly recommended. Professional body-shop preparation and installation are recommended to help ensure proper alignment and finish quality.

Packaging & Shape Recovery

Rear bumper covers are large, flexible exterior panels and may show minor temporary flexing during packaging or transit. After unpacking, allow the part to rest at room temperature and recover its normal contour before test-fitting, preparation, or painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and RAV4® are registered trademarks of Toyota Motor Corporation. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, sensor configuration, and existing components before purchase.

Product Description

This Rear Bumper Cover Replacement is designed for 2016-2019 Nissan Sentra SL, Nismo, Premium, and SR Trims Only with the 7th Gen post-facelift rear-end configuration and pre-molded 4 backup radar sensor holes. The bumper cover serves as the exterior rear fascia shell and is suitable for replacing a cracked, scraped, dented, deformed, or collision-damaged original rear bumper cover. Its molded profile is designed to correspond with the specified post-facelift rear-body contours while retaining the required sensor-hole configuration. This listing includes the standalone rear bumper cover shell only – NI1100312 / OEM: 62022-4FU1H, finished in primed black.

Interchange Part Numbers

Please compare your vehicle trim, rear bumper configuration, sensor layout, and reference numbers with the information below before ordering.

Key Features

• Standalone 1-piece rear bumper cover replacement shell

• Designed for 2016-2019 Nissan Sentra SL, Nismo, Premium, and SR trims

• 7th Gen post-facelift rear fascia configuration

• Pre-molded with 4 backup radar sensor holes

• Primed black surface ready for proper paint preparation and refinishing

• Molded profile for the corresponding rear-body and mounting layout

• Suitable for collision repair, exterior restoration, and damaged bumper replacement

Technical Fitment Notes

This rear bumper cover is intended specifically for the 2016-2019 Nissan Sentra 7th Gen post-facelift SL, Nismo, Premium, and SR configuration. The molded fascia profile incorporates 4 pre-molded backup radar sensor holes as part of the bumper shell design. These openings are an important configuration detail when comparing this replacement with the existing rear bumper cover. Important: This bumper cover is intended for vehicles equipped with the corresponding 4 backup radar sensor hole configuration. It should not be treated as interchangeable with a smooth non-sensor bumper cover or another rear fascia configuration that uses a different sensor-hole or mounting layout. When matched to the correct vehicle, trim, and bumper configuration, this cover is designed as a direct replacement-style exterior body component for the corresponding mounting locations.

Package Includes

• 1 × Rear Bumper Cover Face Shell

Total: 1 Piece – Standalone Rear Bumper Cover Shell Only

Important Component Notice

This listing includes only the rear bumper cover shell specifically stated in the Package Includes section. Backup radar sensors, sensor hardware, trim pieces, reflectors, brackets, retainers, absorber components, reinforcement bars, exhaust trim components, fasteners, clips, and other surrounding parts are not included unless specifically stated otherwise. The bumper cover includes the described 4 pre-molded backup radar sensor holes only. Electronic sensors and related hardware are not included. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the Product Description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original rear bumper cover, vehicle trim, rear fascia configuration, backup sensor layout, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the 2016-2019 Nissan Sentra SL, Nismo, Premium, and SR 7th Gen post-facelift configuration with 4 backup radar sensor holes. Please confirm these features and the listed interchange numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. or Nissan North America, Inc. Nissan® and Sentra® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, sensor configuration, mounting points, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Description

This Rear Bumper Cover Replacement is designed for 2016-2019 Nissan Sentra Standard Base S and SV Trims Only with the 7th Gen post-facelift rear-end configuration and smooth non-sensor deep-pocket trailing layout. The bumper cover serves as the exterior rear fascia shell and is suitable for replacing a cracked, scraped, dented, deformed, or collision-damaged original rear bumper cover. Its molded profile is designed to correspond with the specified post-facelift rear-body contours and surrounding mounting areas. This listing includes the standalone rear bumper cover shell only – NI1100311 / OEM: 62022-4FU0A.

Interchange Part Numbers

Please compare your vehicle trim, rear bumper configuration, sensor layout, and reference numbers with the information below before ordering.

Key Features

• Standalone 1-piece rear bumper cover replacement shell

• Designed for 2016-2019 Nissan Sentra Base S and SV trims

• 7th Gen post-facelift rear fascia configuration

• Smooth non-sensor bumper layout

• Deep-pocket trailing rear fascia design

• Molded profile for the corresponding rear-body and mounting layout

• Suitable for collision repair, exterior restoration, and damaged bumper replacement

Technical Fitment Notes

This rear bumper cover is intended specifically for the 2016-2019 Nissan Sentra 7th Gen post-facelift configuration. The molded fascia profile is designed around the corresponding rear-end layout, including the outer corner contours, deep-pocket trailing areas, lower fascia structure, and mounting locations. Important: This bumper cover is intended for the smooth non-sensor configuration. It should not be treated as interchangeable with rear bumper covers that use factory-molded parking sensor openings or another rear fascia configuration with different openings or mounting points. When matched to the correct vehicle, trim, and bumper configuration, this cover is designed as a direct replacement-style exterior body component for the corresponding mounting locations.

Package Includes

• 1 × Rear Bumper Cover Face Shell

Total: 1 Piece – Standalone Rear Bumper Cover Shell Only

Important Component Notice

This listing includes only the rear bumper cover shell specifically stated in the Package Includes section. Parking sensors, sensor hardware, trim pieces, reflectors, brackets, retainers, absorber components, reinforcement bars, exhaust trim components, fasteners, clips, and other surrounding parts are not included unless specifically stated otherwise. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the Product Description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original rear bumper cover, vehicle trim, rear fascia configuration, sensor layout, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the 2016-2019 Nissan Sentra Standard Base S and SV 7th Gen post-facelift smooth non-sensor configuration. Please confirm your vehicle trim, existing bumper layout, and listed interchange numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. or Nissan North America, Inc. Nissan® and Sentra® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, sensor configuration, mounting points, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Overview

Refresh the rear appearance of your Corolla with this aftermarket rear bumper cover replacement, designed specifically for 2017–2019 Toyota Corolla SE & XSE facelift models. Made from durable automotive-grade impact-resistant plastic, this rear fascia shell comes in a primed black finish for professional preparation and painting. It is a practical solution for replacing a cracked, scraped, impact-damaged, or previously repaired factory bumper cover while maintaining the sportier SE/XSE rear-end styling.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

Fitment Check Before Purchase

Please confirm your vehicle year, SE/XSE trim configuration, rear bumper profile, lower openings, reflector locations, mounting points, and reference numbers before ordering. This bumper cover is designed specifically for 2017–2019 Toyota Corolla SE & XSE facelift configurations and is not intended for LE, XLE, or other rear bumper layouts.

What’s Not Included

This listing includes the rear bumper cover fascia shell only. Lower valance or garnish components, reflectors, brackets, retainers, reinforcement components, mounting hardware, and other surrounding rear bumper accessories are not included unless specifically listed in the package contents.

Paint & Installation Notice

The bumper cover is supplied in a primed black, unpainted finish and requires final surface preparation, paint matching, and refinishing before installation. Test-fitting before painting is strongly recommended. Professional body-shop preparation and installation are recommended to help ensure proper alignment and finish quality.

Shipping & Packaging Note

Because automotive bumper covers are large and flexible, minor temporary flexing may occur during transportation. After unpacking, allow the bumper cover to rest at room temperature and recover its natural shape before test-fitting, preparation, or painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Corolla® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Give your Corolla’s rear end a clean, factory-style refresh with this aftermarket rear bumper cover, developed for 2017–2019 Toyota Corolla LE & XLE trim configurations. Made from durable automotive-grade impact-resistant plastic, this 1-piece fascia shell is supplied in a primed black finish for professional prep and painting. It is a practical replacement for bumper covers affected by cracks, scrapes, impact damage, or previous body repair.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

Fitment Check Before Purchase

Confirm your vehicle year, trim level, bumper profile, mounting locations, and reference numbers before ordering.This rear bumper cover is intended for 2017–2019 Toyota Corolla LE & XLE configurations. Compare the lower openings, reflector areas, and mounting points with your original bumper to help confirm the correct application.

What’s Not Included

This listing is for the rear bumper cover shell only. Reflectors, lower garnish or valance pieces, brackets, retainers, reinforcement components, mounting hardware, and other surrounding rear bumper parts are not included unless specifically listed in the package contents.

Paint & Installation Notice

The bumper cover is supplied in a primed black, unpainted finish and requires final surface preparation, paint matching, and refinishing before installation. Test-fitting before painting is strongly recommended. Professional body-shop preparation and installation are also recommended to help ensure proper alignment and finish quality.

Shipping & Packaging Note

Because bumper covers are large and flexible, minor temporary flexing may occur during transportation. After unpacking, allow the bumper cover to rest at room temperature and recover its natural shape before test-fitting or refinishing.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Corolla® are registered trademarks of Toyota Motor Corporation. Vehicle names, trademarks, OEM numbers, Partslink numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore your Toyota Camry’s rear exterior appearance with this aftermarket rear bumper cover replacement, designed specifically for 2018–2020 Toyota Camry SE & XSE pre-facelift models. Constructed from durable automotive-grade impact-resistant plastic, this rear bumper fascia shell features a primed black finish and is ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

Before You Order

Please verify your vehicle year, trim configuration, rear bumper design, and reference numbers before purchasing. Designed specifically for 2018–2020 Toyota Camry SE & XSE trims. Does not fit LE or XLE bumper configurations.

What’s Not Included

This listing includes the rear bumper cover fascia shell only. Lower valance or garnish components, reflectors, brackets, retainers, reinforcement components, and mounting hardware are not included unless specifically stated in the package contents.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Camry® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, Partslink numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

Restore your Toyota Camry’s rear exterior appearance with this aftermarket rear bumper cover replacement, designed specifically for 2018–2020 Toyota Camry LE & XLE pre-facelift models. Constructed from durable automotive-grade impact-resistant plastic, this rear bumper fascia shell features a primed black finish and is ideal for replacing a cracked, scraped, damaged, or collision-worn original bumper cover.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

Before You Order

Please verify your vehicle year, trim configuration, rear bumper design, and reference numbers before purchasing. Designed specifically for 2018–2020 Toyota Camry LE & XLE pre-facelift models. Does not fit SE or XSE bumper configurations.

What’s Not Included

This listing includes the rear bumper cover fascia shell only. Lower valance or garnish components, reflectors, brackets, retainers, reinforcement components, mounting hardware, and other surrounding rear bumper accessories are not included unless specifically stated in the package contents.

Paint & Installation Notice

This bumper cover is supplied in a primed black, unpainted finish and requires surface preparation and professional painting before final installation. Professional test-fitting, paint preparation, color matching, and installation are recommended. Existing mounting hardware and surrounding bumper components should be inspected before installation and replaced when necessary.

Shipping & Packaging Note

Due to the size and flexible construction of automotive bumper covers, minor temporary flexing may occur during shipping. Allow the bumper cover to return to its natural shape at room temperature before test-fitting, preparation, and painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Camry® are registered trademarks of Toyota Motor Corporation. References to vehicle makes, models, trademarks, OEM numbers, interchange numbers, Hollander identifiers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, and existing part before purchase.

Product Overview

This aftermarket rear bumper cover is designed for 2019–2021 Toyota RAV4 Limited pre-facelift models equipped with four rear backup radar sensor holes. Made from durable automotive-grade impact-resistant plastic, the fascia comes in a primed black finish for professional preparation and repainting. Its four pre-molded sensor openings are configured for the corresponding Limited-trim rear bumper layout, making it suitable for collision repair, exterior restoration, or replacement of a damaged original fascia.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

Sensor & Fitment Check

This rear bumper cover is intended specifically for 2019–2021 Toyota RAV4 Limited pre-facelift configurations with four pre-molded backup radar sensor holes. Before ordering, compare the sensor-hole count and placement, reflector areas, lower bumper contour, mounting points, and reference numbers with your original part. Non-sensor versions or other trim configurations may use a different rear fascia.

Components Not Included

This listing includes the rear bumper cover fascia shell only. Backup radar sensors, sensor brackets or retainers, reflectors, lower garnish or valance pieces, reinforcement components, mounting hardware, and other surrounding rear bumper parts are not included unless specifically stated in the package contents.

Finish & Installation

The bumper cover is supplied in a primed black, unpainted finish intended for professional refinishing. Test-fit the part before painting to confirm sensor-hole positioning, surrounding component alignment, and mounting-point fitment. Proper surface preparation, color matching, painting, and professional installation are recommended.

Packaging & Shape Recovery

Rear bumper covers are large and flexible exterior panels, so minor temporary flexing may occur during packaging or transportation. After unpacking, allow the bumper cover to rest at room temperature and return to its natural contour before test-fitting, preparation, or painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and RAV4® are registered trademarks of Toyota Motor Corporation. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, sensor configuration, and existing components before purchase.

Product Overview

Restore the rear bodywork of your 2019–2021 Toyota RAV4 LE or XLE with this aftermarket bumper cover, configured for pre-facelift models without factory sensor holes. The fascia is formed from durable automotive-grade impact-resistant plastic and supplied in a primed black finish for professional paint preparation and color matching. It provides a clean replacement option when the original rear bumper has suffered cracks, scrapes, deformation, collision damage, or previous repair work.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

Vehicle & Sensor Check

This rear bumper cover is intended for 2019–2021 Toyota RAV4 LE & XLE pre-facelift models without parking sensor holes. Check the original bumper’s sensor layout, reflector locations, lower contour, attachment points, and reference numbers before purchase. Versions equipped with factory sensors or a different trim-specific rear fascia may require another bumper configuration.

Accessories Not Included

Only the rear bumper cover fascia shell is included. Reflectors, lower valance or garnish pieces, parking sensors, sensor brackets, retainers, reinforcement components, installation hardware, and surrounding rear bumper accessories are not included unless specifically stated in the package contents.

Finish & Installation

The primed black surface is preparation-ready and requires final refinishing before installation. Test-fit the bumper first, then complete any necessary surface preparation, paint matching, and final coating. Professional installation is recommended to ensure proper fit around the quarter panels, reflectors, and mounting locations.

Delivery & Shape Recovery

The flexible construction of an automotive bumper fascia may allow minor temporary movement in shape during packaging and transportation. Once unpacked, leave the bumper at room temperature until it returns to its natural contour before beginning fitment checks or paint preparation.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and RAV4® are registered trademarks of Toyota Motor Corporation. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, sensor configuration, and existing components before purchase.

Product Description

This Rear Bumper Cover Replacement is designed for 2019-2022 Nissan Altima Standard S, SR, and SV Trims Only with the 6th Gen pre-facelift rear-end configuration and flush smooth non-sensor slim-reflector pocket layout. The bumper cover serves as the exterior rear fascia shell and is suitable for replacing a cracked, scraped, dented, deformed, or collision-damaged original rear bumper cover. Its molded profile is designed to correspond with the specified pre-facelift rear-body contours, reflector pocket areas, and surrounding mounting locations. This listing includes the standalone rear bumper cover shell only – NI1100311 / OEM: 85022-6CA0H Core Spec.

Interchange Part Numbers

Please compare your vehicle trim, rear bumper configuration, sensor layout, and reference numbers with the information below before ordering.

Key Features

• Standalone 1-piece rear bumper cover replacement shell

• Designed for 2019-2022 Nissan Altima S, SR, and SV trims

• 6th Gen pre-facelift rear fascia configuration

• Flush smooth non-sensor bumper layout

• Slim-reflector pocket configuration

• Molded profile for the corresponding rear-body and mounting layout

• Suitable for collision repair, exterior restoration, and damaged bumper replacement

Technical Fitment Notes

This rear bumper cover is intended specifically for the 2019-2022 Nissan Altima 6th Gen pre-facelift configuration. The molded fascia profile is designed around the corresponding rear-end layout, including the outer corner contours, slim-reflector pocket areas, lower fascia structure, and mounting locations. Important: This bumper cover is intended for the flush smooth non-sensor configuration. It should not be treated as interchangeable with rear bumper covers that use factory-molded parking sensor openings or another rear fascia configuration with different openings or mounting points. When matched to the correct vehicle and bumper configuration, this cover is designed as a direct replacement-style exterior body component for the corresponding mounting locations.

Package Includes

• 1 × Rear Bumper Cover Face Shell

Total: 1 Piece – Standalone Rear Bumper Cover Shell Only

Important Component Notice

This listing includes only the rear bumper cover shell specifically stated in the Package Includes section. Reflectors, parking sensors, sensor hardware, trim pieces, brackets, retainers, absorber components, reinforcement bars, exhaust trim components, fasteners, clips, and other surrounding parts are not included unless specifically stated otherwise. Product images may show surrounding vehicle components for installation reference or identification purposes only. Please review the Product Description and Package Includes section carefully before purchasing.

Before You Order

Please compare your original rear bumper cover, vehicle trim, fascia configuration, sensor layout, reflector pocket layout, mounting points, part shape, and reference numbers with the information provided in this listing before purchase. This listing is for the 2019-2022 Nissan Altima Standard S, SR, and SV 6th Gen pre-facelift smooth non-sensor configuration. Please confirm your vehicle trim, existing bumper layout, and listed interchange numbers before ordering.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Nissan Motor Co., Ltd. or Nissan North America, Inc. Nissan® and Altima® are trademarks or registered trademarks of their respective owners. References to vehicle makes, models, trim names, trademarks, OEM numbers, Partslink numbers, Hollander numbers, and other cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for verifying compatibility with their specific vehicle, trim level, production configuration, sensor configuration, reflector configuration, mounting points, and existing part before purchase. Please compare the listed reference numbers and original component carefully before ordering.

Product Overview

Replace a damaged or worn rear fascia with this aftermarket rear bumper cover, engineered for 2020–2022 Toyota Corolla SE & XSE pre-facelift models. Designed around the more aggressive SE/XSE rear profile, this bumper cover is molded from durable automotive-grade impact-resistant plastic and supplied in a primed black finish for professional prep and painting. It is well suited for collision repair, cosmetic restoration, or replacing a factory bumper cover with cracks, scrapes, deformation, or prior repair damage.

Reference Numbers

Package Includes

• 1x Rear Bumper Cover Face Matrix Shield Shell

Fitment Verification

This rear bumper cover is designed specifically for 2020–2022 Toyota Corolla SE & XSE pre-facelift configurations. Before ordering, compare the overall bumper contour, lower rear openings, reflector positions, mounting points, and reference numbers with the original part on your vehicle. Standard-trim Corolla rear bumper designs may differ from the SE/XSE configuration.

Parts Not Included

This listing is for the rear bumper cover fascia shell only. Lower valance or diffuser-style trim, reflectors, brackets, retainers, reinforcement components, sensors, mounting hardware, and other surrounding rear bumper parts are not included unless specifically stated in the package contents.

Paint & Installation

The bumper cover is supplied in a primed black, unpainted finish and is intended to be professionally refinished to match the vehicle.  Test-fitting before paintwork is strongly recommended. Proper surface preparation, color matching, and professional installation help ensure accurate alignment and a clean finished appearance.

Shipping & Shape Recovery

As a large flexible exterior panel, the bumper cover may experience minor temporary flexing during transit. After unpacking, allow the part to rest at room temperature and recover its natural shape before test-fitting, preparation, or painting.

Compatibility Disclaimer

This product is an aftermarket replacement part and is not manufactured by, authorized by, sponsored by, endorsed by, or affiliated with Toyota Motor Corporation. Toyota® and Corolla® are registered trademarks of Toyota Motor Corporation. Vehicle names, trademarks, OEM numbers, Partslink numbers, interchange references, Hollander identifiers, and related cross-reference information are used solely for product identification and compatibility purposes. Customers are responsible for confirming compatibility with their specific vehicle, trim level, and existing components before purchase.